I'm trying to use the set application to configure Apache. I'm getting a "setup: command not found" error when I type in "setup" at the command line.
However when I try to install setup with yum, it tells me that setup is already installed.
I'm logged in as root. CentOS 5.5.
I'm using Ubuntu 9.10 and previously had a separate partition with another distro on it. I decided to delete the other distro's home and swap partitions and install XP in place of it. I've been following these instructions: [URL] and [URL] I have gotten to the point where I am booting to the XP CD and want to install it, but I get the message, "Setup did not find any hard disks installed on your computer" when I should be getting to the screen that asks me to select a partition to install XP on. This is what my HDD looks like in GParted:
I want to install XP in the unallocated partition, but I have a feeling I screwed up somewhere along the way and probably don't fully understand the whole thing. Even if I try to format the unallocated partition to NTFS I can't make it a primary partition (I assume because it's within sda2). The very last thing I want to do is delete my Ubuntu partition and start from scratch, but if that's my last option let me know.
In Ubuntu 10.04 grub command prompt setup command does not exist for installing grub.I am trying to recover my Feodra12 OS.Did anyone find alternate command for setup in grub command line for Ubuntu 10.04 ?
View 2 Replies View RelatedSo I didn't notice when I setup my CentOS 5.5 server that I left / as RAID 0 on md1. All the rest are RAID 1. Is there a way I can modify the array to RAID 1 without a risk of data loss? I'm glad I caught this before I setup any other services. I've only setup smb so far...
[root@ftpserver ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md1 16G 3.0G 13G 20% /
[code]....
Here is a thought experiment:
1. Copy vmlinuz and initrd.img from isolinux subdir into /boot
2. Adjust grub.conf to boot to that kernel
3. Reboot to setup
4. Format /boot (actually '/' ) during "fresh install"
5. Proceed with the installation-over-network
I see two possible outcomes:
1. The setup fails to reformat the drive, because it is "in use" by boot kernel
2. The partition is not "in use" and the installation succeeds
Why? Old cluster with broken CD-drives, lacking USB, and no separate /boot partition.
i`m trying to set up a Central Backup Server with BackupPC installed on CentOS 5.6 x86_64, My CentOS has Samba3x / Winbind integrated with Active Directory i found this nice Wiki http://wiki.centos.org/HowTos/BackupPC , to get my BackupPC installed. after installing RPMForge's repo and settin` up the priorities to the repos, http://wiki.centos.org/PackageManagement/Yum/Priorities i get the following error regarding Samba3x Conflicts , i dont wanna miss up my Samba Configuration to install BackupPC, even --skip-broken option does not work for me
[Code]....
I'm from a Solaris (printer.conf) background and having trouble setting up a printer on the network. My CentOS box does not have a GUI interface available. I have been playing with lpadmin trying to add a printer - which it did, but everything is disabled, and the "enable" command is not found on my machine.
How do I make a simple printer on my network talk to my centOS box?
Here's the printer.conf from a Solaris machine that works:
raphael:
:bsdaddr=igppps1,raphael,Solaris:
And the printers.conf from the CentOS box:
lumina# more printers.conf
# Printer configuration file for CUPS v1.2.4
[Code].....
I have installed CentOS 5.5 with no GUI - how do I enable/setup the "mail" client command to be able to send email via my Exchange 2007 mail server on my LAN?
View 1 Replies View RelatedI was using 2.6.28-14 kernel version, it update me to 2.6.28-15. Now I have upgraded kernels many times, not first timer, but this is a first to me. So I have this wierd system setup, don't ask. Where I use lilo instead of grub, just take it as it comes guys, I have to. At any rate, it upgraded all fine, and I restarted, play the blues I got a "No setup signature found" error and lilo won't boot. So I did some searching on web and everyone says to boot up CD and re-install lilo. Well with grub I've done this many times, no prob bob, but lilo won't work.
So I used my super auto grub CD to try to re-do things. Since grub config and grub was still installed on my Linux partition I tried it right. No go of course, grub says it can't find the partition nor can it mount it. So I tried the beta of lilo on the grub cd and it don't work either. Botched it up worse, first it wouldn't do anything on my second drive, just sat there black screen. Then I did it a second time, let's screw it up some more right. Now it doesn't even find a boot loader in the MBR ha ha.
So at any rate, how in the sam heck do I fix this thing? Short of downloading 10.04 and re-installing everything?? Don't want to do this, too much work when I can just upgrade and keep my stuff installed and setup. So I tried running jaunty from CD and re-loading lilo. So everything is working fine right, I mounted drive and apt-get install lilo and ran lilo. So lilo even telling it what config file to use and where won't find things and won't re-install. So just for grins, even though I thought it wouldn't work I mounted my second drive linux partition, the one with the boot info on it, you ready, to root "/". Then I couldn't unmount
I am looking for gcc installation in CentOS 5.4. I cannot use yum install since not connected to internet. I tried to do sudo apt-get install build-essential but received the following error: sudo: apt-get: command not found How to install gcc in my Linix machine?
View 2 Replies View RelatedWe are trying to set up a NIS server on a CentOS system. We need to have a NIS server which can provide NIS authentication to a couple of clients. We are practically new to all this stuff.
Just googled to find some ideas about installing ypserv and ypbind and portmapper. We did all that and also started them successfully. But now the clients are not able to join to the NIS domain . The error log states "YP_DOMAIN NOT BOUND".
I guess we have not entered the /etc/yp.conf, /etc/hosts files properly. Please let us know the detailed steps to setup a NIS server .
Also, please let us know what entries should go into the different /etc/<file_names>? What is meant by HOSTNAME in the /etc/hosts file?
Is there any other files which need to be changed? Are we missing any steps?
Also to add-on, while executing the ypinit command we faced the following error:
At this point, we have to construct a list of the hosts which will run NIS servers. localhost.localdomain is in the list of NIS server hosts. Please cont inue to add the names for the other hosts, one per line. When you are done with the list, type a <control D>. next host to add: localhost.localdomain next host to add:
The current list of NIS servers looks like this:
Is this correct? [y/n: y] y
Error running Makefile.
I installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
[code]....
I get this error when setting up my site. Software error: Can't locate Class/Template.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at /var/www/html/en/subscribe.cgi line 10. BEGIN failed--compilation aborted at /var/www/html/en/subscribe.cgi line 10. send mail to the webmaster (root@localhost), giving this error message and the time and date of the error.
I have tried the following with no success: # yum install perl-Class-Template from the Rpmforge repo [URL] Or use the cpan command 1) # yum install perl-CPAN
2) # cpan
3) > install Class::Template
..
The website I am trying to get working is hosted on CentOS. The version is 2.6.18-194.11.1.el5PAE. Im trying to get migrate the site from one server to another and now the cgi script doesnt execute correctly as it requires the class Template which is in a folder within the website tree.
I ended up setting up a basic linux file server as a pdc for that office. Our main office is a windows 2000 ads domain. The two offices are connected with a vpn. I only have two users at the new location so I simply have the linux and samba usernames/passwords setup manually. I would like to know if it is possible to setup a domain trust between the two sites so I don't have to create a username/password in the remote site for every user at the main office to access. I did some searching but came up empty.
View 5 Replies View Relatedi am trying to install openbravo on my server.I have installed all the pre-requisites as ANT, JDK(though i installed JRE).
Everything goes fine untill the ant setup and then running the setup-prerequisites...file (don't remember the exact name).
As soon as i issue ant install.source it ends up with some errors..
I have the current disk setup :
disk1 :
Code:
sda:
(primary) sda1 ntfs
(primary) sda2 ext3 (mounted as / )[code]....
Before i set up the raid, but with this exact partitioning, the system booted perfectly. When i installed mdadm and created the raid1 mirroring on sda6 and sdb1, the init got screwed up, and all i get is a shell on initramfs, from where i can inspect that sda is binded on md, and cat /proc/mdstat tells me that i have an inactive sda[4].I can't mount the root partition (sda2), because it's busy (i suspect dmraid to lock it), which is, i guess, why init cannot be found.
I wonder if my error is to setup a raid array using a logical partition contained in an extended partition (but i hardly see why it would not work - but the sda bind and the sda[4] in mdstat seems to tell me that it does not), or it's just the initrd that is improperly configured. The other things that bothers me, is that changing the partition type of the raid partitions (fd to 0 - Empty), to disable raid autodetection, resulted in the same behavior on boot. Which might lead me again to think about configuration file problem instead of improper setup.The live cd doesn't not seem to recognize raid, so i can't inspect problems any further, but i could inspect system configuration, but i don't really know where to start.
Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?
[Code]....
I want to setup a FAI server for which I was looking for the best method of mirroring the Debian Lenny. I want to setup a local mirror with the best method available for mirroring. If it is ftpsync, please provide me some best ways of doing it. I tried ftpsync mirroring but that was not getting properly working due to insufficient I want this mirror to be accessible in my FAI setup so that I can start the installation on multiple machines and start the updates and package installation to be done from the same local mirror.
View 1 Replies View RelatedI've been all afternoon trying to install Ubuntu Lucid on my fakeRAID 0 configured (2) HDDs and am unable to set GRUB up. The fake RAID setup is provided by Intel Matrix Storage Manager, it is correctly enabled and the BIOS is also correctly set up -- in fact, I've managed to install Windows 7 with no significant hitch. After struggling with partioning the drives (had to follow advice I found on a very helpful guide online [0]), creating the filesystems AND getting Ubuntu's installer to actually do what it is supposed to do, I now cannot seem to set GRUB up. My system, as it stands, is unbootable at all; via live CD only.
This is how the RAID0 dev is partitioned:
Code:
# fdisk -l /dev/mapper/isw_ecdeiihbfi_Volume0
Disk /dev/mapper/isw_ecdeiihbfi_Volume0: 1000.2 GB, 1000210694144 bytes
255 heads, 63 sectors/track, 121602 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 131072 bytes / 262144 bytes
Disk identifier: 0x6634b2b5 .....
i try to setup sun virtual box but it show there are no bootable image found.
How to attach my XP to this VM ?
I have an old Dell Dimension 2400, currently running winXP. It has a second hard drive attached onto which I'd like to install ubuntu. The drive is visible in My Computer, but when I began the install process, ubuntu didn't give me any option to install on the second drive; it doesn't seem to see it's there. I went into the Setup menu and the drive isn't found there. Does anyone know what I need to do to configure things so that I can get ubuntu onto the second HD?
View 2 Replies View Relatedgetting this message when trying to install XP."Setup did not find any HD installed in your computer." I have Ubuntu installed on another partition so it makes no sense that XP doesn't recognize my HD.
View 2 Replies View RelatedI'm installing LoL using Wine and I can't find where setup has put the files. When I type "wine lol.launcher" it says "wine: cannot find L"c:\windows\system32\lol.launcher". For that matter I can't find where the setup program has installed any of the LoL components
View 1 Replies View RelatedIm trying to set up my workflow to a terminal-based setup, so that accessing my computer through SSH will provide many of the things I need and use right off the bat. I have Mutt working great with my GMail account, so that's good. I do have a question though. Using the application Calcurse (featured on Lifehacker a few days ago, [URL] I am at a loss to figure out how to interface with Google Calendar. Is there a trick that Im missing, or does anyone know of another terminal app that plays better with Google Calendar?
Also, I was looking for a 'Digital Clock', essentially, again, a terminal/text based large print clock; similar to the one in the lower left corner on the attached pic. I was looking for a telnet server from the Atomic Clock, but no such luck so far.....
I've just installed 11.2 KDE 64bit and I'm having trouble getting CUPS setup. I have a hp5440 deskjet that is not listed but I have used another model in the past with another distro. But when I put in my username and password it doesn't take it. there is no other password. How do I set up CUPS? Can I used hplip instead?
View 3 Replies View RelatedWith new installs of openSuse 11.4 I've hit a printer problem. I can run hp-setup (or hp-toolbox) for the wireless Officejet j6410 and it is recognised. The right driver is selected. Then when I choose add printer it all falls over with the error message: error: Printer queue setup failed. Could not connect to CUPS Server Is user added to "lp" group(s) error: Fax queue setup failed. Please restart CUPS and try again.
The user is added to the lp group. I have this problem with my 64 bit desktop and 32 bit laptop installs of 11.4, it all worked perfectly in 11.2. I've used the Cups web interface to set up the printer now and can print from both machines, but I would prefer to use the hp-toolbox, which has several convenient features. Where do I go from here?
I am trying to setup a 5 monitors setup using 3 cards, but I am stuck at 3 monitors for now. The third card is not plugged yet, so the current setup is:
NVIDIA 8800GT (binary driver 195.***)
--->1680x1050 LCD (VGA)
--->1680x1050 LCD (DVI)
ATI HD5450 (3 output, but I think the OSS driver only support 2, corrdct me if I am wrong) (OSS driver)
--->1280x1024 LCD (DVI)
---> 1366x768 TV (VGA)
[Code]...
i am trying to set up LAMP on an old pc i have installed linux, apache, mySQL and PHP following this guide Installing Apache2 With PHP5 And MySQL Support On OpenSUSE 11.3 (LAMP) | HowtoForge - Linux Howtos and Tutorials. i have installed phpMyAdmin but when i try and acess it i get this error
Error
MySQL said:
Cannot connect: invalid settings.
phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server.
[Code]...
I setup a HTPC about a month ago, and just expanded my storage by adding two 750GB drives in addition to my OS drive. I am using Ubuntu 9.10 as my OS and need help setting up a raid 1 on the two 750GB drives.
gparted shows the two drives as /dev/sdb and /dev/sdc
