OpenSUSE Network :: NFS - Mounting During Boot Process On 11.4?
May 11, 2011
Using OpenSUSE 11.4 on a backup server. At boot, it needs to connect to the main server's NFS share. Watching the text scroll up the screen, it's obvious that the system waits for anything up to several minutes showing 'mounting NFS...'. Once it (eventually) passes that point, the rest of the boot procedure is as fast as expected.
If NFS is disabled at boot, normal boot times are restored. If the NFS client is restarted via 'rcnfs restart' once the system is up and running, it's instant. If NFS is disabled at boot and started manually afterwards, it start instantly. Once running, NFS behaves normally. The backup server has two ethernet ports, connected via a switch to the main server, which also has two ethernet ports. All ports are configured via DHCP from a router, with all addresses reserved on the router so that all important devices are kept at the same locations.
View 2 Replies
ADVERTISEMENT
May 20, 2011
I'm using Opensuse 11.4 updated from 11.3, update from 11.2 updated from. I'm mounting at boot time (in fstab) some shares from an opensuse 11.2 server. Mounting worked fine in 11.2, 11.3 and also in 11.4 but suddenly (maybe an automatic update?) It stopped working.... sometimes.
Sometimes they are mounted properly but sometimes they aren't. When mount fails I get a log error: "rpc.statd is not runninf but is required for remote locking. Either use '-o nolock' to keep locks local or start statd"
If I run manually (as root) mount -a the shares mount properly always, so I thought it was a problem of timing (the service starting late) so I tried to get a script to run after the network initialitation, the script does: "mount -a". But it doesn't work either.
View 3 Replies
View Related
Jul 28, 2010
i want to know what are all possible ways of mounting network drive during boot up.
I want to mount a remote drive which contains some config file of several process,the drive should be mounted at boot up so that all the configuration files are available during boot up.
View 1 Replies
View Related
Apr 2, 2011
Q: How can I allow my users to mount a cifs share without an entry in fstab in OpenSuse 11.4?
I have an answer myself. Until OpenSuse 11.2 I could mount my samba shares by making mount.cifs and umount.cifs setuid root. Today I installed OpenSuse 11.4. Unfortunately mount.cifs isn't anymore allowed to be setuid due to security concerns. Security is not an issue in my case, so I copied the mount.cifs and umount.cifs from 11.2 to make it work again:
1. Download cifs-mount-3.4.2-1.1.3.1.x86_64.rpm from this repository (I use 64 bit):
"http://download.opensuse.org/distribution/11.2/repo/oss/suse/x86_64/"
2. Extract the files mount.cifs and umount.cifs from the rpm and copy them to /sbin
3. Make them setuid root:
Code:
linux-y5qw:~ # chmod u+s /sbin/mount.cifs
linux-y5qw:~ # chmod u+s /sbin/umount.cifs
4. Mount your cifs shares as a normal user:
Code:
martin@linux-y5qw:~> /sbin/mount.cifs //192.168.2.2/data /home/martin/data/ -ousername=martin
Password:
View 1 Replies
View Related
Dec 13, 2008
I know this has been covered in many threads before, but I'm stuck not finding my exact situation or an answer. I'm a newbie using a Debian Linux machine as the client and Windows XP machine as the server. I have successfully mounted the XP Network drive on the Linux machine using commands from the root terminal:
mount -t smbfs -o username="Windows Username",password=windowspassword //XPcomputername/folder /mountpoint/
However when I put the command in the ect/fstab file as suggested in several posts, I don't get any result on boot up. I.e. I can't get the network drive to mount on start up, I always have to manually mount it from the root terminal.
View 7 Replies
View Related
Jul 18, 2010
I am running openSUSE 11.3 and I have a Buffalo LS-CH1.0TL NAS (it doesn't support NFS) that has all of my media and backup files stored on it. I can access the NAS just fine in Dolphin, but when I try to setup a music folder in any of the media programs (Amarok, Banshee, Rhythm Box) I am confined only to the drive on my computer. There are no options to browse a network share.
So, I guess I have to mount the drive. How do I do this? Is there a GUI I can use to do this, or is this something I need the command line to do? If so, what's the code I need to input to my fstab?
View 9 Replies
View Related
Jun 6, 2011
While booting my fedora15, it gets stuck for about 5-6 minutes. Previously there was no problem. I don't know what made this problem. After going through the boot process, error occurred during network process. Using following command I got the result.
Code: # systemctl status network.service
network.service - LSB: Bring up/down networking
Loaded: loaded (/etc/rc.d/init.d/network)
Active: failed since Sun, 05 Jun 2011 21:13:55 +0545; 11h ago
Process: 845 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/network.service
Also right after the long pause following messages are printed
Code: 261.742053 usb4-1: device not accepting address 4 error -7
261.794087 hub4-0.1.0: unable to enumerate usb device on ports
I noted it down as soon as I saw the message after that long pause.
View 4 Replies
View Related
Jan 18, 2011
I am posting this as I have tried several times to work this out. I have read article after article, post after post and tutorial after to tutorial to sort this issue. I have an Ubuntu 10.04 machine running as the LDAP and NFS server with two Opensuse 11.3 desktop machines. Both of the Opensuse machines can login using the LDAP server for authentication and this works fine. The server also exports the NFS Shares no problem but I am unable to mount the shares from the Opensuse machines. I have been using Yast, NFS Client to mount them.
Yast NFS Client can see the shares and lists them however when I apply the settings it states:
'Unable to mount entries in etc/fstab' I need to mount the shares according to the LDAP details as I want the users to be able to access their files no matter which machine they login at. Can anyone shed any light on the issue. Any help would be great and I would be enternally grateful as I am now beginning to pull my hear out slightly.
View 2 Replies
View Related
Jul 18, 2011
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
View 1 Replies
View Related
Jan 19, 2010
Is there are fundamental difference in using NFSv4 instead of NFS while mounting drives?What advantages NFSv4 has versus NFS mounting?
View 1 Replies
View Related
Jan 26, 2010
We recently moved to a new home and I am trying to get my home file/print server set up again. Thanks to swerdna's excellent website, I got my server box (just upgraded from 11.0 to 11.2) running Samba and serving my shares over the network, and my "client" machines can access them without a problem.However, I'm not having much luck setting up CIFS mounts on my Linux desktop. I have my all-purpose user added to the Samba auth list (via smbpasswd), and configured my client as swerdna's howto's specify, and I can access the files just find. However, when I try to mount the shares with this command:
Code:
mount -t cifs -o username=klein,password=klein //192.168.1.70/sharedmedia /home/zak/SharedMedia/
I get the following error:
[code].....
View 2 Replies
View Related
Aug 12, 2011
I want to setup a SSL encrypted WebDAV share on my OpenSUSE 11.4 server that is accessible from the internet. Everything is working fine when using Windows XP or Linux clients, but a connection with Windows 7 is not possible ("the selected folder is not valid").
I already searched for a solution to this problem I tried several setups:
- with and without encryption
- with Basic authentication
- with Digest authentication
- without authentication
I did not have success so far. Is there any solution to this (except not using Windows 7)? Or can anyone confirm that this should be working (and maybe my configuration is messed up)?
View 1 Replies
View Related
Mar 14, 2011
I have a D-Link DNS-323 network drive which mounts at multiple points to my filesystem when booting. I had to make some fstab changes when I upgraded from 11.2->11.3 last year, and now the same thing seems to be happening since I've upgraded to 11.4. When I login to my profile the desktop hangs and no icons appear. I cannot open a Nautilus window, or access ALT-F2, however just about every other program works fine. Since I disabled the fstab lines (slightly modified when copied here to generalize):
Code:
#//192.168.123.xxx/SHARED-FOLDER1/User-folder /home/user/Documents cifs guest,_netdev,uid=user,gid=users
#//192.168.123.xxx/SHARED-FOLDER2 /home/user/SHARED-FOLDER2 cifs credentials=/home/user/.scripts/.creds,_netdev,uid=user,gid=users 0 0
the desktop icons load and Nautilus works. Can I adjust my fstab syntax to correct this and get my network drives back? I think last year the issue was in referencing the ".creds" file...
View 4 Replies
View Related
Apr 8, 2010
What must be done to mount an ext3 partition that's on another computer which is connected via utp crossover cable? I can't seem to figure this one out, though I've read somewhere that it can be done, and I'd like to know how.
View 2 Replies
View Related
Nov 18, 2010
I need to mount a windows share on my OpenSUSE 11.3. I get it using the mount.cifs command (by itself or using cifstab), but only root can rw file. I try the uid/gid parameters (also using forceuid) and the file_mode/dir_mode parameters, but I get the same behavior: all files and directory with rwxr-xr-x permissions and root/root (user/group). I read the whole section FILE AND DIRECTORY OWNERSHIP AND PERMISSIONS in man mount.cifs but nothing works.
View 9 Replies
View Related
Feb 6, 2011
I haven't used encryption previously but through that for better security, I would enable it on one of my disks. I went though the process and when done, copied data to the device etc. My house had a powercut the other day and I noticed that the device did not mount automatically upon restart. Unfortunately, I have forgotten the de-cryption password and have lost access to my data. Is there a way of either recovering my password or getting the partition to mount without the password so I can access the data, copy/back up and then re-create the partition without encryption?
View 2 Replies
View Related
Apr 13, 2010
I updated Samba to 3.5.1 as shown in: Fixing "Authorization Dialog" bug in Samba for 11.2 - openSUSE ForumsWhen I copy files between two copies of Samba in two openSUSE 11.2 PC's with the new update, I get Samba Process Unexpectedly Died (in Dolphin). This happens going from Computer 1 to 2 or 2 to 1, it does not matter and the error is the same.
After reverting back to Samba version 3.4.2 in both PC's, all files copied between PC's work fine again. Though the "Authorization Dialog" bug is gone, not all seems right with the newest update version.
View 4 Replies
View Related
Jul 22, 2010
I installed opensuse 11.3 in my laptop compaq presario cq40 144TU consisting of Core2Duo T5800 with 4 GB DDR2 RAM. After installation of 11.3 i update the OS from online. i have a cable net with IP address / subnet mask / Gateway / DNS. All are working fine but all of a sudden there was a power cut in our locality and my cable net was delinked.
When the elecricity came again i tried to connect the internet for online updation, but all in vain. No page is openup though the terminal told me that "You are already logged in with process id 1425." When i typed the command to kill the process it said that there is no such process running.
View 6 Replies
View Related
Mar 10, 2011
I am running SuSE 11.3 ( 2.6.34.7-0.7-desktop) on a Dell Laptop I am using an external NAS (QNAP-809pro) that connects to the laptop via iSCSI When my laptop boots I get an error that stops the boot process and gives me the filesystem repair terminal: ther I have to comment out the iSCSI lines from /etc/fstab and reboot normally. This is my fstab with commented-out iscsi mount lines
Code:
/dev/disk/by-id/md-uuid-16c447dd:e92ee13a:7e2f04b9:2688e99d-part5 swap swap defaults 0 0
/dev/disk/by-id/md-uuid-16c447dd:e92ee13a:7e2f04b9:2688e99d-part6 / ext4
[code]....
View 1 Replies
View Related
Jul 14, 2011
Just the last day or so, I've noticed a long pause when I boot my laptop, with lots of disk activity. dmesg says:
[Code]...
Why would there be a 15-second pause (during which the disk is slammed) between mounting root and mounting swap? During this time I see nothing but a blank purple screen, there are no cycling dots or text scroll. Is this normal and I'm just freaking out over nothing because there's no indicator of progress? GRUB default boot options: quiet splash nomodeset video=uvesafb:mode_option=1920x1200-24,mtrr=3,scroll=ywrap vt.handoff=7
View 9 Replies
View Related
Jan 3, 2010
Am in the process of upgrading from an ancient OpenSuSE release (7.2) to 11.2. One thing I have been unable to do that worked fine under 7.2 is remotely mounting a compact flash drive from an XP machine. Worked fine for many moons on 7.2:
# mount -t cifs -o rw //xpbox/'cf (H)' /cf0
I get:
mount error(12): Cannot allocate memory
Other cifs mounts of hard disks work fine.
I found a posting that says this means the memory allocation error is from the XP side. It says to fiddle with the XP registry, specifically IRPStackSize. I was not confident this fix would work since there should not be anything significantly more consuming with 11.2 compared to 7.2, and indeed, I got the same error after changing the parameter to 18 and rebooting the XP machine. Any ideas? I have some suspicion that the space and parenthesis in the share name might be fouling up someone. XP forces the share name to this for some reason.
View 1 Replies
View Related
Jul 4, 2010
i have 2 partitions on dmraid. I am not able to configure them to mount with yast; yast partitioner gives an error stating that it can't mount a file system of unknown type. I am able to start the dmraid devices manually and mount them manually.
See bug:
https://bugzilla.novell.com/show_bug.cgi?id=619796 for more detailed info.
View 2 Replies
View Related
Oct 8, 2010
I am trying to get my computer to mount an external folder on a different machine with :
Code:
//192.168.1.200/share1/mnt/Documents cifsauto,users,username=user,password=useruser,uid=Alastairo,gid=users0 0
[code]....
View 5 Replies
View Related
Jan 4, 2010
Sometimes openSUSE boot ends with these errors:[url]
(I do not know why it prints an error on Ext2 filesystem when the disk is formatted Ext4...)
[url]
Here is my Fstab:
Code:
View 9 Replies
View Related
Aug 10, 2010
I get the error: Could not start process Unable to create io-slave: klauncher said: Unknown protocol 'magnet'.
View 3 Replies
View Related
Apr 14, 2011
I have recently installed Suse 1.4_64 on my system. During the boot process I experience two delays of about 30 seconds, every time I boot up.
View 9 Replies
View Related
Jul 9, 2010
I was wondering if anyone can tell me what file, etc is the equivalent of ARCH's /etc/rc.sysinit? I need to know this because I am having many problems making the new nfluxos iso's for ARCH because of how ARCH now mounts stuff at bootup
due to whatever changed in udev or udisks or something else in ARCH now, when I make the system into a livecd it doublemounts everything when booting for example; output of "mount" in nfluxos with 3.4squashfs udev 151
Code:
[root@nfluxos ~]# mount
rootfs on / type rootfs (rw)
aufs on / type aufs (rw,relatime,si=4ce08f22,nowarn_perm)
none on /proc type proc (rw,relatime)
none on /sys type sysfs (rw,relatime)
[Code]...
View 1 Replies
View Related
Jan 6, 2010
I have a Dell XPS M1330 with Opensuse 11.2 and Windows Vista Business in a dual boot hard disk.
I was using Fedora 11 before Opensuse, and it was fast and performed well. However I installed Opensuse because I like KDE 4.3 and this is the best KDE distro.
After the last kernel update my system lost initrd, I restored creating an initrd with chroot, mount and mkinitrd from a rescue disk. After first boot, I reinstalled the kernel update, so the initrd was replaced by the new one created in the update.
However, my system is very slow, I don't know where to look for bad configuration or anything else. The boot process took 220 seconds.
Here is my bootchar,
[URL]
View 9 Replies
View Related
Aug 4, 2010
Every time I boot up OpenSUSE 11.3 it hangs at the same "position" for approximately 3 minutes and then continues to boot. Unfortunately I see no corresponding error log e.g. in dmesg output. Hence, I don't know what is the reason for that. Here is my dmesg output. The delay occurs at 20 seconds after beginning of boot process (line 1085). I also analyzed the boot process with bootchart.
My computer: Notebook Lenovo ThinkPad R400.
View 9 Replies
View Related
Jul 27, 2011
This is a thread I've moved over from the install forum and is hopefully more focused. Sorry if I have violated some protocol. Problem I have a new machine build configured to dual-boot Windows 7 and OPENSUSE 11.4. Network performance in Windows is very good but network performance in OPENSUSE is very poor.
[Code]...
View 4 Replies
View Related
