General :: Not Able To Install Bugzilla Module In Perl
Jul 21, 2011I am using RHEL5 64 bit. I am trying to install bugzilla. While installing i am getting error.
View 2 Replies
ADVERTISEMENT
Software :: Getting Bugzilla Setup On RedHat - Perl Install-module.pl DBD - Mysql ?
Apr 12, 2010I am having some issues getting Bugzilla setup, I have the software on the server and am trying to get the pre-rec's setup.
I am using RedHat 4.1.2-42.
I have all of the required perl modules save one:DBD::mysql
When I try:
I get the following response(this is only an excerpt):
Can't test without successful make Running make install make had returned bad status, install seems impossible.
Slackware :: Building The Perl Modules For Bugzilla 4.x.x?
May 16, 2011I've done a clean install of Slackware 13.37 64-bit and am having trouble with building the Perl modules for Bugzilla 4.x.x (downloaded yesterday with bzr). This same problem exists with both Bugzilla stable and 4.1.2+.Executing checksetup.pl results in
Code:
checksetup.pl
* This is Bugzilla 4.1.2+ on perl 5.12.3
[code]....
Fedora Installation :: How To Install Perl Module At AWS?
Mar 15, 2010I need to install the Perl DBI and DBI::mysql modules at Amazon Web Services. Perl 5.8.8 is installed there as part of the default Fedora linux that comes with an EC2 instance. I am not familiar with Fedora, but have been using Linux for a good while.If anyone could tell/show/direct me to the quickest way to do this.
View 1 Replies View RelatedServer :: Install Different Version Of Perl+module Without Affecting The Existing One ?
May 10, 2011I need to install different version of Perl with needed modules to Test Run a perl script (ASSP) without affecting the existing one as the old version of Perl is buggy with seg fault.
View 5 Replies View RelatedGeneral :: Install Bugzilla On Centos 5.5?
Feb 23, 2011installing Bugzilla on CentOS 5.5 step by step? I want to learn how to install on my own pc, cause I will have to install it later on this semester for my professor.
View 2 Replies View RelatedGeneral :: Install Module U32 Into The Netfilter Module For Kernel 2.6.27
Jan 30, 2011I need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
Ubuntu :: How To Use Perl Module?
Jul 3, 2011How do I use a perl module? Am I suppose to call it from the terminal?
View 2 Replies View RelatedProgramming :: Perl Module Installation Fails
Jan 12, 2011Using perl -MCPAN -e shell then install Mail::Message then yes to everything (except the test that needed an IMAP server) resulted in.
View 3 Replies View RelatedProgramming :: Perl NTLM Authenticating Module
Nov 10, 2010I'm trying to write a script in Perl to download a file that requires NTLM authentication to access, stored on a machine on this network.The file exists, and can be accessed through a web-browser, btw.
View 1 Replies View RelatedRed Hat :: Installing Perl (v5.8.8) Module For Connecting To MySQL
Aug 2, 2010I want to connect to MySQL Database installed on RHEL 5 using perl v 5.8.8.The available DBD perl drivers installed on my machine are:DBM, ExampleP, File, Pg, Proxy, Sponge..I downloaded DBD-mysql-2.1012 and tried installing DBD again but got the following error:Can't exec "mysql_config": No such file or directory at Makefile.PL line 167.readline() on closed filehandle PIPE at Makefile.PL line 169.On searching I found that I need to install libz-devel prior to installing driver for MySQL for Perl.
View 1 Replies View RelatedUbuntu :: Using Perl Module To Retrieve Data From IPod
Apr 29, 2010I am trying to make use of the perl module WWW::Nike::NikePlus to retrieve the data from my ipod but apparently I have no idea what I am doing. I installed the package just as the readme said including all the dependencies. I cant really figure out how to run it, i searched for how to use it and found this : Example use that retrieves and prints your last run information
use WWW::Nike::NikePlus;
my $username = 'my@email.address';
my $password = 'MySecretPassword';
my $locale = "en_us";
my $pin = nike_authenticate( $username, $password, $locale );
unless( $pin ) { print "Authentication failed
"; } .....
#Details of the last run
my ($unit, $last_run_dist, $last_run_duration_millisecs,
$last_run_duration_friendly, $last_run_pace_friendly) = nike_last_run();
print "Last run: $last_run_dist$unit in $last_run_duration_friendly
";
print "Last run pace: $last_run_pace_friendly per $unit
";
So I put it in a txt file and saved it with the extension .pl and of course I put in all my info in the username password fields then made it executable with the command sudo chmod +x nikeplus.pl and when I try to run it with either ./ or perl I get this output:
brandon@desktop:~/Apps/nikeplus$ ./nikeplus.pl
./nikeplus.pl: line 1: use: command not found
./nikeplus.pl: line 2: my: command not found
./nikeplus.pl: line 3: my: command not found
./nikeplus.pl: line 4: my: command not found
./nikeplus.pl: line 6: syntax error near unexpected token `('
./nikeplus.pl: line 6: ` my $pin = nike_authenticate( $username, $password, $locale );'
brandon@desktop:~/Apps/nikeplus$ perl nikeplus.pl
Use of uninitialized value $ENV{"TEMP"} in concatenation (.) or string at /usr/local/share/perl/5.10.0/WWW/Nike/NikePlus.pm line 10.
Use of uninitialized value $last_run_duration_millisecs in division (/) at /usr/local/share/perl/5.10.0/WWW/Nike/NikePlus.pm line 106.
Use of uninitialized value $last_run_dist in division (/) at /usr/local/share/perl/5.10.0/WWW/Nike/NikePlus.pm line 107.
Use of uninitialized value $last_run_duration_millisecs in division (/) at /usr/local/share/perl/5.10.0/WWW/Nike/NikePlus.pm line 107.
Illegal division by zero at /usr/local/share/perl/5.10.0/WWW/Nike/NikePlus.pm line 107.
brandon@desktop:~/Apps/nikeplus$
Ubuntu Servers :: 10.04 - ERROR: Module Perl Does Not Exist
Jun 14, 2010I have Apache/2.2.14 (Ubuntu) DAV/2 SVN/1.6.6 mod_fcgid/2.3.4 Phusion_Passenger/2.2.14 PHP/5.2.10-2ubuntu6 with Suhosin-Patch configured In UBUNTU 10.04 I like to install apache2 mod_perl I make apt-get install libapache2-mod-perl2 and I get: Quote: libapache2-mod-perl2 is already the newest version.
Ok I try sudo a2enmod mod_perl ERROR: Module perl does not exist! how I make Perl work in apache2 UBuntu 10.04
Software :: Attempting To Installing Perl Module Gimp::Fu?
Oct 29, 2010I'm attempting to set up a GIMP scripts for batch operations on groups of image files. Initially I started reading about the Script-Fu syntax but it looked too convoluted (at least for me, with 15 years of Perl experience at work) in a way it does the simpliest of things so I attempted to use Perl instead of Script-Fu. From reading the docs I see that I need to install "Gimp::Fu" Perl module. I installed "cpan" first, started it and issued the command:
install "Gimp::Fu"
and got a dependency problem:
Code:
cpan[1]> install "Gimp::Fu"
CPAN: Storable loaded ok (v2.18)
Going to read /root/.cpan/Metadata
Database was generated on Thu, 28 Oct 2010 17:30:45 GMT
[code]....
Programming :: Perl Module For Getting Information From Remote Machines
Oct 16, 2010I need to get some information like cpu usage,free memory,swap memory and other information from a bunch of remote hosts.Can any one tell me of a good perl module which does that.I dont want to use Net::Rsh or Net:SSH.
View 14 Replies View RelatedSoftware :: Perl Module Installation In Custom Location Using Cpanplus
May 19, 2011I have installed perl5.12.3 in a custom location, ( a NFS share). I have all the libraries created in the same location. This was an attempt not to disturb existing version of perl. I have succeeded doing this.Now, I need to install around 200 perl modules. I tried Bundle option in CPAN shell, it somehow did not work. Does anyone here know off any other better method of installing multiple perl modules. How do I use CPANPLUS to install all the modules. What changes do I make to Config.pm considering custom location of perl installation I have done.
View 1 Replies View RelatedUbuntu :: Install Bugzilla On 9.10?
Feb 1, 2010I want to install Bugzilla on ubuntu 9.10
All the tutorials I found ask to install bugzilla from source.
Is installing from synaptic not advisable?
Ubuntu Servers :: Install Bugzilla 3.6 On Lucid 10.4?
May 7, 2010How to install Bugzilla 3.6 on Ubuntu Lucid 10.4 through the Advanced Packaging Tool(apt-get install) ???
View 4 Replies View RelatedOpenSUSE :: Install A Complete Bugzilla System For Internal Use?
Apr 16, 2010I am running an openSuse 11.1 server.
How easy is it to install a complete Bugzilla system for my own internal use?
Is there an rpm that will set it up automatically?
Is it part of the distro? Or 11.2 or 11.3?
What is the easiest way to install it?
Slackware :: Bugzilla - Permission Denied - Clean Install Of 13.1
Jul 24, 2010I didn't back up the blasted /etc/httpd stuff.
I do a "clean" root-only install; i.e., the only partitions that are formatted are the root and usr partition leaving the others untouched (so I don't have to restore the entire thing every time or fiddle with updating). That leaves almost everything in place with only a few edits and additions to make to get back in business; smart and dumb and the same time, sigh.
The partitions look like this for what it's worth:
Code:
Anyway, my web server comes up just fine and other applications work as expected except for Bugzilla and I can't remember what the heck it is I have to do to get it going again. I add a file, httpd-bugzilla.conf in the extra directory and include it at the end of httpd.conf:
Code:
In the above, /var/www/htdocs/bugzilla is not a symbolic link, Bugzilla is actually installed there (and has worked just fine for a long, long time). And, yeah, I know I'm not really supposed to do that but there it is.
I also run checksetup.pl which completes cleanly (it also sets permission masks and group) and double-check that localconfig looks like it ought to.
Seems like that ought to do it, but...
Code:
General :: Install Perl Packages In Red-Hat?
Aug 9, 2011command list that will install
Perl IO::Pty and Perl IO::Tty modules in RED HAT
Im trying to install a rpm package but I get the following error
Code:
perl IO::Pty need by perl-Expect-1.17-1.rh9.rf.noarch.rpm
perl IO::Tty need by perl-Expect-1.17-1.rh9.rf.noarch.rpm
General :: Configure Bugzilla To Use External Mail Server
Feb 13, 2010Planning to put a bugzilla server for bug reporting at our office. I have loaded and configured bugzilla on one of our machines running CentOS5.4. And there is another machine on CentOS5.4 that is running Zimbra community edition. Both are distinct machines. Zimbra is running fine and so is Bugzilla. I want bugzilla to use this Zimbra server to send mails so that I can use this internal mail server for my purpose.
This is the first time I am putting up bugzilla and have never worked on it but documentation helped. But I could not find any reference on how to do this?
General :: Unable To Access Bugzilla After Lenny Upgrade
Jan 2, 2011I was able to successfully upgrade my debian server from Etch to Lenny, however now I am unable to access Bugzilla via the establish url's.
The error I am getting is:
Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [no address given] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
Here is my error.log output:
[Sun Jan 02 10:58:55 2011] [error] [client 158.114.150.87] Not a subroutine reference at Bugzilla/Template.pm line 59.
[Sun Jan 02 10:58:55 2011] [error] [client 158.114.150.87] Compilation failed in require at Bugzilla.pm line 34.
[Code]....
Ok so after all the searching I did it came down to the simple fact that Bugzilla 2.22 doesn't work with Perl 5.10. I am in the process of upgrading to Bugzilla3 and running into some issues there getting my backup database loaded due to the install couldn't finish.
When you upgrade you are prompted to create a new database or use one already created. When I selected to use one already created is caused a break in the installation and I now I can't seem to get the installation to finish.
Ubuntu :: Perl Modules Using CPAN - Get The Message From CPAN That This Module Is Already Up To Date?
Jun 7, 2010I tried to use CPAN to install a module Algorithm::Loops using "install Algorithm::Loops". I get the message from CPAN that this module is already up to date.But, when I try to use it I get the message:
Can't locate Algorithm/Loops.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at ./test.pl line 4.
BEGIN failed--compilation aborted at ./test.pl line 4.
And indeed, the file Loops.pm is nowhere to be found.Isn't that a contradiction?
General :: Manual Install Perl-5.10.1-3.tar.bz2 On Cygwin?
Jun 6, 2010I have the binaries: perl-5.10.1-3.tar.bz2 and I don't have access (admin privileges) to run setup.exe for cygwin, my question is how can I install manually inside cygwin the module for perl: perl-5.10.1-3.tar.bz2?(or maybe can I get the sources and compile? can someone tell me please how?)
View 1 Replies View RelatedGeneral :: Bugzilla 4.0 Not Recognizing SetEnv Variable For Virtual Host?
May 26, 2011I am attempting to stand up a new server Red Hat EL6 with Bugzilla-4.0 and everything is working expect Virtual Host. By defualt Bugzilla looks for SetEnv PROJECT (variable) in the /etc/httpd/conf/httpd.conf file. I followed the given instructions to place SetEnv PROJECT (variable) under <VirtualHost> however bugzilla doesn't recognize that it is there. When I put SetEnv PROJECT outside of <VirtualHost> then it becomes the default for ALL my different virtual host instead of using what is inside the <VirtualHost> section.
Here is the NameVirtualHost section of my httpd.conf file
NameVirtualHost *:443
SetEnv PROJECT UIDPMO
<VirtualHost 140.188.65.31:443>
[code]....
PS: Here is what Bugzilla 4.0.1 guide says to do: 2.4. Multiple Bugzilla databases with a single installation The previous instructions referred to a standard installation, with one unique Bugzilla database. However, you may want to host several distinct installations, without having several copies of the code. This is possible by using the PROJECT environment variable. When accessed, Bugzilla checks for the existence of this variable, and if present, uses its value to check for an alternative configuration file named localconfig.<PROJECT> in the same location as the default one (localconfig). It also checks for customized templates in a directory named <PROJECT> in the same location as the default one (template/<langcode>). By default this is template/en/default so PROJECT's templates would be located at template/en/PROJECT.
To set up an alternate installation, just export PROJECT=foo before running checksetup.pl for the first time. It will result in a file called localconfig.foo instead of localconfig. Edit this file as described above, with reference to a new database, and re-run checksetup.pl to populate it. That's all. Now you have to configure the web server to pass this environment variable when accessed via an alternate URL, such as virtual host for instance. The following is an example of how you could do it in Apache, other Webservers may differ.
<VirtualHost 212.85.153.228:80>
ServerName foo.bar.baz
SetEnv PROJECT foo
Alias /bugzilla /var/www/bugzilla
</VirtualHost>
Don't forget to also export this variable before accessing Bugzilla by other means, such as cron tasks for instance. For anyone that fell into the same trap as I did. The Bugzilla guide neglects to tell you where to set the SetEnv PROJECT variable. It turns out that you need to add this variable in the /etc/httpd/conf.d/ssl.conf file under each virtual host section. So for me I did the follwoing
<VirtualHost_default_443>
SetEnv PROJECT PDS
Save the file, restarted Apache and everything worked as expected. Although I did include the NameVirtualHost section in /etc/httpd/conf/httpd.conf I don't think it made a difference.
General :: How To Install Perl In Personal Unix Area
Sep 13, 2010I'm working in a lab running a CentOS server with Perl 5.8.8.
I would like to install a newer version of Perl for my personal use only (i.e. do not affect other users). How can I do that?
General :: Adding A New Kernel Module To Wireless Driver Module?
Apr 22, 2010I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View RelatedProgramming :: Socket Programming In Module Perl
Jul 21, 2010Where is the perl module for programming with sockets?
View 4 Replies View RelatedGeneral :: Install The Python Module For Gnash?
Aug 5, 2011How do I install the Python module for Gnash?
But apart from that, what basic concept am I not understanding about installing packages on Linux?
I am used to installing packages using package managers - mostly apt-get and zypper. I have occasionally installed from source, often with no trouble. However I recently installed Gnash and discovered that it has a Python binding that must be compiled from source and this has led down a rabbithole making me feel stupider at each turn.
First, I attempt do a ./configure --enable-python in the gnash source dir. This ends up failing with an error that
package pygtk-codegen-2.0 isn't found
The lead developer, Rob Savoye, was kind enough to point me at packages.debian.org, telling me I just need to locate this package. After many failed searches, I found that the python-gtk2-dev package contains this ... file? script? Great, but I couldn't figure out how to obtain the python-gtk2-dev package. It doesn't exist in any of my openSUSE configured repositories.
So I headed to the GNOME site and searched, found that the PyGTK package contains pygtk-codegen. Download the tarball, cd, ./configure, and this fails because I don't have GLIB. After some more searching I use zypper to install glib2-devel (libglib-2.0 was already installed), and now PyGTK fails to configure because I don't have GObject.
Find that, download tarball, cd, ./configure, fail. I don't have gobject-introspection-1.0, apparently. I DO have gobject-introspection installed, and it's version is ≥ 1.0, but that's what the script says.
So I will readily admit I am new to Linux, but I have to be missing some basic step here. Can anyone give me a clue about any of the above? Is it normal to have to install one dependency after another like this? Is OpenSUSE the wrong distro? What would make this process not so horrible?