OpenSUSE Wireless :: Commands To Install Downloaded Broadcom Drivers Located On USB?
Feb 25, 2011
Ok I am a total linux noob, and I was looking through threads and couldn't easily find what I am looking for. I am using a HP Mini 1010nr with broadcom bcm4312 wireless card. I went online and downloaded the drivers onto a USB drive from the broadcom website. All I need to know is what are the commands or the programs I use to install the 32 bit drivers I downloaded?? Sorry I know the answer is in here somewhere but I don't understand what the command is on how to install my drivers from my thumb drive.
View 5 Replies
ADVERTISEMENT
Jun 13, 2011
When I installed openSuse 11.4 it doesn't see my wireless card Broadcom. How can I install Broadcom wireless driver ?
View 9 Replies
View Related
Jun 21, 2011
Wireless Card
07:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01)
If you haven't added any repositories to your system you will need to do so before using zypper to install the required packages below. (instruction on how to do this under heading add repositories below)
Short Fix (This fix works if you haven't already installed b43-fwcutter firmware, and the b43, ssb kernel drivers are not load.)
zypper remove b43-fwcutter
zypper in broadcom-wl broadcom-wl-kmp-desktop
modprobe wl
reboot (and wifi worked after I activated it using FN F3 to turn it on)
Long fix if required
code....
List of Repo's I have added
1. main (contrib)
2. Mozilla
3. Packman
4. Wine
5. Kde Extra's
Packman and Main (contrib) are the most likely sources of the required files.
Once you have added these you should be good to install the required files.
One final note, I had to use an external usb wifi card to connect to the internet to add the repo's and download the required software. Lan card support coming in 2.6.38 kernel (it is suppose to add a driver for our lan card).
View 3 Replies
View Related
Jul 13, 2010
installing the proprietary Broadcom wireless driver for my desktop computer. I have attached this to a LAN and the proprietary driver doesn't load.
View 1 Replies
View Related
Nov 17, 2010
how to use the newly opened Broadcom wireless drivers? Article: [URL] I have a netbook running 10.10 that can't connect via ethernet OR wireless
View 6 Replies
View Related
May 3, 2011
I have a fresh install of 11.04. I am trying to install the "additional drivers" Broadcom STA wireless on my dell laptop. The drivers worked correctly pre-install on the boot up test run, but now they won't activate or uninstall.
On activation attempt, it says : installation of this driver failed. Please have a look at the log.
The log reads: Quote:
2011-05-03 11:49:06,603 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2011-05-03 11:49:06,637 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2011-05-03 11:49:06,679 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
[Code]...
View 9 Replies
View Related
Mar 31, 2011
My broadcom wireless device is of model BCM4313 and I dont find the way to install the drivers.
View 4 Replies
View Related
Aug 27, 2010
So I just recently migrated from Vista to Linux, I'm running Ubuntu Studio 10.04 on a HP Pavilion DV6700 with a Broadcom BCM 4312 b/g frequencies wifi adapter. I followed one guide telling me to use the hardware drivers program to activate Broadcom STA wireless driver, but whenever i attempt to do so it says "SystemError: InstallArchives() failed". Can anyone help?? (BTW i am not that adept with the Linux operating as of yet)
View 3 Replies
View Related
Aug 12, 2010
I just upgraded from 11.2 and it seems 11.3 dosent detect my wireless adapter or ask for a driver update. I have a acer laptop but am not sure what brand the adapter is..
View 1 Replies
View Related
Dec 14, 2009
I'm trying to install some wireless drivers, but apparently I don't have a /lib/modules/<kernel>/build directory, which is causing the Makefile to throw an error. Is there a specific place I should point the Makefile at?
View 9 Replies
View Related
Apr 28, 2011
Well I am trying to install the b43 drivers since the default drivers are broken but with the new unity desktop I cannot figure out how. Is there a guide for this yet? The sticky at the top of the forums seems to be for 10.10.
View 8 Replies
View Related
Sep 9, 2010
any idea if openSUSE will be able to get this into 11.4?Broadcom swims upstream, tackles Linux WiFi woes with new open drivers
View 1 Replies
View Related
Feb 12, 2011
I'm having trouble installing my wireless card drivers. I've read a lot on this using Ndiswrapper to install my drivers but when I go to install I get this.
linux-8h6g:/wg311 # ndiswrapper -i wg311v3.inf couldn't open wg311v3.inf: No such file or directory at /usr/sbin/ndiswrapper line 219.
I'm giving the right path to the inf file tried moving to other folders and still nothing.
View 9 Replies
View Related
Aug 16, 2010
I'm trying to install the drivers for my Wlan card, I've downloaded the drivers in the tar.gz-file from Broadcom and untar-ed it in my /home/<username>/hybrid_wl-folder and cd'ed to it and I try to run "make" but I get an error: KBUILD_NOPEDANTIC=1 make -C /lib/modules/'uname -r' /build M='pwd' make: *** /lib/modules*2.6.31.5-0.1-default/build: No such file or directory. Stop make: *** [all] Error 2
I'm getting really desperate, I need my Wlan on Wednesday. I'm following the README but this is what I get.
View 7 Replies
View Related
Feb 8, 2010
I need to install the drivers for wireless.... rtl8187 11g USB adapter... I have a opensuse 11.2
View 7 Replies
View Related
May 3, 2011
when it comes to openSUSE but I am earnestly trying. I installed the openSUSE OS on my HP dv6000 laptop, but it does not seem to recognize my wireless card (which is a Broadcom 4311).
View 7 Replies
View Related
Aug 3, 2011
Since there is no "Additional Drivers" app in Fedora like there is in Ubuntu, how the heck can I install the Broadcom STA drivers from the Live CD without using an Ethernet cable? And how the heck can I ensure that they stay installed, even after installing Fedora? I suppose putting the RPM on a USB Flash Drive will work, but that's the only thing I can think of... And is there an RPM out there for this specific driver?
View 8 Replies
View Related
Dec 20, 2009
I'm happily using OpenSuse 11.2/KDE on my laptop equipped with a Broadcom BCM4311 WLAN chip, but today, after a restart, WLAN ceased to work. I mean that Network Connection doesn't show anymore available WLANs. Two things that seem strange to me are that the
[Code]...
View 8 Replies
View Related
Dec 15, 2010
I have this problem with my wifi for 2 weeks now.It used to work great and after some updates the Network Manager keeps rejecting my wpa passwords. The wifi card is working (tested with other OS's) and the wifi light on my HP laptop is on. I have installed broadcom drivers.The problem is similar with this one here but changing from default kernel to desktop didn't work in my case. have already read through Getting your Wireless to work and Broadcom instructions
View 7 Replies
View Related
Jan 13, 2010
dell laptop and went out on thenet looking for a solution for my failed wireless interface. i downloaded the firmware but then my interface still fails to come on after a reboot.
wlan0 IEEE 802.11bg ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=0 dBm
[code]...
View 4 Replies
View Related
Jan 16, 2010
I recently bought Dell Studio 15 laptop, installed OpenSUSE11.2/64 in addition to Win7 64 bit. I am trying to connect it to my wireless network at home and at work, but without much luck.
1)Found out that Dell 1520 WLAN adapter has Broadcom 4353 chipset.
2)saw that b43-fwcutter installed
3)installed broadcom-wl and broadcom-wl-kmp-desktop
After that can see many wireless Access Points at home,selected one via NetworkManager (eth1), configured it (incl. security same as in Win7), it goes from Activating to Active, but I still can not connect - I mean, in the FireFox - "page not found"
iwlist scan (for my desired AP):
Cell 03 - Address: 00:E0:98:FA:5D:1A
ESSID:"Blackhawk"
Mode:Managed
[code]....
I can easily connect to WLAN at home and at work in Win7.
View 8 Replies
View Related
Jan 26, 2010
I can't get the wireless to work on my laptop its a hp Pavilion dv9700 it has a Broadcom 4321AG 802.11a/b/ g/draft-n Wi-Fi Adapter i cant seem to get it set up.
View 6 Replies
View Related
Jan 7, 2010
How can i install drivers for Dell Wireless 1397 802.11b/g Half Mini Card.I'm using openSUSE x86_64 on my Dell Inspiron 1440.
View 6 Replies
View Related
Apr 3, 2010
when one downloads non-rpm packages they are placed in a download window(by file roller).Could someone explain where exactly this download window is located in the directory tree? or is it? how does one install these packages from the terminal as root without knowing where their located?
View 1 Replies
View Related
Dec 14, 2009
I'm having some issues with openSUSE 11.2 recognizing my Broadcom adapter. Following the instructions in the two stickied topics, I can find the adapter both under YaST's Hardware Summary and using the console command /sbin/lspci. I cannot, however, find it with /sbin/lspci -n, and the boot log (viewed with dmesg | less) makes no mention of it either.
Do I need to turn it on or something? This is a dual boot machine, and it works fine under Windows, so I don't think there's a hardware failure at play here.
View 9 Replies
View Related
Oct 5, 2010
I've been reading up on how to get the Broadcom BCM4312 802.11b/g on my Dell Inspiron 1525 to work with OpenSUSE and I've tried everything, I've even re-installed the OS 3 times as I seemed to keep screwing something up. I've tried doing what it says in this thread
Install Broadcom Drivers from Packman
I thought I'd installed the write drivers with this code:
Code:
zypper in broadcom-wl broadcom-wl-kmp-default
View 9 Replies
View Related
Dec 7, 2010
For those of you that prefer open-source solutions, the b43 code to drive BCM432X 802.11n devices has just come to life. It can now scan and associate. Tests for throughput will come soon. These revisions to the driver will be in kernel 2.6.38, thus not in openSUSE until the next release after 11.4.
View 1 Replies
View Related
Apr 18, 2011
I have installed b43 with the install script and I can see all wireless networks fine, but NetworkManager just keeps asking me for the WPA passphrase, despite it being correct. I tried disabling WPA on the router, but then the connection hangs at "Configuring interface" instad. I also tried with ifup, but I'm not sure I configured everything correctly. I don't get any smarter from the NetworkManager logs, maybe someone else can decipher them? tail -50 when connection doesn't work:
Code:
Apr 18 17:00:11 jan NetworkManager[1291]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Apr 18 17:00:11 jan NetworkManager[1291]: <info> Config: set interface ap_scan to 1
[Code]...
View 2 Replies
View Related
Feb 3, 2010
I have been trying to get my Broadcom BCM4328 to work properly on openSUSE 11.2 (kernel 2.6.31.5). Finally, after installing the wl kernel module, I managed to get it working when a run the following commands after a reboot:
sudo /sbin/modprobe -r b43 b44 ssb wl
sudo /sbin/modprobe wl
sudo /sbin/modprobe b44
sudo /etc/init.d/network restart
My question is how can I automate the above commands, i.e. create a startup script to initialise the wireless adapter properly without the need to manually reload the kernel modules?
View 3 Replies
View Related
Mar 12, 2010
Dell Studio 17 Laptop
OpenSuse 11.2
Drivers:
broadcom-wl-kmp-desktop-5.60.48.36_2.6.31.12_0.1-7.pm.13.1.x86_64
broadcom-wl-5.60.48.36-7.pm.13.1.x86_64
# /sbin/lspci
[code]....
On every other machine and on this laptop when running Windows,It is WEP, Open system, Key Index 1, and the passphrase works except on this when running OpenSuse.It seems as if it just times out.
View 1 Replies
View Related
