OpenSUSE Install :: Booting The LiveCD From An USB Stick?
Jan 26, 2011
-I could use a hand in installing opensuse on my 2009 Intel Macbook
-I need to use a USB stick for the install, my optical drive doesn't work.
-I am trying to reformat my macbook to run 64-bit opensuse 11.3 instead of Apple's proprietary operating system, OS X
-So I started here: Chapter1.Installation with YaST
-And in this article, under section 1.1. Choosing the Installation Media, i found this sub-section: Booting the LiveCD from an USB Stick.
-So i followed those steps to create a bootable USB stick in Terminal, and i got an error in Terminal and was unable to go any further;
-this was the error in Terminal: dd: bs: illegal numeric value
Would anyone know what the error means, and what i should have typed instead? Is it because my USB stick is generic instead of being a specific type like a U3 stick?
View 9 Replies
ADVERTISEMENT
Feb 7, 2010
I am getting a "No devices matches MBR identifier 0x8c71ad6e!" message along with a reboot in 120 seconds message. This occurs after kernel load and at the start of openSUSE boot.
I have tried both the 64bit and 32bit downloads
openSUSE-11.2-KDE4-LiveCD-i686.iso
openSUSE-11.2-KDE4-LiveCD-x86_64.iso
I have checksum checked both images after download. I have attempted the install on CD and USB stick with both images and the result is always the same.
I've included a screen image on my site: No Devices Matches MBR Identifier | Badzilla
View 5 Replies
View Related
Aug 17, 2011
I have been trying to create a live CD or DVD with kiwi, and following the instructions from Portal:KIWI - openSUSE All went well with the building and creation of the ISO image, but when I try to boot it I get:
Failed to mount ext3 clic container Failed to mount root filesystem if I press Alt-F3 (suggested in the terminal)the top most error is tune2fs: Attempt to read block from filesystem resulted in short read while trying to open /read-only/fsdata.ext3 Couldn't find valid filesystem superblock. Something I did find was that it may not have permission to use tune2fs.I haven't done any fiddling with the template supplied with kiwi.
View 1 Replies
View Related
Mar 31, 2010
I'm completely new to all things linux.
View 1 Replies
View Related
Jul 30, 2009
Coming from Windows. First installed Fedora 11 but lost network and haven't been able to restore network connectivity. Attempted to re-install but during the boot process it complained about creating a soft link to /dev/root (not sure what this is about). So attempted to install CentOS by booting from the LiveCD. Much nicer interface but have no install icon and there doesn't appear to be installation guide. How I can install CentOS?
View 4 Replies
View Related
Nov 9, 2010
I recently had to reinstall windows on another partition on my hard drive due to there not being any good way to run unrealed under ubuntu (believe me, I've tried everything) Is there a way to install grub from windows without using a liveCD or booting to a USB? I have downloaded WINGRUB and to be fair I have no clue how to use it.I no longer can access my Ubuntu partition.
View 1 Replies
View Related
May 31, 2011
I seem to have a knack for having systems built that OpenSuse doesn't like. I remembered this afternoon why I gave up on 11.x - the 11.4 LiveCD doesn't like my setup, at least in terms of booting into a GUI. I have uploaded two photos I took of the bootup screen, in case the provide information that might be helpful. I am sorry about the shakiness, I have CP and the the 2nd one is harder to read because of that, but it says something about "amd radeon hd 6800 series (chip ID 0x6738) requires KMS" among other things.
Even though I'm really rusty in CLI, I'm happy to give it a go, to get this working, if possible. The two screenshots are [URL]
FWIW, the 11.4 LiveCD also really didn't like the NVIDIA GeForce 7000M / nForce 610M in my old Acer Aspire 5520 either.
View 9 Replies
View Related
May 4, 2010
I formatted my old laptop's HDD completely to install openSUSE with a clean slate plus it couldn't handle XP anymore. I burnt a liveCD and NET CD but none of them boot (not at all) and since its my first experience with Linux I am puzzled. I get this message that operating system could not found (well there is none) and it suppose to boot from the CD I triple checked the boot priority I burnt extra CD's but nothing seem to work.
View 9 Replies
View Related
Jan 20, 2011
for the past couple of weeks, I have been booting from an Ubuntu LiveCD. Here's why: When I boot my computer (emachines E528 laptop), it gets to the BIOS loading screen (the one where you have the option to press a function key to get to the BIOS settings), then it goes to a black screen and looks like it is going to load GRUB, but instead of loading GRUB, the computer reboots. It does this endlessly, unless I insert a LiveCD. So, it's not the BIOS. That's good. When the Mint GUI (Linux Mint was the LiveCD I was originally using as I just happened to have it on hand) loaded for the first time, I checked all of the hard drive partitions and they all seemed to load fine. So, it's not a mechanical problem with the HDD. That's good.
At this point, I figured the MBR had become corrupted somehow. Now I wasn't really sure exactly where the MBR was, or how it all worked, but I was pretty sure that if I just reinstalled GRUB, everything would be hunky dorey. Unfortunately, I hit a road block when trying to install GRUB. That's not good. I am trying to follow the instructions in this thread, but I get the following error:
Code: grub> find /boot/grub/stage1
Error 15: File not found So then I tried following the instructions here, but I don't know how to tell which drive is sda1, sda2, etc. I'm guessing there's some terminal command to figure it out, but I don't know it and Google was less than helpful. I feel like something that basic should be easy to find, but I digress.
At this point, I am getting very close to backing up everything and reinstalling everything. Only problem with that is that I am not sure how to access the files on my Ubuntu partition as they are encrypted (I wrote down the key when I started it up, I just don't know how to bring up a prompt that will let me enter the key). I really don't want to reinstall and set everything back up, but if I have to I will.
So, I guess I just need to know how to tell which partition is associated with which sda#, or how to access the files in my encrypted Ubuntu home folder, or (hopefully) someone who can tell exactly what's going on from why I have posted and can give me instructions for fixing my problem. Also, here's a breakdown of how my hard drive is partitioned. Not sure why, but I thought this might be helpful: linky.
TLDR: How do I tell which partition is associated to which sda#? How do I open my encrypted home folder from my Ubuntu partition? After reading my whole post, is there any further insight you could offer that I may have overlooked?
View 4 Replies
View Related
Jun 21, 2011
I downloaded the CentOS-5.6-i386-LiveCD.iso and burn it on a CD, as usual. When booting, it does the automatic boot but then crashes, with "Buffer I/O error on device sr0, logical block 354800 (and more)". I am having the same problem with making a boot-able USB. I am not exactly sure what is wrong, I see two folders on the cd LiveOS and isolinux. I'm not sure if it is suppose to be like this, if the burning process when ok. I'm trying to set up a desktop on a pc (with AMD Sempron processor). This is very strange, I ruled out that it couldn't have been my computer (because my Fedora boot disk booted fine), my cd (because it is new and an entirely different brand), or the .iso (because I tested it in VirtualBox, which it booted perfectly).
Files in LiveOS folder:
livecd-iso-to-disk
osmin.img
squashfs.img
TRANS.TBL
[code]....
View 14 Replies
View Related
Sep 15, 2009
I am trying to make a liveUSB(my DVD drive run out monthes ago), I use this iso image: openSUSE-11.1-KDE4-Reloaded-LiveCD.x86_64-4.3.1-Build4.1.iso I just cp the file in the iso into the usb, and cp the L : ootx86_64loader*.* into my usb, mv the isolinux.cfg into syslinux and run with syslinux command to install the bootloader. and boot with my usb drive,get Error: .. Loading device nodes with udev Boot logging started on.
... No devices matches MBR identifier: 0x5b265f15 reboot Exception: error console at Alt - F3/F4 ...
View 7 Replies
View Related
Jan 22, 2010
I recently downloaded the i686 11.2 and right before it seems as though the Live CD is going to load, with the cursor and the black screen present, it takes me straight to 'linux login'. It states that runlevel 5 has been reached, the failed services in runlevel 5 are postfix and the skipped services are nfs if that's of any significance. I have no idea where to start; looking around it looks as though this is a graphics card issue. My laptop has Intel X3100 integrated video. How can I manage to get the LiveCD working?
(Also, if let it sit at the login for a while, it says "usr/sbin/stop_preload: line 4: /usr/bin/killall: Input/Output error)
View 9 Replies
View Related
Jun 20, 2010
I've decided to try openSUSE again, but I'm having trouble with the LiveCD. I've tried both "linux" and "root" which has been mentioned in many places but neither works.
View 7 Replies
View Related
Aug 5, 2010
I've installed OpenSUSE with both DVD and liveCD. When I'm in Open SUSE booted from the CD/DVD, my wireless usb is recognized and I can connect to the network using the icon at the bottom right bar. When I install Open SUSE to my hard drive, my wireless usb seems not to be recognized and I'm not offered to connect to a wireless network.
View 3 Replies
View Related
Sep 6, 2010
I'm having very strange issues with OpenSUSE 11.3 KDE LiveCD, mainly performance-wise. Most noticeably, it takes 10-30 minutes to actually boot the system, and it doesn't matter whether the LiveCD is booted from the USB or if it's install into the hard disk. There aren't any noticeable errors during boot, though, except a few "timeout" errors and not being able to lauch VirtualBox Guest Additions (which I don't need since it's not run from VirtualBox anyway).
It takes the most time during the "scanning USB devices" section if I boot from the USB, and during the state where it detects the network card/assigns an IP. In both cases, every dot that appears there takes around 2 minutes. During the boot, the PC seems to be mostly idle, and appears to do something only occasinally, when certain parts of the boot sequence are passed, so that makes boot up feel "jumpy" - nothing happens for 10 minutes, then the PC starts accessing the HDD, then nothing happens for 10 more minutes.
There are other performance problems, noticeably during installation to HDD (through the Install option from the CD startup menu - it's quite a bit faster when started from the running LiveCD). For instance, it takes around 5-10 minutes to make the screen where you need to choose the language and keyboard layout responsive. The performance, in both cases, seems to be inconsistent - sometimes it starts booting and responding quickly, the other times it's really slow, up to the point of outright hanging.
System specs:
CPU: AMD Phenom II X4 925
4GB RAM
HDD: WD Caviar Black 640 GB
GPU: ATI Radeon HD 4890
View 9 Replies
View Related
Oct 17, 2010
Is it possible to make a personalized version of ubuntu livecd that autostart ssh after booting? I need to test if video card failure cause my computer to freeze.If that's too complicated or not possible, is there any other livecd that does that?
View 2 Replies
View Related
Feb 17, 2011
I just built a computer with these specs:
Asus P7P55D-E Pro Mother Board
2 x 4gb GSkill RipJaw 1333
Intel Core i5-760 cpu
MSI nVidia GeFore GTX-460 Video Card
When I try to boot from a live CD/USB I always get some sort of kernel panic, most times about USB controllers and other times about cpu_idle. I have pictures of these that I can post but nothing from any logs because this is happening even before I install. I have left memtest running over night for 11 hours and had no problems, I have tried to boot with only one stick of memory, I have changed the video card to a GeForce 8800 and I have tried everything on a different motherboard and still no luck. Would I wrong to say that there is a problem with the CPU and should I return it? My only problem with all of this is that Windows installs perfectly fine on the computer with zero problems...weird.
View 1 Replies
View Related
Aug 12, 2011
I have a system without a cd reader so i dd'd the livecd iso (I'm stuck with 7.10) to a partition. I can boot the system with grub4dos by loading the kernel and ramdisk. Is there a kernel parameter I can append so I can change the keymap like I was able to by pressing F3 in the cd boot menu?
View 2 Replies
View Related
Jan 20, 2010
I am trying open suse for the first time and i want to install it on a usb stick this it is the latest version
View 9 Replies
View Related
May 15, 2010
I have an Acer Aspire One Netbook. Everytime I try to "burn" the live 11.2 GNOME CD to an USB drive (1GB) it fails on boot. I've tried unetbootin, the application from pendrivelinux.com as well. When it boots, it usually can't find the image. So I have to type in the name of the image by hand then press enter. I actually type the below in:
boot: openSUSE_Linux_(GNOME)
So it starts loading the image in text mode. I don't mind this, except it stops when it tries probing for the CD/DVD ROM.
rebootException failed to detect CD/DVD or USB drive
It just stops pass there. I've tried to add in the options acpi=off, but do I add it in before or after I enter in the image name? BTW, it doesn't boot in my laptop either.
View 1 Replies
View Related
Oct 16, 2010
openSUSE-11.3-Addon-Lang-i586.iso and openSUSE-11.3-GNOME-LiveCD-i686.iso
Index of /distribution/11.3/iso
And what is openSUSE-11.3-Addon-NonOss-BiArch-i586-x86_64.iso ?
View 1 Replies
View Related
May 14, 2011
I can not porpperly boot into live CD. I get the option menu in beginning and when i select the liveCD option it starts loading the kernel and then screen gets garbled. full of very small dots. Its liek the graphics card is not recognised propperly. I've read about similar issue here: ATI Radeon HD 3650 AGP boot problem
but as i see the user's specific problem in taht thread was caused by having an AGP card and on an older version. however my card is PCI. it should boot normally. i haven't tried nomodeset parameter mentioned in that thread, but the card shouldn't need it anyway.
View 5 Replies
View Related
Dec 22, 2009
How would I go installing Fedora to a USB stick and then booting from it?Does my BIOS have to support booting from a USB stick? because I don't think I have an option for that.So can someone explain to me how installing to and booting from a USB stick works?
View 2 Replies
View Related
Jul 11, 2011
I have done a big big mistake (I could beat myself up for that) with my netbook and now I am sitting here, not getting openSUSE installed on it.
I wanted to try another netbook linux and installed (more by accident than intentionally) Easy Peasy Linux. This system is not bad, but cannot work with the wireless adapter in my netbook. However, I then wanted to install openSUSE 11.4 again, which ran fine on the netbook. But the install always gets stuck in different stages and I donīt know why.
Sometimes a failure message comes up: "filesystem is read only, rebooting in 120 seconds", but I am not really sure if this is for the harddrive or the usb stick. In other occasions, the bootprocess until install gets stuck at "starting KDM". Nothing happens then... thats it.
I already have reformatted the usb stick and copied the openSUSE Live CD via Imagewriter on it again... no success.
So now I am really confused, because I donīt know if there is something wrong with the harddrive? Or is it the stick itself? How can I find this out?
If it is the harddrive, how can I at least refomat it? Remember: no CD or DVD drive, just USB stick...
How can I find out if the image on the stick is ok? I already tested the install media and it said: "checksum ok"
View 9 Replies
View Related
Oct 3, 2010
Process and problem description:
1. downloaded ubuntu-10.10-rc-desktop-amd64.iso and burned to CD.
2. re-booted.
3. "ubuntu" is displayed center screen with five dots below text (sequencing white and red).
4. screen jumps to alternating horizontal bars (green & purple plus green & pink sections) about 1/4 inch high.
5. cd activity light stops blinking.
6. no standard desktop ever appears.
System:
- Asus A8N-VM CSM with integrated nVidia C51PV [GeForce 6150] display
- AMD Athlon(tm) 64 3200+ CPU
- 2.5GB DDR 333 MHz memory
Has anyone else run across this? Obviously, trying to convince a friend to switch to ubuntu using this CD would not be good.
View 6 Replies
View Related
Feb 11, 2011
I have a NVIDIA Geforce 6150 LE video card and it is on the motherboard. I vaguely remember something on some site about nvidia cards, but can't remember what. It gets to the part where it says something like "Boot Ubuntu from the CD." I hit enter and it shuts my monitor off.
View 9 Replies
View Related
May 10, 2011
When booting from the LiveCd it starts to load but never loads! All it does is flash a _ icon and then becomes black!
View 9 Replies
View Related
Jan 31, 2011
I have read lots about KDE (4.xx) freeze on OpenSuse 11.3 Live. Well I have experienced it first hand.
My hard disk which had Opensuse 11.3 (reiserfs) crashed. It was a dual boot and a windows upgrade wiped out the partition information. I am still trying to resuce with dd-rescue.
Now in the meanwhile I burnt a opensuse 11.3 Live CD and worked on it for a week. I was bit annoyed that every too often the cd drive spins....so I decided to burn a usb stick. Its a 2 gb USB stick. I followed the instructions to the toto to burn the ISO image. Then my nightmares started
The USB STICK boot was smooth. However when the desktop starts ...the trouble begins. I clicked on firefox...after about 10 seconds I experienced the dreaded freeze first. I had to reboot the system.
Everything was fine till i started Firefox, the system froze. Now reboot -> start -> firefox --> freeze cycle continued. I got fed up.
I then downloaded google-chrome. Installed it (after updating a couple of drivers) . It worked flawless. I loaded it with graphics...still no problem. Then started firefox .. the system froze. I even disabled all KDE windows animation, set only one window pane, still there is a freeze.
I took my USB stick off and rebooted the system though live CD. I started firefox on boot, NO problems. Opened many many tabs. Still no problem.
So there is a SURE problem with USB + Firefox. I SUSPECT IT MORE DUE TO NETWORK ISSUES THAN GUI (DRIVER) ISSUE. If it were to be GUI driver issue firefox should have fozen both with CD and USB.
Mine is pentium duo processor machine with 2gb RAM (DDR2). Intel chipset for video. I checked the MD5 of downloaded ISO its matched the one on the site. So the iso image is flawless.
All the threads in this regard suspect the video drivers, but I ALSO suspect the network. May be there is a wait() state in the network driver that is holding the process for way too long causing the freeze. Somebody needs to check this up.
The freeze is on USB stick boot only and not on CD boot.
View 9 Replies
View Related
Apr 30, 2011
I'm currently having troubles upgrading my 11.1 system. My SuSE running 11.3 had crashed, and when I tried to reinstall it I couldn't find the cd. I only have a 11.1 distro cd, in which I had installed. I want to upgrade to 11.2 since that should be the easiest, from then I think i can figure out how to upgrade from 11.4. I currently do not have any cd's or a usb flash drive to mount the iso image onto. I've read through the wiki looking for a solution, but even with updating my repos i still haven't found the answer.
how to upgrade from 11.1 to 11.2 without a cd or usb stick.
View 1 Replies
View Related
Mar 30, 2009
I finished downloading of "openSUSE-11.1-KDE4-LiveCD-i686.iso" file. I downloaded it by Opera WB. Then using Nero I burned this file to CD. But there is a problem with boot. Please, make a support to this problem. Maybe file, which is in a site opensuse.org is damaged?
After the reboot of computer this text appears:
ISOLINUX 3.63 0x49364136 Copyright (c) 1994-2008 H. Peter Anvin
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Loading
Invalid or corrupt kernel image.
boot:
View 7 Replies
View Related
