how do i install the latest deluge release from the repository? Do Deluge have their own repository of the latest release? openSUSE repository does not have the latest release. I am in search of a bitorrent client. i have uninstalled Ktorrent, i dont want that. in windows i was used to Utorrent.
View 3 RepliesI am new bie to linux and i am using FC 9. My intention is to install latest packages of FC11 release to FC9 despite of upgrading entire OS. is their any way to do this .... I have tried doing installing ssh package of FC11 release into FC9 OS but encountered with library errors.
View 7 Replies View RelatedI downloaded the latest release, burned a disk and successfully booted. When it comes time to choose a partition I don't have the option of replacing the old release. I can install in parallel leaving both but can't use the whole disk. Interestingly enough I CAN replace the windows installation. Of course I already have Grub installed but I don't see how this would affect installing. I read the article here [URL] and it seems I may have missed a step. However it's implied I will lose the current Grub installation. Is that the case?
View 5 Replies View RelatedIts here [URL]...
Obviously, due to dependencies,
version 11.4-82.2 of
kdebase4-runtime-branding-openSUSE
kdebase4-workspace-branding-openSUSE
kdelibs4-branding-openSUSE
kdm-branding-openSUSE
will not install.
64bit version works great for me. Only hic-cup noticed is mouse cursor theme seems inconsistent after reboot unless Oxygen White or Black selected.
As most of us are aware we have moved to a stable KDE repo url for all future updates. But how do I know what Repos are current? Is there a bulletin board I can check mine against?
View 2 Replies View RelatedI have libmtp installed but it's version 1.0.3. I don't see anywhere to update to the latest 1.1. Anyone know where this is?
View 4 Replies View RelatedI have a GTX 980 and the output of
Code: Select alluname -a is Linux MulletDeathPC 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19) x86_64 GNU/Linux
Is there any way to update firefox to the latest stable version, like 3.6.x through the repos on OpenSUSE 11.2?
And will it cause any problems if it can be done?
how to check what my latest installed drivers are and how to install the latest? If I search for Nvidia in YaST then noting comes up. I beleive the latest drivers from Nvidia are 195.xxx
View 7 Replies View RelatedI'm currently running F11 x86 and want to update to F13 x64, so a new drive and fresh install and copy all the config & data from old drive. and Prey, a lot....I'll be installing F13 x64 later this weekend, But F14 will be out in a few months then F15 and so on.I've tried the upgrade option (x86 to x86 in the past) on the install dvd but it doesn't work and I wind up with a broken install and have to do a fresh install after saving most of the import data and config files, but I usually missing something and get hosed. Part of the problem could be using Nvidia drivers for video and several applications installed from several different repos.I've never been able to safely uninstall the Nvidia driver and still have a working system, let alone upgrade to a newer version and still get a visible desktop.
I was thinking that couldn't I just edit a yum file and point it to a new repository and have it upgrade the machine with out all the fuss?I followed a procedure once or twice on how to do a inplace upgrade, but that didn't work either. I'd like to keep the machine running the latest bits, but with all the pain and suffering I need a simpler method to do it. Is there a procedure or process I can run or follow to keep Fedora in sync with the latest release with out having to continuously swap disks, reinstall and copy critical data files?
I have a dual-boot system (Windows 7 and Ubuntu 10.04) both 64-bit running on an HP pavilion laptop. I installed this dual-boot system only a few months ago and have continually added some new packages and updates with very few problems. However, now something has happened that really baffles me --- An error in the bootup process that I have never seen before and one that I have been unable to solve.
The problem I had been doing some programming (in Python) and after having the laptop on for several hours, I did a graceful shut down. Then, the next morning I turned on my laptop and the following is what happened:
[Code]...
I have tried the recommendation in B. to use 'chkdsk /r' in Windows. This took about 3 hours and had no effect on the error message. I also had made backups using "Back in time" which I tried (at least some of the directories) but none of these recovered directories had any noticeable effect on the error. This seems to be some basic device mounting problem that for some reason occurs only with the latest release and was triggered by some unknown event
I'd like to know if the latest release of the ATI Catalyst driver is compatible with Fedora 13.
View 14 Replies View RelatedWith Karmic there's some support for the ati radeon 7000 ve, but it's the default driver with limited or no 3d function. Previous distros supported radeon 7000 ve. Is it likely to expect that Lucid will not support this video card.
View 2 Replies View RelatedPress
Code:
Alt+F2
and type
Code:
update-manager -d
This should show the option to upgrade to the latest alpha release of natty. Through the terminal this can be done using the same command but you need use.
Code:
sudo
or
Code:
sudo -s
to do this.
On my previous release *cough* if inenslave was needed, bonding instructions didn't work through aggregation did.
cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto bond0
iface bond0 inet static
address 192.168.1.149
netmask 255.255.255.0
gateway 192.168.1.1
dns-nameservers 127.0.0.1
broadcast 192.128.1.255
post-up ifenslave bond0 eth0 eth1
pre-down ifenslave -d bond0 eth0 eth1
#auto wlan0
#iface wlan0 inet dhcp
#netmask 255.255.255.0
#wpa-conf /etc/wpa_supplicant.conf
For some reason the unmentioned former disto, I could not get wireless networking under this configuration and a simple wlan0 interface, in case either cable were to sever it would retain a wireless. The bonding was done for speed, and I believe I can't get faster than mode=4.
About a couple of days ago I'm sure I saw that Open Office was offering a DVD file download of their latest version. It was including versions for Win. Mac and Linux all on the one DVD. Now, after buying a DVD burner for my 'puter, I have been unable to find that information again.
View 4 Replies View RelatedI was seeding a folder with deluge and when I removed the file from deluge I chose remove data by mistake, so can I recover my folder?
View 4 Replies View RelatedAs this link advises [URL]my yum will not work now because of a change in the versioning scheme.How do I manually update my metadata so that I can start getting updates again, this is on CentOS 5.3.
View 3 Replies View RelatedIf I install the factory release now, can I easily convert my system to a normal 11.3 point release later, after 11.3 is out? If so, how would I do it? (11.2 has an issue that affects me. It's fixed in 11.3 already, so I have to use 11.3 if I'm going to use openSUSE.)
View 4 Replies View RelatedI keep getting this error whenever I try to update or reload. Does anyone know how to get rid of this or fix it?
GPG error: http://repository.cairo-dock.org karmic Release: The following signatures were invalid: NODATA 1 NODATA 2Failed to fetch http://repository.cairo-dock.org/ubu...6/Packages.bz2 Sub-process /bin/bzip2 returned an error code (2)
Is there a repository from which I can get the latest GCC build?
View 1 Replies View RelatedI see in Ubuntu 10.04 there is a PPA repository for latest gnome-shell, and it contains a newest version, the included in fedora 13 is older.
Is there a repository out there with the latest gnome-shell?
leaving the discussion is this logical or not. If I download the whole www folder to my hdd for example: from [URL] to /mnt/repos/oss/ and replace in package manager source [URL] with local one file://mnt/repos/oss will this work as it works from http server? What i want to do is to backup chosen repos before my linux release will be not supported anymore.
View 9 Replies View RelatedAs I have 15 repo's enabled in Yast it a bit tedious changing them in the package manager, is there an easier way to bulk change them? Something like doing a kfilereplace on the /etc/zypp/repos.d/ folder and changing all occurances of 11.3 to 11.4 (in all *repo, which are all the files in the folder). Will this work?
View 9 Replies View RelatedHow do i roll back firefox5beta to firefox4 and keep updating to the latest stable releases w/out upgrading to beta? The only extension that isn't working is FEBE which is incompatible w/ firefox5beta (profile, extension and preference backup). Have to use FEBE beta7 under Firefox4 so I don't think a compatible release for Firefox5beta is going to come out any time soon.
View 9 Replies View Relatedrelease notes Flash Player 10.2 Release Notes
View 9 Replies View RelatedI get the following error when YAST tries to install the latest updates----Subprocess failed. Error: RPM failed: error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found error: error(-30987) getting "" records from Requireversion index----could it be from removing KWALLET? Now I cannot re-install it due to this error.
View 9 Replies View RelatedA month ago, my HP Mini 1035NR, with a Windows XP system died. Since then, it won't boot into Windows. I tried installing Ubuntu via a bootable USB with no luck. I have finally been able to create a working bootable USB running the Gnome version of Open Suse 11.3.
Aside from not picking up my ethernet connection to the Internet, my bigger issue is I can't install Open Suse from the USB. I get a message when I try to install that there may not be enough memory and it hangs at the section where you choose your time zone. I would like to install the latest version of Open Suse with KDE. Is there anything else I can do?
Im not able to install the package mesa-32bit from this repository: Index of /repositories/X11:/XOrg/openSUSE_11.3. It tells me to make a huge change on architecture on many packages, plus downgrading mesa to 7.8.2 from 7.9 !
View 9 Replies View RelatedI would like to test 12.1 M5 on my real hardware, so I have special for this purpose two additional partitions (sda2 (to install milestone) and sda3 (to store installation ISO files)). I am running my stable 11.4 with Grub on sda1.
I do not like to burn DVDs just for short test of one milestone, so I was used to download DVD ISO, to unpack it to sda3 partition with all its files, then I changed Grub to boot install Linux from sda3. Installation complains there is no DVD or CD, then I chose to force installation from hard disk and select sda3 partition and select root directory "/". As I was used to from 11.4 this will start installation as it would be started from DVD.
But I think the problem has appeared since 12.1, where I get message: No repository found. (on sda3 / ), so the installation does not start.
I know this is not official way to install openSuse, but it worked before, and it was fast and easy for me, to install from hard disk.