Software :: Install The Printer Hplip Raises The Error ?
May 25, 2009
I have an HP printer - C4200 series; Works fine in Slackware.
I am trying to get it to work in mepis-8.
Last thing done: hplip and cups were both un-installed and re-installed with no errors
When I try to install the printer hplip raises the error:
Quote:
printer queue setup failed. Please restart cups and try again.
This was done more that once; the last time after removing and reinstalling both cups and hplip.
I tried to install the printer using cups and get the error:
Quote:
View 5 Replies
ADVERTISEMENT
Feb 6, 2011
I have Ubuntu version 10.10 and I'm trying to install the HP DeskJet 1000 J110a printer. I have HPLIP version 3.11 (the latest version I believe). The printer shows up but when I try to print the error message reads: Printer requires the 'foomatic-rip-hplip' program but is not currently installed.
View 2 Replies
View Related
Feb 15, 2010
Deskjet-F4400-series
--------------------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: usb://HP/Deskjet%20F4400%20series?serial=CN9C1CK70705C5
PPD: /etc/cups/ppd/Deskjet-F4400-series.ppd
[code]....
how do I get the printer installed in hplip? I can print but cannot scan. xsane will not recognize printer. Jaunty 64bit 2GB Ram 350GB HD
View 1 Replies
View Related
Jun 11, 2011
I have ubuntu jaunty 9.04 installed in my system(thats my only OS.. no dual boot). When I tried to install hplip to enable hp printer driver, I understood that 9.04 is obsolete and no more support for it. I want to upgrade now. Update manager shows '10.04' for uogradation but it seems I cannot jump from 9.04 to 10.04 without getting into 9.10.
View 2 Replies
View Related
Oct 15, 2009
I installed a LPT1 printer a hp office jet T65 to add this printer was requested hplip I install the software that should de printer driver, when I print a file the file remain only in processing it wont go forwarder then that.I hope I was explicitly enough.
View 3 Replies
View Related
Nov 4, 2009
I have Ubuntu 9.04, and a HP laserjet 1018 printer.
I install the printer using:
And when it ask me about plugin I give the path to it. (the 3.9.2 version of the plugin, because Ubuntu 9.04 has the 3.9.2 version of hplip)
well I install the printer, everything works perfectly. .... but, when I turn off the PC, and turn it on again, the printer does NOT work!, I send work for being printed but mothing happens , Ubuntu tells me that the job was printed but ... no case, my printer does not print it. I have to install it again since cero. what can I don to stop install it every time I turn off the computer ?
View 1 Replies
View Related
Jun 14, 2009
I did an upgrade using preupgrade program and it went very well. However, I have lost my HP 1020 printer. Can anyone assist with this. I tried to use HPLIP-Gui, but it doesn't even see the printer at all. The other problem is that I get the following message when trying to use Yumex:
Failure getting http://rpm.livna.org/fedora/11/i386/...ta/repomd.xml:
13:09:06 : --> [Errno 14] HTTP Error 404: Not Found
13:09:06 : Trying other mirror.
13:09:06 : Failure getting http://livna.cat.pdx.edu/fedora/11/i...ta/repomd.xml:
[Code].....
View 11 Replies
View Related
Feb 10, 2010
Everytime I get HPLip working with my printer, it will only work until I shutdown the computer. On next restart, it no longer works and the only way to get it to work again is to delete the printer configs in hplip and re-create them!
View 2 Replies
View Related
Nov 15, 2010
Trouble with cups - Opensuse 11.3 x86-64
Hplip installed
prrinter = HP photosmart 4280
No way I can set the printer as default printer in cups as in 11.2. Now hp-device-manager. Part of hplip is complaining "set the default printer"
View 2 Replies
View Related
Apr 30, 2011
When I try to change some settings of my printer using HPLIP it tells me to add myself to the lp an sys group. Is that safe ? What are those groups used for ?
View 9 Replies
View Related
Jan 27, 2011
I'm running Ubuntu 9.10. The Update Manager did an update to HPLIP, the Hewlett Packard Linux Internet Printing software, one or two days ago. When I went to print today, the HP Officejet 4500 printer showed up in Open Office when my mouse pointed to the printer icon. But, the printer wouldn't work. Then I noticed that the HPLIP Toolbox icon was moved from the Applications - Accessoires folder, to the System - Preferences folder. I reinstalled all the HPLIP software, using the Synaptic Package Manager. When I click on the HPLIP Toolbox & run the HP Device Manager, it says "No Installed HP Devices Found".I was a little surprised to see the software upgrade caused the HPLIP toolbox to move fromhe Applications folder to the System folder. Because of this, I suspect there may be a bug in the upgraded software? Is anyone else having this problem?
View 1 Replies
View Related
Apr 20, 2010
I just built a system and put a fresh install of ubuntu 9.10 on it. I have two other systems with 9.10 as well. On both of them the printer (an HP Officejet Pro 7680 set up directly on the network) is shown as an HPLIP printer with a URI that starts with hp:/net/ . When trying to set up this printer on the new machine the option for HPLIP is not present and the URI starts with dnssd://. I can only set up as and LPD Network Printer or an Appsocket/JetDirect network printer. Yes I have the hplip stuff installed on the new machine. My main concern is actually using the scanner function with Xsane. The other two machines scan just fine, the new one can't find any devices. I think this must be connected with the lack of HPLIP functions. This is with the AMD64 bit version of 9.10
View 1 Replies
View Related
Mar 9, 2011
I plan on changing brands in printer from HP to Brother in the near future. Will I need to completely remove HPLIP before installing Brother printer software pkg on Ubuntu 10.04?
View 6 Replies
View Related
Oct 18, 2009
I just installed HPLIP using Synaptic package manager. One of the configure parameters (shown by 'hp-check -r') is
Code:
Am I correct in assuming that this means that a network printer will not work? Is there a way to override this while still using synaptic package manager? Would I then be able to use a network printer?
I have my eye on the HP photosmart plus B209A - and it looks like HPLIP supports it (there is a ppd file for it).
View 1 Replies
View Related
Jul 18, 2010
I have an HP Photosmart USB printer that I configured with HPLIP (which seemingly "exports" into CUPS). All is well until the printer is turned off and then back on again sometime later: somebody, somewhere automagically adds the printer to CUPS so that I have two, count 'em, printers defined.
Code:
Some UDEV rule, some other thing?
View 3 Replies
View Related
Aug 5, 2010
I have recently installed Fedora 13 on my netbook. I wish to use my HP Officejet via the HPLIP utility. The problem with this is that when I have the firewall turned on, the printer is not recognised at all during setup. When the firewall is switched off, the printer is recognised. The printer in question is an HP Officejet 8500a which is connected via Ethernet cable to a wireless router. I would like to know if there are any network ports (that's used by HPLIP) that I could 'turn on' in the firewall that could let my computer recognise the printer.
[Code]....
View 5 Replies
View Related
Dec 5, 2009
after an update to 11.2 (from 11.1), 64 bit, I don't get the printer to work. I reinstalled the driver and checked in cups: it says that the printer is available and waiting for a job. When I send something to the printer, nothing happens. The priont job will be stopped immediately. The printer is properly connected: xsane finds the scanner, that is part of the printer, without a problem. The printer is also ok: I can copy documents, it just works fine.
[Code]...
View 9 Replies
View Related
Jul 31, 2010
I just installed opensuse 11.3 and was configuring the printer (via http) as usually using the HP Device Manager. But this time I got these error message:Printer queue setup failed. Please restart CUPS and try again
These lines were generated in the error-log of cups:
E [31/Jul/2010:23:30:35 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/drv/sample.drv"!
E [31/Jul/2010:23:30:35 +0200] [cups-driverd] Skipping "/usr/share/ppd": loop detected!
[code]....
View 9 Replies
View Related
Mar 14, 2011
I'm wondering if anyone else has this issue before I send a note off to Slackware on this.
The --current hplip package can't seem to actually complete the installation of a networked hp printer that has the printer physically plugged into the network.
The hplip app initially does detect the device, then I click next, then it says installation failed as it can't connect to the device.
Perhaps I'm doing something wrong.
I am however able to build, and run an older hplip that --current used a while back and it works splendid for adding a printer over the network.
I'm using version hplip-3.9.4b-i486-1 but I know that's not a big help to the project.
View 6 Replies
View Related
Apr 22, 2010
I recently had problems with my HP printer in Fedora 12, where as I never had a problem with it in any other distrubution.... For some reason, the HPLIP driver in the repo doesn't work correctly... I don't know why... but I kept getting errors with "error: Printer queue setup failed. Please restart CUPS and try again."
I tried every suggestion I found... which was installing extra dependencies, disabling firewall, disabling SELinux and a whole bunch of other stuff... but nothing worked... THEN finally I decided to use the HPLIP driver from the HP website... it was a .run file... and I executed it, and my printer has worked perfect eversince..... my question is.... has anybody successfully installed their hp printer from the hplip driver in the repo's..??? I don't know why it didn't work for me, and i've seen other fedora users complain of the same thing? maybe theres something wrong with the package? or its not pulling in a needed dependency? I don't know...
View 2 Replies
View Related
Nov 4, 2009
I have Ubuntu 9.04, and a HP laserjet 1018 printer.
I install the printer using:
And when it ask me about plugin I give the path to it. (the 3.9.2 version of the plugin, because Ubuntu 9.04 has the 3.9.2 version of hplip)
well I install the printer, everything works perfectly.....but, when I turn off the PC, and turn it on again, the printer does NOT work!, I send work for being printed but mothing happens , Ubuntu tells me that the job was printed but ... no case, my printer does not print it.
I have to install it again since cero. what can I don to stop install it every time I turn off the computer ?
View 1 Replies
View Related
Jan 19, 2010
Each time I was playing video on a web browser, I got the cpu temperature growing to 85 and 91 degrees...
I thought that it's caused by the browser, until I played Machinarium (the flash game without browser) I realized that only Adobe flash is the problem. I have the last Adobe flash update/ using fc12.
View 10 Replies
View Related
Jul 16, 2009
Debian/Lenny: HPLIP installed fine from debian repositories; But when starting hp-toolbox, I get the error:
Code:
error: Unable to communicate with device (code=12): hp:/usb/Photosmart_C4200_series?serial=MY71TCQ11504VP
warning: Device not found
When logged in as root, all is well; logged in as user, above error occurs
View 6 Replies
View Related
Apr 4, 2011
I have now two computers running Fedora 14 64 bit. The previous installation was a couple years ago and i have had no problem getting HPLIP installed - at least not a lot of trouble. This time, however, the install disk has installed the latest version but without a number of its dependencies. The .run shell only tells me that it can't install this or that dependency, in this case sane-backends-devel. When I use the command su -c "yum -d 10 -e 1 install sane-backends-devel" the dependencies are located and the debugger starts. The install proceeds until the more recent libtif 64 bit file is found already on my computer but the desired but older 32 bit version has been set up for install. This stops the business with an error. I have struggled with this until my backend is no longer sane.
I am not sure where to go from here. It looks to me as though the sane-backends-devel dependencies will always prevent an install. Is there a command I could insert to prevent this from happening - such as eliminating the d 10 switch or otherwise? Is there a way to skip one error and go on, for instance? I have not always used the shell to install, and there are several other methods out there, but without this dependency I will not be able to scan, which is what I have to do.
View 12 Replies
View Related
Jul 19, 2010
I am planning on purchasing a new printer, HP 8500 all in one. I downloaded hplip.net. it is listed in the downloads. Now how do I install hplip? I want to ready for the new printer. Chef Robert Here in the Land Of Enchantment.
View 3 Replies
View Related
Dec 20, 2010
I have been having the issue with my printer, where it will not print using both cartridges, and just mixes the colours to try and make black....I have found the following patch, but would like to know how to apply it?
[URL]
View 6 Replies
View Related
Apr 9, 2011
Installing support for Phototsmart 7150 on Ubuntu 10.10 server (no desktop).Installed 3.10.6 and 3.11.3a.
Installation hangs at the point where the printer is supposed to be detected (after the prompt to restart).At that point I break out with Ctrl-C.I then run hp-setup and select usb. That process complains about missing dbus file but prompts for the printing of a test page. The job begins but only a few lines are printed before the page is ejected, some more lines print, the page is ejected and so on.Have tried to uninstall with make uninstall but since there's no desktop I suppose the hp files are in the home folder?Please inform of proper uninstall for my case.I have also installed hplip via the webmin config. That install proceeds smoothly with no errors but print result is same.
View 4 Replies
View Related
Nov 9, 2010
How can i install foomatic-rip-hplip in Mandriva?
View 10 Replies
View Related
Mar 24, 2009
How to install software file hplip.run ?
View 4 Replies
View Related
Nov 30, 2009
In short, attached a terminal screenshot of me trying to install hplip. Why hplip-3.9.10.run doesn't recognize the fact that gcc has already been installed? In detail: I have HP PSC 1210 connected to a Windoze XP machine. I want to enable network printing, but the only printer showing up standard in the F12 drivers is the HP PSC 1200. When I use that one, I reach the printer, and the Windoze printer queue, but no matter how long I wait, nothing ever comes out of the printer. It'll start moving like "I'm about to print!" but then does nothing. So through the hp-opensource website I determined which driver I want, and get a long way into installing the file. It hangs up on the attached screenshot.
View 12 Replies
View Related
