OpenSUSE :: WARNING: Errors 0 Skipped Probes Xx
May 13, 2011
I have recently moved over to opensuse 11.4 (never used any Linux before), I have installed all updates and am using the latest KDE. (I am using a laptop, not sure if this is relevant) I have found using the system fairly easy and found all the help I need either here, or out on the net. However, I cannot find much information about the above error message that I sometimes get. I have only noticed this error occasionally when I resume from sleep mode, or when I turn the computer off. I haven't seen the message anywhere else (pop up window, konsole etc) Sometimes the skipped probes is as high as 70, other times as low as 10. I don't know what it is scanning(?)
View 9 Replies
ADVERTISEMENT
Jul 8, 2011
After successful upgrading from 11.3 to 11.4 I had to install ATI driver from here Index of /mirror/ati/openSUSE_11.4 and delete the old ones. After rebooting the system entered in runlevel 5 where I received kwin error which I couldn't back-trace with the tools, but it was working. When I have made an on-line update and rebooted again it went to runlevel 3 without showing any error. When I type startx it shows error, but when I enter as root KDE starts normally and it's functional. how to get to the KDE with my account, but not as a root user?
View 9 Replies
View Related
Sep 20, 2010
OpenSuse shows me this on boot:
Skipped Processes on run level 5 early xdm cifs nfs xdm
View 9 Replies
View Related
Jul 30, 2011
After successful upgrading from 11.3 to 11.4 I had to install ATI driver from here Index of /mirror/ati/openSUSE_11.4 and delete the old ones. After rebooting the system entered in runlevel 5 where I received kwin error which I couldn't back-trace with the tools, but it was working. When I have made an on-line update and rebooted again it went to runlevel 3 without showing any error. When I type startx it shows error, but when I enter as root KDE starts normally and it's functional. how to get to the KDE with my account, but not as a root user ?
View 9 Replies
View Related
Dec 3, 2009
After the GRUB prompt, my boot process does not advance to the login GUI. It kicks me out to the console view of the boot process and ends with a text prompt for logging in.
I get the following message just before the "Welcome to OpenSUSE 11.1" line:
Skipped services in runlevel 5: nfs
what's happening and how can I retrieve the login GUI?
View 6 Replies
View Related
Oct 22, 2010
I'm having some issues on a server running redhat for specific application and lately it has been for some reason kicking out some services. I just checked the Logwatch mail on the root user and here is one of the main error:
[code]...
View 2 Replies
View Related
May 4, 2010
Had Ubuntu 9.01 in Windows 7 as a Dual Booty - no problems.
When upgrade to 10.04 attempted the following errors occur:-
1. Missing Resources warning - " The Networkmanager Applet could not find some required resources. It cannot continue."
When I click OK wireless connection is totally lost with no means of reconnecting.
2. Download progresses but freezes at the download of "Preparing memtest86+"
View 1 Replies
View Related
May 4, 2010
if this is log spam or significant stuff, and what I should do about it? I grabbed the latest build of [URL] the new fork of OO (git download) and ran ./autogen.sh
bash-3.1$ ./autogen.sh
/usr/share/aclocal/nspr.m4:8: warning: underquoted definition of AM_PATH_NSPR
/usr/share/aclocal/nspr.m4:8: run info '(automake)Extending aclocal'
/usr/share/aclocal/nspr.m4:8: or see http://sources.redhat.com/automake/a...ending-aclocal
configure.in:13: installing `./install-sh'
configure.in:13: installing `./missing'
I then get a string of poor guesses, of which I enclose a few
bin/piece/Makefile.am:1: wildcard inst-*: non-POSIX variable name
bin/piece/Makefile.am:1: (probably a GNU make extension)
bin/piece/Makefile.am:1: wildcard post-inst-*: non-POSIX variable name
bin/piece/Makefile.am:1: (probably a GNU make extension)
desktop/16x16/Makefile.am:1: wildcard ooo-*.png: non-POSIX variable name
desktop/16x16/Makefile.am:1: (probably a GNU make extension)
It leaves little confidence that I am getting a good setup. My distro is slamd64-12.2 (An excellent first attempt) I did check the redhat page, but it may have as well been in Fortran or Perl.
View 2 Replies
View Related
Mar 17, 2010
My problem is to get postfix working with a smarthost, to send mails from home with dynamic IP, and which needs authentication. I did exactly the same with Slackware 12.2 (postfix 2.6.2) and it worked. Now I tried to do with 2.6.2 (actual running version is 2.7.0 with the same problem) on Slackware 13 64bit. Following error message occurs around every minute in the maillog:
[code]...
View 2 Replies
View Related
Nov 3, 2010
Whenever I install Fedora other distros don't show up in GRUB. Windows shows up in "other," and I can see the other distro still intact when I run G Parted, but I don't know how to get it to show up in GRUB. Is there a terminal-command in F14 that probes other OS's on the hard drive and restores them to GRUB?
View 6 Replies
View Related
Nov 20, 2010
I recently forced a reset on my applications menu, this system has been updated since at least Intrepid all the way through to Maverick and so I have decided to start having a bit of a clean up. Having deleted my ~/.config/menus directory and logged out/in, I noticed that I now have a menu for 'Other' within my applications menu, there must be around 200 entries in there, detailing every app I have ever installed through wine (whether they are still installed or not) along with a few others (VMWare player for one example).
Where are the files located that the computer probes to regenerate this menu? I'd like to clear the list as much as possible as the same list gets in the way when choosing what program a file should be opened with (it's far easier to choose from a list of currently installed apps than a list of 300 or so possibly installed apps).
View 3 Replies
View Related
Dec 12, 2010
I've just installed OpenSuse 11.3 on my new laptop but I've skiped the network configuration during the installation of system, but after that when I use the command : dhclient eth0 I'll be connected without any problem except when I reboot the system, I should retype the command to connect
View 3 Replies
View Related
May 29, 2009
I have an init.d script (dahdi-redfone) that works perfectly if you call "service dahdi-redfone stop" but for some reason when I reboot or shutdown it never gets called.Below in the listing of my rc6.d directory
# ls /etc/rc.d/rc6.d
K01dnsmasq K05anacron K20nfs K65dahdi-redfone K85messagebus K88auditd K90bluetooth K99readahead_early
[code]....
View 8 Replies
View Related
Sep 30, 2010
I have recently noticed that my HDD fsck during boot up (generally done after 30 mounts) is always skipped. A file system check has never happened. I don't remember if this is the case ever since I upgraded to Lucid or was it after I tweaked some settings.I am a learner who keeps tweaking some minor settings, so I am not sure if I have screwed up something.At boot I get the following message:
Code:
fsck from util-linux-ng 2.17.2
fsck from util-linux-ng 2.17.2
[code]...
View 4 Replies
View Related
Dec 15, 2010
I recently reinstalled my computer with new hard drives and Ubuntu 10.10 (AMD64). Before the switch I used the 'Backup' function in Evolution to backup all my email and email settings -- I thought! The backup file was big (300 MB) so I didn't double-check how big it should have been.
After the reinstall I restored the backup and Evolution seemed to be working fine, i.e., I could see all the new email in my IMAP mailbox. Also, my local Contacts were all there, as expected. But eventually I tried locating an old email which I had saved to a sub-folder under the 'Local' Inbox and realized that there was nothing there! Fortunately I still had my old hard-drive and so I was able to recover the additional 400 MB of old emails. Shouldn't the 'Backup' function include the entire Evolution profile including any/all 'Local' settings?
View 1 Replies
View Related
Jul 6, 2010
i just tried to install Ubuntu Netbook 10.04 on my old Amilo Lifebook P Series. But after the boot screen and the choice to install Ubuntu i get stuck at the Ubuntu screen with the little dots on the bottom If I hit esc i can see the warning (process 257): GLib-WARNING **: getpwuid_(r) failed due to unknown user id (0)
View 2 Replies
View Related
Oct 27, 2009
I put "%" before and after my username and name which gave the install an error. So I changed the username to one without the special character '%' but left the name with and the setup proceeded with an error and skipped the other three stages (sound testing, time, hardware setup). But everything seems fine with the install except I have not configured the sound card.
From what I have seen the install is pretty much fine other than the lack of functions which I obviously missed during the preference end section of the install. And so I was wondering is there a way to manually detect and use a easily configure a sound card or any way for that matter? The installation guide of Fedora 11 gives advice that was outdated 'system-configure-soundcard"(or something similar) has been removed since F9.
[Code]...
Currently have a few mixers installed which may be conflicting but the extra mixers were a symptom I created due to the no sound problem. The mixers are definitely not the major cause though. My onboard motherboard sound has not been set up as a module to be run is what I assume but any help would be great.
View 1 Replies
View Related
Aug 9, 2011
I have quiet splash disabled so I can see what boot processes are run on startup, and I notice that on every time I boot my computer the Firefox profile is skipped. Here's the message: Code: Skipping profile in /etc/ apparmor.d/disable: usr.bin.firefox,I checked /etc/apparmor.d/disable, and see that there is indeed a link to usr.bin.firefox. So I'm wondering how/why it got there. I haven't touched anything in AppArmor since my clean install of Natty.
View 6 Replies
View Related
Apr 8, 2010
i have cretaed RAID on one of my server RAID health is ok but its shows warning. so what could be the problem. WARNING: 0:0:RAID-1:2 drives:153GB:Optimal Drives:2 (11528 Errors)
View 1 Replies
View Related
Feb 28, 2011
after installation of a s/w for authentication from my ISP I couldnt launch the same and the following msg appears
pradipta@linux-auem:~> sudo sifyconnect
root's password:
pradipta@linux-auem:~>
(sifyconnect:5062): Gtk-WARNING **: cannot open display:
View 5 Replies
View Related
May 29, 2011
For example, the gparted application menu item doesn't work; using it means that there is almost no filesystem support. The only way to get it to work is to open a terminal, run 'su -', and then open it from there.As another example, I tried creating a nautilus script to open files as root with a command like this:
Code:
for uri in $NAUTILUS_SCRIPT_SELECTED_URIS; do
gnomesu -c "gnome-open '$uri'"
done
When I try using it, it just fails. Typing out the command in the terminal gives this (tested on a text file):
Code:
No protocol specified
(gedit:13672): Gtk-WARNING **: cannot open display: :0
I'm pretty sure the problem is that it's granting privileges, but not using the full root environment, or something along those lines.
View 2 Replies
View Related
Nov 28, 2009
I've just done a clean install of OS 11.2 x86_64, KDE 4.3.1, and got the following message from RPM while installing multimedia support files from Packman using zypper on the command line:
Code:
warning: /var/cache/zypp/packages/ftp.skynet.be-suse/noarch/rpmkey-packman-0.3.8-1.pm.1.1.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 9a795806 Similar messages were coming up while installing other packages through Yast, and I'm wondering what the issue is. All of the messages were about the "key ID" at the end of the example line. (Everything is working so I'm not sure if this is a problem or not.)
View 9 Replies
View Related
Mar 24, 2010
(exe:25667): Gdk-WARNING **: XID collision, trouble ahead
Why are some applications giving this message and what can I do about it?
View 3 Replies
View Related
Jul 27, 2010
I get an expired key warning every time I add a repo from the OBS. Creation/expiration dates are the same each time. This alway happens in the OBS, not Packman or elsewhere. I've tried cleaning the metadata and cache, and doing a rebuild with rpm. I've removed all of the existing keys associated w/OBS. Somebody know what this is about? I can't think of anything else to try.
Code:
New repository or package signing key received:
Key ID: 9584A164BD6D129A
[code]...
View 6 Replies
View Related
May 12, 2011
When I learn shell script, I want to add my own PATH variable to system previous variables. I find that my linux has the below PATH variables (in the end of this message). It shows 'No such file or directory' although I verify that all the directories exist. Some directories are empty indeed. This will result that warning?
I want to make the present PATH variables correct before I add mine.
bash: /usr/lib/mpi/gcc/openmpi/bin:/home/jeff/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/jvm/jre/bin: No such file or directory
View 9 Replies
View Related
Mar 23, 2010
what these information mean?What should I do to fix this?
(npviewer.bin:6947): Gdk-WARNING **: XID collision, trouble ahead
Shutting down nautilus-open-terminal extension
--- Hash table keys for warning below:
[code]....
View 1 Replies
View Related
Apr 19, 2010
I've installed BOINC for first time (from suse repos). I'm worried about running BOINC as root. How can this be avoided? I'd first like to exhaust all options with the official opensuse repo version of BOINC. If I am unsuccessful, then I'll try the version from Berkeley website.
View 13 Replies
View Related
Jun 9, 2010
I used xbindkeys and xvkbd to map my extra mouse buttons to page up and page down. With kde 4.4 it worked, but since I upgraded to kde 4.5 beta, I get the following error when xbindkeys starts:
Code:
*** Warning ***verify that there is not another program running which captures one of the keys captured by xbindkeys. It seems that there is a conflict, and xbindkeys can't grab all the keys defined in its configuration file. And for button press I get
Code:
Warning: Cannot convert string "-*-lucidatypewriter-bold-r-*-*-12-*-*-*-*-*-iso8859-1" to type FontStruct
Warning: Cannot convert string "-*-helvetica-bold-r-*-*-12-*-*-*-*-*-iso8859-1" to type FontStruct
[code]....
View 1 Replies
View Related
Oct 20, 2010
I was updating the files I have from packman on my test box and got security warning on mplayer and gixine. I switched mirrors and got the same checksum errors on a totally different mirror except I was not re-offered mplayer once I refused it the first time.
View 9 Replies
View Related
Dec 16, 2010
My document contains a parenthetical remark, like this:
(This is a long parenthetical remark.)
OpenOffice Writer advises me that the dot should rather be placed after the parenthesis:
(This is a long parenthetical remark).
I think OpenOffice Writer is wrong.
View 9 Replies
View Related
