My laptop running Ubuntu 10.10 had suddenly go to a dark gray screen that will not take any kind of input other than holding to power button down for 5 seconds. I'm not running any new or odd programs just Firefox, Openofice writer, and Pidgin. When I turn the computer back on I do not see any kind of an error message. I'm looking for any advice that will help me find the cause of the problem.
View 9 RepliesSince having installed Lucid Lynx, I have several complete system crashes a day, no matter which applications I am using. Lucid crashes without any error message and the system reboots. I have had no problem whatsoever with Karmic Koala (also switched from ext2 to ext4 when installing Lucid Lynx). Is there any probable reason for that or a workaround? Can I paste any logs here for anybody to figure out what might be going on? When I try XP which is also install, the system won't crash (so far...), so I don't think it's a hardware problem.
My system:
Mainboard: Gigabyte GA-MA78G-DS3H, AMD 780G, ATX
Processor: AMD Athlon64 X2 4800+ AM2 box "EE" 65W, 2x512kB
Coolermaster Centurion5 Schw. CAC-T05-UW ohne Netzteil
ATX BE Quiet! Straight Power 400 Watt / BQT E5
2x2048MB DDR2 Aeneon PC6400 CL 5, PC6400/800
DVD: LG GH20N bare schwarz (SATA-II)
HDD: Seagate Barracuda 7200.11 500GB SATA II ST3500320AS
Already in Ubuntu 10.10 I faced some odd behaviour after the login, e.g. the icons for maximizing or closing were gone, but after reloading with compizfusion icon, they appeared back (for both compiz and metacity).
After the update to 11.04, certain applications just crashes permanently after some time, like Firefox, Synaptic or Libreoffice (now gone). Additionally the screen shows sometimes orphaned pixel or logs out completely.
I'm using an Intel graphic cards from the notebook Hp 2740p. I couldn't find any errors in the log viewer and also a fresh install of Ubuntu 11.04 in Unity and Gnome as well in Linux Mint, couldn't solve the problem. I also deleted config folders from my homefolder, like .gnome, .gconf, etc. to see if there would be a change. But this strange behaviour still persists.
As I setup a new user the behaviour was gone for sometime, but came finally back after some days, without messing around with any configurations.
We use Ubuntu 10.10 (32 bit) as a backup server.
The machine is quite ild but still working well.
All works very good but every few days it is crashed and freez.
I do not know what real happeny since i do not work on it, but tring to ping it fail and the monitor is blank.
What can I do?
Which log is relevant?
Where/how do I set the retention on system logs to a minimum of 180 days? Further, where do you set password failure enforcement policies?
View 1 Replies View RelatedI removed windows completely from my Dell Inspiron N5010 and installed Ubuntu 10.04.1 64bit. In windows I have the option to create the system image of system's current state so that if something goes wrong I could easily restore my system using that image( I am not talking about windows Restore facility). I wanted to know that if there is something available in Ubuntu also. I cant use Dell recovery media creator as I have deleted recovery partition. I have already used Remastersys and it also did its job well but after restoring my Graphics card driver did not work well.
View 4 Replies View RelatedI get a complete system failure when my CPU is stressed. It's not the temperature because when it crashes the CPU temp is only ~55 C. When it crashes the video freezes but the sound repeats itself. Example. I start handbraking a movie, then open a tv show in VLC. This is what I hear.
Did you get that tire - then it freezes
get that tire
get that tire
get that tire
get that tire
... etc
That continues until I reboot my computer. This crash is pretty reliable, as every time I load my CPU that happens. If I don't do anything CPU intensive, I don't get the crash. Also, if I only load up one core of my CPU, then everything is fine. However if I run something such as prime95 or handbrake (which both utilize all 4 of my cores) the computer will crash within 30 seconds.
Ubuntu 10.04
Corsair 750 TX PSU
AMD Phenom x4 @ 2.3 GHz
4 GB G.Skill 1066 DDR2 Memory
Nvidia GTS 250 1 GB edition
Biostar AMD 770 AM2+/AM2 Motherboard
Three HDs, two are WD of 1 TB and 120 GB, and a 32 GB SSD.
I'm on ubuntu 10.04, and pretty new to it - over the last 2 weeks I've done probably 10+ fresh installs due to me not knowing the system, trying things. I looked for a way to back it up and found this guide - [URL]. When I use the feature as listet, it doesn't exclude the folders, and the system is "almost" the same as pre-recovery - and I'm copy/pasting. Is there a way to make a COMPLETE replica of my system, that I can launch when failed, so that - it's back to when I was "ok".. like all programs install post-copy to be gone..
View 2 Replies View RelatedBeginning on the release day for Firefox 4, my system has been encountering hard freezes (no responsiveness to any key entry and only way to restart is by hitting the reset button). I had installed firefox 4 with no issue, but once it was open, it kept freezing my system. Some addons weren't supported anyways, so I uninstalled it and got back my 3.6. At the time I was using rtorrent, but within minutes of using it since the firefox install, my entire system freezes up.
Naturally I suspect HDD or RAM, but both have been extensively tested. Next I began browsing forums and found some tricks like turning off IPv6 or changing settings via HDPARM, but none have made any difference. I have moved on to using Transmission, and the problem still exists, but it occurs much less frequently.
I have also since then noticed that transfers of files from my 500GB OS/Torrent drive to my RAID 5 array and vice versa moves at 2-4MBytes/s, much too slow. So next I set up my torrent client to download directly to my RAID array, and lo and behold no freezes! Also, while transfering data the system moves at an absolute CRAWL, as in browser windows turning gray, saying that they have stopped responding, etc. I ran a fsck on my 500GB drive, which instantly told me my file system was clean. I'm at my whit's end here! I hate re-posting on a topic, but I feel like I've tried everything!
System Info:
Ubuntu 10.04 32-bit
Kernel 2.6.32-29-generic-pae
AMD Athlon 4450e
1GB RAM, 2.5GB Swap
Gigabyte GA-MA74GM-S2 Motherboard
[Code]...
I would like to find out how to back up a complete Ubuntu system, and then restore it on a clean harddisk.I have been running dual booting with Win XP until now. I am running Ubuntu 10.04, but have installed quite few add-on. I would like to make an Ubuntu-only machine now, with all the same apps still there, but dont want to go and download everything again. I am looking for a way I can back this entire Ubuntu installation up, and then restore it to a clean drive.
View 2 Replies View RelatedI have an Acer aspire notebook.graded from lucid and now I have a really big problem:every time i disconnect the ac-adapter from the pc, the system freeze completely, became unresponsive to commands and to sysrq. i need to phisically turn off the machine and then back on.
View 1 Replies View RelatedJust curious if it is possible to schedule a complete system shutdown and start up?
My box with ubuntu server on it is only used as an ssh/proxy server, so I would like save on energy costs and add a layer of security by completely shutting it down during the hours I do not use it.
My Ubuntu Karmic running system experiences random lockups. There is no pattern in when it will happen, it can go for days without one, or happen every couple hours. Only thing I can notice is that it happens most often when I run Firefox, but when it happens, it happens regardless of me having Firefox open on a website with lots of Flash content or not. When the lockup happens, I cannot move the mouse - the led light on my mouse shuts off, I can't move the cursor, the whole UI becomes unrensponsive, there is no blinking lights on the keyboard, REISUB does not work, only hitting the reset button on my case helps. After reboot, there are no indications of errors in any of the logs that I can see.I have ran memtest for 24 hours, and it completed without errors.
Additional information:
1. LSPCI output:
Code:
00:00.0 Host bridge: ALi Corporation M1697 HTT Host Bridge
00:01.0 PCI bridge: ALi Corporation PCI Express Root Port
00:02.0 PCI bridge: ALi Corporation PCI Express Root Port
[code]....
When I try to shut my PC down (press the shutdown button in KDE 4.3.4), the desktop quits, but the console screen does not appear (the CTRL+ALT+F1 screen). Well, technically speaking it appears but only a still (not blinking) cursor is shown, otherwise the whole screen is blank. This means that not only the X freezes but whole system, because the keyboard is unresponsive too. It happend multiple times now, and every time I reboot after such event, some kde rc files (amarokrc, kmailrc, etc...) get deleted due to the automated filesystem check (unclean umount), which means that I have to reconfigure these apps again.
My home partition is on a separate EXT2 partition (this way I have full r/w access from winxp) and every time this is the only one which gets corrupted. The system partition (which is EXT3) is always intact (no fsck starts on boot). I'm using Debian Squeeze by the way.
when my monitor turns off after 30 minutes, I cannot do anything after. We're talking complete lock down of Ubuntu 10.04 64-bit. Not even alt+printscreen+REISUB reboots the machine; I have to do a hard reboot (which sucks and is hard on hardware).
View 1 Replies View RelatedI have been researching the web for a program which will allow me to backup my entire hard drive so that I can restore my system if need be. I am however unsure which is the best one to use if I want to achieve this:Somehow I want to back up my hard drive containing my ubuntu system byte for byte so that if the hard drive were to fail I could simply go to the store, get a new hard drive, restore my backup and be up and running again without having to do any re installments of ubuntu or any other programs for that matter.
What is the easiest program that does this? I would like it to support incremental backup.rsync with the "Back in Time interface"?bacula?
All of these freezes happen either while I'm in Nautilus or I'm opening Nautilus. The usual Ctrl+Alt+Fx (x being one to six) to get into the backstage does not work. If I have some music open then it would start looping the last couple of seconds.Now generally I would go check the logs, but I see no nautilus logs so what should I check?This is all pretty recent. I think that this started to happen when one day exim4 (and some packages all marked exim) got updated but I cannot be certain. Major playing-around after that would be some Wine issues but the system froze once before all that Wine fun.So step one, what should I check?
EDIT: OK, .xsession-errors ouput:
Code:
/etc/gdm/Xsession: Beginning session setup...
[code]...
I am running an openSuse 11.1 server.
How easy is it to install a complete Bugzilla system for my own internal use?
Is there an rpm that will set it up automatically?
Is it part of the distro? Or 11.2 or 11.3?
What is the easiest way to install it?
Image Hard drive Ubuntu Operating system 9.10 Complete back up and restore. Changing over Hard Drives need a complete back up not just save files. So the image can be restored on any hard drive that restores the computer to its original state before it was imaged.
View 14 Replies View RelatedI am running Fedora 8. Each time I run a YUM command, I get the message that there are unfinished transactions, and to run yum-complete-transaction. Upon running yum-complete-transaction, it fails with this error. How can I remove this uncompleted transaction so I can finish the last one?
View 2 Replies View RelatedI upgraded not so long ago from version 9.10 to 10.04. What never happened before then started. I have system crashes all the time. When I play Solitaire, use Firefox and copy files.
I use ubuntu now for several years (at least since 8.04) and I never had a system crash before. I have a P5P800SE motherboard, a celeron 3.06 GHz processor and use 512 MB of memory. Ubuntu is installed under windows XP professional version 2002 service pack 3.
If not I will return to version 9.10 and wait for version 10.10.
I have an old PC in my basement that I decided to load Ubuntu onto a few months ago. I ran version 9 for a while and then recently upgraded to10.04.Unfortunately, I've been having issues with intermittent system crashes using both versions. Sometimes the computer will work fine for hours and other times it will crash 20 seconds after startup. I'll be able to provide much more information tonight when I get home but for now I wanted to plant the seed in the forum and see if anyone has any ideas.The computer will be working fine and then all of a sudden the screen will go black and then start blinking, switching between a blank screen and a blank screen with a bunch of tiny white squares/lines. When I restart, things seem okay again.
View 6 Replies View RelatedI installed Ubuntu 10.04.1 yesterday, and I've been trying to install my nvidia 240 drivers for it. I've done this multiple times on 9.## and it worked fine. When I try to install them it says i need to shutdown xserver. so I open terminal and type sudo /etc/init.d/gdm stop screen goes blank and all there is is a flashing _ at the beginning. I'm not able to anything except type, but no commands work.
So, I tried starting it up in recovery mode root shell or whatever, and it shows the command prompt. Then I login, and it says welcome, I go to my downloads folder and type sudo sh NVIDIA...256.44.run and it says I need to be in telinit 3, so I get out of the installation and type sudo telinit 3.well that brings me up to a login command so I type my username then it askes for a password, which I also fill in.Now it says incorrect login. So I try again, and it keeps going on, but then I noticed that it puts the first letter of my username infront of Password.And the only way I can get out of that is by Alt + Ctrl + Del to restart, same when I shutdown gdm.
10.04 Ubuntu / Gnome My system has just started crashing back to the Gnome login screen. Tried removing recently installed packages, as well as the repair broken packages from login screen.
View 1 Replies View RelatedI have been using Kubuntu for a LOOONG time now, completely happily without any noticeable problems. But, on my birthday, with the help of a few contributions, I was finally able to upgrade my PC to a Core i7.
And for the most part, things are still smooth sailing. Except for Kopete, which randomly crashes at times, bring the entire beast of a PC to a halt. Basically what happens is it suddenly lets off notification gongs like a machine gun. Then there are windows that popup that say something about "Yahoo Plugin Error". And judging by the number that increases in the titlebar, it makes A LOT of those windows. But the contents of the window itself are never rendered. It usually gets up to about <105> before the entire system just freezes.
The only difference between my old system and this one, in terms of software is the change from 32 bit to 64 bit. If someone could tell me how to fix this problem, or just point me in the right direction, it would be greatly appreciated. This is driving me insane!!
fresh install Ubuntu 10.04 x86Compaq Presario sr1123wmno visual effects System run great other than crashing when ever i try to change desktop image. Not sure witch log file to look at for errors.
View 7 Replies View RelatedWell, turns out that when I rebooted into the installed system a user setup utility launched, but now whenever I try to log in as me, X crashes and GDM starts up again, telling me to relog in.
Now it's the case of "A setup utility launches and I set up my user, only to try to log in and get kicked in the face by GDM, having done all that work for nothing".
When I play a video file whether with VLC or Movie Player the system will crash. The screen will go black with some text output (all I can quickly read is something about pulse audio) then flash black, then text, then black over and over. I tried to edit a video with Pitivi and the system crashed too. I saw an error about gstreamer that time. I set multimedia to No Xv and the test works but when playing an avi the system still crashes. If I test the multimedia with autodetect the system crashes.
View 9 Replies View RelatedI am not sure as to why but rhythmbox actually freezes the system. I am unable to get into another desktop by pressing control-alt-F1, F2 etc. I am not sure how to diagnose this problem. The window loads, and then the system just crashes. According to the software Manager I am using version 0.12.8-1.43
View 3 Replies View RelatedI have just installed CentOS 5 (using "linux text" installation), and now it won't boot. The system crashes after OS selection.
I was told to remove boot media when rebooting, but that doesn't work either.