I just installed HPLIP using Synaptic package manager. One of the configure parameters (shown by 'hp-check -r') is
Code:
Am I correct in assuming that this means that a network printer will not work? Is there a way to override this while still using synaptic package manager? Would I then be able to use a network printer?
I have my eye on the HP photosmart plus B209A - and it looks like HPLIP supports it (there is a ppd file for it).
Deskjet-F4400-series -------------------- Type: Unknown Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend. Device URI: usb://HP/Deskjet%20F4400%20series?serial=CN9C1CK70705C5 PPD: /etc/cups/ppd/Deskjet-F4400-series.ppd
[code]....
how do I get the printer installed in hplip? I can print but cannot scan. xsane will not recognize printer. Jaunty 64bit 2GB Ram 350GB HD
I'm wondering if anyone else has this issue before I send a note off to Slackware on this.
The --current hplip package can't seem to actually complete the installation of a networked hp printer that has the printer physically plugged into the network.
The hplip app initially does detect the device, then I click next, then it says installation failed as it can't connect to the device.
Perhaps I'm doing something wrong.
I am however able to build, and run an older hplip that --current used a while back and it works splendid for adding a printer over the network.
I'm using version hplip-3.9.4b-i486-1 but I know that's not a big help to the project.
I have Ubuntu version 10.10 and I'm trying to install the HP DeskJet 1000 J110a printer. I have HPLIP version 3.11 (the latest version I believe). The printer shows up but when I try to print the error message reads: Printer requires the 'foomatic-rip-hplip' program but is not currently installed.
I'm having a devil of a time trying to set up printing with 3 network printers: an HP Laserjet P4014n, an HP Laserjet 5200tn, and an HP Officejet Pro 8500 a909a. The three printers are connected directly to the office intranet and have their own ip addresses. The system I'm trying to configure is running Wheezy, and HPLIP and Cups are both installed. I have confirmed (from [URL] ....) that all printers are supported.
First, running "hp-setup -i" (hplip-gui is not installed -- I do not wish to pull in half of KDE simply to configure printing), the program only finds the 2 laserjets. Adding one of them creates a printer in CUPS with an "hp:/net/<printer name>" connection. Attempting to printing a test page through CUPS fails with message "/usr/lib/cups/backend/hp failed".
Interestingly enough, running "hp-probe -bnet" finds all three printers. However, running "hp-makeuri" with each printer's ip address fails with "error: Device not found". Hmmm, so HPLIP can apparently go from seeing everything to seeing nothing. Very useful.
Moving to the CUPs browser interface, clicking "Find New Printers" under the "Administration" tab also only shows the 2 laserjets, although each is listed three times(!). The only difference that I can see among the three versions of each printer is in the connection uri:
Adding any one of them seems to work, although I do not understand why there are three of them (presumably different protocols, though what they are and the differences between them are, I don't know).
Logging into the officejet control panel and browsing at its network configuration, I see mDNS, SNMP, and WINS are disabled, although SLP is enabled. Looking in '/etc/cups/cupsd.conf', I see 'BrowseLocalProtocols' is set to only CUPS and DNSSD, so I add SLP and restart CUPS. No change; the officejet still doesn't show. I go back into the officejet control panel and enable mDNS (which, if I understand correctly, is essentially the same as DNSSD). Nothing; the officejet still doesn't show.
I just upgraded to lenny (stable) from a working etch system. It went pretty nicely but I'm having a problem with the print system.
Ok, I have an HP Laserjet 4M+ connected to my system by USB. (I have another color printer too and a scanner but I don't use them often).
I use CUPS. I never bothered with the HPLIP packages because straight cups has always worked well.
What happens now is that I'll send a job to the printer and nothing will happen. The printer won't get it. Looking at CUPS on the localhost:631 page I can see that the printer is on, connected, ready; the job is there too but just stuck on "processing".
Now here's the thing. If I manually load the ehci_hcd module with "modprobe ehci_hcd" then the job will make it to the printer and it will print.
I can't just make that module load at boot time because if I do and the printer is off, it doesn't work. (I have to unload it and reload it). For whatever reason, I have to make sure that module gets loaded AFTER the printer is turned on, or nothing gets sent to the printer!
I just upgraded from Debian Etch to Debian Lenny (stable) and now I am having a tough time getting my printer to work. I have a LaserJet connected to the system with a parallel to USB cable.What happens is that when I go to print, nothing happens, CUPS says the printer is processing, and the job just sits there. If I load the ehci_hcd module, then the printer is fine.But it's not as easy as setting it up so that ehci_hcd is autoloaded at boot, because if that happens then when I turn on the printer I have the same problem. I have to actually unload ehci_hcd and then reload it!
I installed a LPT1 printer a hp office jet T65 to add this printer was requested hplip I install the software that should de printer driver, when I print a file the file remain only in processing it wont go forwarder then that.I hope I was explicitly enough.
I have Ubuntu 9.04, and a HP laserjet 1018 printer.
I install the printer using:
And when it ask me about plugin I give the path to it. (the 3.9.2 version of the plugin, because Ubuntu 9.04 has the 3.9.2 version of hplip)
well I install the printer, everything works perfectly. .... but, when I turn off the PC, and turn it on again, the printer does NOT work!, I send work for being printed but mothing happens , Ubuntu tells me that the job was printed but ... no case, my printer does not print it. I have to install it again since cero. what can I don to stop install it every time I turn off the computer ?
I did an upgrade using preupgrade program and it went very well. However, I have lost my HP 1020 printer. Can anyone assist with this. I tried to use HPLIP-Gui, but it doesn't even see the printer at all. The other problem is that I get the following message when trying to use Yumex:
Failure getting http://rpm.livna.org/fedora/11/i386/...ta/repomd.xml: 13:09:06 : --> [Errno 14] HTTP Error 404: Not Found 13:09:06 : Trying other mirror. 13:09:06 : Failure getting http://livna.cat.pdx.edu/fedora/11/i...ta/repomd.xml:
Everytime I get HPLip working with my printer, it will only work until I shutdown the computer. On next restart, it no longer works and the only way to get it to work again is to delete the printer configs in hplip and re-create them!
Trouble with cups - Opensuse 11.3 x86-64 Hplip installed prrinter = HP photosmart 4280 No way I can set the printer as default printer in cups as in 11.2. Now hp-device-manager. Part of hplip is complaining "set the default printer"
When I try to change some settings of my printer using HPLIP it tells me to add myself to the lp an sys group. Is that safe ? What are those groups used for ?
I'm running Ubuntu 9.10. The Update Manager did an update to HPLIP, the Hewlett Packard Linux Internet Printing software, one or two days ago. When I went to print today, the HP Officejet 4500 printer showed up in Open Office when my mouse pointed to the printer icon. But, the printer wouldn't work. Then I noticed that the HPLIP Toolbox icon was moved from the Applications - Accessoires folder, to the System - Preferences folder. I reinstalled all the HPLIP software, using the Synaptic Package Manager. When I click on the HPLIP Toolbox & run the HP Device Manager, it says "No Installed HP Devices Found".I was a little surprised to see the software upgrade caused the HPLIP toolbox to move fromhe Applications folder to the System folder. Because of this, I suspect there may be a bug in the upgraded software? Is anyone else having this problem?
I just built a system and put a fresh install of ubuntu 9.10 on it. I have two other systems with 9.10 as well. On both of them the printer (an HP Officejet Pro 7680 set up directly on the network) is shown as an HPLIP printer with a URI that starts with hp:/net/ . When trying to set up this printer on the new machine the option for HPLIP is not present and the URI starts with dnssd://. I can only set up as and LPD Network Printer or an Appsocket/JetDirect network printer. Yes I have the hplip stuff installed on the new machine. My main concern is actually using the scanner function with Xsane. The other two machines scan just fine, the new one can't find any devices. I think this must be connected with the lack of HPLIP functions. This is with the AMD64 bit version of 9.10
I plan on changing brands in printer from HP to Brother in the near future. Will I need to completely remove HPLIP before installing Brother printer software pkg on Ubuntu 10.04?
I have an HP Photosmart USB printer that I configured with HPLIP (which seemingly "exports" into CUPS). All is well until the printer is turned off and then back on again sometime later: somebody, somewhere automagically adds the printer to CUPS so that I have two, count 'em, printers defined.
I have recently installed Fedora 13 on my netbook. I wish to use my HP Officejet via the HPLIP utility. The problem with this is that when I have the firewall turned on, the printer is not recognised at all during setup. When the firewall is switched off, the printer is recognised. The printer in question is an HP Officejet 8500a which is connected via Ethernet cable to a wireless router. I would like to know if there are any network ports (that's used by HPLIP) that I could 'turn on' in the firewall that could let my computer recognise the printer.
after an update to 11.2 (from 11.1), 64 bit, I don't get the printer to work. I reinstalled the driver and checked in cups: it says that the printer is available and waiting for a job. When I send something to the printer, nothing happens. The priont job will be stopped immediately. The printer is properly connected: xsane finds the scanner, that is part of the printer, without a problem. The printer is also ok: I can copy documents, it just works fine.
I just installed opensuse 11.3 and was configuring the printer (via http) as usually using the HP Device Manager. But this time I got these error message:Printer queue setup failed. Please restart CUPS and try again
These lines were generated in the error-log of cups: E [31/Jul/2010:23:30:35 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/drv/sample.drv"! E [31/Jul/2010:23:30:35 +0200] [cups-driverd] Skipping "/usr/share/ppd": loop detected!
I recently had problems with my HP printer in Fedora 12, where as I never had a problem with it in any other distrubution.... For some reason, the HPLIP driver in the repo doesn't work correctly... I don't know why... but I kept getting errors with "error: Printer queue setup failed. Please restart CUPS and try again."
I tried every suggestion I found... which was installing extra dependencies, disabling firewall, disabling SELinux and a whole bunch of other stuff... but nothing worked... THEN finally I decided to use the HPLIP driver from the HP website... it was a .run file... and I executed it, and my printer has worked perfect eversince..... my question is.... has anybody successfully installed their hp printer from the hplip driver in the repo's..??? I don't know why it didn't work for me, and i've seen other fedora users complain of the same thing? maybe theres something wrong with the package? or its not pulling in a needed dependency? I don't know...
I have ubuntu jaunty 9.04 installed in my system(thats my only OS.. no dual boot). When I tried to install hplip to enable hp printer driver, I understood that 9.04 is obsolete and no more support for it. I want to upgrade now. Update manager shows '10.04' for uogradation but it seems I cannot jump from 9.04 to 10.04 without getting into 9.10.
My ethernet works like on demand. The Network allways goes off, when i do not use it for 5 or 10 miutes. When i want to use it again, then i must always the following ping commands ( ping localhost, ping [any domain]), after that i can use the Internet again.
- Why my lenny is working like on demand? - Does give any network changes with debian lenny?
Total Newb here, sorry. I am pseudo-IT at work and have set up a desktop with Debian 5 (accidentally overwrote Windows in the process, but there you go). We are set up with network printers here (all Windows), and I was wondering how to go about being able to print to one of the network printers from my Linux desktop. Can I even connect to the Windows network with this desktop (it is hooked up)? Understand, I do NOT want to screw up anything on the network - they won't let me play anymore if I do. If I download the Linux driver, what do I do next?
I work at a public library, and am relatively new to Debian. Our OPACs (Online Public Access Catalogs) are running Debian Lenny. They are locked down to loading and visiting one specific webpage through a combination of Kiosktool and in the Opera browser.Initially, I had one machine set up with a static IP address, which worked just fine. Each machine has its own static IP which is translated at our Cisco ASA 5505 firewall to individual, physical IP addresses on the outside. However, I had many more machines that I wanted to clone from the working system.On the cloned machines, the physical network card in the machine shows up in ifconfig eth1, because it is "remembering" the eth0 network card from the master machine that it was cloned off ofNo problem, I thought, I will just change interfaces to the following:
I have always used apt-get to update the system. Yesterday, I was doing some tests and one of them was to try to update the system using the aptitude command, instead. I ran aptitude update and then aptitude safe-ugrade. I thought that wouldn't be a problem, but I was wrong. This morning I found the computer just can't boot.
I get this message:
I have Squeeze in another partition on that computer. I can access the system through the terminal (the graphic is screwed). Is it possible to try my Lenny from this partition? If not, I also have a live cd for Squeeze. Right now I'm on another computer.
