OpenSUSE :: Suse11.4 X86_64 Update Failing?
Aug 10, 2011
When I run the YAST Online Update OR Software Management OR Zypper, the Updates (or install of new software) fails when the download of the Delta RPM reaches 98%. I have added ALL of the community repositories and have Imported the appropriate certificates. When watching the DeltaRPM or normal RPM download, it starts the download at approx. 4Mbs/sec until it reaches 98% of file downloaded. Then, the speed drops to 0 B/sec and the file download fails. This then prompts a Retry which again fails when it reaches approx 98% download. It does not matter if I am doing an Online Update, Doing a Software Management (to install new software) or using Zypper in a Terminal session, the result is the same.
I have even gone so far as to connect the machine DIRECTLY to the internet, bypassing all firewalls so as to ensure it is not a firewall
[Code]...
View 4 Replies
ADVERTISEMENT
Aug 10, 2011
When I run the YAST Online Update OR Software Management OR Zypper, the Updates (or install of new software) fails when the download of the Delta RPM reaches 98%. I have added ALL of the community repositories and have Imported the appropriate certificates. When watching the DeltaRPM or normal RPM download, it starts the download at approx. 4Mbs/sec until it reaches 98% of file downloaded. Then, the speed drops to 0 B/sec and the file download fails. This then prompts a Retry which again fails when it reaches approx 98% download.
It does not matter if I am doing an Online Update, Doing a Software Management (to install new software) or using Zypper in a Terminal session, the result is the same. I have even gone so far as to connect the machine DIRECTLY to the internet, bypassing all firewalls so as to ensure it is not a firewall issue.
[Code]...
View 2 Replies
View Related
Jan 5, 2011
My laptop is a Medion MD 96970 (bought at Aldi in September 2008) with
- graphic card nVidia GeForce 9300M G
- processor Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz
- 82801H (ICH8 Family) HD Audio Controller
- 3GB RAM and 300 GB memory
1) Originally, my laptop came with Windows Vista. Then I got a SUSE linux 11.0 CD, let it make a partition and installed Suse 11.0. Since Suse11.0 isn't updated any further I would like to change to Suse 11.3 (or whatever is newer). How should I proceed? (I can't find my old Windows Vista CDs and would like to KEEP THE PARTITION, thus formating all isn't an option)
2) In order to make a backup I bought a portable hard drive from iomega (USB 2.0). Then I noticed that it is formated in NTFS. SUSE 11.0 doesn't seem to like it --- what should I do? Can I reformat it somehow?
3) Suse 11.0 doesn't like my sound card. Thus I couldn't Skype or listen to music --- do you know if this problem is solved under Suse 11.3?
View 9 Replies
View Related
Oct 20, 2010
I just deleted the suse kernel-default by yast2 accidentally and rebooted the suse11 box,how will I install the kernel in suse11 rescue mode from the suse11 dvd ?
View 2 Replies
View Related
Nov 5, 2010
I have a couple VPNs I use for work, and after installing F14 x86_64 it is failing:
Code:
Nov 5 12:40:57 raykj NetworkManager[4106]: <info> VPN service 'vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 4203
Nov 5 12:40:57 raykj NetworkManager[4106]: <info> VPN service 'vpnc' appeared; activating connections
[Code]....
View 2 Replies
View Related
Apr 14, 2010
I am having trouble to update my pc using yast or yast2
Bad media attach point: Index of /debug/distribution/11.2/repo/oss
when i run installation_sources -s command i get
# | Alias | Name | Enabled | Refresh | Type
--+-----------------+-----------------------+---------+---------+-------
1 | openSUSE 11.2-0 | openSUSE 11.2-0 | Yes | No | yast2
2 | repo-debug | openSUSE-11.2-Debug | Yes | Yes | NONE
3 | repo-non-oss | openSUSE-11.2-Non-Oss | Yes | Yes | yast2
4 | repo-oss | openSUSE-11.2-Oss | Yes | Yes | yast2
5 | repo-source | openSUSE-11.2-Source | No | Yes | NONE
6 | repo-update | openSUSE-11.2-Update | Yes | Yes | rpm-md
View 2 Replies
View Related
Nov 7, 2010
i've installed opensuse 11.3 x86_64 and everything works great. after install updates and restart i cannot access internet from wireless connection. Knetworkmanager says it is connected, i have a dhcp ip, gateway, and cannot access internet.... i tried to configure from yast and cannot access internet...
View 3 Replies
View Related
May 2, 2011
I realize that Canonical is not responsible for the Catalyst driver, but I can't seem to operate outside of the Ubuntu Classic (no effects) mode for 64 bit Natty, and I was curius if anyone else had encountered or resolved this.
When I upgraded from 10.10 (I was using the fglrx package), xorg would immediately crash. I was able to reach the gdm screen only using recovery mode. I uninstalled the fglrx package, and now I can boot into Ubuntu Classic (no effects) mode only (no other desktop will work) using the open-source driver at no greater than 1280x1024.
When I try to re-install the catalyst driver using aptitude or Administration->Additional Drivers, the installation fails:
(jockey.log: WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx)
Similarly, package generation from the AMD page fails:
Installation complete.
*** glibc detected *** ./setup.data/bin/x86_64/setup: double free or corruption (fasttop): 0x000000000259f630 ***
======= Backtrace: =========
[Code].....
View 5 Replies
View Related
Mar 16, 2010
Yesterday I applied the su security patch to my openSuSE 11.2 x86_64 system.After applying the patch, any attempt at su failed, and after rebooting the system earlier this morning any login (root, user, otherwise) fails with a "Permission Denied".Is it possible that the su update somehow messed up my (standard) pam settings?
View 10 Replies
View Related
Aug 3, 2010
Attempting to compile an application that is not located in any of the repos yet for 11.3 64 bit. I have downloaded the appropriate src and untarred it. However, when I attempt to run the ./configure command here is the error I receive. checking build system type... Invalid configuration `x86_64-unknown-linux-': machine `x86_64-unknown-linux' not recognized configure: error: /bin/sh ./config.sub x86_64-unknown-linux- failed
I have made sure that I have all kernel-headers packages installed and am unsure as how to proceed. I tried using the command "./configure --build=x86_64" and then receive an error stating that the "SYSTEM IS NOT SUPPORTED" and continued errors stating that gcc is not installed, eve though it is.
View 5 Replies
View Related
Mar 31, 2010
today I upgraded my 11.2 system to KDE 4.4.2. Basically this works. However there are two questions I was not yet able to find a useful answer for:
- 4.4.2 offer strigi desktop search. The index process started and probably did its job but how can I start a search. I found a hint that dolphin can be used, but here I do not find any Menu entry that opens a search dialog (except for the standard file search window). What I found was settings->Toolbar and there I could add a search bar into dolphins toolbar. However this search bar only appears in this one window, if I close it and open a new dolphin window it will not appear again (probably a bug). Any other way to start a strigi based desktop search?
- Again in dolphin I sometimes see strange folder icons for the folders in my home directory. Basically this is the default folder icon and after waiting a while all the icons change in that inside the regular folder icon a gray rectangle is displayed a the lower left side. No idea what this is good for. I goes away if I reload the folders content and then again after a while those strange icon appears again. It does however not appear for folders in eg /tmp only for /home which is on my system a NFS mounted filesystem.
View 4 Replies
View Related
Dec 26, 2010
I add http://ftp5.gwdg.de /pub/opensuse/repositories/ always error :A valid domain name consist of
View 2 Replies
View Related
Aug 23, 2010
I am having a hard time getting repositories to install and even some applications. Do I use yast to install RPM's aned what about if the file is a zipped up tar file? If you are familiar with VMware, can we play cd's, rip them and burn and so on?
View 1 Replies
View Related
Apr 22, 2011
I have installed openSUSE-11.3 in my system.But the problem is when the load of the system is little bit higher the getting black and the performance of the system is totally decreasing and the at that time the system is also going to struck.
View 9 Replies
View Related
Dec 26, 2010
I set HTTP proxy: http://10.*.*.*:6666/ choose Use the same proxy for all protocols fill my user name and password An error occurred when testing:
* Port number too large: ****** (password number)
curl: (3) Port number too large: ****** (password number)
* About to connect() to proxy 10.*.*.* port 6666 (#0)
* Trying 10.*.*.*... % Total % Received % Xferd Average Speed Time Time Time Current
[code]....
View 2 Replies
View Related
Dec 10, 2009
I am having some trouble getting a VNC session to a new OpenSuse 11.2 32bit machine I have just installed.Fresh off the DVD, tried under KDE4 and Gnome with the same result (each time a fresh install).In YAST, I enabled remote administration, open the firewall ports, and then try and connect from remote client (in this case I have tried RealVNC from windows, and krdc from a Suse 10.x client and via HTTP) all result in the same blank black screen (http does get an X cursor echoed on the screen)
View 3 Replies
View Related
Jun 19, 2011
Running:
Suse11.4 (Celadon)
Kernel Linux 2.6.37.6-0.5-desktop
Gnome 2.32.1
I've just followed the instructions at SDB:Skype - openSUSE again, as before. The install didn't start automatically when the download finished so I used package installer. Skype appears to start normally, before promptly closing itself after about 3-5 seconds. When running it from terminal, I get the message:
Inconsistency detected by ld.so: dl-open.c: 582: _dl_open: Assertion `_dl_debug_initialize (0, args.nsid)->r_state == RT_CONSISTENT' failed! Code: rpm -q libasound2-32bit xorg-x11-libXv-32bit xorg-x11-libs-32bit libqt4-x11-32bit libpng12-0-32bit skype
[Code]...
View 9 Replies
View Related
Feb 16, 2011
I am running suse11.3 32 bit, and have installed squid3.
As far as I can tell it's not been compiled with ipv6 support.
Or have I missed some option in some file somewhere?
View 2 Replies
View Related
Feb 22, 2010
I'm a new linux user and I'm trying to install some files from a .tar.gz archive. I have successfully created a repository in a directory using createrepo, but I can't figure out how to add am installation source to YaST.How is it done in 11.2?
View 2 Replies
View Related
May 13, 2010
Recently, I downloaded openSUSE 11.2 DVD.I read here (Partitioning/Install Guide) that GRUB may not dual boot correctly with windows: It should be said that grub does not always get the settings to boot Windows quite correct and you may later have to adjust the /boot/grub/menu.lst file in your Linux installation
Is it true also for the openSuse version (11.2) that I downloaded? Please refer to Windows 7.
View 2 Replies
View Related
Jun 2, 2011
For some reason I cannot update software or repositories.Failed to fetch etc. Thought trying a different mirror may help, where do I locate this.
okay so i changed mirrors. then
sudo dpkg --configure -a
sudo apt-get clean
and got
W: Failed to fetch http://packages.medibuntu.org/dists/...86/Packages.gz Unable to connect to packages.medibuntu.org:http:
W: Some index files failed to download, they have been ignored, or old ones used instead.
Do I need to alter my sources list. This wasn't a problem until now
View 3 Replies
View Related
Sep 20, 2010
Recently I upgraded my kernel to 2.6.34.6-47.fc13.x86_64 and then also did an update to 2.6.34.6-47.fc13.x86_64. Both of these kernels I do not get a login dialogue box. I still have the one kernel that works and it is 2.6.33.8-149.fc13.x86_64. The system I am on has a Radeon graphics card, but I don't think the graphics card is the issue since I get the login screen's background, but not the login screen itself. <Later> After messing around with this for a while I came to the conclusion that livna-config-display was messing with the xorg.conf file. Removed it and things seem to be working fine now.
View 1 Replies
View Related
May 18, 2010
Last nigth I upgrade my system to squeeze and it whent well except for grub-pc and udev. If i try to upgrade now udev will not install do to problems with the kernel version and grub-pc can't seem to find the boot image.
[Code].....
View 3 Replies
View Related
Dec 1, 2009
I tried to update my f12 today. In the list it showed an update for kernel-2.6.31.6-145.fc12.x86_64 It all seemed to go OK but when I restated my computer it spit up an error and wouldn't boot"Could not load /lib/modules/2.6.31.6-145.f12.x86_64/modules.dep: No such file or directory"Luckily the old kernel still works.
I do have the disk encryption set, could this be related to that? Updated my laptop today with the xx.6-145.f12.PAE kernel and now it's borked to. Same problems.12/07/2009OK today's kernel update seemedto fix the problems and now all is well, execpt for my inkscape not working problem. But I put ubuntu 9.10 in a VBox and it works. So for now that's my work around.
View 14 Replies
View Related
Jul 9, 2011
Just installed and started to use the suse11.4 two weeks ago when my Win7 broke down. Now I got a new Win7 recovery disc from my laptop manufacturer, and want to install a Win7 accompanying with the suse11.4.
My question is how to clear up a free space in HD to install win7? Currently, I have 3 partitions that are sda1, sda2 and sda3 with space 2G(swap), 20G(root) and 270G(home) respectively. I want to free up half space from sda3 to install Win7, how to do it without delete the data on it? One weird thing is that my HD totally is 320G, but when I installed SUSE, only 300G was usable and the other 20G is missing until now. The fdisk -l command info. is showed below:
View 3 Replies
View Related
Apr 29, 2011
...../etc/init.d/before.local...System Console Stolen at line: 266 This line of red warning consistently appears immediately after something that ended with /etc/init.d/before.localThis is during the boot.Have anyone see it before ?It appears both in kernel versions:2.6.37.6-0.5-desktop2.6.37.1-1.2-desktop
View 3 Replies
View Related
Jul 29, 2011
Firefox auto update keeps failing so...I need help locating the original installation location.
I tried downloading the update and using archive manager to open rather than save, but still it wanted to save. Now I can't find the location it selected.
I want to locate the downloaded saved and delete the new files, to conserve space.
And I need to learn how to force an Automatic update.
I found a folder named firefox and another firefox 3.0 System will not let me delete / move to trash.
I want to update to latest version. Don't want to remove the original and lose all my bookmarks
View 9 Replies
View Related
May 10, 2011
While i am using yum update am getting an error: Error: Missing Dependency: libgpod.so.0()(64bit) is needed by package rhythmbox-0.11.6-4.el5.x86_64 (installed).
View 3 Replies
View Related
Aug 6, 2010
after random chashes of openSUSE 11.3 x86_64 on my Acer Aspire 5720z I found a lot of messsages on the log
Code:
mcelog: failed to prefill DIMM database from DMI data
dmidecode seem ok for me
Code:
sharwyn:/var/log # dmidecode
# dmidecode 2.10
SMBIOS 2.4 present.
[Code]...
View 1 Replies
View Related
Aug 10, 2011
on a newly installed opensuse 11.4 x86_64 I am unable to find the settings to switch keyboard layout from english to german to french or any other language .it used to be in the system settings Keyboard-->Keyboard layouts -->> activate german btw french etc...
View 2 Replies
View Related
