OpenSUSE Network :: Knetwork Manager Fails After Virtual Box Install
Aug 15, 2010
I have installed Vbox on 2 systems running Opensuse 11.3 and both have experienced knetworkmanager failure. Knetworkmanager failed after a failed wake up from sleep mod, which also had been working perfectly until this failure. I am wondering if the vbox kernel modules could be causing this isssue. To temporarily fix the problem I am running my network connections through yast networks setting . (which uses the traditional ifup method and everything is working)
View 3 Replies
ADVERTISEMENT
Apr 29, 2010
I having problem after doing update today using zypper up.I get this error when I try start knetwork "knetwork manager cannot start due to misconfigured. system dbus policy does not allow it to provide user settings".
View 9 Replies
View Related
Jan 28, 2010
I have a minor problem with Knetwork-manager. When I boot up, it won't connect to my wireless router automatically. I have to right-click the taskbar icon, disable wireless, then enable wireless, then it connects fine.It remembers the password fine and once it's connected, it's flawless. It's just the minor issue of having to effectively 'switch the internet on' rather than it just being connected when I turn on my laptop.
I'm using Opensuse 11.2, KDE 4.3.1 (didn't have this issue with 11.1). I've tried the latest Kubuntu (9.10) and knetwork-manager worked flawlessly but I didn't like the rest of the OS so I came back to Opensuse If I restart, suspend or hibernate it usually connects okay, it just seems to be when I boot from 'cold'.
I've tried nm-applet but same problem. I also tried wicd but it didn't really like my system. I've changed my wireless router recently as well with no change, so I don't think it's that. As I say it's a minor problem, it's not really an issue for me to turn it on each time but it would be nice to clear it up. I've googled and searched since 11.2 was released but haven't found any answers and my linux skills are still a bit lacking.
View 2 Replies
View Related
Mar 29, 2010
I have searched around a bit for a knetwork manager issue I am having on my opensuse 11.2 32 bit install. My wireless card is an 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) I am currently using the Broadcom wl driver
I am on the Internet with this machine as I am typing using the older "ifup" method. I am having great difficulty connecting to the Internet when I use knetwork manger though. The strange part is when I am connected to my router with knetwork manager, I can log into my Router, but I can not get to any web-page/ping any outside address.
so far the best (I was able to locate) advice I was able to get is located in this post. < Broadcom wireless, partchy internet - openSUSE Forums > following a posted how to to disable IPV6 (I suspect this may be the issue??), I was unable to locate modprobe.conf, or modprobe.conf.local, even after I updated via updatdb. I gave a shot at entering in "disable_ipv6=1" into "menu.lst". However, this did not solve my issue with knetwork manager. If my network information is needed when I am "connected" utilizing knetwork manager
View 9 Replies
View Related
Oct 28, 2010
I did a fresh install of OpenSuSE 11.3 KDE 64-bit on my new laptop. Worked like a charm. But I brought it with me to work without connecting it to a wi-fi and now the network manager doesn't want to start when I'm back in range of my home connection. Also, whenever I try to launch KNetworkManager, it won't load up a window and I still can't connect. This is even disabling the Ethernet port also.
View 3 Replies
View Related
Feb 4, 2010
After I install 11.2 clean from the ISO, I would like to update ONLY knetworkmanager, and not all of KDE. I would like to use zypper commands similar to the one below, which work for KDE. However, I would like the syntax for only knetwork manager and not all of KDE sample for KDE:
# please let me have the correct commands for
# ONLY updating Knetworkmanager
# These work fine, but I don't want to update all
# of KDE. I only want to update knetworkmanager
[Code]...
View 4 Replies
View Related
Jul 5, 2011
OpenSuse 11.4 Asus Netbook 1000H Following other members in the forums I have installed Opensuse 11.4 on the Netbook. In the early days Ubuntu Netbook Remix worked well for me. But this has been discarded, and the "one size fits all" Ubuntu had become slow and cumbersome. So..... onto my post. Opensuse is working well. The install went beautifully.
It detected the Wireless Internet and I am able to get on line. I also need to share the Internet connection to a desktop. This is done via a small network switch. Thus far I cannot do this. I tried to use ifup to configure a static ip but this busted my Wireless configuration. I went back to knetwork manager. Then I tried to set up the wired network using knetwork manager and under IPV4 "share" the connection. But this blanks out any possiblity of a static address and substitutes dhcp. My desktop cannot ping the this dhcp address. Ubuntu had this thing called Firestarter? - from memory. This configured the system to sharing the network.
View 7 Replies
View Related
Dec 9, 2009
I have upgraded to KDE 4.3.4. Network manager now works but whenever I reboot or tun the computer on I have to start it manually. I have added it in "system settings > autostart", but it has made no difference.
View 9 Replies
View Related
Nov 10, 2010
I've just setup my mother's desktop PC (HP P6510F) which has a wired connection to the internet, with 64-bit openSUSE-11.3 KDE-4.4.4 desktop. Her PC also has a wireless device, so I decided to set that up. I have it working with the internet (using knetworkmanager), but I have to launch knetworkmanager from a terminal each boot, as it is not launched every boot by default.
What is the 'proper' way to have knetworkmanager launched every boot in KDE4 ? (I can hack at this, but if there is a preferred/recommended method, I would rather use that). I suspect no more detail is needed, but in case one is curious: Her wireless is:
[Code].....
View 9 Replies
View Related
Jun 20, 2011
I understand that the K (KDE) network manager is a KDE app but does it actually function in runlevel 3? By that I mean does it allow wireless connections to work? I've been trying to do this but can't. I have a need to while in KDE to sometime init 3 and while in runlevel 3 I need my wireless to work. I havent figured out if Knetwork manager still functions outside of KDE or if I need to just use ifup traditional.
I did search the forum for threads related to knetwork manager and did not see anything related to this so I hope someone can assist me. Also if I do need to use ifup traditional method, is there anything specail I need to do so that it works without issues such as, uninstall knetwork manager or something else? I ask this because my previous attempts at using ifup (by switching to it from YAST) end up making my wireless not work. I can scan and find my network but after entering my creds it doesnt do anything. I managed to get it to work once somehow but after a shutdown and reboot it no longer worked. Just incase you need to know, I'm running Suse11.4 KDE 4.6, my wireless module I believe is a iwlagn or something like that. My laptop which Suse is running on is a Toshiba A665-S6086 core i3, 4GB RAM, 500GB HDD.
View 4 Replies
View Related
Jun 7, 2011
I've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
View 4 Replies
View Related
Aug 5, 2010
I am getting trouble with knetwork manager. I created a new connection by scanning and connecting using knetwork manager. But every time connection gets disconnected and ask for password and again it connects.
View 8 Replies
View Related
May 6, 2010
After I upgraded to ubuntu 10.04 my internet connection was working fine( both wired and wireless) and now all of a sudden knetworkmanager has disabled itself so I cannot get online at all. When I leave the mouse to hover over the icon it says unmanaged. Does anyone know what could have caused this and if theres a fix?
View 9 Replies
View Related
Nov 28, 2010
Because of some glitches I've experienced with Knetwork Manager as of recent versions of Kubuntu I want to use WICD but I know they can get a bit botched juggling them around. I remember getting it right once using a wired connection ot install but would like ot be clear in advance of doing this tomorrow.
View 1 Replies
View Related
Nov 18, 2009
I'm running Fedora 11, and just did an update of the system. It looks like there was an update to the package that takes care of knetwork manager. In the past, I have played around with it, but it hasn't met my needs, so I went back to nm-applet, which works fine.
I'm curious about the update, and would like to see if it works. However, knetwork manager won't start as there is another network manager already running (there is a message about this everytime I log in). I can easily kill nm-applet, but logging out and back in causes it to reload, and I still get the message from knetwork manager. So here are my questions:
1) With the update, is knetwork manager stable and robust enough for regular use (the docs for F11 said it wasn't upon F11 release, so included gnome's network manager as the default network manager)?
2) How do I get knetwork manager to work (I presume this means I turn off Gnome's network management and switch to knetwork management)?
View 2 Replies
View Related
Aug 11, 2010
I am attempting a Network installation of openSuse 11.3 on an old desktop which has IBM Boot Manager so that I can boot to one of three OSs, openSuse being the third. Sadly the installation of openSuse fails before the CD initial boot has finished. Looking at the text log of the starting process the problem appears to be a driver and the last line of text where it stalls refers to eata driver.
There are 4 hard drives in the machine, configured as two RAID 1 arrays driven by a DPT 2144W hardware raid card. (Very old but very good). If I Google eata I get a good deal on SCSI raid and DPT cards but I am out of my depth when they say a kernel module is needed.
Another concern is that the RAID arrays are configured using a bootable DOS configuration disk and once this is done they are recognized by other OSs such as eCS and OS/2. The arrays are just treated as single drives so these OS installations do not interfere with the card configuration. I am concerned because I cannot afford to lose the data on the drives but it appears the linux driver might want to rebuild the arrays.
View 3 Replies
View Related
Mar 14, 2011
I have a D-Link DNS-323 network drive which mounts at multiple points to my filesystem when booting. I had to make some fstab changes when I upgraded from 11.2->11.3 last year, and now the same thing seems to be happening since I've upgraded to 11.4. When I login to my profile the desktop hangs and no icons appear. I cannot open a Nautilus window, or access ALT-F2, however just about every other program works fine. Since I disabled the fstab lines (slightly modified when copied here to generalize):
Code:
#//192.168.123.xxx/SHARED-FOLDER1/User-folder /home/user/Documents cifs guest,_netdev,uid=user,gid=users
#//192.168.123.xxx/SHARED-FOLDER2 /home/user/SHARED-FOLDER2 cifs credentials=/home/user/.scripts/.creds,_netdev,uid=user,gid=users 0 0
the desktop icons load and Nautilus works. Can I adjust my fstab syntax to correct this and get my network drives back? I think last year the issue was in referencing the ".creds" file...
View 4 Replies
View Related
Aug 3, 2010
How do you install network manager in LXDE. I need to choose from a list of available wireless networks.
View 2 Replies
View Related
Feb 4, 2010
I just installed virtualbox 3.1 via synaptic. Installation went fine, but no icon in any of the usual places where the blighter might be hiding or how I might get it back?
View 4 Replies
View Related
Nov 10, 2010
Right after selecting [Install Ububtu] / [Try live CD], I get this message and the system freezes. The same message appears when trying to install Ubuntu from VMWare Player or booting from a CD instead of a USB stick. Has anyone else experienced the same?Processor Intel Celeron 900 Mainboard:Acer BA50-MVBios:Phoenix V1.3311Chipset:Intel GL40Video Card :Mobile Intel(R) 4 Series Express Chipset FamilyHard Disk :Western Digital WD1600BEVT-22ZCT0 ATA Device (160GB)My old HP Pavilion boots and installs Ubuntu 10.10 just fine from the same USB stick. I have tried both 32bit and 64bit editions with same results.
View 1 Replies
View Related
Jun 18, 2011
My first post on openSUSE, since migrating from Ubuntu (didn't like Unity!). I've installed the virtualization packages from YAST2 and when I attempt to run virt-manager, it crashes. The error is
Code: could not import gobject (could not find _PyGObject_API object) I've searched both these forums and via a general Google and although I've found posts, all of them are apparently resolved - but not mine.
My laptop is fully up to date and running Gnome 3 on openSUSE 11.4.Has anyone else come across this lately?
View 1 Replies
View Related
Feb 26, 2010
I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies
View Related
Mar 28, 2011
I want to experiment with pacemaker, and for that I'd like to start kvm virtual machines with the snapshot option, so that as soon as I stop the vm, all changes are gone and I can start over. Since I couldn't figure out how to setup networking (vm - vm and vm - public) with a kvm commandline without disturbing the Network Manager, I used the Virtual Machine Manager (VMM) for this.
It works now, but I cant see how to use the snapshot option with the VMM. On the other hand, I cant see how I start the resulting vm from the commandline. When I look at the process list, I see the command with these network options:
Code:
-netdev tap,fd=21,id=hostnet0
-device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:45:30:b0,bus=pci.0,addr=0x3
-netdev tap,fd=22,id=hostnet1
-device virtio-net-pci,netdev=hostnet1,id=net1,mac=52:54:00:84:5b:bc,bus=pci.0,addr=0x6
How would I go about these fd=nn things on the commandline? I guess I somehow have to start the tap devices before, but how?
View 1 Replies
View Related
Jan 26, 2010
while trying to set up Xen Virtual Nodes we encountered one issue with the network (which is why it is posted here On the DomU the interface is provided by a bonding -bond0- of three NICS. Now the Xen network script a) does not take this bonding b) destroyes even this bonding From a number of posts I assume I have to configure this by hand, correct? Is there an instruction how to do this? Simply create a bridge on top of bond0??
View 1 Replies
View Related
Mar 1, 2010
I would like to use zypper to update openSUSE 11.2 through the Virtual Terminals (tty1 thro' tty6).
Network Interface is wlan0 (Wireless LAN, home network through a Router) that requires a password using WPA2.
My question is how to start wlan0 through the command-line ?
View 9 Replies
View Related
Sep 16, 2010
It complains that it can't connect to localhost because probably libvirtd is not running. Well it is running, so please share your wisdom with me. Here is error message:
[Code]....
View 5 Replies
View Related
Jun 7, 2011
I am running Windows 7 inside Virtual Machine Manager - running on Cent OS 5.6. My problem is that the Windows 7 'Window', is only about half the size of the screen. Is there any to change the resolution of the OS running inside Virtual Machine Manager?
View 6 Replies
View Related
Mar 9, 2010
I just intalled OpenSuse 11.2 on VmWare Server 2.0.2, the network is configured as Bridged and is sucefully configured a fixed IP in my network. Ok... The problem is... I can ping / trace all addresses from OpenSuse console. But I Can't wget all of them... It's a random thing. the same address that trace's ok, don't work for HTTP.
View 2 Replies
View Related
Sep 28, 2010
Recently loaded 11.3 onto a virtual machine, however none of the network settings will allow me to connect to the internet. First time Ive had this happen, other distro's Ive experimented with connected with no problems. I recall seeing a similar topic some time ago (dont remember if it was here or another forum), but at the time, there had been no fix. Anyone know if this has been fixed?
View 5 Replies
View Related
May 16, 2011
So up until I updated from Opensuse 11.3 to 11.4, I hadn't any issues with my network connection. At least none worth mentioning. Once I installed 11.4, I've had weird issues with varying lengths of connection. Sometimes I can't connect anywhere, sometimes I can only get to the router, sometimes I'm 100%. I'd fiddle with YAST until everything worked. I honestly have no clue whether or not anything I did had any effect.
Enough of the iffy history, here's what's happening now. For the past few weeks up until last night, I have been at 100% connectivity. I never turned off my computer until last night (it just shut itself off, like the cord was unplugged. I dunno what happened, maybe it was my foot, maybe the PSU. I think it has happened before.). When I turned it back on, I was only able to connect as far as my router (192.168.1.1, a D-Link Gaming router that has always been very good to me). I could not make it to my modem (192.168.0.1, a Quest DSL modem. Once I can get here, then usually I'm good to go 100%).
I tried again this afternoon, and no change. I then get the crazy idea to unplug the ethernet cable from it's PCI-card home and return it to the onboard port (which I long ago declared defunct). Immediately after plugging it into that port, I ran "ping 192.168.0.1" and I started getting returns. I open up Firefox and try to load an external page, and nothing happens. I go back to the console that I was pinging from, and it had stopped. I start pinging my router, and no luck. What I conclude from my little experiment is that the router is not at fault.
1. It did not change at all between being at 100% and being at 0% after reboot.
2. I was able to get returns from the modem, past the router, for a brief period of time while using the defunct ethernet port.
Since I never had these problems before updating to 11.4, I'm inclined to believe that it was the update that started these problems.
View 9 Replies
View Related
