leaving the discussion is this logical or not. If I download the whole www folder to my hdd for example: from [URL] to /mnt/repos/oss/ and replace in package manager source [URL] with local one file://mnt/repos/oss will this work as it works from http server? What i want to do is to backup chosen repos before my linux release will be not supported anymore.
View 9 RepliesI am trying to create a local debian repo for 3rd party apps and my own deb's. I have done the following: dpkg-scanpackages debian | gzip -9c> debian/Packages.gz Which did create a file called Packages.gz in the directory However, when I do apt-get update on a client machine I get the following error: W: Failed to fetch [URL] Could not connect to 10.1.1.10:8080 (10.1.1.10). - connect (111: Connection refused) W: Failed to fetch [URL] Unable to connect to 10.1.1.10:8080: W: Some index files failed to download, they have been ignored, or old ones used instead.
View 1 Replies View RelatedLooks like this has gone walkabout. It used to be in the Education repo and still is but is missing several updates. This repo has also gone missing from wiki pages and from list of community repos in YAST. Seems a bit suspicious as though something has been changed again.Is GRAMPS now in a different repo or is it no longer supported in openSUSE? Is Education repo defunct?
View 4 Replies View RelatedI have just upgraded to 11.3 and work in icewm (I have kde apps installed but no other desktops). When I boot up the computer it gives me this console error message:
Code:
kernel: [time] sisfb: Mode 'none' not supported anymore. Using default.
kernel: [time] sisfb: Fatal error: Unable to reserve 16MB framebuffer memory
kernel: [time] sisfb: Is there another framebuffer driver active?
Apart from that I'm not exactly sure what the problem is. The computer isn't displaying immediate symptoms to me. I checked the hardware sticky and when I have a few hours I can work through
HTML Code:
http://en.opensuse.org/SDB:Configuring_graphics_cards but I don't have that kind of time at the moment, so I wanted to check that that was the route I should be going down before I did. I googled this stuff but everything seems to start from a knowledge base above mine and leaves me clueless.
I have a local repository, and declare also a remote one, I want to tell to apt-get to install a package from a local repo, if it exists. it seems that it begins from the remote. here is my sources:
deb file:/home/CD1 squeeze main
deb file:/home/extra6 /
deb http://ftp.fr.debian.org/debian squeeze main non-free contrib
in home I do not have internet connection, but in work I have internet connection, in home I install Fedora 14 for my 6 years old daughter and she use it for play games like supertux and openarena and .So I want install opensuse for my daughter and I want test it. for fedora , I download all packages with rsync in work and move them to home by USN flash and then I make localrepo in home and install all packages , I need , I want do this for OpenSUSE , all of us know DVD , does not has all packages , I need , so I have to download all packages and make localrepo in home and install all packages , I need , Can I do this for OpenSuse or not ,I want download all packages need by OpenSuse by rsysc and make loacl repo, How I can do this for Opensuse ?
View 9 Replies View RelatedI dont have a internet connection and I want to install VLC. I want to create a local repo for a vlc by downloading all the required packages. I tried to do by downloading all the packages from from VLC repo and create a local repo but failed. Its say this dependency failed and that dependency failed. i tried to manually install each and every dependency but still the problem exists.
View 2 Replies View RelatedI have successfully installed fedora 10 and have rpmfusion in my /home/ directory. i don't know how to edit yum.conf to make yum install from this local repo. i tried once. But when i tried to install vlc i got an error saying some lib****** files are missing and missing dependencies.
View 2 Replies View RelatedI would like to upgrade my linux distro, since I'm using Karmic Koala and it is no longer supported anymore. However, upgrading via the updater always breaks my system, so I want to do a clean install. However, I have a LOT of programs installed in this machine, including a good number of games. Otherwise I think most of my data is neatly confined to my home folder, which I can easily transfer via external hard drive.
How do I get all my programs over, however? Like my PDF printer, for example, or all my games, or Inkscape, or Skype, or any number of things that I have installed. Especially WICD. I can never get my wireless internet to work without WICD. I will make a list of my programs beforehand, just in case something goes wrong, but is there any kind of less painful and time-consuming way to do this than going back and installing every program all over again from scratch?
If I install the factory release now, can I easily convert my system to a normal 11.3 point release later, after 11.3 is out? If so, how would I do it? (11.2 has an issue that affects me. It's fixed in 11.3 already, so I have to use 11.3 if I'm going to use openSUSE.)
View 4 Replies View Relatedi'm attempting to know and understand fedora more and i will spend probably the next month pouring through all the forums and documents to answer more of my own questions. but there's quite a bit here, so i'd thought i'd ask some noob questions to get me started a little.
ive installed fedora 14 64bit and chosen only kde as the desktop. i selected an extra 2 repos besides the default, fedora 14 -x86_64 and fedora 14-x86_64 -updates. i believe this kernel is installed: 2.6.35.11-83
1. i can only see the 2 extra repo's as being "checked" in kpackagekit, shouldn't i see the default repo also ?
2. i dont have an applet in the system tray indicating the system is up to date, does fedora have this by default ? also after a clean install i ran yum check-update and yum update but the message sayes: "no packages marked for update". i'm not sure if the system is auto-updated during install or not, but with other distros iv tried there is always atleast a few updates needing to be done after install.
3. is kpackagekit the fedora gui package manager ? i dont see any others.
4. i want to upgrade to nvidia drivers, but i think i am missing a non-free repo or something. when i enter: yum install kmod-nvidia xorg-x11-drv-nvidia-libs.i686 xorg-x11-drv-nvidia-libs.x86_64 i get messages stating "no package" i get the same message with yum install nvidia-settings.i also tried this: LANG=C yum --enablerepo=rpmfusion-nonfree info akmod-nvidia but it sayes repo not found.
I'm trying to build a local YUM repository for RHEL 6 and am running into an issue. I can get the repo to build, but I cannot get the gruoplist. I can't find a comps.xml file to run the createrepo -g command against, like there is in RHEL 5. Here's what I have so far:
mkdir /yumrepo
copied RHEL 6 DVD contents to /yumrepo/rhel6
createrepo /yumrepo/rhel6/Packages
(repo builds its lis of 3500+ packages)
yum list shows the lsit of all files within the repo correctly.
I run gpk-application, and I receive the error "The group list was invalid." I need to create the group list. But I can't figure out how? Can someone please explain what I'm missing here? Never had this much trouble with 5, but I know a lot has changed with 6.
I have created a local repository to install linux with. (class assignment) Created the following file structure off of /html directory;
/yum/base/13/i386
/yum/updates/13/i386
copied the contents of the packages from my fedora dvd;
mount /dev/cdrom /mnt
cd /mnt/Packages
cp -v * /var/www/html/yum/base/13/i386
cd /
umount /mnt
using rsync against fedora mirror updated the base to have compete set of .rpm packages from the Everything directory. Ran createrepo /var/www/html/yum/base/13/i386 Verified repodata folder was created and the contents are correct, shown below
[Code]....
Boot the PC and start the install using a kickstart file (if you need to see it let me know), all runs fine until it gets to the point of resolving dependency then it errors out - unable to resolve dependency against the repository. May not be the exact phrasing but generally speaking to that effect.
Release upgrade ends up with error:
"Error during update. A problem occurred during the update. This is usually some sort of network problem, please check your network connection and retry. The server may be overloaded. Restoring original system state".
When doing do-release-upgrade -d to upgrade from karmik to lucid. I using local mirror ftp://ubuntu.snacho.ru (also have http that works but not browseable). When I change lines in /etc/apt/sources.list from local mirror to official [URL] all works fine. I don't want to download 1Gb from internet (because of traffic cost). What is wrong with local mirror ? I can communicate with its owner, but what he needs to change on the mirror ?
Will KDE4.4 eventually move into the 11.2 updates or do I have to add the KDE Factory repo to get this update?
View 3 Replies View Relatedhow do i install the latest deluge release from the repository? Do Deluge have their own repository of the latest release? openSUSE repository does not have the latest release. I am in search of a bitorrent client. i have uninstalled Ktorrent, i dont want that. in windows i was used to Utorrent.
View 3 Replies View RelatedI'm trying to grab "repo" using curl and put it into /usr/local/bin/ but I can't seem to figure out why I'm getting a permission error:
Code:
$ sudo curl https://android.git.kernel.org/repo > /usr/local/bin/repo
bash: /usr/local/bin/repo: Permission denied
[code]....
I've created a local repository, my web server (apache) is up and running and my repo is inside it, so I want to install debian using it, in the stage of enter manually the info of the debian mirror I put:
1. debian archive mirror hostname:
192.168.10.1
2. debian archive mirror directory:
/repo
But after this, the installation tell me that it doesn't find the repo, I tried several ways, like: http://192.168.10.1; /repo/; /repo/ binary/ but nothing. What is the correct syntax to use my local repo?
I have a local git repository that pushes to a remote repository. That remote repository moved to a new server. How do I make "git push" and "git pull" push/pull to/from the new repo?
View 3 Replies View Relatedi just installed centos 5.4 and trying to make my local repo have groups listing of packages like the mirrors do
so i can make an spin off of the OS to my needs for web servers only / so on but
i cant get my head around the groups making part of the creatrepo
does anyone have any tips or hints or know how to make group listing of the packages
i copyed the DVD to hard drive and the repo .XML files they came with it and tryed that way but no luck yet
im running out of things to try
YaST-->Software-->Online Update Getting error: There was an error in the repository initialization. 'repo-non-oss': Failed to cache repo (139). History: - repo2solv.sh "/var/cache/zypp/raw/repo-non-oss" > "/var/cache/zypp/solv/repo-non-oss/solv"
Output of zypper lr:
# | Alias | Name | Enabled | Refresh
--+-----------------------+-----------------------+---------+--------
1 | openSUSE-11.0-Updates | openSUSE-11.0-Updates | Yes | Yes
2 | openSUSE-DVD 11.0 | openSUSE-DVD 11.0 | Yes | No
[code]....
If I disable the repo-non-oss repository the update works fine. The URL I have for the repo-non-oss repository is:
Index of /distribution/11.0/repo/non-oss
This has been going on for over a week. Do I need to use a different URL for the non-oss repository? I live in New York, United States.
I have 2 machines running 11.1, but using 2 diff KDE repo sets . . .
On the first, I am using /KDE:/43:/openSUSE_11.1 as listed under the KDE 4.3.x section of the KDE repo's page. The installed KDE version is 4.3.3-3 but yesterday this repo was updated to 4.3.4-1. The corresponding repo for 11.2 now also has 4.3.4-1.
On the second, I am using /KDE:/KDE4:/Factory:/Desktop/openSUSE_11.1. Installed is 4.3.3-128, the most current. This is the same version as in the corresponding 11.2 repo.
IIRC (and I very well may not) for those of us who wanted to go to 4.2 (and later, 4.3) it was first advised to use the /KDE:/KDE4:/Factory set, but later it was advised to switch to the /KDE:/43:/ set.
In any event, since 4.3.3 is officially released by KDE and considered stable while 4.3.4 is not, it would appear the upgrade path should use /KDE:/KDE4:/Factory/11.2 (which is counter-intuitive to me, given the "factory" nomenclature; on the other hand, the "43:" section is not accurately described, so perhaps that's the problem).
As I have 15 repo's enabled in Yast it a bit tedious changing them in the package manager, is there an easier way to bulk change them? Something like doing a kfilereplace on the /etc/zypp/repos.d/ folder and changing all occurances of 11.3 to 11.4 (in all *repo, which are all the files in the folder). Will this work?
View 9 Replies View RelatedI downloaded OpenSUSE 11.2 x86. Recordered,ran. I selected language (polish) and chose "Install" (originally "instaluj ). Installer booted, but I can't install because "linuxrc" was ran. Linuxrc can't find install disk, repo. I'll install with local DVD-RAM drive.
View 5 Replies View Relatedsince about a week I got a serious Problem on my Multimedia Homeserver. It firstly happened after doing normal updates with 'zypper dup'. Starting the Machine xdm starts up normally, but after logging in KDE (4.6.0, OpenSUSE 11.4 64Bit) shows its progress bar and finally ends up hanging at about 80% completion. Repos are the original distro repos (except nvidia, packman and VLC Repos) for stability reasons - this means no KDE-factory or Tumbleweed repo is activated here. Icewm starts fine so I can use Xine but I'd like to get KDE back running again for using amarok and others.Here is what I tried so far:
tried another user - same result
tried root-user - same result
renamed ~/.kde4 - same result
[code]....
I'm having trouble installing Fedora 11 using the URL method. When I put in a F11 netinstall CD, or even Disc 1, I press tab on the first option and add "askmethod" to the end of the text. Each time I point the installer to my local FTP and press enter after typing in the FTP url, the installer just hangs there. I've even tried deleting ALL the files from the F11 folder on my FTP server and downloaded ALL the files at:
ftp://ftp.linux.ncsu.edu/pub/fedora/...edora/i386/os/
Still...the same thing.
When I pointed the installer to:
ftp://ftp.linux.ncsu.edu/pub/fedora/...edora/i386/os/
Everything worked fine, albeit slow as it was DL from the NCSU FTP server.
Am I doing something wrong with my FTP server? It is anon, so there is no authentication issues.
I'm in the process of creating local repos for our company servers (CentOS 5.5) and laptops (Fedora 13). And while the CentOS part went perfect the Fedora part is causing major trouble.
But first things first, here's the setup: a central CentOS 5.5 server is running Apache2 and has a VirtualHost listening on Port 8080 for both CentOS and Fedora. The DocumentRoot for this VirtualHost is /data/repo wherein two directories, centos and fedora, reside.
This is the .repo-file for CentOS that works like a charm:
Quote:
[local]
name=CentOS-$releasever - local packages for $basearch
baseurl=url
enabled=1
After the CentOS repository was up and running I follwed the exact same steps and was expecting to find a Fedora repo up and running (I know, I know, silly me...). However, yum complains it cannot download the repomd.xml. The .repo-File is as follows:
Quote:
[local]
name=Fedora $releasever - $basearch
baseurl=http://icld:8080/fedora/$releasever/local/$basearch
enabled=1
gpgcheck=0
protect=1
Yum returns the following error message:
Error: Cannot retrieve repository metadata (repomd.xml) for repository: local. Please verify its path and try again
The path is definitely correct - copying the url and pasting it into a webbrowser returns the correct repomd.xml file, so does pasting it to wget.
Any ideas? Does createrepo need any parameters in order to create a working Fedora repository?
Tried about every repo, listed on Additional package repositories - openSUSE but all give the same permission denied problem on some repom.xml and fail to add the repo.I want to install lame, on suse 11.0.
View 1 Replies View RelatedI get an error while trying to update the repo.
Index of /repositories/server:/php:/applications/openSUSE_11.1
Code:
│Fehler bei der Initialisierung des Repositorys. ─ │
│ │'openSUSE_11.1_php': [|] Failed to cache repo (4). │ │
│ │Verlauf: │ │
[Code]....
that's it! I got OpenSuse 11.2 and the size of the Repo has exceeded the 4 GB limit. This means that the mirror doesn't fit on my USB-stick anymore, nor would it fit on aDVD-RAM/RW (thus I can't distribute the updates anymore). Yes, there are bigger USB-sticks and BR-RWs, but in the end it is pure insanity!
View 1 Replies View Related