Ubuntu Networking :: Wireless BroadCom Not In Proprietary Drivers?
Jul 13, 2010installing the proprietary Broadcom wireless driver for my desktop computer. I have attached this to a LAN and the proprietary driver doesn't load.
View 1 Repliesinstalling the proprietary Broadcom wireless driver for my desktop computer. I have attached this to a LAN and the proprietary driver doesn't load.
View 1 RepliesJust upgraded to Lucid from Karmic. First thing I notice after restart is that I have no wireless. No big deal, I probably just need to re-install the proprietary drivers. I go to do this, and it gives me an error message, saying that the installation has failed. This has never happened before, and didn't happen when I upgraded from Jaunty to Karmic. I have an HP dv6 1230us and a Broadcom STA card.
I really need the internet to be working, and didn't anticipate that an upgrade, of all things, would screw it up...
I just re-installed Ubuntu 10.04 and was trying to install the Broadcom STA wireless driver. It worked for me before with no problems, but now when I try to install any proprietary driver (using System >>Administration >>Hardware Drivers) I get an error message that says: "You are not authorized to perform this action". I am the only user and I have administrator privileges, so I do not know why I am getting this.
View 1 Replies View Relatedhow to use the newly opened Broadcom wireless drivers? Article: [URL] I have a netbook running 10.10 that can't connect via ethernet OR wireless
View 6 Replies View RelatedI have a fresh install of 11.04. I am trying to install the "additional drivers" Broadcom STA wireless on my dell laptop. The drivers worked correctly pre-install on the boot up test run, but now they won't activate or uninstall.
On activation attempt, it says : installation of this driver failed. Please have a look at the log.
The log reads: Quote:
2011-05-03 11:49:06,603 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2011-05-03 11:49:06,637 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2011-05-03 11:49:06,679 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
[Code]...
So I just recently migrated from Vista to Linux, I'm running Ubuntu Studio 10.04 on a HP Pavilion DV6700 with a Broadcom BCM 4312 b/g frequencies wifi adapter. I followed one guide telling me to use the hardware drivers program to activate Broadcom STA wireless driver, but whenever i attempt to do so it says "SystemError: InstallArchives() failed". Can anyone help?? (BTW i am not that adept with the Linux operating as of yet)
View 3 Replies View RelatedI've just been trying to troubleshoot a problem by installing and activating the proprietary BCM4318 drivers instead of the ones that came with Maverick.I used System-Administration-Additional Drivers to install the new drivers. As far as I can tell from lsmod and URL... the new drivers are known as b43.It didn't occur to me to run lsmod prior to this, and now I'm curious - what would the non-proprietary drivers that came with Maverick have shown as in the lsmod output?
View 8 Replies View RelatedMy broadcom wireless device is of model BCM4313 and I dont find the way to install the drivers.
View 4 Replies View RelatedOk I am a total linux noob, and I was looking through threads and couldn't easily find what I am looking for. I am using a HP Mini 1010nr with broadcom bcm4312 wireless card. I went online and downloaded the drivers onto a USB drive from the broadcom website. All I need to know is what are the commands or the programs I use to install the 32 bit drivers I downloaded?? Sorry I know the answer is in here somewhere but I don't understand what the command is on how to install my drivers from my thumb drive.
View 5 Replies View RelatedI have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
I know i know, some will say "eww Proprietary Drivers" but hey, ubunt is all about having more control of the OS. Is there an easy way to install Proprietary Drivers thats not through the hardware drivers option on system?
View 2 Replies View RelatedI installed Xubuntu the other night (completely wiped machine) and started doing all the updates on it. After a couple of reboots, I changed from the proprietary drivers, to the regular nVidia drivers. After doing this, the startup logo is displayed at a really low resolution. Is there a simple fix to change this and use the nVidia drivers as well?
View 1 Replies View RelatedWell I am trying to install the b43 drivers since the default drivers are broken but with the new unity desktop I cannot figure out how. Is there a guide for this yet? The sticky at the top of the forums seems to be for 10.10.
View 8 Replies View RelatedI have an HP Pavilion Dv6-1230US laptop that I bought from staples when it was on sale for 800 dollars with a 4 year accidental damage warranty. It came with Vista Home Premium 64Bit installed. It had Windows 7 Business 64Bit on it at one point, And the latest windows installation was Windows Vista Business 32Bit. My trial period ran out on vista and I switched to Ubuntu 10.04 32Bit, and, as always, I have a problem with the wireless card. I have looked it up and everything, i do have the drivers installed, and it looks functional, but its not. It will act like its going to connect to my AP (Netgear WNR3500L that is like 2 days old), but it eventually askes me for my WPA2-Personal AES key, which I have supplied, and is correct before hand, i type the exact same thing in and it still doesn't work.
I've tried sudo apt-get update, and sudo apt-get upgrade, but it doesn't work. nothing has to update. This installation was installed today, and updated about 6 hours ago to the fullest extent.The wired works absolutely perfect (that's how i updated it). Hardware:Laptop has a Broadcom 4322AG b/g/draft-n wireless card from HP integrated into the laptop. The router is a Netgear WNR3500L which i bought because we are switching ISP's soon and our old router is a modem, that will only work on a DSL connection.
I've been running Karmic since it was officially released on my Dell Studio 17 (specs are in my signature) with a Broadcom wireless half mini wireless card.hen I installed Karmic, it gave me the option to install proprietary drivers for my video card as well as 2 Broadcom drivers, STA and one of the BC43 drivers. I installed all of these, and the only problems I had were with the audio. I spent a few days troubleshooting the audio and finally got PulseAudio set up for my card.
Almost 3 months later, I was making use of my wireless network at home, as I had done plenty of times over the previous 3 months, when I closed the lid (thus putting the computer into sleep mode) and took it to the hospital to stay with my fiancé¥ after her surgery. When I got to the hospital, I couldn't get their network to show up. Network Manager didn't even recognize the network. We had also brought my fianc饧s laptop (same machine with a slightly less powerful CPU and only 4 GB of RAM). She is running Windows 7, which detected the hospital's network with no problems.After trying to ad-hoc the hospital network with no success, I finally just gave up and played Sudoku and toyed with some graphics stuff in GIMP until we came home. Upon returning home, however, I was shocked that my card didn't even detect our home network.
I have been unsuccessful for the past 3 days in getting Network Manager to identify our wireless network. The wired network connects without issue and I am able to make use of a USB Belkin adapter, which identifies all 7 of the various wireless networks in my neighborhood, including our home network.While I would be able to simply carry my Belkin adapter with me in order to make use of wireless networks, I would really like to solve this problem with my Broadcom adapter. I've gone through the Ubuntu Wireless Network Troubleshooting guide, but I still can't get it to workOutput of lshw -C network:
Code:
*-network
description: Wireless interface
[code]...
I just bought a brand new Lenovo ThinkCentre A70z (All in One). Today I installed Ubuntu 10.4 32bit version, Here are the problems I encountered.1) Ubuntu didn't recognize my Broadcom Wifi Card by default, all though the drivers are there on the DVD, it seems to be blacklisted.my hardware details are :02:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4357] (rev 01)Subsystem: Broadcom Corporation Device [14e4:04da]I managed to activate the drivers.the drivers I am using are :
a) Package : bcmwl-kernel-source
Installed Version : 5.60.48.36+bdcom-0ubuntu3
b) Package : bcmwl-modaliases
[code]....
my OS is linux ubuntu x64 v10.10 on netbook dell vostro 1520. i'm looking for wlan [COLOR=#00C800 ! important][COLOR=#00C800 ! important]drivers[/COLOR][/COLOR] for network adapter broadcom like this:
Quote: Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
I still try update my broadcom drivers, because when I try use airodump-ng i receive error.
This error:
Interface Chipset Driver
eth1 Unknown wl (monitor mode enabled)[code]....
I dont know why receive this error WARNING: modpost: missing MODULE_LICENSE() in /home/mobile/Desktop/wdriver/wl.o
see include/linux/module.h for more information
I am running FC13 on a Compaq Presario 2100 using a Broadcom BCM4306. I was able to get it running thanks to Fedora Unity Project. But It's a very unstable connection. I don't know what settings to adjust or enable or disable. It's not my router, this is the only wireless connection in the house that I have trouble with.
View 1 Replies View RelatedI've installed Ubuntu Netbook 10.04 on my HP DV2000 laptop and now I want to get my wireless to work by installing the proprietary broadcom drivers (4311, I think). But my internet doesn't work yet obviously, so I need to download the drivers to my thumb drive on my desktop and install them on my non-networked laptop.My issue is that I don't know:a) Where to get the driversb) How to install them from a local drive
View 2 Replies View Relatedthe wlan card is boadcom 802.11b/g WLAN its on HP 6000 laptop it connect im a total newb to so that dosnt help me very much i see a lot of kernel stuff wich i have no idea what that means but it connects on XP but not on ubuntu i just installed it as a dual OS on XP and im lost i have treid a few things that others have posted on other sites but with no success HELP i am running a Linksys wireless G router the WRT54G model and everything i have tried has not ever enabled the wireless for ubuntu so far anybody got answers please help a newb i can get what ever you ask me to type i bet but i have no Exereince on linux /ubuntu
View 1 Replies View RelatedAfter some serious trouble with Plasma, I decided to re-install 9.10. When booting up, I noticed that the wireless indicator light stayed on orange which usually means that the driver is not loaded.
I have a Broadcom 4312 in a HP Pavilion dv6. I checked the repository but no driver shows up. I seem to remember that it used to be there. Or am I mistaken and do I need to install the vendor driver from the Broadcom site?
I've added the output of lspci and dmesg | gre b43
HTML Code:
HTML Code:
I've got a Dell Inspiron mini 10 that has the Broadcom 4322 wireless chipset in it. I have NEVER got this thing to work satisfactorily despite the numerous tutorials online about getting this damned card to work. I thought everything would finally be fixed with 10.04 but no luck at all. I've tried the b43 diver (which isn't supposed to support the 4322) with no luck.
I also tried the restricted STA driver, which seems like it will work as it identifies networks and even connects to them! However, the speed is excruciatingly slow and connections drop like flies. This netbook is actually a friends that I convinced to let me put Ubuntu on and have them try it out, but they are most surely not going to be impressed if the wireless never works.
I installed Ubuntu Netbook on my windows xp machine, a HP Mini 110 with a broadcom wireless card, I installed using Wubi. The wireless on the ubuntu side isn't working and I can't plug into a physical line, how do I fix this?
View 3 Replies View Relatedwith some troubles, i finally installed the broadcom wireless driver. it says it's installed and activated, the blue light on the laptop is on saying the wireless is activated, but for the life of me i can't figure out how to make it connect. the only network connection icon i have is the wired one. it's not showing the wireless, or available wireless signals or whatever.
this is my first time using wireless with linux (thought i've been using linux for about 4 years now), so maybe there's some stupid little box somewhere i didn't check or something. any ideas?
the laptop is an HP Pavilion dv9000, the distro is Ubuntu Studio 10.4, and the wireless card is a broadcom, and is installed/active according to the hardware drivers window. i've seen some posters having a problem in 10.10 with everything appearing to work, but just... doesn't. haven't seen a solution for that particular problem though
I have a Dell Vostro 1400 with a BCM4311 Broadcom wireless card that I just reinstalled with 11.04 from 10.04. I have the drives installed and it seams to be working when i run the 'Additional Drives', but I can't get the wireless adapter broadcasting. I followed the instructions given in the knowledge base on installing Broadcom Wireless, to see if I could get it running and that is where I saw the difference between the example and my computer when writing the 'sudo lshw -C network' command. In the example it said it was broadcasting under configuration (just like my wired networks below) and in mine it does not (see below for copy past).
I can't find a tickbox in the systemtray to enable the wirless networking that I had before the update to 11.04 (the 'Enable Networking' tickbox is still there and the wired network works fine - that is how I got online to do this post). I have the hardware switch turned on and I have been in the BIOS and made sure that the Wireless is enabled.Anyone who knows what could be wrong? Where could I go from here?Quote:
morgan@morgan-Vostro-1400:~$ sudo lshw -C network
[sudo] password for morgan:
*-network UNCLAIMED
[code]....
ive installed ubuntu 11.04 and my broadcom wireless is not recognized.
View 8 Replies View RelatedI just installed Ubuntu today and when I go to Hardware Drivers it tells me that there are no proprietary drivers on this system and doesn't show any for me to activate. Oddly enough when I was running the live CD of Ubuntu I got a list of a few drivers to activate, namely the Broadcom STA Wireless Driver and the NVIDIA Accelerated Graphics Driver (version 185).
View 9 Replies View RelatedI just built a new HTPC and decided to give Ubuntu a whirl again. I downloaded and installed 10.04, and set about configuring it. Everything looked great, except my audio over HDMI didn't work. I enabled the proprietary ATI drivers, and bam! the audio works! Great. Only one problem: there's a two inch border around my TV (not there with the open source drivers), and Boxee flashes colors rather than playing videos (a known bug. It's fixed by not using the ATI proprietary drivers). So, I disabled the drivers, rebooted, and the Boxee video works, the border/gap is gone, but once again the audio doesn't work. I've been through all the sound settings, and I have everything set to the HDMI output, but still nothing. I've tried various fixes I've found through googling
View 4 Replies View RelatedI am using Ubuntu 10.04 and unable to connect to the internet. I went to System > Administration > Hardware Drivers and a window popped-up: "No proprietary drivers are in use on this system". So I selected the "NVIDIA accelerated graphics driver (version current) [RECOMMENDED]". But when I try to "Activate" I get this following error:
"failed to fetch [URL] temporary failure resolving 'us.archive.ubuntu.com"