Ubuntu :: Thunderbird - Sync Sent Mail With Mail Server?

Apr 23, 2011

Using Thunderbird 3.1.8. How do I sync the local sent mail folder with the sent mail folder on the server so I have a copy of the sent email

View 1 Replies


ADVERTISEMENT

Ubuntu :: Can't Send From Own Mail Server With Mail Client (Thunderbird Or Evolution)?

Jun 1, 2011

I have set up postfix and dovecot as per the Ubuntu anual and appear to have a functioning mail server.Using the sendmail command I can send mail and I receive mail in ~/Maildir. Using Thunderbird I can read any mails received but I can't send any mail from Thunderbird. I have tried with both STARTTLS and SSL/TLS and whilst I get the prompt for a password I keep getting the message my password for my server is wrong.I have ports 25, 465, 587 and 993. Is that all the right ports?When I ping my domain name it resolves to my router name whereas I believe it should resolve to my IP. Could there be a problem with my host file? I've had a play but to no avail.Here's the error in mail.log.

Code:
westwood@westwood-desktop:/etc$ tailf /var/log/mail.log
Jun 1 19:00:33 westwood-desktop postfix/smtpd[2376]: warning: localhost.localdomain[127.0.0.1]: SASL LOGIN

[code]....

View 2 Replies View Related

OpenSUSE :: Thunderbird: No POP3 Mail Server?

Feb 25, 2010

I am trying to install Mozilla Thunderbird email client. When I configure this program, it defaults to IMAP4-type incoming mail server (Port 143) instead of POP3 (Port 110) which my ISP uses. I did not see POP3 anywhere in the available dialog boxes. Is there any way to get Thunderbird to use POP3 in opensuse 11.2 Gnome Edition?

View 3 Replies View Related

Ubuntu :: Thunderbird & DavMail To Receive MS Exchange Server Mail

Jan 31, 2010

Seems quite a lot out there are finding it simple enough getting Thunderbird/Davmail to work, yet I've been at it for days now and still no luck. I've finally given up altogether with Evolution last week, as it seems from weeks of reading and trying, there just isn't a solution for it to work with Exchange Server mail. Yes I tried brutus and its web sites are down so to get additions such as Brutus Keyring is impossible. (its all a long story for another day)Evolution is now uninstalled and in the bin.So now Im into the 5th day trying with Davmail and Thunderbird to get emails from my company mail exchange server.I am sure Im going to have better luck with Thunderbird from what Ive read so far, but it still eludes me how to set it up with Devmail and the information Ive found so far is not very clear. I am sure I am just missing the most simplest step somewhere along the line.

Can someone please post a detailed instruction on how to configure both Thunderbird and Devmail to work together and also how to test if Davmails is working?I can easily access my company emails via OWA with URl... from my home internet, so no issue there.From the efforts of trying to get Evol to work where it came up with the error. "Evolution connector is not compatible with Exchange 5.5", I assume our company server is running an MS exchange server version 2003 or older.

View 3 Replies View Related

Ubuntu :: Cannot Get Thunderbird 3.0.4 To Work Just Keeps Timing Out Trying To Access Mail Server Pop.1and1.co.uk?

May 29, 2010

Had to do a fresh install of 10.04 as upgrade went pear shaped. Now I cannot get hunderbird 3.0.4 to work just keeps timing out trying to access mail server pop.1and1.co.uk.Had to change some Firefox options to get it to work with any site other than google.Noticed that ping pop.1and1.co.uk sometimes gave a bad address until I disabled IPv6.

View 6 Replies View Related

Server :: Sending Mail Through Thunderbird Smtp Auth Error

Jul 6, 2011

i had configured mail server in linux. i had configured sendmail in linux client . i have error while sending mail through thunderbird smtp auth error how can i resolv the issue .....

View 1 Replies View Related

Server :: Dovecot IMAP And Subfolders - Mac's Mail Application And Thunderbird - Both Come Up With Error

Mar 18, 2010

I'm running Dovecot version dovecot-1.0.7 on CentOS 5.4. I'm trying to create subfolders and I can't. I've tried Mac's mail application and Thunderbird; they both come up with an error, basically saying that the server doesn't support level one folders(subfolders). Squirrelmail can't create subfolders neither. I did some reading and thought that perhaps the problem lies in the /etc/dovecot.conf file; specifically with the "mail_location" directive. I currently don't have that directive active which means Dovecot uses defaults settings: saving users' mail in the %u/mail folder. Is there any way to configure Dovecot to use subfolders?

View 14 Replies View Related

OpenSUSE :: Firefox, "Get Mail" Extension, Thunderbird, And Default Applications / Clicking "Read Mail" Does Nothing?

Aug 1, 2010

- Firefox 3.6.8 (64 bit)
- Get Mail extension (v3.3.4),
- Thunderbird (3.1.1)

Problem:
Clicking "Read Mail" does nothing, whereas clicking "Compose Message" opens Thunderbird as expected. Thunderbird is properly configured under "System Settings > Default Apps > Email Client".

Whereas, switching the default email client back to Kmail results in the Get Mail "read mail" and "compose message" functions properly opening Kmail in both instances.

This problem occurred for me before (when using openSUSE v11.1 and earlier versions of the apps), but I don't recall how I eventually solved it, or whether it was resolved via an update of one of the above apps/extensions. Nonetheless, I'm now confronted by the very same problem again.

View 5 Replies View Related

Ubuntu Servers :: Migrate Postfix Mail Server To Exchange 2010 Mail Server

Nov 3, 2010

I have a problem relate to posttfix.I want to mirgare postfix mail server to exchange 2010 mail server but I can't do it,u can help me.You can show me have to do configure postfix and exchange how to?

View 1 Replies View Related

Server :: Mail Bouncing - SMTP Error From Remote Mail Server After Initial Connection: 550 Access Denied

Aug 30, 2010

This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:

xx@xx.com
SMTP error from remote mail server after initial connection: host [URL] [ip address]: 550 Access denied...

View 6 Replies View Related

Ubuntu Servers :: Make A Local Mail Server That Itself Is A Client To A WAN Mail Server?

Mar 10, 2011

How do I make a local mail server that itself is a client to a WAN mail server.I want the local mail server to query new mail every 30 minutes from the WAN server.

View 6 Replies View Related

Ubuntu Servers :: Secondary Mail Server And A Mail Gateway/relay?

Aug 3, 2011

Our primary mail server is Exchange 2003 Standard on Windows Server 2003 Standard - don't shout at me; I inherited it already set up this way.I have a couple of hardware identical redundant servers (HP ML350 boxes), all with very fast 2 or 4 disk arrays, multiple core CPUs and plenty of memory, and I am looking at two potential new additions to the infrastructure.

A secondary mail server is high on my list of priories. I've been well and truly bitten by Exchange in the past and given that this particular box has been running four years straight and that it's mail store is dangerously large, having a secondary mail server in place suddenly makes a lot of sense.

A new Exchange 2010 box is currently being set up, but the secondary mail server will remain in place even when the new Exchange server is brought online, so this won't be a wasted exercise.... I also want a gateway box in place to filter and relay mail to the primary server, or to the secondary server if the primary is unavailable. Currently our outer perimeter is:

ISP supplied CISCO router
Draytek VigorPro 5510 UTM

Untangle running in bridged mode (primarily used for SPAM filtering, URL blacklisting, and very little else) Exchange 2003 sits behind the Untangle box. This is how I want to end up:

CISCO >> Draytek >> Ubuntu gateway >> Exchange/secondary mail server

I know I could replace/remove the Draytek but I want it to remain for several reasons, including lots of VPN dial-in users already configured and that it offers us an additional layer of email antivirus scanning before things hit the Exchange box. No point switching all of our remote workers over to new tunnels unnecessarily...

I have done some research and have started testing a pilot secondary mail server using Ubuntu/postfix DNS is properly set up and MX records and reverse PTR records are all present and correct, and things are looking encouraging so far. Before I go out over deep waters and start to flounder, has anyone who has done something like this got any obvious howlers I should be looking to avoid ?

View 2 Replies View Related

Server :: Mail Server Configuration - Send Mail To External Domain(internet)

Feb 22, 2011

There is an requirement, intranet people they may not have internet access but they want to send mail to external domain(internet),but in that intranet network one machine can have internet access. Is there any solution for this requirement.

View 2 Replies View Related

CentOS 5 Server :: Postfix And Hosts File - The Mail Server Could Not Deliver Mail

Mar 20, 2011

I've setup my server by following a ton of goods, and it seems to work ok, but I need to start using my server for email in order to receive orders placed via my website. I've followed this guide - [URL] I followed the steps above, and tested the mail server via telnet, and all seemed to be ok. I tried sending an email via Squirrelmail, from cs@thinclientwarehouse.co.uk TO my working email simon@c1systems.co.uk, but the server returned with the following message:

<simon@c1systems.co.uk>: host mail.c1systems.co.uk[95.128.128.129] said: 550-Verification failed for <cs@localhost.thinclientwarehouse.co.uk> 550-The mail server could not deliver mail to cs@localhost.thinclientwarehouse.co.uk. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command)

View 14 Replies View Related

Fedora :: Unable To Connect From Clients Computers To Mail Server For Receiving Mail?

Oct 15, 2009

I have installed F11 on my server bythis article! I have problem with certificatewhen I connectin from clients computers to my mail server for reciving mail! I have warning like this

View 2 Replies View Related

General :: Configure Mutt Mail Client For Mail Server Other That Gmail?

Jan 9, 2011

I am trying to configure mutt to send email via command line . It works fine when I configure it for gmail as follows:Quote:

# SENDING MAIL
set copy=yes
set smtp_url = "smtp://mymail@smtp.gmail.com:587/"

[code]...

View 14 Replies View Related

Server :: Send Mail From Unix Mail Command To Yahoo-id With Attachment?

Feb 15, 2010

i want to send mail from unix mail command to my yahoo-id with attachment, but i want to receive it as attachment.

View 1 Replies View Related

Server :: Postfix Logs - Difference Between The Mail.log And Mail.info Files?

Jul 27, 2010

I have setup a postfix mailserver and it seems to be working ok, we are only using this to relay mail to our forum users. Its not being used to recieve any email only send them out to the internet.

What is the difference between the mail.log and mail.info files? Can I turn one or both off? I see alot of messages like...

Just wondering what this string of log entries means? Also I am getting duplicates in the syslog file as well.

View 2 Replies View Related

SUSE :: Mail Bouncing - Xx@xx.com SMTP Error From Remote Mail Server After Initial Connection

Aug 30, 2010

This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: xx@xx.com SMTP error from remote mail server after initial connection: host [URL] [ip address]: 50 Access denied...

View 4 Replies View Related

General :: Debian Mail Server As A User Send A Mail With Attachment Maximum Wight Is 5 Mb

Jun 8, 2011

How to configure a Debian mail server as a user send a mail with attachment maximum wight is 5 Mb.

View 3 Replies View Related

Server :: Configure Postfix To Relay Mail To Multiple Internal Mail Servers With Different Domains?

Aug 6, 2010

Two exchange servers internally. One is setup for example.com (192.168.1.10) and the other is setup for example2.com (192.168.1.20) Both are behind a single public IP.

I want to use postfix to sit in front of the two exchange servers. Postfix will accept mail for both domains and relay to the appropriate server. I have postfix installed with only defaults at this point.

View 2 Replies View Related

Server :: Configure Mail With Postfix & Cyrus-imap - Cannot Send Mail Through Command Line

Nov 19, 2010

I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.

[Code]....

View 9 Replies View Related

Server :: Build The Virtual Machines To Exclude The Actual Mail Files And Mail Logs From CentOS?

Oct 12, 2010

I have to administer a few mail servers, a mail log server, 4 nameservers and a web server -all running on Centos 5 server distributions. Now I have a task: to avoid accidental crashes on the production servers while installing updates, my boss asked me to do clones (these clones will all be VMware virtual machines) of the servers (EXCLUDING the actual e-mails and mail log contents) and then to run those clones on VMWare Server. This way, first I will install and test updates on the clones and - if they will be running without crashes - I will apply the updates on the real production servers themselves. I have already installed VMWare Server 2.0 I have a few questions:

- How do I build the virtual machines to exclude the actual mail files and mail logs? Can I use VMware Converter for this purpose, or do I have to use another program?
- How do I actually do this cloning? Is there a tutorial on how to do this?

View 3 Replies View Related

Networking :: Send Mail - Internet Mail Server Seems Not Working At All

Mar 30, 2011

i have an server which have my site on it, server have an public ip and site works fine..the thing that i done to enable mail server is :

1.select sendmail option as mail server(in joomla).
2.install and configure sendmail in server (which ubuntu installed on it )

**if i use my website locally mail server works fine i can send message and receive , but when i use web site from Internet mail server seems not working at all

View 1 Replies View Related

Server :: Gmail Does Not Work For Receiving Mail Through Function MAIL()

Sep 6, 2010

I do not know where the problem occurs, but when sending mail through FCI mail () on the Gmail e-mail fails to deliver. The logo is not a bug and should be on the list, center, walks etc mails totally normal, but gmail does not pass anything. Nothing in the spam ... I tried to create a new mail to Gmail and send the message, and nothing may be ...

You have no idea where it could be a potential bug? from webmail to send mail to gmail is realized, but through the mail () not ... I thought that the problem is in a blacklist from Google, but a week ago, we changed the IP server (migration) and the problem still persists ..

View 2 Replies View Related

Server :: Setup An MTA To Pass Mail Onto An External ISP/mail Provider?

Jul 1, 2009

I have a Fedora 10 machine that I want to setup to send email. However I don't want it to be a full blown SMTP setup.What I am looking to achieve is when something sends email from the local machine (e.g. from cron) to an address I want it to use an MTA on the local machine which will then connect to, and authenticate with, my e-mail providers SMTP server this will then take care of actually sending the e-mail.I don't want, or need, to setup a full blown SMTP service (i.e. only the local machine should be able to use it) so sendmail seems a bit over the top for my needs. Nor do I want to mess about with MX records (am I right in thinking this will mean I have to manage all mail for my domain?).

View 2 Replies View Related

Software :: Debian Mail Server Won't Send Or Receive Mail

Apr 22, 2010

i basically had this system installed for our mail system.The setup is as follows:

1. Operating system installed is Debian ver. 5.0.3

2. Roundcube is installed as a webmail(if its right for me to say that)

3. The server is hosted right here at our offices

4.The server uses relay system to send mail i.e. relays all our mails to our ISP

That all i can say about the configurations becuase thats as much as i understand it.The problem now is that we are not able to send or recieve emails from both internal and external.I tried to send mail to a collegue in the office who is on our local LAN,Roundcube says sent successfully but the person does not recieve the mail.i tried to send to my yahoo address but nothing.I dont know where these mails have been trapped.

View 5 Replies View Related

CentOS 5 Server :: Cent OS 5.4. - Send A Mail With Mail In Console

Apr 21, 2010

i'm trying to send a mail with "mail" on my cent os console , but without success. In Suse it's quite simple with "mail": mail -r sendersaddress@domain -s "subject" targetaddress@domain </tmp/filewithcontent

View 6 Replies View Related

Server :: Can't Get Postfix Mail Boxes From /var/mail To ~/Maildir?

May 31, 2010

I'm running a Debian LAMP server and I am adding postfix. The initial config is working and I can send and receive mail both locally and over the WAN. The problem is that I cannot get mail delivered to the user's home directory using Maildir/. I have set the:home_mailbox = Maildir/ parameter in main.cf but mail still goes to /var/mail after Postfix reload. The system is now using Maildir/ instead of mbox but in /var/mail. I really want to get mail into the user's home directory.

View 6 Replies View Related

Server :: E-mail Clients Know Whether Or Not An E-mail Is Part Of A Thread?

Jul 5, 2011

How do e-mail clients know whether or not an e-mail is part of a thread? (For example, Thunderbird can fold e-mails into threads.) Do they just guess based on the Subject line, or do they know for certain based on an e-mail field? I was planning to tackle some more advanced filter programming on my Postfix server.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved