I have an init.d script (dahdi-redfone) that works perfectly if you call "service dahdi-redfone stop" but for some reason when I reboot or shutdown it never gets called.Below in the listing of my rc6.d directory
# ls /etc/rc.d/rc6.d
K01dnsmasq K05anacron K20nfs K65dahdi-redfone K85messagebus K88auditd K90bluetooth K99readahead_early
[code]....
I want to shutdown my computer as if power was cut off (don't ask me why). How do I do this under Linux?
View 6 Replies View Relatedsee if there are differences between init 0 and shutdown -h now?
View 3 Replies View RelatedI have a service that when shutdown requires a username and password. I use `read` in my script to gather this info because I can't have it in the file. When I run the init script by hand it will ask for the username and password and everything shutsdown properly. When I run reboot or halt I get no prompt. get user input in a shutdown process?
View 2 Replies View RelatedIm having a bit of a problem with a init script which I wrote to start and stop oracle listener and database. My system is Redhat 5.4 64bit and oracle 10g2 standard database (64). I have created the script and added the script using
chkconfig add orashut, and on the script by chkconfig level 345 orashut on Now I can use service orashut start, stop, restart, and works fine and when the system comes up the database and the listener would come up as planed. But the problem is when I do a reboot or shut down the db or the listener would not shutdown as expected, I placed at K00 values as well in rc0.d and rc6.d to give the priority at the shutdown. Even though all the configurations say this script should run before everything else at the shutdown time this is not working.
When I bring down a certain machine with some nfs mounts using init 0, it hangs forever while trying to bring down the mounts, but if I bring it down using halt -p (which I've read just calls shutdown if I'm in init 3), it comes down in a timely manner. I've also read that shutdown still calls all the rc.d kill scripts just like init 0, so what is actually the difference between them? Is it this:
Quote:
All processes are first notified that the system is going down by the signal SIGTERM?Does init not do that? I'm not trying to directly troubleshoot why NFS makes me hang with init 0 at this point, just wondering why shutdown works whereas init 0 doesn't.
The first server I installed installed fine. The second server, installed with the same config, went to "kernel panic not syncing no init found try passing init= option in kernel" error. I tried reinstalling but it keeps going to that error after install reboot. The storage is ISCSI connected via Intel Server Adapter, which allows it to boot from ISCSI. Not sure if that's the cause for the problem, but the first server is connected to the same ISCSI and installed just fine.
Is there a way that I can make sure ISCSI module installs during installation? Although I think it is installed since it's able to copy the files and setup /dev/sda. I just wana make sure that it installs during setup.
I Downloaded the 6 CD's of CentOS installation , and I start install them on my machine :
Processor : Intel Pentium 4 -2.08 Ghz
Ram: 256 MB
cash :512kb
HDD: 80GB
(it is for home server purposes)
After the fourth disc the system ask to reboot the system ; so I restart it ok? What I get ? No OS. Just a long text :
I think the bootup run ok, then this line came out I think it reveal some thing that Pros will know it:
nash received SIGSEGV Backtrace :
[0x804fb35]
[0x488420]
[0x.........
[0x........
[0x......]
then
Kernel panic - not syncing: Attempted to kill init!
I've been dual booting 10.10 with Windows7 for about a month. Today is the first time I've encountered a serious problem.
This morning, nothing functioned properly after trying to open several programs. The computer seemed to be "frozen", although the mouse was working fine.
I decided to reboot, but then encountered an even bigger problem.
It failed to boot and got this message: no init found. try passing init= bootarg
The problem now is that it requires a Live CD session and I keep getting this: GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
In case it matters, I didn't install 10.10 from an ISO, I just upgraded from 10.04.
Ubuntu 9.10 will not boot! System froze this morning, I restarted and it is now failing to boot. Starts loading grub and I get this message:
mount: mounting /dev/disk/by-uuid/04aa3697-7bc0-45b5-b86a-77a1e6534bd5 on /root failed: invalid argument
mount: mounting /sys on /root/sys failed: no such file or directory
mount: mounting /dev on /root/sys failed: no such file or directory
[code]....
I booted with 9.04 LiveCD discovered the drive could not be mounted-ran fsck -ln and it told me the drive has no valid partition table. I have had intermittent problems mounting flash drives before this, so I'm kind of worried it might be a hardware issue.Also have files on that drive I would rather not lose, so reinstalling is hopefully a last resort.
From runlevel 3 as root, when I attempt to change to runlevel 5 by typing the command "init 5", I get the following error:Id "x" respawning too fast:disabled for 5 minutes
View 4 Replies View RelatedI am running Centos 5.5 with all the GUI stuff, including nx server and webmin.Sometimes while watching the bootup messages because my eyesight is very poor.I hit <ctrl s> to pause the output so I can read some details. If I do this late in the init sequence - it often briefly stops the output then the screen disappears under a blue wash (presumably something to do with the GUI login screen ot screensaver??)but the login screen never appears. Also it seems that the script never completes because the imap, webmin and http servers don't appear to have started.
I haven't found any satisfactory way out of it. I can't get back to a console terminal (I've tried ctrl c, d, z, etc.). As luck would have it the nx server has started so I can open an nx session. If I open a terminal in an nx session as root.I can't do a normal restart (shutdown -r now). Nothing happens presumably it can't run the init script because it is still running.The only way I have found to get the system back to life is to run "shutdown -r -n now" in the nx terminal session.There are probably better ways out of this predicament that I am unaware of. Otherwise it is probably somewhere between an annoyance and a bug. I would be interested in any advice the centos "board" may have as to whether this is worth raising as a redhat bug.
I am getting :
exec of init (/sbin/init) failed!!! : 2
umount /initrd/dev failed: 2
Kernel panic - not syncing: Attempted to kill init! My server is at remote end which I access through Public IP.
I had a LiveUSB of CentOS 5.5, so I decided the install it.With no installer,I just copied the files to my hard drive.his was in a multi boot with Windows 7, Ubuntu 9.10, and FreeDOS.I updated GRUB2 and it detected CentOS. I loaded my entry and it failed to mount the root filesystem.I took the initrd0 file from the LiveUSB syslinux folder and added that ramdisk to the entry. Now it finds the root filesystem (/dev/sda9 as Ext3).But it fails shortly after loading /sbin/init. It talks about an init error where it says "File not found!!!".The previous lines involved umounting old filesystems, like /dev.
View 4 Replies View RelatedAfter successful upgrading from 11.3 to 11.4 I had to install ATI driver from here Index of /mirror/ati/openSUSE_11.4 and delete the old ones. After rebooting the system entered in runlevel 5 where I received kwin error which I couldn't back-trace with the tools, but it was working. When I have made an on-line update and rebooted again it went to runlevel 3 without showing any error. When I type startx it shows error, but when I enter as root KDE starts normally and it's functional. how to get to the KDE with my account, but not as a root user?
View 9 Replies View RelatedI was unable to access the server and had to reboot it. When the server was booting after the Grub, it errored out withKernal Panic -not syncing Attempted to Kill init!!exec of init (/sbin/init/) failed No such directoryI reboot into the recuse mode from the CD and when looking for the installed OS.I got an error like thisFound OS but with errors.Mounting part or all of your system at /mnt/sysimage.. something of the sort. I've run fsk -y on the /boot and root drives and rebooted but still the same issues.Here is my grub.conf:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
[code].....
I got the following error after compiling kernel version 2.6.38.2 from sources with this Howto:[URL].. Creating root device.
Mounting root filesystem.
mount: could not find filesystem '/dev/root'
Setting up other filesystems.
Setting up new root fs
setuproot: moving /dev failed: No such file or directory
no fstab.sys, mounting internal defaults
[Code]...
me the difference between /etc/init.d scripts and /etc/init.d/rc?.d scripts.
View 3 Replies View RelatedI have recently moved over to opensuse 11.4 (never used any Linux before), I have installed all updates and am using the latest KDE. (I am using a laptop, not sure if this is relevant) I have found using the system fairly easy and found all the help I need either here, or out on the net. However, I cannot find much information about the above error message that I sometimes get. I have only noticed this error occasionally when I resume from sleep mode, or when I turn the computer off. I haven't seen the message anywhere else (pop up window, konsole etc) Sometimes the skipped probes is as high as 70, other times as low as 10. I don't know what it is scanning(?)
View 9 Replies View RelatedOpenSuse shows me this on boot:
Skipped Processes on run level 5 early xdm cifs nfs xdm
After successful upgrading from 11.3 to 11.4 I had to install ATI driver from here Index of /mirror/ati/openSUSE_11.4 and delete the old ones. After rebooting the system entered in runlevel 5 where I received kwin error which I couldn't back-trace with the tools, but it was working. When I have made an on-line update and rebooted again it went to runlevel 3 without showing any error. When I type startx it shows error, but when I enter as root KDE starts normally and it's functional. how to get to the KDE with my account, but not as a root user ?
View 9 Replies View RelatedI have installed the Apache Directory Server (ApacheDS) Now I need a iniscript that startining the App as Root, so that it can use the Port 389. After them a unprivileged User (apachds) should run the Service. The same solution I am searching for Glassfish. What can I use for them? RHEL and compatibles doesn't have a start-stop-daemon like Debian.
View 3 Replies View RelatedI have recently noticed that my HDD fsck during boot up (generally done after 30 mounts) is always skipped. A file system check has never happened. I don't remember if this is the case ever since I upgraded to Lucid or was it after I tweaked some settings.I am a learner who keeps tweaking some minor settings, so I am not sure if I have screwed up something.At boot I get the following message:
Code:
fsck from util-linux-ng 2.17.2
fsck from util-linux-ng 2.17.2
[code]...
I recently reinstalled my computer with new hard drives and Ubuntu 10.10 (AMD64). Before the switch I used the 'Backup' function in Evolution to backup all my email and email settings -- I thought! The backup file was big (300 MB) so I didn't double-check how big it should have been.
After the reinstall I restored the backup and Evolution seemed to be working fine, i.e., I could see all the new email in my IMAP mailbox. Also, my local Contacts were all there, as expected. But eventually I tried locating an old email which I had saved to a sub-folder under the 'Local' Inbox and realized that there was nothing there! Fortunately I still had my old hard-drive and so I was able to recover the additional 400 MB of old emails. Shouldn't the 'Backup' function include the entire Evolution profile including any/all 'Local' settings?
I put "%" before and after my username and name which gave the install an error. So I changed the username to one without the special character '%' but left the name with and the setup proceeded with an error and skipped the other three stages (sound testing, time, hardware setup). But everything seems fine with the install except I have not configured the sound card.
From what I have seen the install is pretty much fine other than the lack of functions which I obviously missed during the preference end section of the install. And so I was wondering is there a way to manually detect and use a easily configure a sound card or any way for that matter? The installation guide of Fedora 11 gives advice that was outdated 'system-configure-soundcard"(or something similar) has been removed since F9.
[Code]...
Currently have a few mixers installed which may be conflicting but the extra mixers were a symptom I created due to the no sound problem. The mixers are definitely not the major cause though. My onboard motherboard sound has not been set up as a module to be run is what I assume but any help would be great.
After the GRUB prompt, my boot process does not advance to the login GUI. It kicks me out to the console view of the boot process and ends with a text prompt for logging in.
I get the following message just before the "Welcome to OpenSUSE 11.1" line:
Skipped services in runlevel 5: nfs
what's happening and how can I retrieve the login GUI?
I have quiet splash disabled so I can see what boot processes are run on startup, and I notice that on every time I boot my computer the Firefox profile is skipped. Here's the message: Code: Skipping profile in /etc/ apparmor.d/disable: usr.bin.firefox,I checked /etc/apparmor.d/disable, and see that there is indeed a link to usr.bin.firefox. So I'm wondering how/why it got there. I haven't touched anything in AppArmor since my clean install of Natty.
View 6 Replies View RelatedI have written an init script and placed it in /etc/init.d/ directory.What I would like to know is, will the script run automatically or we need to install the script using "install_initd" command.If I have to invoke this command manullay, what will be the best place to do this ? Can I add this to "/etc/init.d/rcS" file
View 6 Replies View RelatedI'm trying to boot Emdebian lenny on my compact flash and it shows the following errors during boot time :
Code:
Mounting local filesystems ... done .
/etc/rc.d/S35mountall.sh : line 45 : uname : command not found .
[code]...
openSUSE 10.3 on Itronix IX260+ Stuck on command line, init 3, and all attempts at graphic init 5 fail. Get these messages:(EE) No devices detected; Fatal screen error: no screens found; AIGLX disabled Primary Device is PCI 01:00:0kernel:device-mapper:multipath round-robin:version 1.0.0 loaderkernel:device-mapper:table:253:0:multipath: error getting device
kernel:device-mapper:ioctl: error adding target to tableProblem would seem to be with the device-mapper, but have no idea how to fix it.