Ubuntu :: File System Check Is Always Skipped At Boot Up?
Sep 30, 2010
I have recently noticed that my HDD fsck during boot up (generally done after 30 mounts) is always skipped. A file system check has never happened. I don't remember if this is the case ever since I upgraded to Lucid or was it after I tweaked some settings.I am a learner who keeps tweaking some minor settings, so I am not sure if I have screwed up something.At boot I get the following message:
Code:
fsck from util-linux-ng 2.17.2
fsck from util-linux-ng 2.17.2
Vista Recovery Windows 7 GRUB Extended -->Fedora 12 (ext4)
so, I shrunk my recovery in Windows 7 successfully, and booted into my Fedora 12 live cd to run Gparted, and move the partitions so that the free space could go towards fedora, I did such, and then I couldn't expand the partition to my dismay. Next, I woke up this morning, tried to boot to fedora to run SSH, grub loaded, but when I tried to boot fedora, I got the "File system check failed" error, and when I tried 7, it just went to a blank screen with a single "_" in the top left-hand corner.
I've been stupid, and used kleansweep, which deleted a load of files and in the process killed everything. When I boot I get "file system check failed". Then it gives me a command prompt. I really don't want to have to reinstall ubuntu as I have a lot of stuff installed on it.
The server comes up after rebooting and after setting the hostname it starts setting up logical volume management. It says that 2 logical volume(s) in volume group "VolGroupOO" now active But then it starts to check the file system and errors with fsck.ext3: Device or resource busy while trying to open /dev/sdb1 [failed]
***An error occured during the file system check ***Droppping you to a shell, the system will reboot when you leave the shell Give root password for maintenace
After I log in with the root I get the message mesg: error tty device is not owned by group 'tty' Can the forum tell me how to troubleshoot this issue so I can boot back up again? I have 2 harddrives in this server and only 1 drive was detected when I first installed CentOS. The error first appeared when I mounted the 2nd drive at the mount point /UserGeneratedData. drive was formatted with ext3 before mounting and did not have any data on it I don't want any software RAID if thats what seems to be going on with "VolGroup00"
I have one hard disk for my root partition and a disk array on a separate mount point. I rebuilt my disk array, but I didn't delete my original mount points beforehand because I was hoping it would just "pick up". So now when I boot up, the OS tells me that the filesytem check fails because it can't find the array to map to the mount point. I know that I need to edit my /etc/fstab and remove the line that defines my mount point on the disk array. But it appears to be read only filesystem when I am in repair mode. I can't force the write with vi.
I have a Hp Netbook, and my friend installed Ubuntu to my computer. Everything was going fine, until one day my battery died while I was searching the web. I turned it back on and It started checking files and then it took me to a black screen with white letters saying "File System check failed".
A non techie friend has helped an even less techie friend by contacting me by email to discuss an ailing laptop. A few emails were exchanged, with more details, and it was not looking good because it seemed that suddenly the CD drive was not responding, nor any USB devices, the wireless icon was gone, but Ubuntu still seemed to work (for now), with wired ethernet also working. I was struggling to think of what could be done, with the favourite routes of Live CD and Live USB apparently gone.
After a few more hours - another email: 'It's now working! After so many reboots it checked disc for errors and repaired itself! Is there some way of doing that when needed anyway?'I see there is 'Disk Utility', and this would presumably fit the bill, but how does it do checks and repair when the damaged file system is being run, and is currently *mounted*? I thought utilities like fsck(?) could only be run on unmounted file systems? Have I misunderstood the disk utility fs check repair function? And anyway, what might be a good answer to my (nontechie) friend's question 'After so many reboots it checked disc for errors and repaired itself! Is there some way of doing that when needed anyway?'
For the record: (quote) It is a toshiba EA60-155 Model number PSA67E-00300C8J. He put in extra ram to install ubuntu. He thinks he may have deleted something! There is a 'trash' file on his USB drive with loads of stuff in it and he doesn't know how or why but because it won't now read the drive on her laptop we cant replace it! (end quote)
On my laptop I have a dual boot system, CentOS 5.4 on one partition and Windows Vista on the other. In Windows, I have a program installed that allows me to access my linux partition so I have access to the files. Every time I boot into linux after accessing the linux partition through windows, I get a forced file system check. I was wondering if there is a way to disable or perhaps bypass this check?
i have problem during boot my F11 , the problem is :
Code:
checking file systems /dev/sda7 : superblock last time ( etc... ) /dev/sda7: Unexpected inconsistency ;run fsck manually (i.e,without -a or -p option) ***an error occured during the file system check ***dropping you to shell:
An error occurred during the file system check, dropping you to a shell; the system will reboot when you leave the shell. Give root password maintenance (or type control D to continue)
Dual booting Mint 8 and Windows 7. Windows is reporting a file system error. I go into properties and check for errors, but since it's in use it asks me to reboot. I do, and grub comes up. I select windows and it just takes me to windows without checking the file system.
I've just upgraded to Natty. During the upgrade no errors showed. However, when I now boot ubuntu (either recovery mode or normal), the boot process hangs at:
'checking battery state'
I searched for similair problems in this forum, but the solutions in other posts(sudo apt-get update & upgrade etc.) did not help. I'm not sure if it is related or important, but when it hangs, it also shows something like:
I have Ubuntu 9.10 installed on my HP desktop, but I'm running an older version (8.10) on a live CD so I can at least get online to ask for some When I tried to log on earlier it went to a command prompt and said the 'file system check failed' and to run fsck manually. I entered 'sudo fsck' at the prompt and I selected "y" to fix all the bad inodes, when it was complete it told me to restart, I then entered 'sudo restart' at the prompt and it said 'sudo uuid unknown'. I have not installed anything recently and I'm not sure what to do.
A few days ago I upgraded my debian sid system, and since then systemd does a filesystem check on every boot which takes over two minutes, disobeying the existing settings I had. How can I set systemd to do a filesystem check only once every a set number of mounts, like I had set up before the upgrade?
I've just installed OpenSuse 11.3 on my new laptop but I've skiped the network configuration during the installation of system, but after that when I use the command : dhclient eth0 I'll be connected without any problem except when I reboot the system, I should retype the command to connect
Started slackpkg upgrade-up and went to bed. Woke up to find the power had gone out during the night. The computer booted up, but displayed a message that said something to the effect of, "Error occurred during root file system check. You will be given the option of doing maintenance......"I can get to a command prompt, but regardless of what I do a message pops saying it can't find libblkid.so.1
just start Ubuntu 9.04 said: File system chek failed a long is beging saved /var/long/fsck/checkfs if that location is writable Please repair the file systmen manually A maintenance shell will now be started Ctr+ D terminate this shell and resume system boot. Give root password for maintenance or type Control +D to continue. I did Ctr+D , and after login said , that can not find /home. I starte with the live cd:
So 2 days ago everything was all fine on my machine. Has been for about a month, but all of a sudden as of yesterday I have no sound, I am seeing IRQ interupts on boot, During boot I am seeing file system is not clean, , and swap space is being used for the first time while doing normal task, etc. These are 2 new hard drives in RAID 1 with ReiserFS. I should have used a newer FS but thats a whole other argument.
Anyways here we go. The system is Debian Lenny amd64 Physical RAM 4GB + 6GB swap /var/log/messages
Code: Feb 21 07:35:09 Sarah kernel: imklog 3.18.6, log source = /proc/kmsg started. Feb 21 07:35:09 Sarah rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="3994" x-info="http://www.rsyslog.com"] restart code....
My new system build is nearly complete and I will be formatting it in about an hour and installing the OS's. I am running a 64 bit quadcore system and plan to dual boot Ubuntu and Windows 7 Ultimate. However, I am torn on which filesystem to use.
I have been out of the PC craze for the past 2 years familiarizing myself with the mechanics and modifications of fast cars. Now that I have returned, much has changed that I am left to catch up with so I'm coming here for a quick answer.I am running a 1TB RAID 10 array, and do not want to split drivespace evenly for each OS. Which approach would a better idea? Should I use NTFS or EXT3? My plans for the machine are Ubuntu for everyday computing and any games that will run natively on linux.
Windows 7 will be reserved for any games that run on windows In fact, gaming is the ONLY reason I am not switching solely to a linux machine. Now, obviously each operating system and It's programs will be installed and run on It's own native filesystem NTFS for windows and EXT3 for Ubuntu. But I am torn as to which filesystem to store everything else on. Should movies, music and games be stored on an EXT3 or NTFS filesystem?curious as to the CPU utilization, access time and overall performance of both EXT3 from within windows and NTFS from within linux. Music and movies aren't really a concern but the one thing I would put emphasis on is how much would system performance be impacted when running a native linux game from within linux but on an NTFS filesystem? so, I am leaning towards EXT3 but what are the benefits of one over the other
i have installed ubuntu in my laptop,heres wat i didformat the drive and set 80g for /, 237gig for /home and 3gig for swapi have successfully installed it, i immediately look for updates and installed it.the update was successful, i restarted it then i installed nvidia driver.. and other applications i need like netbeans, mysql, cheese, sun jre and jdk..after those installations i have restarted my laptop but it wont boot my ubuntu and displays this message
Code: Mount of File System Failed. A maintenance shell will now be started.
I switch on the PC and it loads the Grub splash screen. However, it does not automatically boot the top entry after two seconds as it's supposed to and just hangs. I hit entry to boot it and it attempts to but after a few seconds gives me the error "unable to mount file system....a maintenance shel will be started" Where do I go from here? to figure out whats going on?
I'm using Ubuntu Lucid and any sudden power loss will usually cause problems with the file system. When I bring the computer back up, Ubuntu will then scan for errors at boot-time and if any errors are found it prompts me to select whether to repair or ignore them. I would much rather have it select the repair option automatically so that I don't have to be physically present.The reason for this is that i have a web server that should come back online automatically after a power loss.
I have ntfs partition installed bran new ubuntu system. I have some problem with unrar utf8 character zip files.Then i change my fstab file that uses files in D:ubuntudisks oot.disk and i added with out no fearless Code: ,utf8 and after all now i can't boot my linux system it does not allow me to change anything in fstab file. Although i use as a prefix sudo or as a root "sudo -i" commands I dont have any right to change it.
What file system should I choose for the data partition? If I go with ext3/4 it seems I can access them from Win7 using a file system driver, but it seems far from safe, from what google tells me. The driver installers aren't for Win7, and I need Ext4 without extents or an ext3-fs with an inode size of 128 to make it work at all. It saddens me to ask, but should I just go with NTFS?
I've been having a problem updating for the last few days. Everytime I try "yum update" it downloads the packages I need and when it tries to install them it stops because of this errors:Quote:
installing package kernel-2.6.31.9-174.fc12.x86_64 needs 5MB on the /boot filesystem installing package libuser-devel-0.56.13-1.fc12.x86_64 needs 5MB on the /boot filesystem installing package compiz-0.8.2-21.fc12.x86_64 needs 5MB on the /boot filesystem
I'm trying to install some updates and I get the following error message:Test Transaction Errors: installing package kernel-2.6.32.10-90.fc12.i686 needs 2MB on the /boot filesystemI have 60 GB freespace altogether. How do I increase the size of the /boot filestem?
