I find any wireless networks, except mine. Moreover, my wifi works, because I can surf with the university connection.But the network works, because I can connect to it both with Windows and with Ubuntu.I have a Broadcom 4321 like wireless network card, opensuse 11.4 and the default network manager.
View 8 Replies
I'm running OpenSuse 11.4 with kernel (2.6.37.1-1.2-desktop i686) and KDE 4.6.00 "release 6".When I first installed the system the KNetworkManager found my wireless network. After entering my details it suddenly couldn't find it any more and hasn't found it since (even after re-install). My network is definitely working. I did try and set it up with ifup but it still couldn't find any network. Unfortunately I don't know anything about networks even less about wireless ones. Many thanks in advance.
View 9 Replies View RelatedI have installed open suse 11.3 with no issue, but I can't find the dirvers for the wireless network card/
Wireless, Half Mini-Card, DW1520
When i click the button to connect to a wireless network this message apears:Network management disabled
View 1 Replies View RelatedI cant get openSuse to find my wifi adapter or it does not have the driver installed.
My wifi adapter is the Realtek RTL8191SE 902.11b/g/n
I found a linux driver on the internet, but it asked me to run make in the console and when I did so it said that it couldn't find make.
how to install make from openSuse without the internet (I'm using my windows partition).
at start, knetworkmanager detect wireless network, but doesn't automatically connect - I have to restart it to make it work properly. Instead, it gives that error:
[Code]...
On Opensuse 11.2, I would like to connect my ipod touch to a wireless ad-hoc network of my laptop. I have no wireless WIFI-router at home, so I have to use the laptop as a router to the internet. I know I have to enter a static IP adres and my router's address, but where ? I haven't found any place under network tools to do this, only saw some fields with SSID's and MAC addresses to fill in.
View 5 Replies View RelatedI've got openSUSE 11.3 running via liveUSB on a netbook and no matter how many times I try, I cannot get wireless to connect to my network.
My network is:
- non-broadcast
- WPA2 Personal
- G
The netbook is fairly recent from Asus and wireless works perfectly with Fedora 11 and Windows XP.
1 ) make and model of wireless device Athreos 5k
2 ) driver version in use dont know
3 ) any error message. -
abhishek:/ # sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a
Flags: bus master, fast devsel, latency 0, IRQ 23
Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
[code]....
I clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
View 1 Replies View RelatedI own an ASUS N61JV-X2 notebook PC. It has an Atheros Communication, Inc. AR9285 Wireless Network Adapter. 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 0280: 168c:002b (rev 01) I cannot see any SSIDs including my home Verizon FiOS 802.11 G WPA2-AES-TKIP encrypted network. I went to Starbucks to try to connect to their free Wi-Fi and I could not make a connection. How do I solve this problem so that I can connect to a SSID of my choice and make a wireless connection while using GNOME 3?
View 2 Replies View RelatedI'm moving from other distros. and I'm currently loving openSUSE and I'm probably going to stick with it for a long time.I have already googled for this, but I found no solution, but I figured this should be a common problem... Does google searches inside this forum?Now... for my problem, whenever I hibernate (suspend to disk) or sleep (suspend to ram) I can't resume my wireless connection nor connect to another.I don't know if this is an issue if I use cables, because I simply don't with my netbook:The hardware in question is an ASUS 1005HA eee pc, running openSUSE version is 11.3 fully updated. Didn't mess with wireless connections, nor kernel or hibernate settings
View 9 Replies View RelatedI am trying to configure a wireless connection from YAST under the Network Settings tool.It doesn't seem to do anything. My USB wifi device is detected in YAST > Hardware and I am using the module it says Hardware is using. It doesn't seem to save the module under YAST> Network Settings> Network Card Setup. Is this tool broken or useless? It seems setting up WiFi should be easier than this. YAST should work shouldn't it?
View 9 Replies View RelatedI'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies View RelatedOne of the biggest issues i have at the moment is that my network based plasmoids on my KDE desktop load before my wireless network connection is established, so i'm thinking it would be best to start up the wireless connection at boot time. On previous distro's, I did this with netcfg but I can't seem to figure out how to do so in OpenSUSE 11.2. Is this the best way to manage this issue or is it possible to set a delay before the plasmoids load up?
View 5 Replies View RelatedI am running SLED 11 and My Networkcard is Intel PRO/Wireless 5300. In short, it is not there anymore! I mean I was connected and everything and the next time I restarted It could not detect any wireless network. I deleted the wireless network card in hopes that the OS will automatically detect it on startup and set it right but NOPE. When I check the hardware information in YAST, it is listed there and it is also working under Windows.
View 4 Replies View RelatedSystem Information:openSUSE v11.2 32-bitdesktop: KDE 4.x (.3 I think)Background info: Installed openSUSE 11.2 on an old HP laptop this morning. I've been trying to set up my wireless connection since. After 2-ish hours of searchingupport forums, I managed to use network manager to connect to my home wireless network via WEP, I will say now that I've had lots of trouble.
I've finally been able to connect to my network, to a point. The NetworkManager in openSUSE says that the wireless connection is active. I can verify this by saying that on the other conputers in my house (winXP, win7, and Ubuntu v9) I have been able to ping this openSUSE computer and my router recognizes it as part of the network. Here is where the problem arises: I cannot access the internet from the openSUSE machine, with a domain name or by trying to type in an ip address, and I cannot ping other computers on my network with it.
I'm running the latest Ubuntu Desktop Edition as a second operating system (over my Windows Vista), and I'm having trouble with my wireless internet. I'm picking up signal for 7 other networks, but not mine. And I can't figure out how to make it search for more. If it's relevant I have a WPA2 Personal network set up, that is received on my PC when I run Vista and on my XP laptop (which I'm on now).
View 3 Replies View RelatedI am trying to configure a Travelmate 2490 to connect to my wirelessr router, a TP-Link TL-WR941ND. It does not show up in the list when I use network manager. However when I look to see if there is a driver for my wireless network in the computer it seems to find one. I am quite a beginner so some basic troubleshooting would be great.
View 1 Replies View RelatedI was using ubuntu 9.04 and everything was working flawlessly with my network. The only problem with 9.04 is that it was unsupported and I couldn't install the packages I wanted to such as Cairo dock so I decided to upgrade to 9.10 which is a lot better. However I ran into a problem that I never had on 9.04. I cant connect to MY wireless network (my Belkin wireless card can detect networks but not mine) I have a netgear router WNDR3700v2 with WPA2 encryption. I thought that the encryption was the problem so I turned it off and ubuntu could still not find the SSID through the network manager. My SSID broadcast is on.
View 9 Replies View RelatedMy first problem is that when I open KNetworkManager the wireless tab is desibled,I don't know why! My laptop is HP pavilion dv6-1245DX. How to get connected to my wireless router?
View 9 Replies View RelatedI recently installed the Maverick Meerkat distribution and am having problems getting it to find and connect to my wireless network. Additional info: I am using a Toshiba laptop and used the wubi installer to get Ubuntu.
View 9 Replies View RelatedI installed lxde on Ubuntu 11.04 but I cannot find any network manager to connect wireless LAN. There are some sort of network manager and they show available signals to connect but cannot find any way to command computer to "connect" it.
View 1 Replies View RelatedFor some reason, ubuntu cannot find local wireless networks. In fact, the Broadcom wireless card Ralink RT5390 802.11b/g/n seems to be incompatible with ubuntu. I've tried numerous 'solutions' on the Internet, but none of them seem to work on my computer. Tutorials I've visited have recommended downloading the b43 drivers from the Synaptic package manager and also the bcmwl-kernal-source package. Nevertheless, the wireless never turns on and Additional Drivers never shows anything at all. After several exasperating hours of trying to get my wireless running I've decided to turn to the forum for help. I'm sure there's probably more information I should supply, but I'm honestly not sure what that would be.
View 2 Replies View RelatedI'd like to know how can I find a Linux wirelles driver for wireless Belkin card.
View 1 Replies View RelatedI try to install Debian 8 on my desktop PC that has a wireless network card.I had already used this computer with debian 7 and I could use my problem-free network connection.
My network card is : Asus PCE-N10
During the installation, a message occured to ask me to load a firmware (rtlwifi/rtl8192cfw.bin) which is loaded from a USB key.After this, Debian-installer seems to find my wireless card but can not find wireless network.I have this message, translated from French: "The search for an available wireless network failed" and I can enter an ESSID but inconclusive.
I normally connect to a free wireless project, and did have a Windows box until yesterday when I installed Fedora 10. When I was using Windows, I was able to connect to the unsecured wireless network. Now on Fedora 10, the wireless card is working and is able to pick up signals but the signal strengths are markedly decreased and I am unable to see the network which I usually connected to.I really don't want to go back to Windows.
View 12 Replies View RelatedIm just after installing fedora 12 dual boot with windows 7. When I try to find my wireless network the laptop doesn't seem to picking it up. It works perfectly when I connect with a LAN cable.
View 2 Replies View RelatedTo start off I have a Rosewill rnx-n2x wireless adapter and a Dlink 4500 router. The problem is, the wireless network manager detects every wireless router in the neighborhood, except mine. I see this persons, and this persons, but no "My router Not yours". I even tried doing the hidden network setup and still nothing.
I have read that the rnx n2x isnt supported by linux, although I've seen solutions to make it work (which didn't work, mkdir command kept getting denied during make) link to what I'm talking about: [URL]. What I don't get though, is that if the rnx n2x isnt supported by linux, wouldn't I not be getting my neighbors connections to begin with?
I am unable to access wireless network from my notebook. My configuration is Dell i5, 4GB RAM and 1397 W-LAN and I have F13. I can still access Internet through Ethernet using a LAN cable but the network monitor doesn't show list of Wireless networks which my room mate's windows 7 machine easily detects.
If anyone needs more info please provide me the steps to perform to find that out
