OpenSUSE Network :: Rror: Could Not Start Process Unable To Create Io-slave
Aug 10, 2010I get the error: Could not start process Unable to create io-slave: klauncher said: Unknown protocol 'magnet'.
View 3 Replies
ADVERTISEMENT
OpenSUSE :: Ktorrent Frequently Quickly Flashes A Message - Klauncher Unable Create Io-slave For Kde Proxy
Mar 28, 2011Ktorrent frequently quickly flashes a message, which I believe says something like :
klauncher unable create io-slave for kde proxy
OpenSUSE :: Plasma And Amarok : "Unable To Create Io-slave" / Resolve This?
Feb 15, 2011Sometimes the KDE notifier shows up an error that freeze up plasma creating a bucle for infinite notices saying the same thing: "Unable to create io-slave: klauncher said: unknown protocoll <<amarok-sqltrackuid>>".
Sometimes same notice appears about 16 consecutive times before plasma crashes.
This is:
KDE 4.6, Amarok 2.4, openSUSE 11.3 32bits.
Red Hat :: Correct Process To Create Network Names On RH?
May 27, 2010I am playing around with RH for the first time. I have two applications which insist on using names for network ranges - so they need /etc/networks. I created one on the RH box as suggested via google but the apps still cant see the names (basically they are not reading /etc/networks). What is the correct process to create network names on RH? Basically the equivalent of solaris /etc/networks?
View 4 Replies View RelatedOpenSUSE :: Rror: Error(-30987) Getting "" Records From Requireversion Index
Sep 3, 2011I just reinstalled opensuse 11.4 on a lenovo ideapad. The install went well and afterwards I was installing other packages. In the midst of this I started getting a error both from the gui software management package and zypper.(I tried zypper to see what would happen). I thought at first a simple refresh of the repos or a reboot would probably solve this but it did not.All attempts to do any software manage failsnow.The basic error is ( tail of a long list from zypper)error: error(-30987) getting "" records from Requireversion index error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found error: error(-30987) getting "" records from Requireversion index error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found error: error(-30987) getting "" records from Provideversion index from a zypper update and something about the same from the gui. How can I solve this?
View 5 Replies View RelatedUbuntu :: Init: Failed To Spawn Ufw Pre-start Process: Unable To Execute: No Such File Or Directory
Jun 12, 2010I am using Ubuntu 10.04 LTS. Two days ago I updated using update manager. After that I can not boot Ubuntu. When I trying to boot system showing message " Ubuntu is running in low-graphics mode Your screen, graphics card and input device settings could not be detected correctly. You will need to configure these yourself" But I can not configure it.I can not boot to 'recovery mode' also
/var/log/boot.log
Code:
fsck from util-linux-ng 2.17.2
/dev/sda6: clean, 304282/1680960 files, 2964945/6723194 blocks
init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
[code]....
Now I am using Live CD.
General :: [Redhat 5.5] Unable To Access Network From An Oracle-started Process?
Jun 9, 2011We have a Oracle 11.2 database running on Red Hat 5.5. The database have a scheduled job to fetch some files from another server using ftp, and herein lies the problem.he job runs a pl/sql that runs the function in an (by us compiled) external libraryThe ftp-functionality itself is done by using libncftp and it's API's.The process starts correctly, but then trying to login to the actual ftp host, ncftp only reports "Unknown username/password" (which is not the case).I have the exact same code in an executable and when run from an interactive shell, it works fine.So the only thing I can come up with, is there are differences when the process is started by Oracle, rather then being ordinary" process.And I am stuck.If there are any environment variables, paths etc missing when running the extproc-process, how do I find out which?Because the real problem is NOT wrong user or password.
View 8 Replies View RelatedOpenSUSE Network :: Create A Home Network To Share Files - Scanner And Printer
Dec 31, 2009I have four PCs in my house that are running opensuse 11.2 and I want to create a home network to share files, scanner and printer.
View 4 Replies View RelatedOpenSUSE Network :: Create A Gateway Server That Allows Virtual Private Network Connections?
Feb 26, 2010I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies View RelatedOpenSUSE Network :: Create Network Bridge / Device Hooked Up Via Ethernet Had No Internet Connectivity?
Feb 25, 2011I'm on opensuse 11.4 (11.3 won't work with my monitor).
My computer gets internet through wireless and I want to share that internet through its ethernet port. So far I've tried using Knetworkmanager to create a network bridge between my wireless and wired connections. I created a new wired connection and shared it using the ip address settings. I was able to get both connections active, but the device hooked up via ethernet had no internet connectivity.
I also tried this command:
echo 1 > /proc/sys/net/ipv4/ip_forward
but another test resulted in the same fashion (no internet on wired). I believe anything I add to /proc should have an immediate effect, correct?
Server :: Unable To Configure Slave Nodes On Rocks Cluster?
May 28, 2010I am trying to setup Rocks Cluster on a Cluster containing 1 Master node and 23 slave nodes connected via a Switch. The master node's eth1 is connected to public IP and eth0 is connected to the slave nodes via the switch.
I was able to install the Rocks cluster on the machine, I configured the IP for master through DHCP. When I run the command 'insert-ethers' on the master node, it doesnot get me any slave nodes.
setting up the Rocks cluster on all the nodes?
Ubuntu :: Init: Failed To Spawn Network-manager Main Process: Unable To Execute: No Such File Or Directory
May 27, 2010I just updated from 9.04 to 9.10 (it's a long story, and I still can't go beyond 2.30).The update got rid of WICD, which is what I used and installed network-manager. Network-manager was not working at all, so I uninstalled it again and installed WICD. I could connect perfectly and had no problems.However, now the computer hangs during boot, saying that init can't start network-manager. I assume that something went wrong during the uninstalling process, since it wasn't updated.
This is the message: init: Failed to spawn network-manager main process: unable to execute: No such file or directory.
So how do I update it or manually change it so it stops requesting network-manager?
OpenSUSE :: Create A Exe To Start Vnc Viewer?
May 31, 2010I am trying to create a icon linked to a exe script. I need the script to open vnc viewer,input the ip/port #, then enter password, and execute. The server is all set up. I have been using it with vnc viewer on XP no problems. Without a GUI for the viewer.
View 8 Replies View RelatedOpenSUSE Network :: Create A Network Policy Server?
Jun 1, 2011how to create network policy and system policy in opensuse11.4 and domain policies also???
View 1 Replies View RelatedOpenSUSE Network :: Susie 11.4 Network Manager Doesnt Start At Bootup
May 22, 2011I am using an Acer Aspire 5536 AMD dual core laptop with a 64bit installation of Susie 11.4. Using 11.2 I had no problems connecting to the wireless router. As soon as 11.4 was installed, clean install, and the laptop rebooted, network manager failed to start, until manually invoked and then enabling networking through the system tray. Even after this it will not connect to a wired or wireless network sometimes for more than 30 minutes.
View 9 Replies View RelatedOpenSUSE Network :: NFS - Mounting During Boot Process On 11.4?
May 11, 2011Using OpenSUSE 11.4 on a backup server. At boot, it needs to connect to the main server's NFS share. Watching the text scroll up the screen, it's obvious that the system waits for anything up to several minutes showing 'mounting NFS...'. Once it (eventually) passes that point, the rest of the boot procedure is as fast as expected.
If NFS is disabled at boot, normal boot times are restored. If the NFS client is restarted via 'rcnfs restart' once the system is up and running, it's instant. If NFS is disabled at boot and started manually afterwards, it start instantly. Once running, NFS behaves normally. The backup server has two ethernet ports, connected via a switch to the main server, which also has two ethernet ports. All ports are configured via DHCP from a router, with all addresses reserved on the router so that all important devices are kept at the same locations.
OpenSUSE Network :: Start Network Interface At Virtual Terminal
Mar 1, 2010I would like to use zypper to update openSUSE 11.2 through the Virtual Terminals (tty1 thro' tty6).
Network Interface is wlan0 (Wireless LAN, home network through a Router) that requires a password using WPA2.
My question is how to start wlan0 through the command-line ?
OpenSUSE Network :: Cannot Start Network Manager - To Configure My Wlan ?
Nov 27, 2010I have just installed opensuse 11.3. I am absolutely new for Linux and for this forum. I have tried to open Network manager to configure my wlan. But its not starting. How to start network manager and configuring my wlan.
View 4 Replies View RelatedGeneral :: Unable To Start Network Service On My Centos Box
Nov 28, 2010I am unable start network service on my centos box. /etc/init.d/network start device eth0 does not seem to be present, delaying initialization lspci | grep Ethernet
Doesn't show any results. It seems os doesn't identify my NIC. I am using compaq presario model pc
OpenSUSE Network :: Samba 3.5.1 Process Unexpectedly Died
Apr 13, 2010I updated Samba to 3.5.1 as shown in: Fixing "Authorization Dialog" bug in Samba for 11.2 - openSUSE ForumsWhen I copy files between two copies of Samba in two openSUSE 11.2 PC's with the new update, I get Samba Process Unexpectedly Died (in Dolphin). This happens going from Computer 1 to 2 or 2 to 1, it does not matter and the error is the same.
After reverting back to Samba version 3.4.2 in both PC's, all files copied between PC's work fine again. Though the "Authorization Dialog" bug is gone, not all seems right with the newest update version.
OpenSUSE Network :: Already Logged In With Process Id But No Page Is Open Up
Jul 22, 2010I installed opensuse 11.3 in my laptop compaq presario cq40 144TU consisting of Core2Duo T5800 with 4 GB DDR2 RAM. After installation of 11.3 i update the OS from online. i have a cable net with IP address / subnet mask / Gateway / DNS. All are working fine but all of a sudden there was a power cut in our locality and my cable net was delinked.
When the elecricity came again i tried to connect the internet for online updation, but all in vain. No page is openup though the terminal told me that "You are already logged in with process id 1425." When i typed the command to kill the process it said that there is no such process running.
OpenSUSE Network :: 11.3 : Iscsi Interferes With The Book Process?
Mar 10, 2011I am running SuSE 11.3 ( 2.6.34.7-0.7-desktop) on a Dell Laptop I am using an external NAS (QNAP-809pro) that connects to the laptop via iSCSI When my laptop boots I get an error that stops the boot process and gives me the filesystem repair terminal: ther I have to comment out the iSCSI lines from /etc/fstab and reboot normally. This is my fstab with commented-out iscsi mount lines
Code:
/dev/disk/by-id/md-uuid-16c447dd:e92ee13a:7e2f04b9:2688e99d-part5 swap swap defaults 0 0
/dev/disk/by-id/md-uuid-16c447dd:e92ee13a:7e2f04b9:2688e99d-part6 / ext4
[code]....
OpenSUSE Network :: Network Management Disabled After Start On 11.2
Dec 19, 2009I tried connect to internet through iPhone (bluetooth tether), so I followed one tutorial... It said I have to change "networkmanager" to "ifup" in yast>network settings, and make some other changes... I did it, but I couldn't connect via iphone... OK... I put back all changes, also changed ifpu to networkmanager.
After reboot, Knetowrkmanager gives me "network management disabled" on startup, instead of list of my networks.
Of course, I google for solution, but without any luck. And then, I don't know why, I killed Knetworkmanager, start it again, and.. it worked!
But now, I have to kill it, and start again always, when I reboot my laptop...(HP Compaq 6720s, BCM4312, KDE 4.3.4)
Ubuntu :: Virtual Network Device - Unable To Start Services
Jun 15, 2010Just upgraded fro 9.10 to 10.04, and went to start VMware player. It needed to load and compile some modules.
All of them got a nice green tick except the Virtual Network Device
Unable to start services. See log file /tmp/vmware-root/setup-2986.log for details.
I cant access that log file. Set the folder to read only, and any contents, but theres no file in there.
How do I solve this so I can run WMware?
OpenSUSE :: Create An Icon On The KDE4-desktop To Start A Program?
Dec 30, 2010how can I create an icon on the KDE4-desktop to start a program?
The program to start was not installed with YAST.
Fedora :: Schedule A Process To Start At A Specific Time (not On Start Up)?
Jan 19, 2010I'm trying to find how to schedule a process to start at a specific time (not on start up). How would I schedule a process/application to start at a specific time (if it matters, it will be a background process). For instance, have process abc start every weekday at 5am. I've done this for windows many times though have only been using linux regularly for a few months and haven't figured out the best way of doing this.
So far the best solution I have is to create a program that will start on boot and have it check the time and sleep until the required time and then start the required process(es) at the required time(s). But this seems more of a hack since I'd expect there to be a proper way of doing this.
OpenSUSE :: Pencil Won't Start \ Create Traditional Hand-drawn Animation?
Jan 9, 2010Pencil is an animation/drawing software for Mac OS X, Windows, and Linux.It lets you create traditional hand-drawn animation (cartoon) using both .I am getting this error :
anton@linux-sd6c:~> pencil
Object::connect: No such signal ToolSet::addClick()
Object::connect: No such signal ToolSet::rmClick()
[code]....
General :: Unable To Access From Windows Pc Shows Network Path Not Found Any Other Service To Start?
Dec 11, 2010i format and reinstall centos after that i create one sambha share and valid users restart smb service but i am unable to access it from windows pc shows network path not found any other service need to start
View 2 Replies View RelatedOpenSUSE Network :: Unable To Setup 10.3 As Samba PDC - The Network Path Was Not Found
Jun 1, 2009I am trying for the last many days to setup my opensuse 10.3 as Samba PDC Server according to the URL mentioned below, but in vain:How to setup SUSE 10.3 as Samba PDC - openSUSE When ever I try to join a Windows XP machine to the domain setup on Opensuse, I get the error:'The following error occured while attempting to join the domain. The network path was not found'. What could be the reason for this error despite of the fact the I am able to ping the FQDN of the PDC from the XP machine, but the XP machine simply denies to join the domain because of the above mentioned error.
View 7 Replies View RelatedOpenSUSE :: Gparted Is Unable To Create Anything More Than An Hfs Filesystem
Sep 12, 2009I'm running a modified version of OpenSUSE 11.1 from the susestudio builder. I've run across a weird issue whereby gparted is unable to create anything more than an hfs filesystem.
It seems that the package libparted simply doesn't exist in any of the repositories I'm using. I am figuring this would affect what gparted is able to do, although I'm unsure since the program itself runs fine.