Slackware :: --current - Hplip Won't Setup To Network Capable Multifunction Printer
Mar 14, 2011
I'm wondering if anyone else has this issue before I send a note off to Slackware on this.
The --current hplip package can't seem to actually complete the installation of a networked hp printer that has the printer physically plugged into the network.
The hplip app initially does detect the device, then I click next, then it says installation failed as it can't connect to the device.
Perhaps I'm doing something wrong.
I am however able to build, and run an older hplip that --current used a while back and it works splendid for adding a printer over the network.
I'm using version hplip-3.9.4b-i486-1 but I know that's not a big help to the project.
View 6 Replies
ADVERTISEMENT
Apr 12, 2010
I have a multifunction printer ricoh afico 550 but I can't install it with my ubuntu system everytime I try to install it, it installed as ricoh afico 220 and it's not printing but my windows pc can print easily. By the the printer in a networking printer.
View 1 Replies
View Related
Jul 31, 2010
I just installed opensuse 11.3 and was configuring the printer (via http) as usually using the HP Device Manager. But this time I got these error message:Printer queue setup failed. Please restart CUPS and try again
These lines were generated in the error-log of cups:
E [31/Jul/2010:23:30:35 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/drv/sample.drv"!
E [31/Jul/2010:23:30:35 +0200] [cups-driverd] Skipping "/usr/share/ppd": loop detected!
[code]....
View 9 Replies
View Related
Jul 18, 2010
I have an HP Photosmart USB printer that I configured with HPLIP (which seemingly "exports" into CUPS). All is well until the printer is turned off and then back on again sometime later: somebody, somewhere automagically adds the printer to CUPS so that I have two, count 'em, printers defined.
Code:
Some UDEV rule, some other thing?
View 3 Replies
View Related
Feb 15, 2010
Deskjet-F4400-series
--------------------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: usb://HP/Deskjet%20F4400%20series?serial=CN9C1CK70705C5
PPD: /etc/cups/ppd/Deskjet-F4400-series.ppd
[code]....
how do I get the printer installed in hplip? I can print but cannot scan. xsane will not recognize printer. Jaunty 64bit 2GB Ram 350GB HD
View 1 Replies
View Related
Oct 18, 2009
I just installed HPLIP using Synaptic package manager. One of the configure parameters (shown by 'hp-check -r') is
Code:
Am I correct in assuming that this means that a network printer will not work? Is there a way to override this while still using synaptic package manager? Would I then be able to use a network printer?
I have my eye on the HP photosmart plus B209A - and it looks like HPLIP supports it (there is a ppd file for it).
View 1 Replies
View Related
Jan 24, 2010
I'm trying to take my current windows7 (x64) setup and make it into a dual-boot setup with slackware 13.0 (x32) and am hitting a brickwall. I guess I would like to know if I can salvage the situation without formating my windows drive. I fully intend to, but I had hoped to not do it this month. I'd like to get dual boot going so I can master it and acquire all the files/drivers I'll want and then format and do it 100% right next time.
Currently I have windows setup on a 3x 500gb Raid0 onboard array which itself has been flawless. After I shrunk my current partition size to give me about 25gb of free space I proceeded to setup Linux, and I was unable to perform the cfdisk portion for partitioning the array for Linux.
I tried using cfdisk:
/dev/hdx (a1-a3,b1-b3)
/dev/sdx (a1-a3,b1-b3)
I even attempted to locate with: cat proc/partition and tried using cfdisk on every device it located. It always said it was either an unknown partition table and should I start at zero, or bad partition. I was of course too concerned over my windows setup (which has almost 1tb of stuff I have not backed up) to go any further into the unknown.
PS: I have used Slackware before, back at 8.1, 10, and even a very brief interlude at 12.0, this is my first attempt on this computer however with 13.0, it is currently running fine on my laptop and my PS3 (Laptop is even dual booting 7/Slack13. Albeit without raid)
Phenom 9850
M2N-SLI Deluxe (Nvidia AM2)
4x1gb of 1066 kingston hyperX
3x500gb WD Caviar Black Sata2 3.0
View 3 Replies
View Related
Nov 5, 2010
Which HP desk jet multifunction printer. Printer, scanner, copier, fax is compatible with Kubuntu?
View 1 Replies
View Related
Jan 14, 2011
I am looking for a HP Multifunction Printer that works well out of the box with Linux. I have been to the printer tables and seen the host of HP printers that work, but I would like to hear from someone who has recent experience.
View 2 Replies
View Related
Oct 19, 2010
I am trying to set uamsung clx2160N as a standalone network printer on my home network. It is a printer with standalone network capability and is connected directly to my router and has a static IP number. We have a few Windows computers at home and they had no problem detecting the printer, installing the drivers and working. Unfortunately my Ubuntu computer recognises the printer and I can even access it's setup and diagnositcs through its IP number. However when I try to add it as a printer, drivers for it cannot be located. #ve tried setting it up three ways:1. Using Samsung's own setup package - finds printer and all the details it needs to work but offers no drivers2. Using Ubuntu's printer setup - recognises printer but stalls at Searching for Drivers dialog3. Trying to *** printer using CUPS - no problem finding and recognising printer, but when I come to search for the driver I get Internal Server Error.
I have of course been trying to do all of these as root. That's the limit of my knowledge reached and searches on the net aren't helping me either. The printer works fine directly connected via USB, so the drivers are on the computer somewhere. How do I get them set up to use the printer on the network?
View 3 Replies
View Related
Sep 24, 2010
I am using Lucid 10.04 and don't plan to change until support is dropped. I am looking to buy a multifunction monochromatic laser printer.
I was considering Samsung SCX-4828FN or HP LaserJet M1522NF. Both have network cards and support for Linux, but I am a little leery of the Samsung's support in Lucid. Does anyone have this printer? It seems to me a better choice if it works, because the toner is quite a bit more economical and I print quite a a lot.
My only requirements are all-in-one scanner/printer, economical, network card, proven to work.
View 1 Replies
View Related
Aug 10, 2010
I recently installed Ubuntu 9.04 (Jaunty Jackalope) which I then promptly upgraded to 10.04 LTS (Lucid Lynx).
I have a canon pixma MX320 multifunction printer. I downloaded the printer/scanner drivers for linux (debian) from [URL]...asp and installed them with no problems.
The printer function works, as I managed to print a test page, but I was wondering if there was a way to test the scanner portion of my multifunction printer to make sure it works?
View 3 Replies
View Related
Jun 2, 2010
I have Canon MX860 Multifunction USB/Wireless printer that I am trying to add in Fedora 13. Looking under Desktop > Computer via USB connection, the printer is detected as some hardware device I can mount and unmount. However, when I am trying to add this printer via System > Administration > Printing, the printer is not detected at all nor can I add. FYI, this printer works fine in Ubuntu 10.04 LTS. How I can make this printer working in Fedora 13?
View 5 Replies
View Related
Jun 21, 2010
I installed Fedora 13 and can't install my multifunction printer CANON i-SENSYS MF4690PL.The scanner works fine (very odd) only printer not working.Is there a specific driver for this printer and if so, how to install this driver on Fedora 13? The MF4690PL and GNU/Linux I get this in terminal:
Code:
[root@Philip philip]# system-config-printer libnotify-Message: Unable to get session bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
(system-config-printer.py:2370): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
(system-config-printer.py:2370): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
(system-config-printer.py:2370): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.How do I now if the kernel has support for my printer ?
[Code]...
View 5 Replies
View Related
Feb 6, 2011
I have Ubuntu version 10.10 and I'm trying to install the HP DeskJet 1000 J110a printer. I have HPLIP version 3.11 (the latest version I believe). The printer shows up but when I try to print the error message reads: Printer requires the 'foomatic-rip-hplip' program but is not currently installed.
View 2 Replies
View Related
Dec 16, 2010
I successfully added/shared a network printer in SUSE 11.3 32 bit, but when I try on the 64 Bit box it didn't work out very well.What ports need to be open ? Is it necessary to open port 631 in YAST->Firewall->Advance- >UDP and IPP ?(TCP 631 already open) What services need to be running? Here is the error log :
[16/Dec/2010:19:25:43 -0500] [cups-polld xxx.xxx.xxx.xxx:631] CUPS-Get-Printers failed: Forbidden
XXX is my server IP
View 1 Replies
View Related
May 4, 2010
I only see two options in KDE. System settings which shows nothing relating to printing and Office Org printer administration.In the latter Office org printer admin shows "generic printer"..My printer is HP 5P. and I choose the option 5P/MP.Then next step asks me to: enter a command line for the appropriate device. I don't know what the appropriate command is. Can anyone help I leave it empty and click next. It shows the 5P/MP is now listed along with generic. I make it default and send a print command resulting in "error while printing".
View 3 Replies
View Related
Oct 15, 2009
I installed a LPT1 printer a hp office jet T65 to add this printer was requested hplip I install the software that should de printer driver, when I print a file the file remain only in processing it wont go forwarder then that.I hope I was explicitly enough.
View 3 Replies
View Related
Nov 4, 2009
I have Ubuntu 9.04, and a HP laserjet 1018 printer.
I install the printer using:
And when it ask me about plugin I give the path to it. (the 3.9.2 version of the plugin, because Ubuntu 9.04 has the 3.9.2 version of hplip)
well I install the printer, everything works perfectly. .... but, when I turn off the PC, and turn it on again, the printer does NOT work!, I send work for being printed but mothing happens , Ubuntu tells me that the job was printed but ... no case, my printer does not print it. I have to install it again since cero. what can I don to stop install it every time I turn off the computer ?
View 1 Replies
View Related
Jun 7, 2010
I would like to create a dedicated Samba print server. I have two printers on my LAN, one printer came with its own NIC and the other is on a Win server box. I would like to setup Samba so that I can just access that server (Samba printer server) and both network printers will show up on there for me to connect to. On that note, can I also load the drivers on my Samba server? Drivers for different Windows flavours and also Mac OSX drivers.
View 1 Replies
View Related
Jun 14, 2009
I did an upgrade using preupgrade program and it went very well. However, I have lost my HP 1020 printer. Can anyone assist with this. I tried to use HPLIP-Gui, but it doesn't even see the printer at all. The other problem is that I get the following message when trying to use Yumex:
Failure getting http://rpm.livna.org/fedora/11/i386/...ta/repomd.xml:
13:09:06 : --> [Errno 14] HTTP Error 404: Not Found
13:09:06 : Trying other mirror.
13:09:06 : Failure getting http://livna.cat.pdx.edu/fedora/11/i...ta/repomd.xml:
[Code].....
View 11 Replies
View Related
Feb 10, 2010
Everytime I get HPLip working with my printer, it will only work until I shutdown the computer. On next restart, it no longer works and the only way to get it to work again is to delete the printer configs in hplip and re-create them!
View 2 Replies
View Related
Nov 15, 2010
Trouble with cups - Opensuse 11.3 x86-64
Hplip installed
prrinter = HP photosmart 4280
No way I can set the printer as default printer in cups as in 11.2. Now hp-device-manager. Part of hplip is complaining "set the default printer"
View 2 Replies
View Related
Apr 30, 2011
When I try to change some settings of my printer using HPLIP it tells me to add myself to the lp an sys group. Is that safe ? What are those groups used for ?
View 9 Replies
View Related
Jan 27, 2011
I'm running Ubuntu 9.10. The Update Manager did an update to HPLIP, the Hewlett Packard Linux Internet Printing software, one or two days ago. When I went to print today, the HP Officejet 4500 printer showed up in Open Office when my mouse pointed to the printer icon. But, the printer wouldn't work. Then I noticed that the HPLIP Toolbox icon was moved from the Applications - Accessoires folder, to the System - Preferences folder. I reinstalled all the HPLIP software, using the Synaptic Package Manager. When I click on the HPLIP Toolbox & run the HP Device Manager, it says "No Installed HP Devices Found".I was a little surprised to see the software upgrade caused the HPLIP toolbox to move fromhe Applications folder to the System folder. Because of this, I suspect there may be a bug in the upgraded software? Is anyone else having this problem?
View 1 Replies
View Related
Apr 11, 2010
I have two Linux machines both running Debian (I do not want Windows to be involved at all). One is a desktop and one is a laptop. I desire to connect a not-yet-purchased printer/scanner combination machine only to the internal LAN via my router (Linksys WRT54G) via Ethernet cable, or via wireless if the printer/scanner has that capability. I want to be able to print to that printer (and scan from its scanner) by only having to turn on the printer/scanner and only one of the other computers, and not have to have both Linux machines turned on in order to print and/or scan.
So my questions are:
When I look at specific models of printers, what should I be looking for in their specifications that indicates that this configuration is possible (i.e., should I be looking exclusively for printers that say they are "wireless printers" or "network printers")?The reason I ask this question: In my online searching, I thought "networked printer" or "stand-alone network printer" meant just that, but what I found instead are pages and pages of instructions on how to connect the printer locally to a Linux machine, with the associated setup to allow that Linux machine to serve print requests coming from other machines on the LAN. And that approach is not what I want to do (with the notable exception of temporary setup to validate that the printer is responding to requests for printing and scanning from Linux).
Are there particular brands, makes, or models that I would have better luck in getting to work in this manner (i.e., "better stick with HP or Xerox")? Am I kidding myself that a combination printer/scanner would work in the same fashion and still be relatively easy to set up on both Linux machines without resorting to some Windows-centric approach? Result of my searching so far (I have not worked my way through all of these in detail, but plan to): References to local printer connection which is not what I want:
Setting_Up_a_Network_Printer_using_CUPS
Set up a network printer using cups
Set up a printer
The post inside Setting_Up_a_Network_Printer_using_CUPS that starts with "running an HP Photosmart 8450 as a stand-alone networked printer" (where is the permalink?) is as close as I could get, but I am concerned that the instructions given are specific to the HP Photosmart 8450, or specific to the HP vendor, versus for all printers that can be connected to an Ethernet network (not that being locked into HP is going to be a problem necessarily, but I would like to know why if that is the case). Linux compatible printers says "Have a look at LinuxPrinting for known working drivers for printers data base. Also buy from a linux friendly company, ie HP, Brother, Epsom." Later in that thread, someone said Definitely don't buy canon.
View 2 Replies
View Related
Jun 19, 2010
I do not have the hardware to do this yet. I simply want advice on what route to take before I make the investment. If I had the money I would simply invest in a wireless combo setup, but I unfortunately do not. I do however have an idea. I am currently stuck with a standalone system that is running XP strictly for the use of magicjack. I was thinking I could hook up this combo machine to that computer and network it in via that. However, would the scanning capability only reside in the hardwired computer or could I do a network scan somehow?
View 2 Replies
View Related
Apr 20, 2010
I just built a system and put a fresh install of ubuntu 9.10 on it. I have two other systems with 9.10 as well. On both of them the printer (an HP Officejet Pro 7680 set up directly on the network) is shown as an HPLIP printer with a URI that starts with hp:/net/ . When trying to set up this printer on the new machine the option for HPLIP is not present and the URI starts with dnssd://. I can only set up as and LPD Network Printer or an Appsocket/JetDirect network printer. Yes I have the hplip stuff installed on the new machine. My main concern is actually using the scanner function with Xsane. The other two machines scan just fine, the new one can't find any devices. I think this must be connected with the lack of HPLIP functions. This is with the AMD64 bit version of 9.10
View 1 Replies
View Related
Mar 9, 2011
I plan on changing brands in printer from HP to Brother in the near future. Will I need to completely remove HPLIP before installing Brother printer software pkg on Ubuntu 10.04?
View 6 Replies
View Related
May 25, 2009
I have an HP printer - C4200 series; Works fine in Slackware.
I am trying to get it to work in mepis-8.
Last thing done: hplip and cups were both un-installed and re-installed with no errors
When I try to install the printer hplip raises the error:
Quote:
printer queue setup failed. Please restart cups and try again.
This was done more that once; the last time after removing and reinstalling both cups and hplip.
I tried to install the printer using cups and get the error:
Quote:
View 5 Replies
View Related
