OpenSUSE Hardware :: How To Setup Monitor/TV
Aug 9, 2011
monitor connectedbut whene to watch movie i connect my TV using HDMI cable.when i was using windows i could setupnd it would stay theat way but not in linux.Issue/RequestRequest: i want to see on my TV an empty Desktop.'m able to configure it all in ATI Catalyst.BUT)Issue : after restart or after i disconnect HDMI cable confugurations wont save. well i would be able to live with it, but to get an empty desktop on my TV i have to shoose multi-desktop, but to activate it i have to restart my PC again.
View 9 Replies
ADVERTISEMENT
Oct 22, 2010
This is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).
This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.
View 3 Replies
View Related
May 20, 2011
I'm trying to get an external monitor hooked up to my laptop with the intention to use both simultaneously using TwinView. Actually, I'm not "trying to make it work": everything works fine, using NVIDIA X Server Settings. However, when I reboot these settings are lost and I have to manually expand my desktop again.
I've found that running NVIDIA X Server Settings as root should allow one to "Save to X Configuration File", in order to let it automatically load the right settings. When I click this option, however, I'm asked to manually provide a file name with my home folder as the default location. I'm confused how to proceed - where should I save this configuration? Or should I be taking a completely different approach in the first place? (note: KDE 'Display and Monitor' doesn't work. Only when I use the NVIDIA-thingy KDE will recognize that my desktop is expanded to a 3600x1080 resolution)
View 9 Replies
View Related
Feb 26, 2011
I was successful in getting the ATI catalyst software to set the displays to maximum resolution. The second display is dark. It shows a white "X" cursor if I move the mouse to the second screen. The KDE desktop configuration manager does not recognize the second monitor.
Here is the output of: cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen "aticonfig-Screen[0]-1" 1920 0
[Code].....
View 9 Replies
View Related
Jan 15, 2011
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
View 9 Replies
View Related
Jan 21, 2011
I have just installed Os 11.3, it is my first time to try Linux. Install went fine have Dual Boot Win7 and openSuse 11.3 KDE I have a 26" TFT TV as Monitor 1 DVI and Dell 16" as Monitor 2 VGA all working fine . Autoconfig started and TV display vanished, install finished and went into display settings to check problem and for some reason it is saying both displays are on my 16" Dell. I will Add Screen Shot to show problem. wanted to switch to Linux for years but never had the guts, i was hoping to learn Linux with this distro and when have a grip on it drop windows and use Linux as Primary.
View 4 Replies
View Related
Jan 10, 2010
It will be quite literally bare, consisting of motherboard http://www.axiontech.com/prdt.php?item=88615, CPU, RAM, power supply only (won't even have case). I'm working as contractor at 3M and would like to reduce my baggage when I move.I will probably boot Debian on USB flash and access the machine with SSH, but my main dilemma will be how to setup the system while trying to avoid buying a keyboard and monitor. I can test the USB boot on my laptop, but I will need a way to diagnose problems. Beeping the speaker so I know the system is at a certain state would be a clumsy solution, assuming the motherboard even has a speaker.
View 9 Replies
View Related
Oct 1, 2010
The G4 has two cards with me only using one.Booting into Linux single then running Xorg -configure gives me the output on both monitors from both cards.Rebooting after this setup the mouse does not work. A hard reboot and a phigh reset the display previous defaults.Do I need to edit the xorg.conf.new or the xorg.conf?
xorg.conf.new
Section "ServerLayout"
Identifier "X.org Configured"
[code]...
View 4 Replies
View Related
Jun 5, 2011
I have asked about this issue before to no avail but since then I have been able to narrow down the main cause of the crashes. My setup:
HD5770 - Running 2 19" LCD's
HD3300 onboard Running 1 47" lcd
Whenever I am in firefox and have pictures open in the browser and move the mouse to the other 19" monitor it crashes, not everytime but often enough to be annoying. Sometimes when it crashes the screen goes blank and I wind up at the login screen, other times it just goes blank and stays blank.
View 14 Replies
View Related
Dec 27, 2010
I am running Fedora 13 on a PC I built myself - MSI motherboard 785-E53. It has onboard DVI which my primary monitor is hooked to. I added an older 17" CRT to the onboard analog output and the main desktop with my icons and panels immediately switched to the CRT. Kernel is 2.6.34.7-66.fc13.i686, lspci -v says VGA compatible controller ATI Technologies Inc RS880 (Radeon HD 4200). How can I get flatscreen on the DVI output to be the primary?
View 10 Replies
View Related
Aug 8, 2011
Does anyone know what program I can use to set it up so when I plug in a VGA or HDMI monitor it automatically sets up video output?-P.S. -This is on a ArchLinux install with PekWM for the window manager
View 5 Replies
View Related
Jun 15, 2011
I created a dual monitor setup in Slack 13.37 using the KDE systemsettings -> Monitor Setup function. (Sadly I had to rebuild ~/.kde in the process, but that's a different story.)
I verify that ~/.kde/share/config/krandrrc contains the new monitor setup (both screens active). I have saved a startup session with krandrtray running. However, when I logon, the system always starts with both screens in clone mode. I always have to go into systemsettings or krandrtay and redo the dual monitor configuration.
Is there a better way? Do I have to create a suitable xorg.conf (which I will try when I get home) or is there another way to boot into the dual config automatically?
View 4 Replies
View Related
Apr 29, 2015
I have some very strange issues with my tripple monitor setup on debian wheezy. I have acer aspire V3 laptop with i915 Intel (Intel® HD Graphics 4000) as part of i3 and nvidia GT 740M which I never managed to get working with or without optimus to any degree whatsoever. What I want is a reliably working triple monitro setup. I have 2 additional DELL u2412m monitors which I did manage to get to work on few occasions by more or less randomly turning stuff on and off via lxrand and KDE systemsettings (so I do knwo for a fact that tripple monitor setup works). Arandr doesn't work, and executing xrandr from cmd doesn't work. I can relatively easily get the 2 monitors to mirror each other, but to get them to work separately is extremy difficult. It's always the same error but the well known crt. For example:
xrandr --output VGA1 --mode 1920x1200 --pos 3840x0 --rotate normal
xrandr: Configure crtc 2 failed
xrandr --output VGA1 --mode 1920x1200 --rotate normal --right-of LVDS1
xrandr: Configure crtc 2 failed
When it did work I copied arandrs script in hopes it would work, but it doesn't. Obviously, here is the issue that the crtc can not be configured so if somoen could tell me why and how to get the damn thign to use a specific crtc it would be awesome. Also, I noticed that when I hit "identify monitors" in KDE systemtools, it would say VGA HDMI for both VGA and HDMI outputs.
Here is xrandr output from when it worked:
Code: Select allScreen 0: minimum 320 x 200, current 5760 x 1200, maximum 8192 x 8192
LVDS1 connected 1920x1080+1920+0 (0x46) normal (normal left inverted right x axis y axis) 382mm x 215mm
    Identifier: 0x42
    Timestamp: 143521
    Subpixel:  horizontal rgb
    Gamma:   1.0:1.0:1.0
    Brightness: 1.0
[Code] ......
Here is now:
Code: Select allScreen 0: minimum 320 x 200, current 3840 x 1200, maximum 8192 x 8192
LVDS1 connected 1920x1080+1920+0 (0x46) normal (normal left inverted right x axis y axis) 382mm x 215mm
    Identifier: 0x42
    Timestamp: 5817108
    Subpixel:  horizontal rgb
    Gamma:   1.0:1.0:1.0
    Brightness: 1.0
[Code] ....
View 2 Replies
View Related
Mar 30, 2010
Suppose i'm this guy right there:[URL]..And all i'm used to seeing is this:[URL]..And clearly NOT this:[URL].. And my technical expertise dates back to early eighties, a few lines of x86 assembly and a few lines of C. And i haven't written a single line ever since (got bloody rich since win 3.1 shipped).
How can i get my gorgeous (20" portrait 30" 20" portrait) setup workin'? Just like in ol' good win xp - each monitor is handled like a separate entity not merged together in one big screen? A step-by-step guide would be perfect!
Both v-cards are ATI, supposedly working from the same drivers. I don't mind using a different linux distribution, if it makes matters any easier.
View 9 Replies
View Related
Jun 19, 2010
I loaded Lucid on my system, dual booting w/ win7. I have two monitors, and i need it to have extended desktop view. How do i enable this?
Here is my LSPCI
Right now my monitor dislay is not want i wanted.
View 1 Replies
View Related
Dec 3, 2010
I am wondering if there is a basic tool out there that will work with graphics card powered by FOSS drivers that allows to adjust resolution (and configure secondary monitors) and then save that configuration so it can automatically be restored next time the system starts up.
View 1 Replies
View Related
Jan 18, 2011
I have 3 monitors from left to right:1: dvi2: vga3: usb displaylinkBy default, the main ubunut screen shows up on the left #1 monitor.I tired swapping these around, ie going 213 but that messes it up. Is there a way to change the main listing|+menus to screen 2, which ius my middle screen? In Windows, this would be called the primary desktop.Secondly, how do I get screen 3 to work. Does it need a displaylink adapter for Linux?
View 5 Replies
View Related
Jun 29, 2011
I'm using the proprietery nvidia drivers on 11.04. I have a dual monitor setup with xinerama. The login screen appears to work fine, I can move my mouse between screens, and only one screen (right) has the login prompt. When I login, both screens show the same thing. While I can move my mouse across, I can only interact when it's on the left side.
I found this: [url], but I cannot start the display settings in the XFCE control center due to "missing randr extentions". Yesterday, I was using Kubuntu 11.04 on this same machine, and the dual monitor setup worked fine.
View 8 Replies
View Related
Mar 11, 2010
i have done most of the setup for MRTG network monitor tool.
But i m stuck at configuration part.
the actual MRTG guide says following.
I m little confused about what should i put inplace of community@router.abc.xyz.
Quote:
The next step is to configure mrtg for monitoring a network device. This is done by creating an mrtg.cfg file which defines what you want to monitor. Luckily, you don't have to dive straight in and start writing your own configuration file all by yourself. Together with mrtg you also got a copy of cfgmaker. This is a script you can point at a router of your choice; it will create a mrtg configuration file for you. You can find the script in the bin subdirectory.
cfgmaker --global 'WorkDir: /home/httpd/mrtg'
--global 'Options[_]: bits,growright'
--output /home/mrtg/cfg/mrtg.cfg
community@router.abc.xyz
This example above will create an mrtg config file in /home/mrtg/cfg assuming this is a directory visible on your webserver. You can read all about cfgmaker in cfgmaker. One area you might want to look at is the possibility of using --ifref=ip to prevent interface renumbering troubles from catching you.
If you want to start rolling your own mrtg configuration files, make sure you read mrtg-reference to learn all about the possible configuration options.
View 1 Replies
View Related
Dec 3, 2010
I am wondering if there is a basic tool out there that will work with graphics card powered by FOSS drivers that allows to adjust resolution (and configure secondary monitors) and then save that configuration so it can automatically be restored next time the system starts up
View 3 Replies
View Related
May 18, 2011
I have just bought 2 monitors to be used as a x3 multi setup and 2 graphics cards the same make and model (ATI Sapphire Radeon HD5450). This all works in Windows 7 but I have just booted into Ubuntu and removed the old nVidia drivers and got the supported driver. The problem is only 2 monitors are detected as it would seem that it's only picking up 1 card.
View 1 Replies
View Related
Mar 22, 2016
I am wondering if it is possible to have programs remember which monitor they were last placed on when re-opening them?
View 1 Replies
View Related
Sep 2, 2015
Just installed Debian 8, coming from Ubuntu12, it seems I cannot get my dual monitors to work as it should.
I want two monitors side by side, currently I have two identical outputs. I looked around a bit and register two possible problems.
root@bigcem101-debian:/home/bigcem101# xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 400, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
1024x768 0.00*
800x600 0.00
640x480 0.00
720x400 0.00
Hence, problem 1: it is as if there is only one monitor detected. Then I tried to look for Xorg.conf ..... and: problem 2 xorg.conf is not there. This seems to be normal but when I installed my Ubuntu years ago it was still there and one could manually set things. There must be something new I am missing.
Card:
VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV670 [Radeon HD 3690/3850]
It seems I have both ati and radeon installed.
root@bigcem101-debian:/home/bigcem101# X -configure
(EE)
Fatal server error:
(EE) Server is already active for display 0
I am clueless.
View 0 Replies
View Related
Mar 10, 2010
I just installed Ubuntu 9.10 this evening. I have a Nvidia Geforce 8500GT video card with two monitors hooked up (one to the cards VGA, the other to the DVI). I installed Nvidia drivers and Ubuntu is working with both monitors fine.
The problem I am having is it chose the monitor plugged into VGA as the primary (uses that monitor for the toolbars) when I really want them to go on the monitor that is plugged into DVI. Is there anyway for me to switch which monitor Ubuntu treats as the primary?
View 2 Replies
View Related
May 2, 2010
Upon upgrading from Karmic to Lucid, Everything comes up, seemingly fine. Once logged in to the OS, my three monitors show the desktop wallpaper as well as all the icons on the desktop. A few programs that I have set to autostart do so.
However for some reason, I can only access one of the three monitors. (And not the one with the gnome-panel.) As soon as I drag my mouse from my third monitor onto the one next to it, I loose complete control of it, and it starts dancing all over the place. If I try to drag a window from one screen to the next (using Alt-Left CLick + drag and not moving the mouse onto the other monitor), the the app goes from one side of the working monitor to the other side (like it's wrapping around). Though I can see it on the other monitor for a little bit until I get it far enough for it to wrap.
Here is my xorg.conf:
Code:
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[code]....
View 4 Replies
View Related
Jul 20, 2010
I need to play a info movie on a monitor through VGA. When done, then re-start the movie and continue to run it, forever. How do i do this? If I install a ubuntu 10.04 server, or a very stripped down ubuntu version (i dont know one) then how do I setup VLC to do what I want it to? All I can find is stuff about streaming over a network, and nothing on how to stream (local) over vga.
View 9 Replies
View Related
Jul 22, 2010
I recently got a signal conversion box so I could route my netbooks monitor-out port to my TV. The idea being that I could effectively set the TV up as a separate monitor for watching movies on whilst I worked using the netbooks own monitor. It seemed to work initially, the Monitors dialog box could easily detect and setup the TV as if it were just an external monitor however I can't seem to play any kind of video on either screen when this is set up. All I get in Totem, Mplayer, VLC and skype is just a black area within the applications window. The sound works fine so this is clearly just a video problem.
It only seems to occur when I configure the system to use the TV as a separate monitor. If I tell it to display the same thing on both monitors all video output works fine.
View 5 Replies
View Related
Nov 11, 2010
I'm trying to set up and run Monit to monitor an Apache2 webserver, I want to be able to ensure Apache is running and if it's not have it restarted with an email alert sent out.
The monitrc (edited for relevance) looks like:
Code:
check system *server name*
if loadavg (1min) > 4 then alert
if loadavg (5min) > 2 then alert
[Code].....
View 8 Replies
View Related
Jan 18, 2011
I am running a multi monitor setup with xinerama, and everything works great except when I try to play an FPS such as OpenArena. The mouse doesn't work, it gets stuck to the screen edge.
View 6 Replies
View Related
Mar 11, 2011
I am trying to setup a dual monitor on my system. I have gone through many posts and did the following.Downloaded EnvyNG to download relevant ATI drivers and eventually I got to a point where I can see that ATI is listed under Hardware drivers. But, from here, how do I actually set dual monitors?. I am looking for some interface like Catalyst, but couldn't find one after the drivers got installed. What am I missing here?I went back and forth, but after restarting the PC, the resolution goes to 800X640 and I have no option of setting dual monitors. I reset the options in /etc/X11/xorg.conf to let Ubuntu use the default drivers.
View 2 Replies
View Related
