I have virtual XP set up with VirtualBox and I can't (been trying for a couple weeks now) to get an Internet connection on the VM. I have tried using NAT, bridged adapters and nothing.
View 1 RepliesI just installed Ubuntu 10.04 . Need to get my wireless router working on my HP laptop. Have been using a Linksys WRT54G Router with windows and it is working properly. Tried setting up in NetworkManager but it does not work.
When looking at things in the Ubuntu terminal it says the network is DISABLED.
I have tested several Linux Distros over the last weeks, and with all of them my DSL connection have been working out of the box (for intance Mandriva, Ubuntu, Mint). But it does not work on Dreamlinux, neither on Live CD or now where Dreamlinux is installed on my harddisk.
According to the guidelines provided by my Internet provider I need to use TCP/IP and activate DHCP. And make sure that PPPoE is not activated.
I see nowhere I can do this in Dreamlinux. In the controle panel i can run Wicd. Then I can chose to de-activate Wicd - this gives me an option of entering Adress, Networking mask, Gatway and Nameserver - for static ip it says - and this is the opposit of DHCP, right??
SO - what to do? Should I get a debian package or something? (Dreamlinux is using debian packages, as far as I could see)
I have a problem with my wired connection. The problem started when I tried and failed to install vmware virtual machine.... now I have no internet connection at all that I can see. This is output of:
ifconfig
eth0 Link encap:Ethernet HWaddr 90:e6:ba:97:64:f0
inet6 addr: fe80::92e6:baff:fe97:64f0/64 Scope:Link
[code]....
I have set up one of my linux box as link load balancer for two ADSL connection. After deployment, I have found out that instead of being fast, it has become slow. What I have observed that my request get out to internet but comes back intermittently. Is this a standard scenario ?
View 1 Replies View RelatedI am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies View RelatedI have just installed Linux Mint 8 Helena & it appears to be working well alongside my xp system. The problem I do have is setting up the much needed broadband connection. I have an adsl speedtouch330 usb modem, with tesco.net as my server, which works just fine on xp hence this mail. Am I missing something obvious, or have I got myself into depths much deeper & complex than I thought.
View 5 Replies View RelatedThe problem isn't with thew new computer but with my computer running Ubuntu. The problem is that I'm having trouble getting the Internet to work. Before the router I just plug my PC straight into the modem but now with the router I can't get on the Internet. I can get a connection to the router but no Internet. I know the it is not the router because I use my PS3 and it worked fine. I spend like an hour just trying to get the connection but can't figure out the Internet problem. What I did to get the connection is copy the ip address, Mac, and etc. from the PS3. Then I made a new connection and put the data in the IPV4 settings and it got a connection but I'm not sure if I did that right or just got lucky
View 2 Replies View RelatedI have successfully set up a cable internet connection in Ubuntu (created a new DSL connection by typing login and password and connected the cable - it worked). But I have no idea how I can set up a wireless internet connection.I have a wireless access point TL-WA501G, laptop and a cable internet connection with fixed IP address.My laptop can see the wireless access point. But I really do not know how to make it all work and what to start from.
View 2 Replies View RelatedI'm trying to create a PAN (Personal Area Network) using a laptop (Siragon ML-1040) and my desktop computer, but I get the Connection Refused (111) error.
Blueman doesn't detect any network service between the two computers unless I start PAND on one of them and then it detects the NAP service. That, only after I enable the NAP/Workgroup services on the Services submenu in Blueman. However, it doesn't work neither with the NM plugins or without them (dhclient and that other one I can't remember the name of).
Any clues over here? I'm using pand 4.91 and blueman.
I am new to Linux and Debian. I have Compaq Presario R3000 laptop, which is 5 years old now. I have RealTek RTL8139 family PCI Fast Ethernet NIC. Currently I have a broadband connection at home. I have dual boot Windows XP Professional and Debian (which I installed a week ago through CD). I have done some preliminary tests for the network and I am posting the screenshots for the tests (e.g. lspci, ifconfig, etc.). I also did two more commands. For 'cat /etc/network/ifstate' the output was 'No such file or directory'. Same output was for the command 'cat /etc/network/options'.
View 7 Replies View RelatedI'm trying to set up a wireless AP with Internet sharing. I currently have the AP setup with hostapd and a dhcp server. The clients can connect but there is not Internet sharing. Now my situation is somewhat uniqe in that my internet connection is my teathered android cell phone. The tether app is azilink and i use openvpn to create a virtual networking interface(tun0).
View 4 Replies View RelatedSo I'm wanting to learn a bit more about networking (ok, ALOT more), and I was thinking of trying to setup a virtual network via Virtualbox on my desktop, and as seperated from the internet as humanly possible (preferably no connection whatsoever).
Ignoring a few of the obvious problems (like my little dual core potentially running half a dozen VMs on 2G RAM), I am wanting some guidance as to what programs I would need or some documentation on setting things up.
I have no real clue where I would want to start with this, but I want it as a testbed for future toying with, to learn from, and just generally as something for me to hack at to see what does what, how, and why.
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
View 1 Replies View RelatedI seem to have is trying to get the internet to work. I can go to ..... ect but when I try to run playonlinux it says you do not seem to be connected to the internet, please post if you have anything useful, as I said I am very new to linux so be as detailed as possible.
View 4 Replies View Relatedi must make this work with the use of virtual pc's. I have vm player and installed fedora ( the latest version ) and one xp . So i have 2 virtual pc's. I'm making it simple for start so i can add more pc's when i see that it is working. I have setup a dhcp server at the fedora virtual pc. The fedora virtual pc is like a soho router. The xp pc is getting ip from dhcp while the fedora one has a static one.
My pc is behind an adsl router. Both virtual pc's can see each other which means i have no connectivity issues.Im trying to setup a squid proxy ( transparent one ) so for example the xp pc can access porn sites and such. I used all required configuration for the squid to work and started the service. Ive also inserted with iptables the commands to forward all incoming port 80 packets to port 3128 ( the squid ). It doesnt seems to be working and i thik i know why but i dont know how to fix it.
Because the xp has a gateway at 192.168.1.1 ( the adsl router ) packets go directly to it and not to the soho router ( fedora virtual pc as i intend to do) What can i do to solve this problem ? How can i forward all packets to go to the fedora virtual pc first and then the fedora pc to forward them (if necessary) to the adsl router? PS. I used Bridged connection on the networking configutration on the vmware player ! If you also want i can post the code for squid or iptables if needed !
I have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
View 5 Replies View RelatedTrying to set up a VPN connection from with Virtual Windows XP (virtualbox) and the network shows verifying user name and password but then times out and give me a message that it could not connect to the serve.
Since I could connect from a Windows system at another location, I assume there is something in Ubuntu that is preventing the connection so I tried to set up a VPN connection in Ubuntu.
I installed "network-manager-pptp" and "pptp-linux" as mentioned in the documentation but when I try to create a VPN connection using [main menu]>[System]>[Preferences]>[network connections] the VPN tab has a padlock on it. I set up the VPN but did not put a DOMAIN name on it because the server does not have a DOMAIN and it did not appear to be necessary on the dedicated Windows machine.
In spite of configuring the VPN connection, I cannot find the connection anywhere so I can see the server at the other end.
When I try to use [main menu]>[places]>[Connect to Server] using [windows share] and enter the IP number of the server, I get the message "Cannot display location smb:// {server IP address}"
And if anyone knows why the Virtual windows cannot connect.
I am a new ubuntu [ubuntu 9.10 desktop edition] user. I am having trouble setting up my internet connection. It used to be very easy to setup internet connection in windows xp. all i had to do is create a new lan connection and had to configure the internet protocol with the ip addresses. I am not sure what to do in order to get the connection working.
View 3 Replies View RelatedI'm unsure about what's wrong in my software setup for my wired DSL connection with my desktop tower-- I can't go to any website nor use apt-get even though Knemo and the panel icon say I'm connected to the Internet. My distro in one computer is sidux (version Mopoc)-- this is the distro that can't connect to the net; in my other computer my distro is MEPIS 8.5 which always connects to the net with the same wired DSL modem, a working wired Motorola DSL modem from my ISP, AT&T-Yahoo. When I want my MEPIS computer to be online I just change the ethernet wire plugged into the modem. [Both desktop towers stand together on a table.]
My ISP (AT&T-Yahoo) won't help me because they only help Windows users. [I only have and use Linux--> MEPIS and sidux.]With sidux, I have ceni to configure the network card which ceni says is a tg3 Broadcom NetXtreme BCM5702X gigabit. With ceni, I pick DHCP but don't know, for the class box, if I should pick "allow-hotplug (removable devices)", or "auto (built-in devices), or "manual". I also don't know what goes in "DNS search" box and what goes in the "DNS Nameservers" box. [With sidux, I also have pppoe-config but I think I'm supposed to use ceni because AT&T at least told me that the pppoe has already been setup inside the Motorola modem.] At www.dnsserverlist.org, I'm told that for my IP, the top DNS servers are 129.250.48.146 and 156.154.70.22. Are these the two strings that go in the "DNS Nameservers" box of ceni? I know these numbers change and I believe they translate the name of a website into the string of numbers for that website. Yes?
I have to ask all this here because there's really no good, detailed help for ceni in the sidux manual. [I had an older version of sidux successfully connected to this AT&T-supplied Motorola DSL modem in the near past, but then I got this newer version of sidux.] Also, man ceni really has no useful info.
I just installed Ubuntu 10.04 and am very excited about using it for the first time. I am very new to computers and stuff though so I don't have much of a clue as to what I'm doing. Although it installed fine, for my wireless connection it says "device not ready". What does this mean and how do I connect to the internet?
View 1 Replies View RelatedI set up a static IP address yesterday, following the instructions at the top of this page and since my machine no longer connects to the internet (although all other machines are connecting fine, so I know it's a result of this change).
View 6 Replies View RelatedI have removed Network Manager Gnome from my Ubuntu which is a virtual machine(Guest OS),I see the internet is no more running inside this Virtual Machine.While in other Virtual Machines (Other Linux) I had not removed Network Manager Gnomeand I see internet is running fine in them.
View 3 Replies View RelatedI am running Ubuntu (Karmic) and did the command: "sudo apt-get install ssh", In an attempt to download, install and setup OpenSSH. This installed both the client and server and during setup actually brought the daemon up and running as well. I then attempt: "ssh <myusername>@localhost" and it prompts me with a password. I enter the password, hit enter and immeditaly see the following results:
Read from remote host localhost: Connection reset by peer. Connection to localhost closed. I'm fairly certain that it is not on the client end as I can connect to other machines through ssh. I've tailed all the logs, messages, dmesg etc and nothing seems to be out of order, or even remotely related to shh or connections etc. My desktop machine had no (as in zero) issues installing and setting up OpenSSH, and connections can come and go as normal.
This has already been asked, and answered here: [URL] but there is one problem, this requires a window manager, and network-manager. I am using Ubuntu 9.10 Minimal with no window manager, and i want to recreate the exact effects of the second post in the above thread.
I have one desktop (Ubuntu 9.10 Minimal) with a USB wireless adapter (wlan1) and an ethernet port (eth0). I want my second desktop (also 9.10 Minimal; connected to desktop 1 via ethernet on eth0) to recieve the connection through desktop 1's wireless. I realize this is rather easy with network-manager, but I am not sure how to go about it through command line.
how to setup a broadband connection in Centos5.. My broadband connection is over a PPPoE link
View 1 Replies View RelatedSetting up an Internet proxy In the past I had set a computer to act as an Internet proxy. This would be multihomed, and running dansguardian, tinyproxy and firehol. Then webmin would be used as interface. By time I realised that this system is far from effective. Is there some other way to setup a proxy to be placed between users and the Internet? I would like (the admin) to be able to see in which sites users go and have a lot of control on access..
View 2 Replies View RelatedI have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.