OpenSUSE Install :: Unable To Boot LiveCD From USB On Netbook
May 15, 2010
I have an Acer Aspire One Netbook. Everytime I try to "burn" the live 11.2 GNOME CD to an USB drive (1GB) it fails on boot. I've tried unetbootin, the application from pendrivelinux.com as well. When it boots, it usually can't find the image. So I have to type in the name of the image by hand then press enter. I actually type the below in:
boot: openSUSE_Linux_(GNOME)
So it starts loading the image in text mode. I don't mind this, except it stops when it tries probing for the CD/DVD ROM.
rebootException failed to detect CD/DVD or USB drive
It just stops pass there. I've tried to add in the options acpi=off, but do I add it in before or after I enter in the image name? BTW, it doesn't boot in my laptop either.
View 1 Replies
ADVERTISEMENT
May 4, 2010
I formatted my old laptop's HDD completely to install openSUSE with a clean slate plus it couldn't handle XP anymore. I burnt a liveCD and NET CD but none of them boot (not at all) and since its my first experience with Linux I am puzzled. I get this message that operating system could not found (well there is none) and it suppose to boot from the CD I triple checked the boot priority I burnt extra CD's but nothing seem to work.
View 9 Replies
View Related
Sep 6, 2010
I'm having very strange issues with OpenSUSE 11.3 KDE LiveCD, mainly performance-wise. Most noticeably, it takes 10-30 minutes to actually boot the system, and it doesn't matter whether the LiveCD is booted from the USB or if it's install into the hard disk. There aren't any noticeable errors during boot, though, except a few "timeout" errors and not being able to lauch VirtualBox Guest Additions (which I don't need since it's not run from VirtualBox anyway).
It takes the most time during the "scanning USB devices" section if I boot from the USB, and during the state where it detects the network card/assigns an IP. In both cases, every dot that appears there takes around 2 minutes. During the boot, the PC seems to be mostly idle, and appears to do something only occasinally, when certain parts of the boot sequence are passed, so that makes boot up feel "jumpy" - nothing happens for 10 minutes, then the PC starts accessing the HDD, then nothing happens for 10 more minutes.
There are other performance problems, noticeably during installation to HDD (through the Install option from the CD startup menu - it's quite a bit faster when started from the running LiveCD). For instance, it takes around 5-10 minutes to make the screen where you need to choose the language and keyboard layout responsive. The performance, in both cases, seems to be inconsistent - sometimes it starts booting and responding quickly, the other times it's really slow, up to the point of outright hanging.
System specs:
CPU: AMD Phenom II X4 925
4GB RAM
HDD: WD Caviar Black 640 GB
GPU: ATI Radeon HD 4890
View 9 Replies
View Related
May 14, 2011
I can not porpperly boot into live CD. I get the option menu in beginning and when i select the liveCD option it starts loading the kernel and then screen gets garbled. full of very small dots. Its liek the graphics card is not recognised propperly. I've read about similar issue here: ATI Radeon HD 3650 AGP boot problem
but as i see the user's specific problem in taht thread was caused by having an AGP card and on an older version. however my card is PCI. it should boot normally. i haven't tried nomodeset parameter mentioned in that thread, but the card shouldn't need it anyway.
View 5 Replies
View Related
Nov 17, 2010
I have windows 7 and I'd like to install opensuse 11.3. I have tried with liveCD, live usb, live dvd, but when I click installation, it shows "kernel loading", and when it finishes the loading, all I get is a black screen. Sometimes, when I try with the live CD method it reboots and the same happens again.
In my other computer with XP installed inside, it works immediately. I have tried to change video mode to text and vesa mode, also I have typed "acpi=off noapic edd=off" in the boot options line, but it didn't worked.
The black screen appears not only for the installation option, but also when I choose boot live CD, and check installation media. By the way, I have checked the downloaded iso with md5 checker, and it's the right file.
View 9 Replies
View Related
Nov 22, 2010
I tried a LIVECD from Artistx: ArtistX - eXtra ordinary art tools Index of /mirrors/artistx And now my computer boots up into a kernel command line screen instead of the GUI type screen where I enter my name and password. Anyone know what this ##$%@ disk changed on my computer and how do I get it back to normal? Fail safe mode boots ok. On the LIVECD disk I selected boot from hard drive which worked but after I turn off my computer and restart, it goes back into that command line sign in screen and stays there.
View 9 Replies
View Related
Jul 5, 2010
I am certain that the problem is not with the CD. It can boot on my laptop. It's the RC2 of OpenSuse 11.3 Gnome. When I try to boot on my PC, I get the error "No devices matches MBR identifier: 0x502eadc3".I had some problems when installing Ubuntu, with HDD partitioning because it's SATA3. I tried several things, chandged from IDE to ACHI in Bios, then after it didn't work I simply plugged out all of the Sata cables but still the same. It should be because of Bios settings I guess.I have Gigabyte X58A-UD3R mainboard. Please help, I really love OpenSuse
View 5 Replies
View Related
Jul 29, 2010
I burned the live version of OpenSUSE 11.3 (Gnome, 32bit) to a CD to test the compatibility of an HP Pavilion p6510f. Although Xubuntu 10.4 booted up fine, OpenSUSE did not. A message about RAID would appear (too briefly to read) and then the computer would reboot.I checked in the BIOS and found that the SATA drive has 3 modes: IDE, RAID and AHCI. The hard drive was set to RAID.
When I changed the hard drive mode to IDE, I was able to run the OpenSUSE live CD; but the change ruined my Windows installation. Windows doesn't boot under IDE or RAID mode. (I have reset the mode to RAID and am restoring the Windows installation.) Is there an option/argument that I can pass to the kernel so that OpenSUSE will work under RAID mode? (Since Xubuntu 10.4 was able to do it, I'm assuming OpenSUSE should be able to.)
View 9 Replies
View Related
Mar 5, 2011
Basically this morning, I decided to format my Win7 as it was getting really slow and I did so with no problems. I also have a Linux Mint OS on dual boot. Since I was springcleaning my windows partition, I decided it was a good idea to do the same to my linux partition.
I downloaded the latest version of Linux Mint (Julia) and burned the LiveCD. Now here is where the problem lies, when I restarted Windows and chose to boot from the LiveCD, it didn't work. No joke. There was just a little underscore blinking for a long time before it went back to GRUB which prompted me to select an OS to boot.
However, when I went into my old Linux Mint OS and restarted the machine, the LiveCD worked... to a certain extent. It would load and look as though it was ready to install Linux Mint 10 but the moment it got to the option screen, the whole screen turned into a checkered and jumbled mess.
At this point I thought it was the LiveCD or the .iso file. I had an Ubuntu LiveUSB for recovery purposes and I tried that. The exact same thing happened. Can't boot the LiveUSB if I restarted from Windows, but works when I reboot from Linux. BUT still the same checkered screen that doesnt respond.
Did a bit of googling and reckoned it might be something wrong with my GRUB. Did some updating and didnt make a difference.
Then I tried the Super Grub Disk and STUPIDLY uninstalled GRUB. (Note that booting to SGD had the exact same problem - can't be done if I rebooted from Windows). Now I can't access my Linux Mint 9 cos the the bootup screen (mbr) only has Windows 7 as an option.
Remember me mentioning that I can't boot from any CD/USB/recovery CD when I reboot from Windows? And now that I can't access Linux, there's no way for me to do any form of recovery!
I've tried using the command prompt utility at startup recovery but to no avail.
View 3 Replies
View Related
Apr 7, 2011
I re-installed my Windows OS today and wanted to install Linux Mint as a dual boot. Before the reinstall, I used the LiveCD Gparted to expand my C: from 25 to 30 GB. All went smoothly.After the fresh Windows install, I went ahead and installed all the hardware drivers and other programs I need. Now I don't seem to be able to boot from LiveCD successfully.On booting from CD Rom, it goes up until the screen with the Linux Mint logo and stays there (I tried giving it time, waited an hour and nothing).Thinking something was wrong with the CD, I tried booting a USB drive. Used Linux Live USB creator to use the same .iso file to boot from. It seems to 'freeze' at the same point.
Formatted the drive, and installed UNetbootin and used the same .iso file. This time, booted it in compatibility mode. A few commands flashed by (links to pictures below), no idea what it means. I've taken a picture, maybe you can tell me what it means? This is the only lead I have to figure out what went wrong (Even if I don't want Linux installed, booting with Live CD to recover data is invaluable)
Pictures I took of the messages in compatibility mode:
[URL]
P.S: I don't know if this is important but I thought I'd mention it. I was in Gparted (in the LiveCD) when the screen froze. I had to hard boot the laptop again, and I haven't been able to get the LiveCD to work since.
View 3 Replies
View Related
May 11, 2009
I downloaded Fedora 10 LiveCD, then stick it in to my computer. It seems to start up nicely, but then I get this error:
Loading vmlinuz0..........
Loading initrd0.img...........
.......ready.
This kernel requires the following features not present on the CPU: cmov
Unable to boot - please use a kernel appropriate for your CPU.
View 3 Replies
View Related
Sep 21, 2010
I have a MacBook Pro 6,2 that try as I might refuses to boot from live CDs. I have rEFIt installed, and both of the liveCDs I've burnt for 10.10 (32 and 64 bit) do not show up either in rEFIt or when I hold down "option" as my mac boots.
Both CDs will run perfectly as either liveCDs or Installations in Parallels, but I'm looking to (hopefully) someday replace Mac OS entirely with Ubuntu. Being completely unable to see these liveCDs presents a bit of a problem though..
View 5 Replies
View Related
Jul 8, 2010
This might sound like a really daft question but how the hell do I install CentOS 5.5? I cant find any guide how to install the dam thing. I ve downloaded "CentOS-5.5-i386-LiveCD-Release2.iso" & burnt this to a CD. I then booted my server form this CD. I see a very nice colourful screen which says "Automatic Boot in 10 seconds". After 10 seconds nothing happens. I then rebooted the server & this time I hit the enter key, I now see a menu with the following options:
Boot
Boot (text mode)
Network Instillation
Memory Test
Boot form local drive
If I try the "Boot" or "Boot (text mode)" options nothing happens. Selecting the Network Instillation appears to boot the install I then see a blue & red screen asking me to choose a language I picked English hit OK selected UK as the keyboard type hit OK Installation ethod...... Ive chose Local CDROM but the message says: The CentOS cd was not found in any of your CD drives.
View 3 Replies
View Related
Dec 6, 2010
I was playing an online game and my netbook, previously running XP, somehow got a virus. The next morning when I turned on my netbook, the screen showed the normal Toshiba BIOS screen, and then went black, only showing a blinking white cursor in the top left corner of the screen.
Right now I'm on my netbook running on a thumb with 10.10 on it. When I try to install 10.10, after rebooting (and setting the BIOS settings back to the hard drive instead of the thumb), the screen goes black like before. If I boot from the thumb drive though and instead of installing, I select the "try ubuntu" option, I'm able to run my netbook as I am now. In the top left corner I have the "install ubuntu-netbook 10.10" option available.
I ran the boot info script and here's what I've got:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Syslinux is installed in the MBR of /dev/sda
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
[code]....
View 3 Replies
View Related
Aug 18, 2010
Dual Booting my laptop and unable to change the Boot Records on the drive. Not because I dont know how, but my primary OS will fail to boot(win7).
I have drive partitioned as follows...
sda1 = Win7 system (default install)
sda2 = Win7 Main (default install)
sda3 = swap
sda4 = Extension (I think thats what its called)
sda5 = / (ext4)
What I need is a boot cd or perferably Grub installed on a 256MB Thumb drive with the options to load the installed system from sda5.
View 4 Replies
View Related
Nov 5, 2010
On a Lenovo thinkpad S12 2959 and a kingston DataTraveler 101 OK I have been having a lot of strange issues while trying to install the current 10.10 netbook version of Ubuntu.I followed the instructions right below the download for the iso.Basically download the usb live creator and use it.So I did (with no persistence set) and it seemed to work.I tried booting from it and it worked, except that I have to keep pressing keys, I used the enter key and it worked.If I stop pressing enter no progress is made.Then at the end their is some error about no persistent space being available.
and now it is booted, so I try to install a driver and it hangs.so I try to install the OS, and it hangs.So I try to exit and it finally gets to the next screen in the installation after I tell it to exit, but then hangs when trying to get the the next one and it will not continue.
View 5 Replies
View Related
Jan 31, 2011
I have Fedora 14 installed on my laptop (Installed with few issues) and I'm trying to install ubuntu on my desktop. I had ubuntu 10.04 installed before on a second (250gb) hard drive (Windows 7 on the other 1TB drive) with a few issues and kinda screwed a few things up trying to upgrade to 10.10. So, I said screw it, and downloaded the live .iso for 10.10 (x64) and burned it to disk. I boot from the live CD and choose the install option to use entire 250Gb disk. I choose my options, including to download updates and install 3rd party software and let the install run its course. Everything seems to be going fine and it asks me to restart. So I say yes, the disk pops out and the screen goes dark... and then nothing happens. The computer's still on but hasn't restarted yet. I hit the del key (Which I use to enter BIOS) and the computer finally restarts. I enter BIOS and tell it to boot from the 250Gb HDD, save and exit. However, it gets stuck at the point where it (It, I assume to be the motherboard) says "Loading Operations System ..." and with a blinking cursor on the line underneath. Nothing happeneds.
I tried again just this morning using the same procedure. I'm once again stuck at the "Loading Operating System .." screen.
EDIT: After poking around a bit more, I remembered I was confronted by a GRUB menu when I booted into Windows 7 HDD. So, I selected Linux from the menu and all seems good. Does anyone know why this is? It's very odd, well at least to me. Why would GRUB be on the windows hard drive? Is this something I should be concerned about?
View 2 Replies
View Related
Jul 3, 2011
I want to install Fedora 15 on my asus eeepc 1015pw I have borrowed an external dvd driver and burned a x86-64 version Fedora 15 dvd but after I formatted the partitions, the installation program ask for network connection and it is failed to deploy the network card... so I been force to quit the installation.... I also try to config the grub by adding the "linux askmethod" but it is seems that external deriver is not in the options...
View 3 Replies
View Related
Jun 19, 2011
I am trying to install CentOS on my netbook and I am referring the following documentation: [URL]
However, after completing the steps mentioned in the documentation when I plug in the USB to boot in CentOS it says: Unable to find the kernel load image and then sits at the boot: prompt.
View 6 Replies
View Related
Apr 6, 2011
I've successfully downloaded openSUSE-11.4(64-bit) ISO image from the openSUSE site,and burned the ISO image successfully into 2 DVD's separately using Nero(ver.7) But I am unable to boot up from the DVD. When I pop in the DVD into my DVD-writer,a few seconds go by with the blinking cursor,and eventually boots off to Windows.The BIOS setting of my machine has been enabled to boot from CD/DVD first before HDD. No error messages are shown while I try to boot. The burned ISO image file is O.K. as it gets successfully verified after writing on the DVD. The image file {openSUSE-11.4 (64-bit)}being 4.29GB in size
View 1 Replies
View Related
Sep 30, 2009
I've lost my boot manager ,can't boot from harddisk ! I've installed F11 x86_64 kde livecd on a partition aside with FC10 and windows xp, created a /boot ext3 partition + a " / " ext4 root partition and a swap partition shared with F10.I've tried to restore booting windows xp with the windoze restore cd with the "fixmbr" tool, but it did'nt fix i
View 4 Replies
View Related
May 4, 2010
I installed a new graphic card from ATI 5770 (Club3D). After I did it I removed the propriatery ATI drivers I had installed thru the "Hardware Drivers" in Ubuntu and rebooted. Then I couldn't get into ubuntu again. When it starts booting the display just shuts down and says "Power Saving mode". The computer continues to load things etc. left it running and hoped it would show itself... nothing.
Anyway this happens everytime even with Live CD so I can't even get to a terminal... Started the boot without the splash and it went blank after it started some Speech thing. Just before that there were a few firmware files missing.
View 8 Replies
View Related
Dec 9, 2010
I just recently downloaded Ubuntu Netbook edition 10.10 to dual boot with my Windows 7. I successfully installed it and have both running, but it seems that the desktop version of Ubuntu is installed instead.
View 6 Replies
View Related
Apr 21, 2011
I'm trying desperatly to install Ubuntu Netbook Remix on my Asus Eee netbook. I've created an USB bootable stick. It boots. I get to the screen where I can choose the language and where I have the choice between "Try" or "Install". I choose Install. After that, I get to the screen about the preparation of the installation. It says I have enough disc space, that I'm successfly connected to the power and to the Internet. I click on next and... nothing happens! It stays for ever on that screen.
View 8 Replies
View Related
Nov 9, 2010
I am unable to boot the xen kernel but can boot the desktop kernel. The machine boots and the last message I see is:
(Xen) Created cpupool 0 with Scheduler SMP Credit Scheduler (Credit)
After this the screen just turns into a random mess. It looks like graphics memory is pointing at a area of memory filled with random data. The computer actually boots but the display is unusable and the keyboard fails (num lock doesn't work). I can cleanly halt by pressing the power button and waiting for disk activity to stop. After reading several other threads I've tried various combinations of vga=mode-0x0f00 and nomodeset but the result is always the same. I've set the vga mode to 0x0f00 as I actually get to see up to the "Created cpupool...." in this mode. The system boots without any issues with opensuse 11.2.
I'm using a gigabyte GA-Q35M motherboard and the output from lspci is:
00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)
00:03.0 Communication controller: Intel Corporation 82Q35 Express MEI Controller (rev 02)
00:03.2 IDE interface: Intel Corporation 82Q35 Express PT IDER Controller (rev 02) .....
View 7 Replies
View Related
Jan 5, 2010
when I booted Jaunty from the LiveCD, the desktop background to my Hardy install showed for a couple of seconds before the screen cleared and put the Jaunty desktop on there.This isn't really a problem, but I was curious as to why it happened (something like it has happened before with other versions, not always booting from CD IIRC) and just wondered if anyone could shed any light on it?
View 1 Replies
View Related
May 31, 2011
I seem to have a knack for having systems built that OpenSuse doesn't like. I remembered this afternoon why I gave up on 11.x - the 11.4 LiveCD doesn't like my setup, at least in terms of booting into a GUI. I have uploaded two photos I took of the bootup screen, in case the provide information that might be helpful. I am sorry about the shakiness, I have CP and the the 2nd one is harder to read because of that, but it says something about "amd radeon hd 6800 series (chip ID 0x6738) requires KMS" among other things.
Even though I'm really rusty in CLI, I'm happy to give it a go, to get this working, if possible. The two screenshots are [URL]
FWIW, the 11.4 LiveCD also really didn't like the NVIDIA GeForce 7000M / nForce 610M in my old Acer Aspire 5520 either.
View 9 Replies
View Related
Feb 15, 2011
I am trying to install ubuntu netbook remix on my asus netbook.I created a USB drive from windows.On Save and Exit from BIOS setup, system boots from hard drive with Windows 7 OS.
View 3 Replies
View Related
May 14, 2010
I can''t make the machine booth when a monitor is NOT attached to the machine. The PC seems to get past the P.O.S.T with minimal HDD activity, and then it simply hangs there, doing nothing. I know Linux is not booted because the HDD flashes briefly only 3-4 times and then absolutely nothing. When a monitor is attached, everything works perfectly.
I read somewhere that this happend when GRUB tries to display graphics, so I edited the menu.lst and removed the graphics line within it, which causes GRUB to display a B/W clear-text boot-menu (when a monitor is attached), but the machine still won't boot with no monitor. I also edited inittab to boot to level 3, same outcome.
More Info:
HW. FIC ION A603
~Welcome to First International Computer, Inc.~
OpenSuse 11.2 - Almost default install
Added SW: VNC and Squid (both active on Init 3 and 5
Boot Loader: GRUB
View 6 Replies
View Related
Jun 11, 2010
I have installed latest kubuntu (10.04) on sda7, ext4 , and i selected the advanced feature of the installer to install kubuntu bootloader on sda7. 11.1 is on sda5 .First , it destroyed my 11.1 grub bootloader on mbr . I managed to restore it with the 11.1 installation DVD. Now i try to boot kubuntu from the sda7 bootloader, without success . I searched the forums and tried some hints i found but found no similar problems. Here are the different entries i tried on grub (mbr) , content of the /boot/grub/menu.lst :
Code:
# Modified by YaST2. Last modification on ven. juin 11 15:41:32 CEST 2010
default 0
timeout 3
gfxmenu (hd0,4)/boot/message
##YaST - activate
[Code]...
View 9 Replies
View Related
