OpenSUSE :: Printing From Different Trays?
Jun 22, 2010
This question is about the usage of lpr and/or lp.
My printer has 3 trays: #1 is the manual feed, #2 contains paper for the first page of a letter and #3 contains blank paper for the rest of the document. Most letters should be printed using tray#2 for the first page and tray#3 for all subsequent pages of the same document.
It is easy to select a tray for the whole document. The command looks something like:
Code:
lpr -o media=A4 -o media=Upper -Plp document.ps
but for the desired effect I have to prepare the first page (normally with dvips), print that, then prepare the rest and print it separately. This is not very elegant, because the job of another user may be processed in between of the 2 steps. Is there a better way?
View 8 Replies
ADVERTISEMENT
Jul 25, 2011
I am running Lucid Lynx 10.04.3. Sometimes when I boot the computer, my desktop icons are not there. I ended up looking for a solution, and found one:
1. Hit Alt-F2 and run gconf-editor
2. Go to apps/nautilus/preferences and check 'show_desktop'
However, show desktop was already checked. If I unchecked it, and then checked it again, the desktop icons appeared. Weird, but problem solved right? Wrong.
Sometimes when I boot, the desktop icons are gone again. This doesn't happen at every single boot though. When they are gone again though, I just have to go through the process again. Here's where it gets worse.
Also, sometimes at boot, both the top and bottom taskbars/system trays are completely gone, leaving just the desktop. Once again, this doesn't happen at every single boot. I can't really do anything, so I just reboot again and more often then not, things are back to normal. Or the trays are back, but the desktop icons are gone again.
The weird thing about this is it doesn't happen every time I boot the computer. So if there is a problem I just restart and things are usually fine again. However this is very frustrating, and NOT normal.
Also, because the default drivers for my NVIDIA GeForce MX4000 were not sufficient, I had to remove the Nouveau drivers and install nvidia-glx-96, which corresponds to the official NVIDIA Linux driver version 96.43.17. This is the latest driver version listed for my card on the NVIDIA website. I also had to downgrade from 11.04 because apparently the old drivers are not compatible with the new X Server version in 11.04. I don't know if this has anything to do with it or not. I'm wondering if maybe i should just get a newer card so I don't have to deal with the older drivers.
View 3 Replies
View Related
Jul 28, 2010
We developed qt based application in linux. I wish to stop ejecting the paper after printing over.How to do it.
View 2 Replies
View Related
May 31, 2010
I expected more from ubuntu 10.4 with regards to printing with exact size photos and with poor auto colour printing but the situation remains unchanged! for instance .. the photo size configurations for ubuntu/fspot/gimp and others are not compatible with my printers (HP and Brother) .. here in Europe a typical standard size photo (10x15inches or 150x100mm are not even on the Ubuntu listing? I have tried all listed possibilities including "custom" (which does not seem to ever work correctly?)and the result at best is photos with uneven boarders or at worse my printer goes a bit crazy with much wasted photo paper and expensive ink ...even photos selected for "no boarders" still produces photos with the self same uneven boarders.
I have tried pretty much everything over time following advice in this forum and including using HPlip and updating drivers required for my Brother printer but the root problem seemingly lies with the Ubunto photo size setup listing. Working with Ubuntu over the years I have found that it can do pretty much everything that Windows can do except for this dam ongoing photo quality and configuration problem.
View 9 Replies
View Related
Feb 5, 2010
Anyone having trouble printing pages from opera 10.10 in opensuse 11.2.
View 5 Replies
View Related
May 20, 2010
opensuse v11.2 linux 2.6.31.12-0.2-desktop x86_64
We have a networked Kyocera cs-3050 printer. When I print something to it, the Print window hangs for about a minute while the printer process queries the printer. This would be acceptable if it did happen EVERY TIME I printed a document.
Is there some way to have the printer driver cache the information instead of asking for it every time?
View 9 Replies
View Related
Jul 20, 2011
I am trying to get network printing using IPP working, as per tutorial by Swerdna Linux Printer Sharing: Suse/openSUSE 10.x 11.x IPP Print Server for Linux & Windows Clients I used to have it working fine using openSUSE 11.1, then I upgraded to 11.4 and haven't been able to get it working since.
I can ping the server ok (ping 192.168.1.30) but cannot connect from web browser to [URL] it says "The server at 192.168.1.30 is taking too long to respond." This is the same from any workstation, Windows or Linux. The printer works fine locally on the server box. I noticed that Swerdna's tutorial (which I used successfully to setup this on 11.1) hasn't been updated for 11.2 upwards, I noticed that a couple of files that needed to be changed previously I don't even have in my current 11.4 version, ie /etc/cups/mime.convs and /etc/cups/mime.types. I'm wondering if these are replaced by something else now, and if that has any bearing on my problem.
View 1 Replies
View Related
Jul 28, 2010
OpenSuse 11.2 (64 bit) KDE 4.3.5
Printing from KDE no longer works. Opening a simple text file in Kwrite and attempting to print the document causes kwrite to hang. While Googling on this problem I came across this thread. The case is very similar.
[URL]
Running kwrite from the command line does not provide any information to diagnose this behavior. Printing works from Firefox and OpenOffice. Printers produce test pages ok.
This behavior came about after the HP C6380 stopped scanning. During my investigations I was forced to reinstalled hplip. This may have broken something.
View 5 Replies
View Related
Sep 3, 2010
Running openSuse 11.3 32 bit clean default install with a HP 2575xi connected via USB. Sometimes, printing fails halfway through the last page. The following shows in the CUPS error log file:
Code:
D [03/Sep/2010:17:15:15 -0400] [Job 30] Process 21943 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=2..."
[code]....
View 1 Replies
View Related
Jun 4, 2011
I'm having trouble with printing a PDF that is in landscape mode. When I tell Okular or Adoble Reader to print a document in landscape mode, the text is Illegible. If I tell it to print as portrait mode, then I can read the text but the end is cut off and there is no way for me to tell Okular or Adobe Reader what the margins are. That option was grayed out.
I'm having another problem: When I cancel the job from the CUPS interface, it says it canceled the job but the printer keeps going and finishes whether I want it to or not. With 11.2, I was able to have it set up so that when I told it to stop the printer, it did so right away. Why can't I get the printer to stop in the middle of a job if I see something wrong with it so that I don't have to waste ink?
View 9 Replies
View Related
Aug 23, 2011
I am having trouble printing both in Firefox 3.6.13 and Gimp 2.6.2. When I select File > Print in the menu, the print window appears. But the inside of the print window is almost empty, i.e. it does not show the list of printers available. When I try to close it, I get the message: 'The window with title "Print" is unresponsive. Do you wish to terminate this application?'.
After I click 'yes', in Gimp, I get the following error message: Plug-in crashed: "print" (/usr/lib64/gimp/2.0/plug-ins/print). But the main Gimp window does not disappear. In Firefox, after I click yes, program crashes altogether. I use OpenSuse 11.1, Linux kernel 2.6.27.21-0.1-mp, my architecture is x86_64. It's curious that I can still print using Konqueror, KEdit, or using lpr from the command line. Is it the problem with something beyond the applications themselves (Firefox and Gimp)?
View 1 Replies
View Related
Sep 7, 2011
Strangest thing happened today. I tried to print a simple text document from Kwrite and noticed it would not print. I tried it again selecting a different printer. No result. I tried copying the contents and pasting into Libre Office, then print...no printers to select...Odd. I decided to check on cupsd status from CLI. It was up. Here's where things get stranger. I open CUPS web manager and select printers...'No printers found' Okay, that's odd since I should have about 12, and they are showing up in Kwrite but not in LibreOffice nor CUPS manager.
Assuming Kwrite used some sort of cache I decided to check out /etc/cups/printers.conf....Hmmm zero byte file with but in the same directory a file printers.conf.O dated about 7 days ago. So I did an /etc/init.d/cups stop, did a cat printers.conf.O > printers.conf and /et c/init.d/cups start...all is back to normal. WTH?! What waxed all of my printers?
View 1 Replies
View Related
Jan 4, 2011
I have following setup on my one of the customer where we had suplly thin client. Customer have their old system with SuSE Linux Enterprise Desktop 10.2 with HP LaserJet P1008. They had configure this printer thru foo2xqx & HPLIP 2.8.10. Our Thin Client which we had supplied with SuSE Linux Enterprise Desktop 11.1 & HPLIP 3.10.2.
I am able to install HP printer on my thinclient but thru IPP but, when we fire any print command I am getting "Stopped: /usr/lib/cups/filter/foomatic-rip-hplip failed" error. If I can connect printer on thinclient I am able to print. But, thru IPP share I am not able to print. Also, customer have their old thinclient also on which they share this printer so, I am not able to detach this printer from that system.
View 3 Replies
View Related
Apr 21, 2011
I an an HP Pavillion laptop with SuSE 11.4. I had 11.3 working but I had to upgrade (install, not update due to other issues).
Now, when I go to YAST2 ->Hardware->printer->Print via network->Connection Wizard-> TCP Port and set the IP address and hit TEST CONNECTION I get an "OK". I select "Kodak" as the printer manufacturer and get these as my driver choices.
It uses port 9100 which looks open. I pick one driver and YAST creates the config. I then hit "Print test page" and nothing happens. This happens with either driver and a couple I downloaded from who knows where.
The printer is a Kodak ESP 5210 that runs with Windows 7 and Vista on the same network. Any ideas? Any tools I can use to sniff it out? I dropped the firewall to no avail, moved to the internal zone, no joy. It worked under 11.3 but I did not record the configuration steps or setup.
View 1 Replies
View Related
Jul 21, 2011
I am having issues printing to an hp laserjet p1006 printer. I tried to manually set up the printer using socket://10.0.1.1:9100 and a popup said user name and password.The printer listing said I needed to install missing plugins. So I deleted the printer listing and then installed the hplip-3.11.run without problems and let the installer open the printer port in the firewall. I do not get the same pop up, and it is still not printing. My box has a wireless nic and I run ./wlan0down then ./wlan0up to get the nic working after boot up. The printer is attached to an apple airport express and works with an imac wirelessly.
View 1 Replies
View Related
Jan 23, 2011
In December I finally filled up my root partition and broke Suse 11.1. I therefore resized my partitions and installed Suse 11.3 on /root. I didn't not touch my /home partition.
Last week I had a paper jam in the printer. This has been cleared and as far as I know the printer is now fine. However the printer will not print. In url, it says printing has been paused, but I cannot find resume printer/printing anywhere.
I have tried Google, but the instructions do not appear to match where I would find 'resume printer'.I am able to provide further information.
View 3 Replies
View Related
Feb 14, 2011
I recently loaded Inkscape on my 11.3/kde4.6 system.I have Inkscape 0.48 loaded, had same issues with 0.47. Program functionality is fine, except for printing.When attempting output to either a laser or inkjet, the output has excessive margins and appears to be formatted for A4, not letter. The print drivers are set for US-letter.I have seen references to Inkscape using gtk-printing or gnome-printing. I do not see packages with this specific naming available via yast.The printers work fine from GIMP, OpenOffice, etc.I also have loaded Inkscape to Win32 box, open file from 11.3 box, and have similar issues, margins seem set to large offsets, but there is no place in the page setup to set margins.My solution so far has been to save to PDF, then print from Ocular, which does work, just cumbersome.
View 2 Replies
View Related
Jun 6, 2011
I have hp and samsung printers HP L3000, HP P1320,P2035,P2015 and Samsung ML750. Now when i like to print a landscape doc from libre office and i select landscape orientation but still the report comes in portrait format.even if i go to cups n change printing orientation from auto to landscape I still not get a landscape report.Another problem is that in windows I selected the row in excel to print then printed using fit to one page.But in suse I dont see that option
View 1 Replies
View Related
Jun 24, 2011
Whenever I want to print from Libre Office, it's default printer options are somehow set to duplex long edge (standard) and the print quality is set to economy. I want this changed to Duplex Off and print quality set to standard. I've tried setting Libre Office's printer settings (File > Printer Settings) and when that failed, I went to File > Templates > Organize > Commands button and selected Printer Settings and changed them from there. None of these worked.
Whenever I open a document, the print quality is always set to economy and duplex is on (even when it is not needed). I have to keep changing it each time I print a document. I allow my children to use this computer for homework at times and I don't want them to have to mess with the driver settings all the time (more of a chance for something to go wrong or be set incorrectly). I've also checked the printer settings from within YaST and they are all ok.
I did try changing the settings from within the CUPS interface but when I did that, I could no longer print. The system couldn't connect to port 631 anymore and I had to go into YaST again to make it reconnect to the printer port. BTW, when I looked just now at the default printer settings within CUPS, everything seems to be set right, duplex is set to off and print quality is set to standard, which is what I want. Why does Libre Office seem to be ignoring these settings? How can I fix this (easily I hope)?
View 9 Replies
View Related
Oct 28, 2010
I have a Panasonic 3123 dot matrix printer which I am trying to get working on my Dell Vostro 420 running 11.3 (x64). Since Dell decided to eliminate on board parallel ports from their systems I've added one with a Startech PCI1PECP PCI card (uses a NETMOS NM9805CV chipset). I've confirmed that the printer works using an old laptop running Windows 2k with a LPT port running in ECP mode. When attached to my desktop the printer will (usually) shift the pin carriage etc when I perform a cold boot but will not respond when sent a test page in yast or cups (it is detected after a fashion and I have assigned the appropriate ppd from the Omni package).
The following is the relevant out put from lspci, lsmod and dmesg:
Code:
05:00.0 Communication controller: Device 1710:9805 (rev 01)
Subsystem: LSI Logic / Symbios Logic Device 0010
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- .....
Code:
E [28/Oct/2010:11:59:44 -0400] Unable to bind socket for address ::1:631 - Cannot assign requested address.
E [28/Oct/2010:12:05:04 -0400] Unable to bind socket for address ::1:631 - Cannot assign requested address.
E [28/Oct/2010:12:08:52 -0400] [cups-driverd] Skipping "/usr/share/ppd": loop detected!
View 9 Replies
View Related
Nov 2, 2010
I have an HP C4795 printer and lately when I print something nothing happens until I reboot and then the printer will print. How can I fix this problem? This was printing from Okular pdf reader.
I'm running openSuse 11.3 KDE 64 bit.
View 7 Replies
View Related
Apr 9, 2011
I am not sure if this is the right place for this or not, but I am having a problem getting my HP6300 series all in one printer to print photo's with proper colors, all colors seem to run. I have hplip installed and set up to print photo's and it still prints colors like runs instead of correct.
View 9 Replies
View Related
Apr 22, 2011
Both my printers can't print more that one page on the row whatever the application I use.
I used to have a all-in-one printer HP PSC 1510 that I installed without any trouble.
A few days ago, I've got another scanner-printer HP 1050 that I tried to install on the same laptop in order to use it in another place. I had to take the new version of HP-lip, since 11.3 did not provide the right driver. I just printed the test page and it seemed okay.
Then, I upgraded from 11.3 to 11.4. And I had to print a long document. Only the first page was displayed correctly. All the following pages are more and more mixed up. It prints allways the same paragraph with big dark lines...
Following to cup, the drivers in use are :
Deskjet_1050_J410 : HP Deskjet 1050 j410 Series, hpcups 3.11.3a
PSC-1500-series : HP PSC 1500 Series, hpcups 3.10.2rc1.9
But the trouble is the same for both printers.
I can't guess if it comes from HP-lip or from my upgrade.
View 9 Replies
View Related
May 5, 2011
The Printer works when printing Test Pages.
I want to print an image on GIMP and, in the General TAB, appears:
Status -> /usr/lib/cups/backend/hp failed.
View 1 Replies
View Related
Apr 6, 2011
I have a Lexmark 736DN printer (color, 2-sided printing). With openSUSE 11.3, there was non specific driver to pick during printer installation: I picked up "Lexmark C772dn Foomatic/Postscript" and everything was fine (at least I didn't notice problems). With openSUSE 11.4, there's no such a driver! Even more, the list of drivers for lexmark is a lot, lot shorter than the list present in 11.3. C772dn is not present so i picked up "Lexmark 4076 - CUPS + Gutenprint v5.2.6": but there is no color option and non double sided printing! what's up? Maybe I miss a rpm with printer's drivers (not installed by default)?
View 7 Replies
View Related
Jun 19, 2010
if have a problem with a K8A78LM Mainboard from AsRock. If I try to print something, the mashine freez. A echo "Hello World" > /dev/lp0 send only 2 or 3 chars to the Printer.
View 1 Replies
View Related
Oct 17, 2010
openSUSE 11.3 (64bit)
The printer is plugged in via usb and I'm using the PIXMA MP220 driver (closest # to the model). Printing manager detects status of the printer, however, nothing will print.
Under "Print Self-Test Page" and "Clean Print-Heads" I get this: 'client-error-document-format-not-supported'
Under "Print Test Page" it indicates the job is processed and finished, but nothing happens.
I've found several errors concerning this, but being unfamiliar with CUPS, I'm not sure where to start troubleshooting.
View 3 Replies
View Related
Mar 20, 2011
I already noticed that others had similar problems with other Samsung scanner / printers. I could not find any solution in any threads (other than going back to 11.2 or buying a printer from a different vendor), so I'll ask again here: I'm running openSuse 11.3 on a 64 bit system.
Here's some error log output from CUPS:
E [20/Mar/2011:15:22:35 +0100] [Job 62] Failed to load the PPM image
E [20/Mar/2011:15:22:35 +0100] [Job 62] Job stopped due to filter errors; please consult the error_log file for details.
D [20/Mar/2011:15:22:35 +0100] [Job 62] The following messages were recorded from 15:22:34 to 15:22:35
[code].....
View 1 Replies
View Related
Apr 10, 2011
Just configured a new printer, an Oki B410d and have a problem with the automatic double-sided printing:it will only print with the "long-edge flip", no matter if I mark the "short-edge" option. This is very annoying, since I have to print lots of booklets on horizontal A4 paper, and reverse pages are printed upside-down! I'm using the "OKI B4000 / B400 / MB400 PCL" driver from Okidata web page.
View 5 Replies
View Related
Apr 7, 2010
I want to print from my linux box to my win7 pc that has a shared printer. I have cups installed and tried to add pritner using samba, but was unsuccesful, gave me an error when trying to add. The guide i followed is: Yet another Linux to Windows printing tip -- Debian Admin The printer model is a dell 2330d laser printer, it is not in cups, so i added the ppd file i got off the dell support site. I am aware that there is a native suse driver, but i want to print to the windows printer.If possible I would like to know how to do this via command line instead of the GUI.
View 9 Replies
View Related
