OpenSUSE Network :: Boot-up Without The Network Being Initialized?
May 13, 2011I have to keep doing "dhclient eth0" every time I boot up. What should be in charge of doing this automatically at boot, and how do i fix it?
View 3 Replies
ADVERTISEMENT
OpenSUSE Network :: New Dual-boot Machine Has Poor Network Performance
Jul 27, 2011This is a thread I've moved over from the install forum and is hopefully more focused. Sorry if I have violated some protocol. Problem I have a new machine build configured to dual-boot Windows 7 and OPENSUSE 11.4. Network performance in Windows is very good but network performance in OPENSUSE is very poor.
[Code]...
OpenSUSE Network :: Setup As A Network Boot Server To Install Solaris 10 On A Sun Ultra 10 Client?
May 12, 2011I have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies View RelatedOpenSUSE Network :: Literally ODD - Network Services Don't Work Every Second Boot?
Sep 14, 2010I have an OpenSuSE 11.1 in vmWare ESX and every other boot I can't access any running network services (ssh, webmin, qmail, mysql, ...) from outside. I just need to login, reboot and voila - network services are working.I gradually updated to 11.2 and 11.3 by following the wiki with success but this problem remained. So I reverted to snapshot of 11.1 and now I would like to identify and solve the problem here first.I also looked at /var/log/messages /var/log/boot.msg /var/log/lastlog but can't find anything usefull. I will now compare those files from the working and non-working boot but meanwhile someone already has an idea or experience what could be wrong?
View 3 Replies View RelatedOpenSUSE Network :: Can't Find Network Hard Driver On Network?
Oct 31, 2010On Linux Mint (Gnome) i used to go to Network drive. that is on the right hand side of Nautilus there is a short cut for Network. in there i could see my network hard drive and other laptops connected to the network, and i could access my files. but on OpenSuse, when i open the network folder, nothing comes up. may be it needs some sort of configuration.
View 2 Replies View RelatedUbuntu Networking :: If Plug Into An Ethernet Network After Boot The Network Never Connects
Oct 5, 2010I have a system running a very basic LTS install (10.04). Ubuntu has been setup with very little additional packages. No GUI. Once it's booted to a prompt for the first time I add the following packages,
cups cupsys ssh pi memtester nfs-common
aptitude safe-upgrade
At this time I don't have additional information on exactly what packages are installed. I did not perform the installs myself. I will update this thread when I get more details from my IT counterpart on how the system was setup.
This is used for a headless(no monitor, no keyboard) system running some custom applications.
Here are two problems.
1. If I plug into an ethernet network after I boot, the network never connects. I need to reboot with the network connected in order to get an IP. What is the service to "auto connect" to a network?
2. I have a network printer configured on lpd called myprinter. If I am connected to the network when I boot, I can print to this printer just fine using:
Code:
However, If I boot disconnected from the network and print to myprinter, the jobs obviously cannot print. They get spooled. Using 'lpstat -t' I can see that the spooled print jobs are assigned a job number and that myprinter is trying to connect. I shutdown, reconnect my ethernet network and boot up. All my printer configuration is blown away.
/etc/cups/printers.conf has been wiped out to look like this:
Code:
My 'good' printer configuration is copied to printers.conf.O
To recover from this, I need to stop cups, copy printers.conf.O to printers.conf, restart cups, and re-setup my network printer.
So, What causes my printers to get wiped out? I've repeated this on 4 systems with the same setup.
OpenSUSE Network :: Find Out Network Usage / Keep Track Of Total Network Usage?
May 24, 2010How do I find out the network usage ie the total amount of data is transferred in or out of my computer (openSUSE 11.2 and gnome) and keep a track of the total network usage?
View 1 Replies View RelatedOpenSUSE Network :: Connect To A New Network It Use The Name Of The Last Network
Jan 3, 2011When I try to connect to a new network it keeps trying to use the name of the last network I connected to. This has just started happening in the last two months.
View 9 Replies View RelatedOpenSUSE Network :: Create A Home Network To Share Files - Scanner And Printer
Dec 31, 2009I have four PCs in my house that are running opensuse 11.2 and I want to create a home network to share files, scanner and printer.
View 4 Replies View RelatedOpenSUSE Network :: Network Login Starter - Set Up A Server - Centralized Username And Password
Jan 21, 2010I'm new to networks and servers, been using Linux on the desktop for a while now but always relied on the company's IT guy for setting up everyting LAN-based.
Now I want to build up my home LAN, and want to do it with Linux. I've managed to set up LAMP and file share servers.
What I am looking for is information on what I need, and how to set up a server for the following tasks:Centralized Username and Password, that when the user logs into any one of the desktops in the LAN, it uses this for authentication
Something that allows this authentication to be utilized in other servers (file access, web access, router logging, etc.). Something to make it easier for continuing permissions from one service to another. e.g. I have IPCop filtering content, and it has provisions for tracking who is making which request if there is authentication going on. (optionally) to run a script for mounting Samba shares or mapped network drives so from one system to the next. For example, in whatever box somebody logs in, it mounts a server share ("smb://Myserver/users/<username>") to a local folder ("my_user_share").
So;user "fred" ="smb://Myserver/users/fred" and user "wilma" = "smb://Myserver/users/wilma" but both would find their respective one mounted under "~/my_user_share". This would be irrespective of which box they are loggin in with. If the server share location changes (new server/servername), I change it on the server so the next time they log in it points to the right place.
I guess it is similar to Window's Active Directory, though I'm not sure what it's called, how to configure it and what it is and is not capable of doing.
OpenSUSE Network :: Create A Gateway Server That Allows Virtual Private Network Connections?
Feb 26, 2010I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies View RelatedOpenSUSE Network :: Enable Static DNS Address For Mobile Broadband In KDE Network Manager?
Mar 5, 2010How do I activate static DNS for mobile broadband. I can't find any place to write down this information. Settings are made in Network Manager - not Yast.
View 3 Replies View RelatedOpenSUSE Network :: Hostname Not Saved In Router Table / Broadcast It To Entire Network?
Jun 13, 2010I setup the hostname for my linux machine to Linux. If I try ping Linux from the same computer it works. If I try from another computer inside my network the host can not be resolved. If I ping the IP from another computer it works.
I take a look in my router at DHCP client list and my linux machine doesn't have the Hostname set up.
How to broadcast the hostname to the entire network?
OpenSUSE Network :: Can't Ssh Remote Hosts / Can't Ping Any Machines Outside Local Area Network?
Aug 29, 2010I just installed open Suse 11.3, and I cannot SSH my school. Upon further investigation I could not even ping any machines outside my local area network. Ironically I could nmap machines outside my local area network.
View 4 Replies View RelatedOpenSUSE Network :: Network Manager Default Connection Can Handle Virtual Interfaces?
Jun 7, 2011I've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
View 4 Replies View RelatedOpenSUSE Network :: Error As "This Address Uses A Network Port Which Is Normally Used For Purposes Other Than Web Browsing
Jul 27, 2011I am facing two issues with CUPS - 1. I have installed cups 1.3.9 over OpenSuse11 x86. Please check below -
cups:/usr/share/cups/banners # cups-config --version
1.3.9
cups:/usr/share/cups/banners # cat /proc/version
Linux version 2.6.27.7-9-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
I have added few printers over there and everything is working fine. I can also able to add - delete - modify any printers from "yast2 printer" command. I can also able to browse cups web interface via http://cups:631, but when I am going to manage the printers (start - stop - delete etc), none of the buttons are working in firefox5 not even in IE also. Older version of firefox is giving error as "This address uses a network port which is normally used for purposes other than Web browsing. Firefox has canceled the request for your protection." All other buttons are working properly.
2. LINUX - LINUX Printing - OK
LINUX - WINDOWS Printing - OK
WINDOWS - LINUX Printing - NOT OK
While giving printing from Windows machine (Printer attached on Linux), there is no problem to coonect the printers, but unable to print.
OpenSUSE :: The KDE Network Monitor Requires 3 Reboots Before Being Able To Connect To Wireless Network
Mar 10, 2011After installing 11.4, I need to type in the command to update the firmware for a broadcom wifi adapter. Then I needed to reboot, twice, before the system knew to use the adapter (where the adapter wifi light goes from orange to blue).
Then I needed to add my wireless network and type in my key. But the key does not take. If I click on my wireless network icon, it just re-asks for the key and does not connect nor give any other message. Network icon continues to display no connection.
So I need to reboot again.
When the system starts again, the adapter is blue, I click on the icon for my wifi network and it connects without asking for my key and I can then set to start my wifi by default.
Now my wifi works fine.
OpenSUSE Network :: Unable To Setup 10.3 As Samba PDC - The Network Path Was Not Found
Jun 1, 2009I am trying for the last many days to setup my opensuse 10.3 as Samba PDC Server according to the URL mentioned below, but in vain:How to setup SUSE 10.3 as Samba PDC - openSUSE When ever I try to join a Windows XP machine to the domain setup on Opensuse, I get the error:'The following error occured while attempting to join the domain. The network path was not found'. What could be the reason for this error despite of the fact the I am able to ping the FQDN of the PDC from the XP machine, but the XP machine simply denies to join the domain because of the above mentioned error.
View 7 Replies View RelatedOpenSUSE Network :: Permanently Enable X Connections From All Machines On Local Network?
Jan 13, 2010Does anyone know how to permanently enable X connections from all machines on my local network. I keep having to enter 'xhost +' to allow X connections.
View 2 Replies View RelatedOpenSUSE Network :: Samba Security Update / Lost Access To Network
Mar 25, 2010Installed a security update for samba tonight via Opensuse updater.Now, when trying to access my home network an authentication box pops up (never used to)Asks me to enter authentication for my home network.I enter my username and password and hit enter. After a few seconds the authentication box pops up again askingfor the same indicating I have entered the wrong username / password combination (which I know I have not).
View 9 Replies View RelatedOpenSUSE Network :: Network - Browsing The Internet With Domain Names Does Not Work
Jun 25, 2010In short: browsing the internet with domain names does not work. The long version: I've configured my network with DHCP and ifup. Ping works on my internal net and with servers in the internet. Dig work's too! I get the right IP to the requested domain. When i try to access the internet using firefox or even wget i get an DNS error. For example wget is showing the following error: Resolving heise.de... failed: Name or service not known. wget: unable to resolve host address 'heise.de'
Again dig show me the right IP and if i add the entry to /etc/hosts it work's too! I've even tried it with manually setup of ip address, nameserver and default gateway but with the same result. Switching off the firewall has no effect on this problem, too.
OpenSUSE Network :: No Network Connection After Firwall Settings Changed / Get It To Work?
Nov 17, 2010I deleted the firewall files "K09SuSEfirewall2_init", "K01SuSEfirewall2_setup", "S11SuSEfirewall2_setup" and "S01SuSEfirewall2_init" from "/etc/rc.d/rc5.d" in order to disable the firewall when rebooting.
As a consequence all network services are not working. I can't connect to any other machine nor to the internet.
I rebuilt the symbolic files based on the ones for runlevel 3, but still no network services are available.
Any suggestions how to make it work again? I'm using Suse 11.3.
OpenSUSE Network :: Susie 11.4 Network Manager Doesnt Start At Bootup
May 22, 2011I am using an Acer Aspire 5536 AMD dual core laptop with a 64bit installation of Susie 11.4. Using 11.2 I had no problems connecting to the wireless router. As soon as 11.4 was installed, clean install, and the laptop rebooted, network manager failed to start, until manually invoked and then enabling networking through the system tray. Even after this it will not connect to a wired or wireless network sometimes for more than 30 minutes.
View 9 Replies View RelatedOpenSUSE Network :: Network Manager Is Not Present In Tray Bar After Upgrading Gnome 3?
Jul 23, 2011I tried to install suse 11.4 on the new gnome desktop 3. everything seems to work except the network manager. Is not present in the bar and I can not restore it. tried to reinstall network manager but to no avail.Does anyone know how I could solve this problem
View 1 Replies View RelatedOpenSUSE Network :: Wireless Not Responding, Hardware / Unable To Enable It Through Network-manager Applet?
Apr 4, 2010I recently installed OpenSUSE 11.2 and everything works fine except wi-fi card, of course. The problem is that after installation the system recognized the card (is was listed in network devices in Yast) but I was unable to enable it through network-manager applet. Though the device could make scanning through terminal (found article in docs but didn't fully understand wpa_gui). Then i was stupid enough to delete the device from Yast list to try to reinstall it. So the problem is that i simply can't do this cause i see no way to re-detect. That is the goal is to at least turn back to post-install system state and try to enable wifi card again.
View 9 Replies View RelatedOpenSUSE Network :: Network Not Work \ After Install All Packet On Test Internet / Update Was Error?
Jan 5, 2011I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP
View 8 Replies View RelatedOpenSUSE Network :: Create Network Bridge / Device Hooked Up Via Ethernet Had No Internet Connectivity?
Feb 25, 2011I'm on opensuse 11.4 (11.3 won't work with my monitor).
My computer gets internet through wireless and I want to share that internet through its ethernet port. So far I've tried using Knetworkmanager to create a network bridge between my wireless and wired connections. I created a new wired connection and shared it using the ip address settings. I was able to get both connections active, but the device hooked up via ethernet had no internet connectivity.
I also tried this command:
echo 1 > /proc/sys/net/ipv4/ip_forward
but another test resulted in the same fashion (no internet on wired). I believe anything I add to /proc should have an immediate effect, correct?
OpenSUSE Network :: Network Manager & Bluetooth Systray Applet Takes Time To Load
Mar 5, 2011I am using opensuse 11.3 64 Bit Gnome. The problem is the network manager & the bluetooth icon takes unnecessarily long time to load (2-3mins) & until it loads I cannot connect to the internet.
View 1 Replies View RelatedOpenSUSE Network :: Unable To Ping The Default Gateway When Using Custom Settings - Unreachable Network
Jul 17, 2011I installed openSUSE on one of my work system. The network port wasn't working when I was installing, but works fine now (checked in Windows). But for some reason, I am not able to configure the network. I used both Dynamic and Static IPs (both work fine in Windows) but still no go. I am using Yast Control Center for this purpose. I can't even ping the default gateway when I am using custom settings. When I use dynamic settings, it says Unreachable Network.
View 7 Replies View RelatedOpenSUSE Network :: Unable To Boot From Lan
Jan 27, 2010I was trying to create boot image on my pc with opensuse to boot into it from my laptop.
I downloaded 1-click packages of kiwi, ltsp etc. First, I checked if I had all needed packages - kiwi-ltsp-setup -p. I installed everything manually, after that this check gives me no errors. Then I ran kiwi-ltsp-setup -c. Everything seems to be OK, but when I try to boot from laptop - I see boot menu, select to boot kiwi-ltsp and then get message "failed to load network module!".
I gave up and tried to make fat client-my laptop has better proccssor than server anyway.I downloaded opensuse 11.1 i586 dvd, mounted into /mnt/11.1 typed in console kiwi-ltsp-setup -fat. It completes without any errors and I get file example.img ~185mb en /srv/kla. After that I try kiwi-ltsp-setup -c and I get foolowing error - Starting kiwi-ltsp with AoE (kla) failed.I have changed kiwi-ltsp config file, but still no success.