Fedora :: Win7 Install Changed Part' To Lvm2?
Jun 1, 2010
I've done a search thru the forums on a recent headache but couldn't find anything. now we all know that windows installations knackers the grub boot-up, and it becomes modus-operandi to repair the boot loader, with a live distro. however, in my current dual boot system (vista.sp2/fedora12), i've done a clean install of windows7 over the current windows ntfs partition. as standard, the boot menu would vanish. but when i put in the live-linux cd, gparted now shows the fedora partition (sda6) as LVM2. i'm somewhat of a neophyte with linux, but fedora12, suse11.2 and ubuntu don't seem to yet support this file system. since i don't have critical data on the fedora partition yet, i usually wouldn't mind reformating this part', but the wireless chipset on my laptop cost a fortune on cups of coffee and beer to install, and in addition i used the fedora12 FEL spin and want to keep the installation intact. is there anyway to make the LVM2 indentifier back to ext3 or 4 and repair grub form there (without loosing the current partition kernal etc.)?
View 2 Replies
ADVERTISEMENT
Nov 26, 2010
I have a working Fedora14 system. /boot is on sda1.
Here is my system:
Code:
I would like to install Grub2 to have /boot in LVM2 as well. Is there a guide for it or can someone help me with this task?
View 5 Replies
View Related
Oct 15, 2010
I downloaded some software yesterday from the ubuntu rep. This morning my screen has the bottom part of in black there are the KDE docky ,firefox ,terminal & rhythmbox icons ,so is the taskbar..but the wallpaper is cut up ,4cm off. I have noticed that the splash screens res has changed too. It's sharper (smaller). The browser as a consequence is also half lit & having noscript in the bottom without it being visible is a problem. Why has this happened & how can I fix it. The last working config, well that's somewhere else.
View 3 Replies
View Related
Jun 2, 2011
I just installed windows 7 and ubuntu stopped booting even though it was still there, so I thought I would just change the partition flag to boot. I found out later that I had to create a new mbr but after I changed the boot flag, windows 7 stopped booting and I tried changing it back, but it didnt work. So I was wondering if i didn't use the correct flags or is there another way to get windows 7 to boot again? I was using GParted to change the partition flags and that i am using windows 7 ultimate 64bit
View 1 Replies
View Related
Jan 7, 2011
my system is phenom 954i ram 1 gb ddr3 but im not able to install red hat
View 2 Replies
View Related
Jan 4, 2011
Running 'zypper install lvm2-clvm' results in a message: Resolving package dependencies... Problem: nothing provides libcpg.so.2()(64bit) needed by lvm2-clvm-2.02.45-16.2.x86_64 Solution 1: do not install lvm2-clvm-2.02.45-16.2.x86_64 Solution 2: break lvm2-clvm by ignoring some of its dependencies So it cannot find the cpg library, which appears to be a part of openais (if I believe google). I have configured the following repositories:
[Code]....
What could be the problem here? Am I just missing a repository or is cluster LVM not supported on opensuse 11.3?
View 9 Replies
View Related
Feb 7, 2010
I am a major noob to FC12. I need to install Windows 7 Pro and FC12 dual boot. I first used the windows CD to create 1 250 Gig partition on my 500 Gig HD. Of course windows created the 100 MB system partition. I left the rest unpartitioned. Windows installed okay. I then booted to the KDE FC12 Live CD and installed FC12. I specified to use the Free Space remaining on the HD. The installation finished but now only boots into FC12 and does not prompt me for the OS I want to boot.
View 3 Replies
View Related
Jul 5, 2010
I just installed win 7 and now can't install fedira 13 on the partition that i made for it on the same drive. The problem is that after installation of win 7 i lost the ability to boot form cd. In bios i still have cd set up to boot first and drive second, but win 7 did something that overrides bios set up. I even tried Esc for boot menu, then i select to boot form cd, but it still boots in windows.
View 1 Replies
View Related
Aug 30, 2009
Just d/led Fedora 11, installed in Sun Virtual box 3.04. New to Fedora and can't figure out how to install guest additions to get my resolution up to par. I have the iso mounted and can get to it via "file management" no problem.
View 8 Replies
View Related
Jan 4, 2010
I have two ext3 partitions within an encrypted lvm2 volume. when i start up my system it says that there are 0.3% non contiguous blocks.
This is my steup:
When i want to repair with repair system from dvd it tells me that the repair and check operation for encrypted LVM devices is not supported. so how can i fix my filesystem?
View 4 Replies
View Related
Dec 8, 2010
I just used dd to clone a linux partition to a new hard drive, it had 800mb left on the old hard drive, after dd, new hard drive lists 1.29/1.3 terabytes full. Is this what happens by default in dd? How can I fix this?
View 1 Replies
View Related
May 24, 2010
I'm trying to figure out how to access the local part and the domain part of an email address in postfix's main.cf. For example, myname@mydomain.net has myname as the local part and mydomain.net as the domain part.I get the whole email address with %s. I want to speed up the lookups by writing better database queries.I've had no luck finding this in the otherwise well documented postfix.
View 2 Replies
View Related
Jul 13, 2009
we have access to one domain name , 1 internet ip address and may servers hosting different part of site. I want them all to be accessed via same web site . some of the server in our network are embedded devices.they have their specific utility being hosted on that machine. So the severs are bound to be distributed . I just wanted to know how can I access them via single ip, domain name.
View 6 Replies
View Related
Jan 14, 2010
In bootseqence of linux, the first step is check the CMOSRAM(size 64bytes) setup for custmor setting. So i am just confused wether CMOSRAM is a part of motherboard or is a part of RAM itself.
View 4 Replies
View Related
Apr 18, 2010
I am planning to install 10.4 when it arrives. And am not going to upgrade because i upgraded from 9.04 to 9.10 so now i need to refresh the system.But I have all my partitions except root using lvm2 logical volumes. My question is : What is the safest procedure to install 10.4 on an existing lvm2 without losing my files/partitions
View 2 Replies
View Related
Nov 23, 2009
This is my situation: on a LVM2 partition, i have shrink a logical volume to free new space for a new partition.
My system-config-lvm screen: http://forums.fedoraforum.org/attach...1&d=1258988216 code...
View 9 Replies
View Related
Nov 5, 2010
I have installed my Fedora on a LVM2 group and alocated a total of 10 GB. Which of course is abusrdly and ridiculously low space. As a matter of fact I did even more stupid thing - I allocated 4 (four) gigabytes for /swap !
I am complete novice in Linux and fedora, but I want to extend my /root lvm drive with at least 20 gb.
I burned parted magic on a CD and tried to manage the LVM2 grop, but it said LVM2 was not supported in parted magic. And so I tried the Fedora Partition Manager and got lost in what and how. I tried reducing the /swap space and increasing the / space, but failed - I could only select zero Mbytes for swap space, and had the only option of decreasing space for /, which is really not what I want to do.
What I want to do is extend the space for the whole LVM2 Logical Group , which is now 10 GB total for / and /swap. Or at least I'd like to reduce my /swap size and increase my / size.
View 2 Replies
View Related
Jan 22, 2009
i want to know that if i install linux on to my pc with SWAP/ boot as partition and after that i want to convert them to LVM2 type configuration .how can i do that.i want to create a system having logical volumes from that system without reinstalling these partitions should convert into two LV's
LV 0 for root
LV 1 for swap
both in one volume group.
View 1 Replies
View Related
Aug 10, 2009
I have no idea what I'm doing so here goes: I installed Fedora and clicked the "encrypted" box during the process. What I want to do now is "browse" the volume using "File Browser" but I only get messages like, "Unable to mount location, org.freedesktop.DeviceKit.Disks.Error.Failed: Not a mountable file system". Why cannot I not see the files? I have the password. I would like to be able to move, delete, rename, etc files but that seems impossible because I cannot access the drive.
View 1 Replies
View Related
Mar 17, 2011
I just installed linux fedora 14 on my hp probook 4320s with installation CD with this name: Fedora-14-x86_64-Live-Desktop. Then I installed it on the hard disk. During installation I chose to encrypt hard disk. When I try to access my hard disk it says "unable to mount 250GB LVM2 Physical Volume, Not a mountable file system". What can I do to get access to my hard disk?
View 4 Replies
View Related
Jun 18, 2011
I've done a search thru the forums on a recent headache but couldn't find anything. now we all know that windows installations knackers the grub boot-up, and it becomes modus-operandi to repair the boot loader, with a live distro. however, in my current dual boot system (vista.sp2/fedora12), i've done a clean install of windows7 over the current windows ntfs partition. as standard, the boot menu would vanish. but when i put in the live-linux cd, gparted now shows the fedora partition (sda6) as LVM2. i'm somewhat of a neophyte with linux, but fedora12, suse11.2 and ubuntu don't seem to yet support this file system.
since i don't have critical data on the fedora partition yet, i usually wouldn't mind reformating this part', but the wireless chipset on my laptop cost a fortune on cups of coffee and beer to install, and in addition i used the fedora12 FEL spin and want to keep the installation intact. is there anyway to make the LVM2 indentifier back to ext3 or 4 and repair grub form there (without loosing the current partition kernal etc.)?
View 5 Replies
View Related
Oct 15, 2009
I need to install a lvm2 group with encryption and have the /boot file stored within. Is this possible in Fedora's graphical installer? I know it can be achieved in Arch(I know I'll need grub2, I assume that's coming in Fedora 12) I can always install it separately.
View 6 Replies
View Related
Oct 10, 2010
I want to install this program:[URL]..but when i go into the download section [URL].. it only has tar.gz files and not a deb file. How would i install it?
I am very new to ubuntu/linux so dont really know what these files are. i know they are some sort of compression file, thats about it.
View 3 Replies
View Related
Mar 15, 2010
I ran the ubuntu 11.04 live CD on my laptop that had an earlier version of ubuntu (9 maybe??). I really liked what I saw so I used the Install ubuntu 11.04 wizard and chose the option to override the earlier version. During the 'Importing document and settings' step a pop-up entitled Failed to unmount partitions. the body stated: migration-assistant needs to mount a partition, but cannot do so because the following mount partition could not be unmounted:
/dev/sda1
The only app showing on the taskbar is the Install. this is running from the live CD.
View 9 Replies
View Related
Jan 20, 2010
the normal auto updater ran and installed a new kernel for security vulnerability and it was a .pae version. So after restart I now have 4 options on the boot screen, which includes the normal "SUSE" and a 'SUSE pae" version. defaulted to the new pae version and booted up. I got the video definition not found and had to enter a value manually. The system comes up but not into x system. It gives me a login prompt and startx yields a "terminal not found." Ran SaX2 and startx now works. Unfortunately my KDE desktop is messed up now. There are none of the normal "taskbar" at boot up started processes there. So what should I have done? how do I get my system back to normal and roll out the new kernel and all these changes?
View 6 Replies
View Related
Jul 4, 2010
I have linux based photo editing software that I want to install so that it can be accessed through the Applications menu. Which system folder do I install it in? Or what terminal commands do I use to install so it is part of the system?
View 5 Replies
View Related
Mar 18, 2011
I tried to install ubuntu 10.10 onto an HP laptop and could not get anything to boot apart from windows vista. When I entered the boot options and selected CD to try and load the ubuntu CD it just booted off the HDD repeatedly. I removed (foolishly perhaps) the HDD and formatted it on my other machine, then created a start-up disk for ubuntu on it. I re-installed the hard drive and loaded ubuntu with no problems, but I can't install it. What do I need to do to the HDD (partitions, flags, etc) to make it so I can boot the iso from one part of the drive and install on the other?
View 7 Replies
View Related
Dec 31, 2010
Just installed Ubuntu 10.10 onto my new netbook from a USB stick. The laptop came with Win7 Starter, which I kept on a small partition. Installation was apparently successful, but when I start up the computer, it will go straight to Win7 and GRUB doesn't appear.
View 9 Replies
View Related
May 2, 2011
I had vista installed, then I installed Win7 on a dif. partition. Then I installed Ubuntu 11.4 over the vista partition (formatted first), and now I can't get into Win7. I'm really at a loss. I've tried the Win7 disk, and it doesn't detect the Win7 installation. I've also tried sudo update-grub, and it doesn't seem to detect the win7 install either. I've tried making the Win7 partition bootable using gpart as well. I'd like to dual boot Win7 and Ubuntu, however I need to do that.
View 9 Replies
View Related
Apr 23, 2011
i installed ubuntu after windows 7 but now i cant boot windows 7 i tried the start up repair and I've read through some questions answered on here and int figure out the problem i don't want to uninstall ubuntu unless it's my only option
View 9 Replies
View Related
