I've setup Exim4 as an MTA on my VM which has a static IP. I've pointed the MX records both idential to this static IP. I can send out via command line on the VM using Exim commands and receive the mail in my home account no problem, it also displays the correct from address ie rich@mydomain.co.uk
So I'm not sure what's going on with receiving the mail. If I send a mail from my home email to rich@mydomain.co.uk (not real address), I don't get a bounce or anything, it just goes out never to be seen again.
using kubuntu 9.04 on AMD 64,working with ISPconfig panel.I have postfix configured and have no problem getting mails with small attachments, but when they pass certain size I don't get them.Where can I configure this?
I cannot get exim4 to actually deliver any "local delivery only; not on a network".But whatever I do in the config, all mail gets frozen with entries in the log file like:"root@empty R=nonlocal: Mailing to remote domains not supported"Maybe the problem is that there is no fqdn for the computer (and will never be). How can I enable local mail delivery?
I am trying to do something really simple with Exim. I have two machine connected together via a hub. They can ping each other. They each are running openSuse 11.2 and have Exim installed. On each machine from the command line in start Exim as a daemon by typing: sudo /usr/sbin/exim -bd -d and each machine runs through some output and sits there "Listening". Then on either machine I try to send a mail message of the form mail
(or mailx) <user>@<other node> some text EOT
and absolutly nothing happens! I must be doing something wrong or daft which is very basic, but I have searched all over and cannot get it to work.
I have installed F11 on my server bythis article! I have problem with certificatewhen I connectin from clients computers to my mail server for reciving mail! I have warning like this
I do not know where the problem occurs, but when sending mail through FCI mail () on the Gmail e-mail fails to deliver. The logo is not a bug and should be on the list, center, walks etc mails totally normal, but gmail does not pass anything. Nothing in the spam ... I tried to create a new mail to Gmail and send the message, and nothing may be ...
You have no idea where it could be a potential bug? from webmail to send mail to gmail is realized, but through the mail () not ... I thought that the problem is in a blacklist from Google, but a week ago, we changed the IP server (migration) and the problem still persists ..
We moved over from Cpanel using Exim. I was wondering if anyone knew of way to convert the mail so when a user logs in they get to all their mail in their folders. I notice exim has a ton of folders while postfix creates files that act like folders which contain all the emails. I sent up 1 of the emails into the our mail folder that was created by Exim and it can be Subscribed to in Outlook with imap but the emails inside doesn't show up. They both appear as text files so I don't know what the difference is.
I run a mailserver and this is bothering me quite abit. Being going on for about a month now. Running exim4 and dovecot with exim4u. This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
dsghjytyt@yahoo.com retry time not reached for any host after a long failure period
This is a copy of the message, including all the headers. Return-path: <andreas@servar.net> Received: from ip-81-210-201-120.unitymediagroup.de ([81.210.201.120] helo=holly5) by gwdebian.net with esmtpa (Exim 4.72) (envelope-from <andreas@servar.net>) id 1QWpUO-0000yy-ML for dsghjytyt@yahoo.com; Wed, 15 Jun 2011 14:46:32 +0200 MIME-Version: 1.0 Date: Wed, 15 Jun 2011 14:44:16 +0200 X-Priority: 3 (Normal) Content-Type: text/plain; charset="iso-8859-1" Subject: =?iso-8859-1?Q?lizzie_VIAGRA_=C2=AE_-61%_discount?= Content-Transfer-Encoding: quoted-printable From: andreas@servar.net Reply-To: "RE: Your Recent Job" <Posting> To: dsghjytyt@yahoo.com X-Mailer: Microsoft Outlook Express 6.00.2900.2180 Message-ID: <CHILKAT-MID-3b7cf1d5-b3e7-3d78-5c1d-713c0e381cb9@holly5> X-Antivirus: avast! (VPS 110615-0, 15.06.2011), Outbound message X-Antivirus-Status: Clean X-Scanned-By: unscanned primary on gwdebian.net (109.108.198.243); Wed, 15 Jun 2011 14:46:32 +0200 Then alot of random text
I run OSX on my everyday computer so this is not me sending out stuff since the above mail says Microsoft Outlook express has sent it (?) Running a Debian Squeeze server. And I really dont get any other spam due to exim4u setup and spamassasin.
I recently built a mail server with Slackware/Sendmail and basically all works. Mail comes in and goes out. The problem I have is 3 email addresses cannot be sent to from this server. The remote ends are 3 different servers but all run Exim 4.69. I have logged the server exchange and this is what I get: (names have been changed to protect the innocent!!)
I have a fairly standard Exim setup for inbound and outbound mail. Recently our development team has put together a PHP app that allows us to send out bulk mails to our clients. The PHP app uses standard PEAR libraries to initiate an SMTP connection to localhost (application and mail server are on the same box). The idea here is that the application will send out roughly 10'000 emails in a very short time period (60 seconds or so) which Exim will then hold in its queue for delivery.
The problem comes in where after about 50 emails, Exim stops accepting mail and loggs the following error in the exim_main.log file: SMTP command timeout on connection from localhost [127.0.0.1] Could it be that this is because Exim immediately starts delivering the mail and then stops accepting new incoming connections? I thought that increasing the SMTP limits may be the problem here, but even after setting new values in the exim.conf file to the following, I still get the same problem: queue_run_max = 5000 smtp_accept_max = 5000 smtp_accept_queue = 5000
This begs two questions: How do I resolve this? What is the best way for configuring Exim to accept a huge amount of mail into the queue in a very short time period, but then gradually delivery it once it's all in the queue? I've seen some people run separate Exim daemons for incoming and outgoing mail; is this a good solution?
Through yast2 I went to network services-->Mail server and took the standard option. My connection type is Permanent, filled in the outgoing server information and got to the incoming mail screen.
I told it to accept remote SMTP connections, open a port in the firewall and bypassed the downloading section since I just want to directly receive mail (I did however tell it I wanted a daemon to fetchmail). Told it to forward root's mail to me and a delivery mod of Directly. And finished.
The system sends mail out but I can't seem to receive any. What did I do wrong or what else do I need to do?
to avoid automatic start of this mail server (I use qmail). After several months, I did a reboot and exim is started! Looking at the history, I found this command:
Quote: dpkg-reconfigure exim4-config
Maybe this command has restored the init script of exim?
Running Ubuntu 10.4 with happiness and Evolution both for 4 months and always have been able to 'receive' mail by pushing button listed as such; but NOW it is all greyed out. I cannot find or discover how to make it come back 'alive' , so to speak. I have not changed anything that I know of to cause this.
Exim: Is there away to block command when someone telnets to exim's port? Email won't send out unless they authenticate, but if there a way to total block them from typing all together, but still allow the server to receive email? IE, to block this:
I'm in the process of starting a migration from an old postfix server to nice shiney new exim server however there are a few things i'm really not clear on and i'm hoping that some one here could point me in the correct direction. Okay the postfix server at the moment does the follwoing ( i'll try and keep this simple ):
* accepts incoming mail for users on multiple domains and puts the mail in the users mailbox ( external -> internal )
*accepts mail from users on multiple domains to pass on to the outside world ( internal -> external )
Obviously the POP and Imap functions are handled by other daemons.. I'd like to replicate this sort of setup on the new exim box, however the guides i can find only help with configuring the exim system for incoming mails ( external -> internal ) for multiple domains and i cant seem to find a guide that would indicate how to do both ( internal -> external and external -> internal ) on one box. I'm guessing i may have to do some sort of auth to get exim to accept and then handle the internal -> external side of things?
I'm new to openSuse after installing it on my work machine as a replacement for Ubuntu.
I have Evolution mail up and running and all is well other than I am having a problem when receiving mail.
When I first start Evolution, it checks and downloads my new mail without any issues however whilst it is running it won't download any mail, either automatically or manually via the Send & Receive button.
It appears to be checking my accounts (the progress box pops up briefly) and is not reporting any errors, just not downloading until I close Evolution and then restart.
Sending is working perfectly.
I must admit that I "imported" my old mail in a bit of a cack-handed fashion and did have to uninstall/re-install Evolution - I noticed that it uninstalled a few extra packages however when I reinstalled, it only selected the main Evolution packages.
The fact that it is receiving on Evolution start-up I think rules out my settings being incorrect.
I am writing an script for sending emails with ssmtp email client in an appropriate form.I want to know how can I check mail server that I want to send mail to it if it exist and ready to receive email or if not log an error.
I have a nice little interface that generates an exim config file and a script on the server to check for changes. Unfort I cant find where to set the config file location.
E.G. I have my script generate the file to /etc/exim/exim4.conf (could be /usr/share/foo/bar.conf just as easily)
How can I point exim in the direction of that file?
i was asking how to build a CentOS Exim mail server, & gaurantee that all mail messages will be delivered to hotmail inbox ??hotmail said that it will only accept 500 simultanuos connections (=500 messages) to its mail servers from only one IP address, so is there an exim options that i can use to limit messages that sent through the mail server to hotmail to be sent as 500 messages then send another 500 & so on
I am setting up a new email server by following the Flurdy guide. I can send but I can't receive. I can telnet in with both the IP address & telnet mail.domain.com 25 I'm not using or loading shorewall because I will be relying on the firewall that is in the router. I have been following the test section of the flurdy tutorial. I am tailing the mail.log file and only see the status as being different from the example
"status=bounced (mail for domain.com loops back to myself)"
It seems like it is getting through to the server but then getting rejected.
recently I've replaced an old windows mailserver with a new one running 10.04 LTS (postfix - dovecot) but I got a strange problem with MS Outlook 2003 and 2007 on Win XP. These MUAs receive new messages extremely slow. Some of messages are received repeatedly. All I found in /var/log/mail.log is login and then (after 1 minute) disconnection for inactivity. No errors.:
Jul 11 10:36:51 dovecot: pop3-login: Login: user=(user@domain.org), method=NTLM, rip=xxx.xxx.xxx.xxx, lip=xxx.xxx.xxx.xxx Jul 11 10:37:07 dovecot: POP3(user@domain.org): Disconnected for inactivity top=0/0, retr=1/5434, del=0/12, size=954793 nothing more. And outlooks wait and wait reporting "receiving". What they are waiting for? Is there something dovecot should send them?
At the same time Mozilla Thunderbird and Opera Mail on the same network with the same setup don't have any problems. I just don't get it. Does anyone know what to do to get it work please?
Our primary mail server is Exchange 2003 Standard on Windows Server 2003 Standard - don't shout at me; I inherited it already set up this way.I have a couple of hardware identical redundant servers (HP ML350 boxes), all with very fast 2 or 4 disk arrays, multiple core CPUs and plenty of memory, and I am looking at two potential new additions to the infrastructure.
A secondary mail server is high on my list of priories. I've been well and truly bitten by Exchange in the past and given that this particular box has been running four years straight and that it's mail store is dangerously large, having a secondary mail server in place suddenly makes a lot of sense.
A new Exchange 2010 box is currently being set up, but the secondary mail server will remain in place even when the new Exchange server is brought online, so this won't be a wasted exercise.... I also want a gateway box in place to filter and relay mail to the primary server, or to the secondary server if the primary is unavailable. Currently our outer perimeter is:
Untangle running in bridged mode (primarily used for SPAM filtering, URL blacklisting, and very little else) Exchange 2003 sits behind the Untangle box. This is how I want to end up:
CISCO >> Draytek >> Ubuntu gateway >> Exchange/secondary mail server
I know I could replace/remove the Draytek but I want it to remain for several reasons, including lots of VPN dial-in users already configured and that it offers us an additional layer of email antivirus scanning before things hit the Exchange box. No point switching all of our remote workers over to new tunnels unnecessarily...
I have done some research and have started testing a pilot secondary mail server using Ubuntu/postfix DNS is properly set up and MX records and reverse PTR records are all present and correct, and things are looking encouraging so far. Before I go out over deep waters and start to flounder, has anyone who has done something like this got any obvious howlers I should be looking to avoid ?
I set up my mail server using the guide here: [URL] I am able to receive mail, I can send mail locally, but I can't send to external addresses. This is in my mail.log: Quote: Jun 30 14:40:43 Server postfix/smtp[10725]: 2FD9322015BF: to=<myemail@gmail.com>, relay=none, delay=1634, delays=1484/0.02/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.65.27]:25: Connection timed out)
The scenario: We have an external server that runs HTTP/DB servers for out shop system. Then, there's our local, in-house infrastructure that runs a.. yeah... Exchange 2010. The shop system on the external server needs to send mails to customers (order confirmations, invoices, etc.). seing as sending them directly through the local MTA (Postfix) would cause mail delivery problems because of reverse DNS issues, i've set the Postfix MTA to act as a satellite to our in-house Exchange Server, so the Exchange sends the mail instead, giving recipient mail servers a valid reverse DNS lookup.
Now, mails sent by the (proprietary, uneditable) shop system are relayed correctly and sent to the target e-mail address. My problem is: Mails not sent by the shop system, but by our own PHP scripts which run on that same external servers, are NOT relayed properly. So the Exchange is fine with the mails sent by the shop system, but not the mails sent by our scripts. This is what i get in the mail.log: The successfully relayed mail sent by the shop system:
Two exchange servers internally. One is setup for example.com (192.168.1.10) and the other is setup for example2.com (192.168.1.20) Both are behind a single public IP.
I want to use postfix to sit in front of the two exchange servers. Postfix will accept mail for both domains and relay to the appropriate server. I have postfix installed with only defaults at this point.
I have a problem relate to posttfix.I want to mirgare postfix mail server to exchange 2010 mail server but I can't do it,u can help me.You can show me have to do configure postfix and exchange how to?
How do I make a local mail server that itself is a client to a WAN mail server.I want the local mail server to query new mail every 30 minutes from the WAN server.
I handle several hundreds of domains. Mails are handled with google apps (but previously I used to have a full postfix/courrier setup with virtualhosting). Now what I need is to be able to send mail (newsletter etc...) from my web servers, but I don't need to receive mail on these servers.
