OpenSUSE Install :: ArtistX LIVECD Changed Boot Sequence?
Nov 22, 2010
I tried a LIVECD from Artistx: ArtistX - eXtra ordinary art tools Index of /mirrors/artistx And now my computer boots up into a kernel command line screen instead of the GUI type screen where I enter my name and password. Anyone know what this ##$%@ disk changed on my computer and how do I get it back to normal? Fail safe mode boots ok. On the LIVECD disk I selected boot from hard drive which worked but after I turn off my computer and restart, it goes back into that command line sign in screen and stays there.
View 9 Replies
ADVERTISEMENT
May 4, 2010
I formatted my old laptop's HDD completely to install openSUSE with a clean slate plus it couldn't handle XP anymore. I burnt a liveCD and NET CD but none of them boot (not at all) and since its my first experience with Linux I am puzzled. I get this message that operating system could not found (well there is none) and it suppose to boot from the CD I triple checked the boot priority I burnt extra CD's but nothing seem to work.
View 9 Replies
View Related
Sep 6, 2010
I'm having very strange issues with OpenSUSE 11.3 KDE LiveCD, mainly performance-wise. Most noticeably, it takes 10-30 minutes to actually boot the system, and it doesn't matter whether the LiveCD is booted from the USB or if it's install into the hard disk. There aren't any noticeable errors during boot, though, except a few "timeout" errors and not being able to lauch VirtualBox Guest Additions (which I don't need since it's not run from VirtualBox anyway).
It takes the most time during the "scanning USB devices" section if I boot from the USB, and during the state where it detects the network card/assigns an IP. In both cases, every dot that appears there takes around 2 minutes. During the boot, the PC seems to be mostly idle, and appears to do something only occasinally, when certain parts of the boot sequence are passed, so that makes boot up feel "jumpy" - nothing happens for 10 minutes, then the PC starts accessing the HDD, then nothing happens for 10 more minutes.
There are other performance problems, noticeably during installation to HDD (through the Install option from the CD startup menu - it's quite a bit faster when started from the running LiveCD). For instance, it takes around 5-10 minutes to make the screen where you need to choose the language and keyboard layout responsive. The performance, in both cases, seems to be inconsistent - sometimes it starts booting and responding quickly, the other times it's really slow, up to the point of outright hanging.
System specs:
CPU: AMD Phenom II X4 925
4GB RAM
HDD: WD Caviar Black 640 GB
GPU: ATI Radeon HD 4890
View 9 Replies
View Related
May 15, 2010
I have an Acer Aspire One Netbook. Everytime I try to "burn" the live 11.2 GNOME CD to an USB drive (1GB) it fails on boot. I've tried unetbootin, the application from pendrivelinux.com as well. When it boots, it usually can't find the image. So I have to type in the name of the image by hand then press enter. I actually type the below in:
boot: openSUSE_Linux_(GNOME)
So it starts loading the image in text mode. I don't mind this, except it stops when it tries probing for the CD/DVD ROM.
rebootException failed to detect CD/DVD or USB drive
It just stops pass there. I've tried to add in the options acpi=off, but do I add it in before or after I enter in the image name? BTW, it doesn't boot in my laptop either.
View 1 Replies
View Related
May 14, 2011
I can not porpperly boot into live CD. I get the option menu in beginning and when i select the liveCD option it starts loading the kernel and then screen gets garbled. full of very small dots. Its liek the graphics card is not recognised propperly. I've read about similar issue here: ATI Radeon HD 3650 AGP boot problem
but as i see the user's specific problem in taht thread was caused by having an AGP card and on an older version. however my card is PCI. it should boot normally. i haven't tried nomodeset parameter mentioned in that thread, but the card shouldn't need it anyway.
View 5 Replies
View Related
Nov 17, 2010
I have windows 7 and I'd like to install opensuse 11.3. I have tried with liveCD, live usb, live dvd, but when I click installation, it shows "kernel loading", and when it finishes the loading, all I get is a black screen. Sometimes, when I try with the live CD method it reboots and the same happens again.
In my other computer with XP installed inside, it works immediately. I have tried to change video mode to text and vesa mode, also I have typed "acpi=off noapic edd=off" in the boot options line, but it didn't worked.
The black screen appears not only for the installation option, but also when I choose boot live CD, and check installation media. By the way, I have checked the downloaded iso with md5 checker, and it's the right file.
View 9 Replies
View Related
Jul 5, 2010
I am certain that the problem is not with the CD. It can boot on my laptop. It's the RC2 of OpenSuse 11.3 Gnome. When I try to boot on my PC, I get the error "No devices matches MBR identifier: 0x502eadc3".I had some problems when installing Ubuntu, with HDD partitioning because it's SATA3. I tried several things, chandged from IDE to ACHI in Bios, then after it didn't work I simply plugged out all of the Sata cables but still the same. It should be because of Bios settings I guess.I have Gigabyte X58A-UD3R mainboard. Please help, I really love OpenSuse
View 5 Replies
View Related
Jul 29, 2010
I burned the live version of OpenSUSE 11.3 (Gnome, 32bit) to a CD to test the compatibility of an HP Pavilion p6510f. Although Xubuntu 10.4 booted up fine, OpenSUSE did not. A message about RAID would appear (too briefly to read) and then the computer would reboot.I checked in the BIOS and found that the SATA drive has 3 modes: IDE, RAID and AHCI. The hard drive was set to RAID.
When I changed the hard drive mode to IDE, I was able to run the OpenSUSE live CD; but the change ruined my Windows installation. Windows doesn't boot under IDE or RAID mode. (I have reset the mode to RAID and am restoring the Windows installation.) Is there an option/argument that I can pass to the kernel so that OpenSUSE will work under RAID mode? (Since Xubuntu 10.4 was able to do it, I'm assuming OpenSUSE should be able to.)
View 9 Replies
View Related
Jan 3, 2011
I have a box with Novell Suse linux installed. It asks for username and password I do not have and cannot figure out. I also have a SantaFe distro CD with which I would like to replace the Suse on the box. I cannot get the box to BIOS to change the boot order to boot from CD. I would like to break free of Windows, but can't seem to get there from here...
View 5 Replies
View Related
Jul 27, 2010
I wonder if this is the right sub-forum I quite often play around with beta releases. Sometime the Screen freezes. (so what) However is there a key-stroke ctrl-?-? to get to a login prompt ????(rather then press the reboot button) ???
View 3 Replies
View Related
Jan 31, 2011
I have Fedora 14 installed on my laptop (Installed with few issues) and I'm trying to install ubuntu on my desktop. I had ubuntu 10.04 installed before on a second (250gb) hard drive (Windows 7 on the other 1TB drive) with a few issues and kinda screwed a few things up trying to upgrade to 10.10. So, I said screw it, and downloaded the live .iso for 10.10 (x64) and burned it to disk. I boot from the live CD and choose the install option to use entire 250Gb disk. I choose my options, including to download updates and install 3rd party software and let the install run its course. Everything seems to be going fine and it asks me to restart. So I say yes, the disk pops out and the screen goes dark... and then nothing happens. The computer's still on but hasn't restarted yet. I hit the del key (Which I use to enter BIOS) and the computer finally restarts. I enter BIOS and tell it to boot from the 250Gb HDD, save and exit. However, it gets stuck at the point where it (It, I assume to be the motherboard) says "Loading Operations System ..." and with a blinking cursor on the line underneath. Nothing happeneds.
I tried again just this morning using the same procedure. I'm once again stuck at the "Loading Operating System .." screen.
EDIT: After poking around a bit more, I remembered I was confronted by a GRUB menu when I booted into Windows 7 HDD. So, I selected Linux from the menu and all seems good. Does anyone know why this is? It's very odd, well at least to me. Why would GRUB be on the windows hard drive? Is this something I should be concerned about?
View 2 Replies
View Related
Sep 30, 2009
I've lost my boot manager ,can't boot from harddisk ! I've installed F11 x86_64 kde livecd on a partition aside with FC10 and windows xp, created a /boot ext3 partition + a " / " ext4 root partition and a swap partition shared with F10.I've tried to restore booting windows xp with the windoze restore cd with the "fixmbr" tool, but it did'nt fix i
View 4 Replies
View Related
May 4, 2010
I installed a new graphic card from ATI 5770 (Club3D). After I did it I removed the propriatery ATI drivers I had installed thru the "Hardware Drivers" in Ubuntu and rebooted. Then I couldn't get into ubuntu again. When it starts booting the display just shuts down and says "Power Saving mode". The computer continues to load things etc. left it running and hoped it would show itself... nothing.
Anyway this happens everytime even with Live CD so I can't even get to a terminal... Started the boot without the splash and it went blank after it started some Speech thing. Just before that there were a few firmware files missing.
View 8 Replies
View Related
Feb 26, 2010
So I'm brand new to lunix os. I wanted to install xubuntu on a old sony viao laptop so I downloaded the live cd and tried to boot from it. I have changed the boot priority and I can here the cd drive spinning but nothing happens. Also I tried the second option on the installer (install it inside of windows) but I got an error saying I don't have permission.I've also gotten an error saying it cant find the disk but the disk shows up and I can open up/start installation. And I am the admin on the computer. Heres some computers specsWindows xp service pack 31gb of ramIntel Pentium processor 2.4ghz
View 8 Replies
View Related
Jan 5, 2010
when I booted Jaunty from the LiveCD, the desktop background to my Hardy install showed for a couple of seconds before the screen cleared and put the Jaunty desktop on there.This isn't really a problem, but I was curious as to why it happened (something like it has happened before with other versions, not always booting from CD IIRC) and just wondered if anyone could shed any light on it?
View 1 Replies
View Related
May 31, 2011
I seem to have a knack for having systems built that OpenSuse doesn't like. I remembered this afternoon why I gave up on 11.x - the 11.4 LiveCD doesn't like my setup, at least in terms of booting into a GUI. I have uploaded two photos I took of the bootup screen, in case the provide information that might be helpful. I am sorry about the shakiness, I have CP and the the 2nd one is harder to read because of that, but it says something about "amd radeon hd 6800 series (chip ID 0x6738) requires KMS" among other things.
Even though I'm really rusty in CLI, I'm happy to give it a go, to get this working, if possible. The two screenshots are [URL]
FWIW, the 11.4 LiveCD also really didn't like the NVIDIA GeForce 7000M / nForce 610M in my old Acer Aspire 5520 either.
View 9 Replies
View Related
Sep 15, 2009
I am trying to make a liveUSB(my DVD drive run out monthes ago), I use this iso image: openSUSE-11.1-KDE4-Reloaded-LiveCD.x86_64-4.3.1-Build4.1.iso I just cp the file in the iso into the usb, and cp the L : ootx86_64loader*.* into my usb, mv the isolinux.cfg into syslinux and run with syslinux command to install the bootloader. and boot with my usb drive,get Error: .. Loading device nodes with udev Boot logging started on.
... No devices matches MBR identifier: 0x5b265f15 reboot Exception: error console at Alt - F3/F4 ...
View 7 Replies
View Related
Jan 22, 2010
I recently downloaded the i686 11.2 and right before it seems as though the Live CD is going to load, with the cursor and the black screen present, it takes me straight to 'linux login'. It states that runlevel 5 has been reached, the failed services in runlevel 5 are postfix and the skipped services are nfs if that's of any significance. I have no idea where to start; looking around it looks as though this is a graphics card issue. My laptop has Intel X3100 integrated video. How can I manage to get the LiveCD working?
(Also, if let it sit at the login for a while, it says "usr/sbin/stop_preload: line 4: /usr/bin/killall: Input/Output error)
View 9 Replies
View Related
Jun 20, 2010
I've decided to try openSUSE again, but I'm having trouble with the LiveCD. I've tried both "linux" and "root" which has been mentioned in many places but neither works.
View 7 Replies
View Related
Aug 5, 2010
I've installed OpenSUSE with both DVD and liveCD. When I'm in Open SUSE booted from the CD/DVD, my wireless usb is recognized and I can connect to the network using the icon at the bottom right bar. When I install Open SUSE to my hard drive, my wireless usb seems not to be recognized and I'm not offered to connect to a wireless network.
View 3 Replies
View Related
Jan 26, 2011
-I could use a hand in installing opensuse on my 2009 Intel Macbook
-I need to use a USB stick for the install, my optical drive doesn't work.
-I am trying to reformat my macbook to run 64-bit opensuse 11.3 instead of Apple's proprietary operating system, OS X
-So I started here: Chapter1.Installation with YaST
-And in this article, under section 1.1. Choosing the Installation Media, i found this sub-section: Booting the LiveCD from an USB Stick.
-So i followed those steps to create a bootable USB stick in Terminal, and i got an error in Terminal and was unable to go any further;
-this was the error in Terminal: dd: bs: illegal numeric value
Would anyone know what the error means, and what i should have typed instead? Is it because my USB stick is generic instead of being a specific type like a U3 stick?
View 9 Replies
View Related
Aug 17, 2011
I have been trying to create a live CD or DVD with kiwi, and following the instructions from Portal:KIWI - openSUSE All went well with the building and creation of the ISO image, but when I try to boot it I get:
Failed to mount ext3 clic container Failed to mount root filesystem if I press Alt-F3 (suggested in the terminal)the top most error is tune2fs: Attempt to read block from filesystem resulted in short read while trying to open /read-only/fsdata.ext3 Couldn't find valid filesystem superblock. Something I did find was that it may not have permission to use tune2fs.I haven't done any fiddling with the template supplied with kiwi.
View 1 Replies
View Related
Dec 10, 2010
recently sent up another computer as follows:Two sata drives. Windows 7 was installed on the first drive(sda)and booted successfully. This drive was disconnected ( I have had some installs where Unbuntu wipes out the existing C drive eventhough I am installing to D) and Ubuntu was installed to the second drive (sdb). At one point I had to rebuild the grup on the Ubuntu drive and was careful to make it installed on the Ubuntu drive. To my surprise when the PC booted up I saw the Grub menu with a menu entry for Windows. The Windows drive was always the primary drive before the Ubuntu install. I was planning on the Windows drive being the boot drive and using a boot manager to determine where to go from there. If I utilize the BIOS boot option (F12) I can boot each drive individually. I cannot in BIOS set a particular drive to boot - just a hard drive. Everything is working I am just curious why the primary drive does not boot first. IN BIOS the Windows drive is a primary SATA with a lower number that the Ubuntu drive which is listed as a secondary drive.
View 4 Replies
View Related
Oct 5, 2010
I am facing a problem with my AT91SAM9260 customized board. Board is almost same as the evaluation kit.
I could download the binaries ( Bootstrap-v1.16, u-boot-1.3.4, linux kernel 2.6.20) successfully to the DATAFLASH/NANDFlash in my board by using atmel SAM-BA tool with usb/serialport/jlink.
Here I describe the problem.
When I power up the board, boot strap is not jumping to U-boot location, in the normal boot sequence and board stuck with bootstrap.
But when I disconnect/connect the JTAG USB cable ( provided with SAM-BA ICE) , it's jumping to u-boot location and booting the board properly. I'm getting the same error in NAND FLASH also.
I have tried one more test case.I copied bootstrap binary at the flash location, [location which is specified for u-boot binary] instead of U-boot.bin (location: 0x8400 in dataflash), I got continous bootstrap debug messages in my console. [ So can I conclude SDRAM doesn't have any problem? ]
Bootstrap code or U-boot code ?
View 4 Replies
View Related
Feb 7, 2010
I am getting a "No devices matches MBR identifier 0x8c71ad6e!" message along with a reboot in 120 seconds message. This occurs after kernel load and at the start of openSUSE boot.
I have tried both the 64bit and 32bit downloads
openSUSE-11.2-KDE4-LiveCD-i686.iso
openSUSE-11.2-KDE4-LiveCD-x86_64.iso
I have checksum checked both images after download. I have attempted the install on CD and USB stick with both images and the result is always the same.
I've included a screen image on my site: No Devices Matches MBR Identifier | Badzilla
View 5 Replies
View Related
Oct 16, 2010
openSUSE-11.3-Addon-Lang-i586.iso and openSUSE-11.3-GNOME-LiveCD-i686.iso
Index of /distribution/11.3/iso
And what is openSUSE-11.3-Addon-NonOss-BiArch-i586-x86_64.iso ?
View 1 Replies
View Related
May 15, 2011
When I first installed openSUSE 11.4 the /boot directory looked like this:
I had installed VirtualBox through Yast and decoded to delete. After deleting the /boot directory looked like this, pointing now to the desktop kernel.
I went into YAST and deleted all kernel entries that contained desktop, trying to get back to the original configuration.
After doing this, the /boot directory now looks like this.
Is there any way to get back to the original kernel configuration without having to do a complete installation?
View 6 Replies
View Related
Mar 30, 2009
I finished downloading of "openSUSE-11.1-KDE4-LiveCD-i686.iso" file. I downloaded it by Opera WB. Then using Nero I burned this file to CD. But there is a problem with boot. Please, make a support to this problem. Maybe file, which is in a site opensuse.org is damaged?
After the reboot of computer this text appears:
ISOLINUX 3.63 0x49364136 Copyright (c) 1994-2008 H. Peter Anvin
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Loading
Invalid or corrupt kernel image.
boot:
View 7 Replies
View Related
Nov 15, 2010
I am super new to linux. I have tried a lot of distros but went with OpenSUSE11.3. I have both gnome and kde live cd. Now to the problem, When I put in the live cd and boot - the computer finds the wireless card and lets me connect to the internet. This works on both versions. But after clicking on the install icon the wireless no longer starts and then I cant get it to work. Maybe its something I should be doing. After all I am new to this.
View 4 Replies
View Related
Feb 2, 2010
I recently changed my username but now the Home button (under Computer Tag) on Kirchoff men is linking old user, how can I change it?
View 1 Replies
View Related
