OpenSUSE :: Printing From KDE Apps Causes Freeze?
Jul 28, 2010
OpenSuse 11.2 (64 bit) KDE 4.3.5
Printing from KDE no longer works. Opening a simple text file in Kwrite and attempting to print the document causes kwrite to hang. While Googling on this problem I came across this thread. The case is very similar.
[URL]
Running kwrite from the command line does not provide any information to diagnose this behavior. Printing works from Firefox and OpenOffice. Printers produce test pages ok.
This behavior came about after the HP C6380 stopped scanning. During my investigations I was forced to reinstalled hplip. This may have broken something.
View 5 Replies
ADVERTISEMENT
Mar 19, 2010
Sometimes when I type something to run apps on krunner (alt + f2) it gets freeze for about 10 seconds. I say sometimes but sure it happens most of times I use krunner. Other times I write it on but then the app doesn't come up until about 10 seconds...Does someone else have this issue on krunner? KDE 4.4.1, openSUSE 11.2.
View 9 Replies
View Related
Feb 11, 2011
Yes im refering to Windows Degrade and how over time windows just running will degrade and start causing errors. DLLs go missing and bizzare things. Ive seen wierd things happen on a windows machine that is dedicated to one function. Well to my point, recently I have been having many linux issues, not like normal or anything throughout the years I have experimented with linux though.
1)entering fullscreen on VMware crashes linux sometimes (no Ctrl+Alt or Ctrl+Alt+F2 ect)
2)using a different monitor haults the virtual machine while other monitors do not (I have 4)
3)Java apps freeze and require moving the window offscreen (below the screen) to redraw
4)general linux freezing
5)glitch with xinerama that repeatedly teleports mouse between two monitors causing the system to be unusable (no Ctrl+Alt+F2 or anything either)
At first I thought they were all related to VMware but they may not be. I run VMware everyday for my slingbox and light EXE-ing when wine isnt an option. So I may not be asking for fixes to all these problems but whats going on? Ive seen linux installs last years and believed linux to not degrade.
View 9 Replies
View Related
Aug 30, 2010
I'm experiencing random lockups. There are 2 types.1st time this happened when I enabled Kwin compositing effects. The screen turned black and it froze, the mouse pointer froze. Nothing would move. 5 Minutes later I just hard reset the Laptop. I was afraid something could be corrupted as it was shutdown in a bad way. On boot up Kwin's compositing effects were in place.Randomly working on the laptop, everything will freeze except the mouse pointer. This happens like once in a while though.I have a feeling this has something to do with my Dell Studio 1555 Intel GM4500 MHD graphics.
View 5 Replies
View Related
Jun 4, 2010
I have a Ubuntu 10.04 fresh installation on my HP laptop. Installation successful and boot OK. But the desktop randomly freeze. During freeze(about 15s each time), all programs are not responsive. Sometimes I can switch program by click, but program seems locked. How can I know which module cause the freeze?
View 4 Replies
View Related
Jul 28, 2010
We developed qt based application in linux. I wish to stop ejecting the paper after printing over.How to do it.
View 2 Replies
View Related
May 31, 2010
I expected more from ubuntu 10.4 with regards to printing with exact size photos and with poor auto colour printing but the situation remains unchanged! for instance .. the photo size configurations for ubuntu/fspot/gimp and others are not compatible with my printers (HP and Brother) .. here in Europe a typical standard size photo (10x15inches or 150x100mm are not even on the Ubuntu listing? I have tried all listed possibilities including "custom" (which does not seem to ever work correctly?)and the result at best is photos with uneven boarders or at worse my printer goes a bit crazy with much wasted photo paper and expensive ink ...even photos selected for "no boarders" still produces photos with the self same uneven boarders.
I have tried pretty much everything over time following advice in this forum and including using HPlip and updating drivers required for my Brother printer but the root problem seemingly lies with the Ubunto photo size setup listing. Working with Ubuntu over the years I have found that it can do pretty much everything that Windows can do except for this dam ongoing photo quality and configuration problem.
View 9 Replies
View Related
Jun 22, 2011
I recently installed opensuse 11.4 on a remote server. It has GNOME installed as a desktop. The problem I am experiencing is that when logged in through VNC, most of the GUI apps are not functioning, especially ones that require root privs. Example: The Add/Create users context does not function. After you supply root pw, nothing happens. If you launch it from a terminal, you see this:
jjmuw@g01:~> xdg-su -c /sbin/yast2 users
Xlib: extension "RANDR" missing on display "::1:1.0".
No protocol specified
No protocol specified
[code]....
(y2base:4872): Gtk-WARNING **: cannot open display: ::1:1.0
Followed by a hang. This is also affecting things like the Xen configuration contexts (creating/managing VMs).
View 5 Replies
View Related
Apr 30, 2011
Some minimized apps no longer appear in the top menu and by that are no longer accessible.For example firefox with the minimize addon or Jungel Disk backup service.How can I reach apps that minimized them self and are not shown in the top menu?
View 2 Replies
View Related
Feb 27, 2010
Here are my repos:
[Code]...
Since I use this for work, I don't want the DE to get unstable with updates, but want to do other updates like security updates. Should I disable the KDE Factory Desktop repos? How can I work this so everything updates without taking my KDE into 4.4.1 beta? I ask because I'm not sure yet what comes down through OSS, NON OSS, and Updates repos....or, if I can only do those. I'm just trying to make it dummy proof..I don't tend to break things in linux
View 3 Replies
View Related
Aug 3, 2010
i've had a problema with opensuse 11.3. Sometimes (3 times) the O.S. is freeze. STOP everything. And i had that shutdown with button. I think that the problem is with KDE, but i dont know.
View 9 Replies
View Related
Apr 11, 2011
Firefox 4 freeze in openSUSE-11.4? Mine freezes randomly, it seems, on opening links in new tabs. I don't think it's Flash as it happens on any web site, even without flash (e.g. like this forum). I've updated to the latest version from the Mozilla repo but it still freezes. The only option is to kill it and restart it. So I use Chromium at the moment. But I prefer Firefox.
PS I don't have any Firefox 4 problems in WinXP at work. And I think I haven't yet had a freeze on my Intel laptop or Atom netbook (maybe I haven't used them long enough), looks like it may be something to do with 64-bits (AMD)? But I may be wrong.
View 9 Replies
View Related
Feb 5, 2010
Anyone having trouble printing pages from opera 10.10 in opensuse 11.2.
View 5 Replies
View Related
May 20, 2010
opensuse v11.2 linux 2.6.31.12-0.2-desktop x86_64
We have a networked Kyocera cs-3050 printer. When I print something to it, the Print window hangs for about a minute while the printer process queries the printer. This would be acceptable if it did happen EVERY TIME I printed a document.
Is there some way to have the printer driver cache the information instead of asking for it every time?
View 9 Replies
View Related
Jun 22, 2010
This question is about the usage of lpr and/or lp.
My printer has 3 trays: #1 is the manual feed, #2 contains paper for the first page of a letter and #3 contains blank paper for the rest of the document. Most letters should be printed using tray#2 for the first page and tray#3 for all subsequent pages of the same document.
It is easy to select a tray for the whole document. The command looks something like:
Code:
lpr -o media=A4 -o media=Upper -Plp document.ps
but for the desired effect I have to prepare the first page (normally with dvips), print that, then prepare the rest and print it separately. This is not very elegant, because the job of another user may be processed in between of the 2 steps. Is there a better way?
View 8 Replies
View Related
Jul 20, 2011
I am trying to get network printing using IPP working, as per tutorial by Swerdna Linux Printer Sharing: Suse/openSUSE 10.x 11.x IPP Print Server for Linux & Windows Clients I used to have it working fine using openSUSE 11.1, then I upgraded to 11.4 and haven't been able to get it working since.
I can ping the server ok (ping 192.168.1.30) but cannot connect from web browser to [URL] it says "The server at 192.168.1.30 is taking too long to respond." This is the same from any workstation, Windows or Linux. The printer works fine locally on the server box. I noticed that Swerdna's tutorial (which I used successfully to setup this on 11.1) hasn't been updated for 11.2 upwards, I noticed that a couple of files that needed to be changed previously I don't even have in my current 11.4 version, ie /etc/cups/mime.convs and /etc/cups/mime.types. I'm wondering if these are replaced by something else now, and if that has any bearing on my problem.
View 1 Replies
View Related
Jan 10, 2011
i'm running openSUSE 11.3 32b and i have an issue. i'm running a webapp for my business that displays a lot of photos (~20MB/webpage) after 15-20 minutes of browsing the pages the ?display? adapter goes nuts ImageShack® - Online Photo and Video Hosting and when i'm switching from one page to another ff freeze for about 30-60seconds. i also test the app on fedora,ubuntu,windows but with none of those behaviours
View 9 Replies
View Related
Jan 31, 2011
I have read lots about KDE (4.xx) freeze on OpenSuse 11.3 Live. Well I have experienced it first hand.
My hard disk which had Opensuse 11.3 (reiserfs) crashed. It was a dual boot and a windows upgrade wiped out the partition information. I am still trying to resuce with dd-rescue.
Now in the meanwhile I burnt a opensuse 11.3 Live CD and worked on it for a week. I was bit annoyed that every too often the cd drive spins....so I decided to burn a usb stick. Its a 2 gb USB stick. I followed the instructions to the toto to burn the ISO image. Then my nightmares started
The USB STICK boot was smooth. However when the desktop starts ...the trouble begins. I clicked on firefox...after about 10 seconds I experienced the dreaded freeze first. I had to reboot the system.
Everything was fine till i started Firefox, the system froze. Now reboot -> start -> firefox --> freeze cycle continued. I got fed up.
I then downloaded google-chrome. Installed it (after updating a couple of drivers) . It worked flawless. I loaded it with graphics...still no problem. Then started firefox .. the system froze. I even disabled all KDE windows animation, set only one window pane, still there is a freeze.
I took my USB stick off and rebooted the system though live CD. I started firefox on boot, NO problems. Opened many many tabs. Still no problem.
So there is a SURE problem with USB + Firefox. I SUSPECT IT MORE DUE TO NETWORK ISSUES THAN GUI (DRIVER) ISSUE. If it were to be GUI driver issue firefox should have fozen both with CD and USB.
Mine is pentium duo processor machine with 2gb RAM (DDR2). Intel chipset for video. I checked the MD5 of downloaded ISO its matched the one on the site. So the iso image is flawless.
All the threads in this regard suspect the video drivers, but I ALSO suspect the network. May be there is a wait() state in the network driver that is holding the process for way too long causing the freeze. Somebody needs to check this up.
The freeze is on USB stick boot only and not on CD boot.
View 9 Replies
View Related
Feb 20, 2011
New PC, new OS win 7 and commercially created 11.3 freezes at install. Could it be ACPI.
View 9 Replies
View Related
Dec 26, 2010
I am a user of Ubuntu since 5 years, never had a problem like that before. (lot of install, update on many computers)Today, a friend, give me an old computer but it freeze with a fresh install of ubuntu if the hyperthreading is enable in bios. After 5 minutes or sometime less ... lost the keyboard, the mouse andnothing to do exept switch off !!The same computer never freeze with a fresh install of Opensuse 11.3 when the hyperthreading is on.I there any major difference between this 2 linux which could explain this ?Could someone help me to find the solution ?
View 9 Replies
View Related
Sep 3, 2010
Running openSuse 11.3 32 bit clean default install with a HP 2575xi connected via USB. Sometimes, printing fails halfway through the last page. The following shows in the CUPS error log file:
Code:
D [03/Sep/2010:17:15:15 -0400] [Job 30] Process 21943 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=2..."
[code]....
View 1 Replies
View Related
Jun 4, 2011
I'm having trouble with printing a PDF that is in landscape mode. When I tell Okular or Adoble Reader to print a document in landscape mode, the text is Illegible. If I tell it to print as portrait mode, then I can read the text but the end is cut off and there is no way for me to tell Okular or Adobe Reader what the margins are. That option was grayed out.
I'm having another problem: When I cancel the job from the CUPS interface, it says it canceled the job but the printer keeps going and finishes whether I want it to or not. With 11.2, I was able to have it set up so that when I told it to stop the printer, it did so right away. Why can't I get the printer to stop in the middle of a job if I see something wrong with it so that I don't have to waste ink?
View 9 Replies
View Related
Aug 23, 2011
I am having trouble printing both in Firefox 3.6.13 and Gimp 2.6.2. When I select File > Print in the menu, the print window appears. But the inside of the print window is almost empty, i.e. it does not show the list of printers available. When I try to close it, I get the message: 'The window with title "Print" is unresponsive. Do you wish to terminate this application?'.
After I click 'yes', in Gimp, I get the following error message: Plug-in crashed: "print" (/usr/lib64/gimp/2.0/plug-ins/print). But the main Gimp window does not disappear. In Firefox, after I click yes, program crashes altogether. I use OpenSuse 11.1, Linux kernel 2.6.27.21-0.1-mp, my architecture is x86_64. It's curious that I can still print using Konqueror, KEdit, or using lpr from the command line. Is it the problem with something beyond the applications themselves (Firefox and Gimp)?
View 1 Replies
View Related
Sep 7, 2011
Strangest thing happened today. I tried to print a simple text document from Kwrite and noticed it would not print. I tried it again selecting a different printer. No result. I tried copying the contents and pasting into Libre Office, then print...no printers to select...Odd. I decided to check on cupsd status from CLI. It was up. Here's where things get stranger. I open CUPS web manager and select printers...'No printers found' Okay, that's odd since I should have about 12, and they are showing up in Kwrite but not in LibreOffice nor CUPS manager.
Assuming Kwrite used some sort of cache I decided to check out /etc/cups/printers.conf....Hmmm zero byte file with but in the same directory a file printers.conf.O dated about 7 days ago. So I did an /etc/init.d/cups stop, did a cat printers.conf.O > printers.conf and /et c/init.d/cups start...all is back to normal. WTH?! What waxed all of my printers?
View 1 Replies
View Related
Jan 4, 2011
I have following setup on my one of the customer where we had suplly thin client. Customer have their old system with SuSE Linux Enterprise Desktop 10.2 with HP LaserJet P1008. They had configure this printer thru foo2xqx & HPLIP 2.8.10. Our Thin Client which we had supplied with SuSE Linux Enterprise Desktop 11.1 & HPLIP 3.10.2.
I am able to install HP printer on my thinclient but thru IPP but, when we fire any print command I am getting "Stopped: /usr/lib/cups/filter/foomatic-rip-hplip failed" error. If I can connect printer on thinclient I am able to print. But, thru IPP share I am not able to print. Also, customer have their old thinclient also on which they share this printer so, I am not able to detach this printer from that system.
View 3 Replies
View Related
Apr 21, 2011
I an an HP Pavillion laptop with SuSE 11.4. I had 11.3 working but I had to upgrade (install, not update due to other issues).
Now, when I go to YAST2 ->Hardware->printer->Print via network->Connection Wizard-> TCP Port and set the IP address and hit TEST CONNECTION I get an "OK". I select "Kodak" as the printer manufacturer and get these as my driver choices.
It uses port 9100 which looks open. I pick one driver and YAST creates the config. I then hit "Print test page" and nothing happens. This happens with either driver and a couple I downloaded from who knows where.
The printer is a Kodak ESP 5210 that runs with Windows 7 and Vista on the same network. Any ideas? Any tools I can use to sniff it out? I dropped the firewall to no avail, moved to the internal zone, no joy. It worked under 11.3 but I did not record the configuration steps or setup.
View 1 Replies
View Related
Jul 21, 2011
I am having issues printing to an hp laserjet p1006 printer. I tried to manually set up the printer using socket://10.0.1.1:9100 and a popup said user name and password.The printer listing said I needed to install missing plugins. So I deleted the printer listing and then installed the hplip-3.11.run without problems and let the installer open the printer port in the firewall. I do not get the same pop up, and it is still not printing. My box has a wireless nic and I run ./wlan0down then ./wlan0up to get the nic working after boot up. The printer is attached to an apple airport express and works with an imac wirelessly.
View 1 Replies
View Related
Mar 12, 2011
I installed openSUSE 11.4_amd64 on my system. All works fine but a lot of popular apps are missing from the repos. OpenSuse11.3 had them but 11.4 doesn't!I searched for apps like skype,isomaster,acetoneiso,openbravo erp,gsmartmon,smooth-task etc but didn't get any result. I have contrib and pacman repos enabled, still no luck...all the above mentioned apps were available in 11.3 then why not in 11.4..is it 'coz it released recently?
View 9 Replies
View Related
Mar 18, 2010
I just installed openSUSE 11.2 KDE via LiveCD on my desktop computer and have been loving it. The problem is that it will randomly freeze and requires a restart. I've tried booting up in safe-mode, but it still does it. Also, when it does, the screen flickers and flashes in and out before it freezes. And before anyone asks, yes, I have my NVIDIA drivers.
View 9 Replies
View Related
Jul 19, 2010
I've just installed OpenSuse 11.3 on my two Sony Vaio VPCF11Z1E machines (which have a Geforce GT 330M graphics card).Both machines appear to setup correctly and behave normally, but at seemingly random intervals (of the order of magnitude of 15-30 minutes) the whole system locks up for no readily apparent reason. I can still move the mouse pointer around the screen, but I cannot click on anything, and the whole keyboard is unresponsive (including any reasonable ctrl-alt-xxx which might normally help). The only way to get out of this seems to be to press and hold the power button to shut the whole machine off (which is not ideal!)
View 9 Replies
View Related
