OpenSUSE Wireless :: Create A Virtual WiFi And Share Internet Access With Many Others?
Dec 25, 2009
There is a new feature in Windows 7 that make u able to create a virtual WiFi and share ur internet access with many others.
I know there is ad-hoc but sometimes it has problems, for example I couldn't connect to my friend's ad-hoc network (he is using Windows 7) but I _could_ connect to the virtual WiFi he created, it appeared just like any other wireless network unlike ad-hoc
so is there any way to create a virtual WiFi and not ad-hoc in Linux?
I just installed SUSE 11.4. In short - my adapter is working, authenticated on the selected AP, I can ping the AP, but I have no access to the outside world. Here's the command line output:
I started using Arch just a few days ago. forward traffic to the Wireless access point I created on arch. i am using cable internet (ppp0) which I want to share via a usb wifi adapter running as a WAP. I followed the instructions in this link to enable the AP mode. Afterwards I followed the instructions provided in the Arch Wiki to forward the traffic but because of my inexperience I am still unable to connect to the internet. Here is the output of iptables -nvL :
Code:
Chain INPUT (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 77 31312 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID
I have 2 laptop with opensuse 11.2. One of them is connected to the Internet through a Mobile Connection with a CDMA/EDVO modem on the usb port. I want to share the Internet connection with the other laptop through the WiFi interface of each of them. How should I proceed?
Where can I find set up information in order to share internet between my Ipod touch and my laptop? Laptop is connected to cable modem and has wifi interface (so no wireless router).
I use openSUSE 11.1 since quite a bit and I frequently use YAST (not as root of course). However, since the problems I have to deal with while trying to install WiFi internet access I meet the following problem. I call YAST, get the small authentication screen, I give the right password, which seems to be recognized as such, but I never see YAST appearing. So I can't manage neither my hardware, nor my software.
I've installed new drivers and when I go to connect the MAC address shows up on the router but only for a few seconds and then disappears and I can't access wifi. I've even attempted opening up the router and still can't connect.
I am super new to linux. I have tried a lot of distros but went with OpenSUSE11.3. I have both gnome and kde live cd. Now to the problem, When I put in the live cd and boot - the computer finds the wireless card and lets me connect to the internet. This works on both versions. But after clicking on the install icon the wireless no longer starts and then I cant get it to work. Maybe its something I should be doing. After all I am new to this.
I'm having trouble setting up my desktop pc to access the internet via my wireless router. i have tried to set it up in networkmanager (it shows as connected when clicking on the NM icon) but when loading firefox or when trying to update opensuse i just cannot get a connection.
I have Samba shares on a Red Hat server vmware virtual machine. We just upgraded our vmware tools and vmware hardware to vsphere and now I can't authenticate to the samba shares. It prompts for credentials, but it won't take the login. Has anyone seen this or have any idea how to fix this?
Is this possible? and if so how? Basically the PC in my sig connects to the Internet through a Wireless Adapter..etc. I have another tower PC, running Ubuntu that sits next to it - doing nothing and has no internet connection. (My son uses it to play tux paint etc). I would love to be able to connect the Tower PC to My PC via an ethernet cable? and share the Wireless Connection on my PC?
My computer running Ubuntu 10.04 (latest) is connected to the internet via an ethernet cable. I would like other devices to connect to the internet by sharing its connection via wifi. Is there a guide to do this? I haven't been able to find one which works out of the box.
I tryed to get network work like this share internet from wifi (wlan0) to ethernet (eth0).So the internet connection comes from the wifi and we share to other computer via ethernet[URL]But when I restarted my pc then it dont work and network says "wired network device not managed" How can I get it work aigan ?[URL]Now I have anohter problem when I connect autoeth then the wireless network dosent work anymore, I have to disconnect eth0 to have wirelles network working. how can I manage to get the bowh to work?
I'm trying to setup a wireless AP with my old asus eeepc, so it can act as a repeater to connect my android device on the other end of the apartment. I've already created the Wireless Access Point using hostapd. It took very little configuring, just changed from mode 'a' to 'g' and changed the channel from 60 to 1 and It was all set. Next I setup a dhcp server. Also simple enough using yast.
Up to this point, I was able to connect my android device to the newly created wireless network. However It doesn't have internet access. I guess I have to configure iptables for this, but I find it incredibly confusing! Here are a few specs to help with any examples: The laptop is connected to the internet through eth0 with IP 192.168.2.120 Hostapd is using wlan0, and I'm pretty sure it created mon.wlan0 So, to sum up, when I connect my android device to the network I can, for instance, see what ever pages apache is currently serving on the laptop, but can't access the internet.
I want to share my internet connexion via ad-hoc WiFi. If it's unsecured, it works fine, but when I use WPA encryption, it doesn't work anymore! I can connect from my iPod touch, but no internet. I connect to the internet from my laptop, via eth0 I want to share my internet connection via wlan0 I have no idea what's wrong
Just today I installed opensuse 11.3 on my Compaq CQ61. Even though I am able to connect to networks (both with an ethernet cable and wireless) I don't have internet access. I have used opensuse for a very brief period in the past and I had no such problem.
I've been reading around, but not had much success at all in trying to share the internet connection from my laptop to my phone.all the articles i read refer to earlier versions of Ubuntu and the packages they mention have become obsolete, according to the apt-get tool.im not that new to Linux, but my networking probably isn't up to scratch.if anyone could help me, that would be great, im using Ubuntu 10.04 at the time of writing.
I have a Dell Studio 1558 with a Broadcom wireless adapter. It's a brilliant piece of hardware and love everything about it except some of it's overheating problems. When I first bought it with Windows 7 pre-installed, it had an application installed on it called PeerNet, which creates a wireless network for other computers (and wifi-enabled phones) to connect to it. Simultaneously, you could also share your internet connection with these users. The internet connection could be either wired or wireless.
My question is, how do I go about finding the same functionality on Ubuntu since I know my hardware is capable of it. (I believe in Windows 7, it creates a virtual adapter that it uses) I know there are ways to share a WIRED internet connections with some help with the terminal, but I haven't found a way to share a WIRELESS internet connection. The network manager allows you to create a wireless network but I'm unable to connect to another wireless network at the same time.
The reason I mentioned mobile phones is because my mobile (Android 2.2) is unable to find a wireless network created by the network manager, but another laptop is (without internet access that is). I've noticed that mobile devices and iPod's aren't able to find ad-hoc networks on Windows PCs as well.
I hope someone out there will be able to find a solution for me (and surely others as well!) Maybe the final release of 11.04 will help out later if nothing turns up now.
First time poster, some time Linux user. I've been reading and trying to create a wifi access point on my debian server. that is {intenet-router} <-> {server + usb-wifi} <-> {network users}
I've opted for this configuration as the server will become a firewall, traffic monitoring (sick of my windows machine getting hacked). I've spent a lot of time and I don't seem to have any un-clicked links in google left. I've read quite a few howtos and threads on this site and others ... I'm definitely missing something. Running: Debian Lenny (no gui)
[Code]...
I've also installed hostapd, and attempted a few things in there. Long run I want to allow wifi users to access the net. But will probably need iptables etc but just want to pass this step. I've see a few howtos seem to use ath0. It's probably only a minor issues.
I've been using my upstairs computer with no problems recently up until this evening, when I rebooted it did an automatic scan of my disks, so I left it to it's thing and when I came back ubuntu had successfully booted, and had seemingly successfully connected to my wireless network as usual.
I've been through the wireless troubleshooting guide, paying special attention to sections 4 and 6 but to no avail, while I'm apparently connected, and have been assigned an IP by my router I'm unable to access anything outside my computer, including the router itself. This happened before, however I solved it by reinstalling ubuntu, and I'd rather not do that again!
output of ifconfig eth0 Link encap:Ethernet HWaddr 00:1c:25:38:8e:de UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) [Code]....
I am facing very strange problem with my Dell with WiFi card (04:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100) It seems I am connected to the WiFi but can not access internet I have to disable networking and re-enable it to access internet.
Working with a Dell Inspiron 6000 and installed Ubuntu 10.10 just to get familiar with some form of Linux. The wireless card is Dell's 1470 and the chip on the card is labelled BCM4311 so that's what I went for. At first it showed an unconnected wired NIC and for wireless it said "no firmware", but now it doesn't say anything about either one of them, it says "no network devices available". I followed the instructions here [URL] for both "STA - No Internet Access" and "b43 - No Internet Access" and when it says to go to the additional drivers menu to enable the new driver, there's nothing on the list. I then tried [URL] that guide and [URL] that one. Don't say things like "just run a qf13 on the PCL so the ergotron bus will be cleared, it's probably a thermawhatsit in conflict with the meatloaf kernel" as I won't have a clue how to execute said instruction. More useful would be "open a terminal and type 'ireallyenjoynewcarpetting' then check if the output says 'blargh 010101' ".
OpenSuse 11.4 Asus Netbook 1000H Following other members in the forums I have installed Opensuse 11.4 on the Netbook. In the early days Ubuntu Netbook Remix worked well for me. But this has been discarded, and the "one size fits all" Ubuntu had become slow and cumbersome. So..... onto my post. Opensuse is working well. The install went beautifully.
It detected the Wireless Internet and I am able to get on line. I also need to share the Internet connection to a desktop. This is done via a small network switch. Thus far I cannot do this. I tried to use ifup to configure a static ip but this busted my Wireless configuration. I went back to knetwork manager. Then I tried to set up the wired network using knetwork manager and under IPV4 "share" the connection. But this blanks out any possiblity of a static address and substitutes dhcp. My desktop cannot ping the this dhcp address. Ubuntu had this thing called Firestarter? - from memory. This configured the system to sharing the network.
Problem with this bizarre Wifi problem. I have searched and searched and cannot find a solutions. Unfortunately this affects 3 computers in my household. And as the resident amateur Linux tech support/Linux advocate, I will be held responsible if I don't figure out how to fix this quick. After some extensive playing around, this is the situation. I have this problem on Ubuntu 9.10, Mint 9 (based on Ubuntu 10.04) and PC Linux OS 2010.:
- About a week ago the wireless network I use stopped working. There was a major power failure on our block during this period. No idea if there was a connection. Since then, I have been able to connect, but I am no longer able to access the internet. I can ping my own IP and my router, but no website (niether by IP not URL).
- When I booted my computer in Windows, it connected to the internet. My neighbours (whose network I am using) are also windows users, and are able to access the internet without problems. - I have found exactly the same problem on my wife's laptop running Ubuntu 9.10 and on a Live CD of PC Linux OS 2010 - I am still able to log into all other wireless networks without problems.
I am perplexed. Is it possible for a wireless network to prevent internet access to linux computers? And inadvertently? I tried disabling IPv6 (which wasn't being used anyhow), but this didn't make a difference. I also tried manually entering an IP address and other network details into the network settings.
I have a Centos5.4 64bit laptop, having an eth0 and a wlan0. I connect this wired eth0 to a wall socket to access Internet via DHCP (eg the assigned address is like 192.168.192.xx). I do not have access to the ADSL router. How can I turn this laptop into a Wifi access point to allow, say my Ipad or any wireless-only client, to access the Internet thru this laptop ?
That is, communication between iPad to laptop is wifi(ad-hoc connection ??), laptop to the ADSL router is wired LAN. The laptop need to have some bridging build in ? If you can refer me some concepts, then I can follow up from there.
I have a fedora 10 box with two network card on eth0 I have a pppoe connection to the internet, on second card eth1 I share my internet connection end I set up a samba server but I don't know if the settings are good. How to do this settings right to work fine, the ip are assigned by dhcp I don't use any static ip .When I try to browse the internet from the other computers some site's like {.com ; .org ; .info} are block, other site from {.ro} are working. Someone tell me something about turn off all my filters, but I don't know where to find this filter to turn it off. And when I use samba I can't have and internet access or vice versa. My network look like that:
I have wired internet connection and want to share it over a secured wireless network ... when i tried to create a secured ad-hoc network .. system doesn't connect and creates a new network with the same name but unsecured one ... i have read somewhere this method ..
[code]....
But system doesn't connect to the new network i created ... created new ad-hoc network (unsecured)..and now everyone in my range is using this connection.
I have a WindowsXP virtual machine which I need to isolate from the host machine completely (have the host act as a bridge but not be visible on the IP layer at all.) It still needs to have Internet access. Obviously it has to be able to contact the router but I would like to be able to block port 80 (or even just block all SYN packets addressed to the router.) I also want to allow port forwarding from the router to the virtual machine. I can use basic iptables but this is way beyond me.
The host OS is probably going to be Debian Lenny but this is not built yet so if someone can recommend a different distro which is as lightweight as possible but will support VMWare, iptables and tcpdump then that would be great. I was thinking of Slackware but I have not used it in ages and from what I can remember their is no real package management.
