OpenSUSE Network :: Integrate Amavisd Milter Mail Delivery Hangs At 63%
Mar 31, 2011
I am trying to built a mailserver using Sendmail + cyrus + amavisd + TLS authentication. All programs used are the latest versions shipped with OpenSUSE 11.4 I have set-up successfully sendmail+cyrus and I can send e-mail anywhere without a problem using authentication. But when I try to integrate amavisd-milter mail delivery hangs at 63% and the following message appears in /var/log/mail
[code]....
I have also uninstall all involved programs, deleted all conf files and re-installed them but alas without any success. The same configuration was used at least once with almost all previous SuSE/openSUSE versions since 1998.
View 1 Replies
ADVERTISEMENT
Mar 22, 2011
I have gone through a good number of distros all the way back to Slackware but I'm struggling to get my brain moving in the right direction again. I am working to enable sendmail and, from what I've read, it appears that newer version of sendmail are installed with milter but I can't seem to locate this. I am running v11.4 so I'm wondering if this is just not the case? I don't have a problem reconfiguring/recompiling the sendmail conf files but would rather not if it's not required. For the record my ultimate goal is to have the spamassassin and clamav milter's installed and using the home server as our primary email.
View 7 Replies
View Related
Feb 10, 2010
host postfix/qmgr[13020]: warning: connect to transport amavisd-new: No such file or directory
How can I fix this error? I have searched the inet but can't seem to find a solution.
View 3 Replies
View Related
Mar 23, 2010
start working with SA+Amavis+clamd+postfix+dovecot.will be my filter:spamassassin+amavisd-new+clamd. 1 Server will be my mail server: postfix+dovecot. Like u see, the emails from the outside reach first the filter, latter the mailbox. Now, I have seen in my log files, that if I receive a email to a "unknown user", the filter doesn't detect this and process the email and send it to the mail server. Exist a way to setup the filter to first check if the user exist and them apply all hard work and latter send the email to the mail server
View 3 Replies
View Related
Aug 12, 2009
Recently we are receiving lots of spam email specially ( Viagra). I want to use spamassassen to filter the spams so I need to configure procmail as local mail delivery agent.At the moment I am using prosfix for mail delivery agent and our server is Centos 5. I did google it but couldn't find a good instruction.
View 3 Replies
View Related
Jun 15, 2011
I run a mailserver and this is bothering me quite abit. Being going on for about a month now. Running exim4 and dovecot with exim4u. This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
dsghjytyt@yahoo.com
retry time not reached for any host after a long failure period
This is a copy of the message, including all the headers.
Return-path: <andreas@servar.net>
Received: from ip-81-210-201-120.unitymediagroup.de ([81.210.201.120] helo=holly5)
by gwdebian.net with esmtpa (Exim 4.72)
(envelope-from <andreas@servar.net>)
id 1QWpUO-0000yy-ML
for dsghjytyt@yahoo.com; Wed, 15 Jun 2011 14:46:32 +0200
MIME-Version: 1.0
Date: Wed, 15 Jun 2011 14:44:16 +0200
X-Priority: 3 (Normal)
Content-Type: text/plain;
charset="iso-8859-1"
Subject: =?iso-8859-1?Q?lizzie_VIAGRA_=C2=AE_-61%_discount?=
Content-Transfer-Encoding: quoted-printable
From: andreas@servar.net
Reply-To: "RE: Your Recent Job" <Posting>
To: dsghjytyt@yahoo.com
X-Mailer: Microsoft Outlook Express 6.00.2900.2180
Message-ID: <CHILKAT-MID-3b7cf1d5-b3e7-3d78-5c1d-713c0e381cb9@holly5>
X-Antivirus: avast! (VPS 110615-0, 15.06.2011), Outbound message
X-Antivirus-Status: Clean
X-Scanned-By: unscanned primary on gwdebian.net (109.108.198.243); Wed, 15 Jun 2011 14:46:32 +0200
Then alot of random text
I run OSX on my everyday computer so this is not me sending out stuff since the above mail says Microsoft Outlook express has sent it (?) Running a Debian Squeeze server. And I really dont get any other spam due to exim4u setup and spamassasin.
View 14 Replies
View Related
Aug 31, 2010
I am setting up an FC7 box to replace a currently dying server and I'm having an issue with the mail setup. I am using sendmail and dovecot and system users for credentials. I won't include all of their configurations, because that would get long, but I can copy and paste any sections if they are needed.
The problem is all mail is being delivered to the root mailbox in /var/spool/mail/. I setup a laptop on a local network with the server to test things. And just brought up Evolution with one of my test accounts. I was able to authenticate and tried to send a test email to myself. The email went out fine but did not come back in.
View 3 Replies
View Related
May 24, 2010
I'm running postfix with virtual domains and want to modify the delivery path. Right now, I have one path for each user that's found with a database lookup.Before mail hits Postfix, it will have an x-spam-header: yes/no/uncertain field. When mail with x-spam-header: yes the lookup for the path would return /var/mail/domain/username/.Inbox/.spam.
What I think I'd like to do is parse the x-spam-header value in postfix, populate a variable, then use the variable to modify the path lookup in the database. header_checks has a FILTER option, but that's just beyond my skillset at the moment.Or, maybe I'm better off modifying the path with a procmail recipe? Currently, my mailbox_command = procmail -a "$EXTENSTION"
View 6 Replies
View Related
Aug 20, 2009
I got a system with RHEL 5.3 Server with dovecot, sendmail, and thunderbird. I have found tons of stuff online about configuring a mail server, but little of it tells me how to get mail from a client to the server. I've tried to work with Postfix, Pine, Sendmail, Thunderbird, and the list goes on. I'm probably so confused now that I'm not even going to convey this properly, but let me try...... I got a system called wks90 which I decided would be my mail server. I installed dovecot, sendmail, and thunderbird. Then did some basic configuration via stuff I found online. Now the test, from the command line I use the simple "mail" command which succeeds. I bring up thunderbird and eureka!!! there is a message in /var/spool/mail/george.
Now here is where I get confused and things fall apart. I go to another system named wks50. I try some similar setup in sendmail trying to point it to wks90 as the server, I assumed dovecot was not needed, made and entry in /etc/aliases, and will use my thunderbird on wks90. So at the wks50 command line I mail -v to george@mydomain.priv. The message seems to work ok, but still goes to wks50's /var/spool/mail. How in the name of sanity do I get the mail to go to /var/spool/mail on wks90? OR somewhere that is centrally located. I tried to mount /var/spool/mail to wks50, but then wks50's mail to root started queueing up and going nowhere.
I guess I got the whole concept of mail wrong somewhere in my thinking. I just want the mail from any client to wind up at one server (wks90) and in a central location on wks90 so that any client like wks50, wks60, and wks70, using thunderbird, can read the mail from that central location. To me this sounds like I need to mount that central location to each client, but how do I then deal with the queuing root mail? Or is sounds like a need something like that old "movemail" command to take it and move it. I have another server that is the HOME server (server1). The physical location of all $HOMEs is here i.e. /home/george.
View 4 Replies
View Related
Nov 11, 2010
send email i got bouncing error .see below error;
554 Your access to this mail system has been rejected due to the sending MTA's poor reputation. If you believe that this failure is in error, please contact the intended recipient via alternate means.
View 1 Replies
View Related
Feb 9, 2011
i have a domain where i can send emails to any domain ,unfortunately i cant receive email from any domain . am getting the below error ;
T=remote_smtp: retry time not reached for any host after a long failure period
View 2 Replies
View Related
Apr 30, 2011
Here is the senario...
2 round robin dns servers
x.x.x.1 mydomain.com (hostname)
x.x.x.2 mydomain.com (hostname)
My problem is that when I try and send an email that is part of the domain, it ends up trying to deliver it locally. I realize it is supposed to, but I don't want that for non-users of the server.
I want to be able to deliver certain emails []@mydomain.com remotely. (info@mydomain.com)
exim4 setup "internet site; mail is sent and received directly using SMTP". This works well as long as it is not an email from mydomain.com.
Is there a way to have exim check the users first and then deliver based on local user or not?
Next question. Is having the domain name as the hostname the best way to setup a round robin? (web server)
View 1 Replies
View Related
Dec 1, 2010
I currently use mail-notification to alert me to new email, it sits in the system tray. When a new mail comes in it alerts me as such. I DO NOT have to have thunderbird open or running to be notified. I want to replace mail-notification with indicator messages. I want the same functionality that I got with mail-notification. That is, to have an icon sitting in the notification area that alerts me when new mail arrives. I do not want to have thunderbird open for this to occur.
I have lib-notify installed. I have the notify add-on installed in thunderbird, I have indicator-messages installed. I have thunderbird.desktop in /usr/share/applications I have a file called thunderbird that has one line which is the path to the desktop file above in /usr/share/indicators/messages/applications/ With this when i click on the icon in the notification area i DO see the listing for thunderbird, but the icon is not correct, it has a black bacground with a red circle in it with a slash. When i click on this item thunderbird launches. I do not recieve notificaion messages (i.e the letter icon does not turn green) unless i open thunderbird and check for messages manually. This defeats the purpose of having a notification in the system tray. Additionally changes made to /usr/share/applicatons/thunderbird.desktop are not reflected in the indicator.
View 9 Replies
View Related
Dec 19, 2010
My evolution mail is not able to integrate my gmail chat and facebook chat.It shows this error-
Disconnected-network error
View 1 Replies
View Related
Nov 4, 2009
I am not sure why it does not install, it hangs(hangs for 10 minutes) and the only way to get out of it, is to ctrl-c, and then it gives error yum install amavisd-new
[Code]....
View 3 Replies
View Related
Mar 3, 2011
Midnight Commander startup is usually instantaneous, but when the network (eth0) is down, mct takes over a minute to start.This is a known problem. See:#40 (savannah: MC doesn't open if network gateway inaccessible.) (07 Jan 2007)for example. The problem seems to be caused by mc's use of samba. Is there a known solution or circumvention? The above file advises me to "comment out the eth0 interface from the smb.conf "; however, my /etc/samba/smb.conf seems to have no eth0 interface.The "man mc" file mentions that "smbfs" is one of the virtual file systems used internally by mc. I tried reducing the "vfs" timeout in the ".mc/ini" file from 60 to 5, but this had no effect on the startup time.
View 5 Replies
View Related
Aug 6, 2010
I have freshly installed OpenSUSE 11.3 64 bit and reimported my old openvpn connections via Network Manager. Connection can be established fine, but after 3 to 6 seconds (pings) it will stop to receive any packets on the tun device.
I tried disabling the firewall, starting openvpn manually, no avail. I checked the message log and the openvpn output, no messages recorded.
View 1 Replies
View Related
May 27, 2011
I have a couple of nfs shares which I configured through the yast NFS client module. It entered these in my fstab file to start on bootup. A sample entry is:
10.2.1.30:/home/opt/Cindy/homenfsdefaults 0 0
As long as the foreign computer is online all is well. If the foreign computer is taken off line, soon after KDE applications such as Dolphin and the panel freeze, even if I am not using the shares. When the foreign computer comes online again, everything unfreezes on my computer and works fine. Likewise, if the other computer is not online when I boot, there is a long delay while the system waits for the share to come up. Is there something in my configuration that I can change to stop either or both of these problems? I am running 11.4 x86_64 on a wired network with static ip addresses.
View 9 Replies
View Related
Jan 5, 2011
After connecting to any host, the openssh client hangs after I type the password. The strange part is, it only hangs if when I use the wlan card. If I connect my phone to the computer and uses it to connect to my server, it works 100%.
If I use any other computer at the wireless network, it works 100%
If I use putty on the same machine, it works 100%
It is only a problem when I use the build-in wireless card, under openSuSE 11.3, on my Lenovo L512. (note that everything besides ssh works completely).
View 4 Replies
View Related
Jul 20, 2010
I am having an issue that the pop-up for Network Manager hangs and will not go away covering part of my screen. This started after the system locked-up. If I try to edit the pop-up setting in gnome it the dialog box lockup and has to be forced shutdown.I am runnning openSUSE 11.3.
View 4 Replies
View Related
Dec 30, 2009
I have a SMB share being mounted during boot using a /etc/fstab entry.All that seems to work fine, but on shutdown or reboot I found that the system hangs for a variable period trying to unmount the share. It appears from the log that the unmount is happening after the network connections are closed.Is there someway around this, or is there some other way I should be mounting the share so that it is closes successfully at restart or shutdown?
View 1 Replies
View Related
Jan 2, 2011
When accessing an NFS mount for a large (200MB+) file transfer, the transfer starts rapidly, then becomes slower and slower until it hangs. On several occasions, it has frozen the client machine. Both client and server are set to default to nfs version 3. Slowdown and hang also occur when connecting to FreeBSD NFS mounts.
Presumably (I hope), there is some sort of configuration for the client that needs to be set. what should be changed in the configuration? This worked out of the box in OpenSUSE 11.0.
View 9 Replies
View Related
Mar 16, 2011
The module e1000e is loaded into system. At addition VLAN the system hangs at a stop VLAN or configure other devices (sound, video). In OpenSuSe 11.3 it worked correctly.
MB: ASUS P5Q-ME DO / NetCard: Intel 82567LM-3
View 2 Replies
View Related
Jun 3, 2010
Currently, his mail is coming in on 2 addresses. He'd like to take the mails from one source and add it to the other.
The idea is to fetch the mails from the least used address - on the provider's POP server - and forward it to the other address. He can use the SMTP server from the same provider to send off the forwarded mails.
This operation would be cron'ed to run every few minutes.
View 1 Replies
View Related
Aug 6, 2010
I have OpenSuse 11.2 installed and I'm currently testing out Magento Commerce which is working as expected. In order to create fake customers the application requires a unique e-mail address for each customer. I currently use postfix and have all the e-mails being sent to my providers domain which i only have 2 email user accounts. How do i set up virtual e-mail addresses like joeblog@fakedomain.com and maryblog@fakedomain.com such that when the Magento Application sends emails to these addresses I would like to access the corresponding mail boxes on the same host. (i.e. the machine i run Magento on)
View 1 Replies
View Related
Dec 31, 2010
I have OpenSuse 64bit running a web site. I have a form on this site here:- Dynamic Systems Group The script itself works and I have tested it on another hosted server and it works fine. However on my server the email the script sends never arrives, which must be a problem with my Postfix settings I guess. However I also have two pages on my site for testing sending of mail, which BOTH report a postive result:-
[URL]
However even though these pages report successful send the mail stil never arrives. I have looked at many pages and forums on the internet and I am really, really confused as to how to set up Postfix. On the Suse box I have the Mail Server configured in Yast to send mail via my Gmail.com account using TLS and authentication but still no success!
View 9 Replies
View Related
Oct 11, 2009
I have a couple of servers that are scripted to send cron script output logs to my email address (a Gmail address). Mailx is what I am using, but I didn't have to configure anything; I installed it, and it just worked with the following command: mailx -s "SUBJECT" -r FROMMYADDRESS TOMYADDRESS < FILETOCATANDSEND
This occurs every Saturday and Sunday at noon after my backup scripts run.
I noticed yesterday that I did not receive these logs, so I logged into the machine, started 'mail' and saw messages like this: This is the mail system at host media.deagle.lan.
[Code]....
View 9 Replies
View Related
Feb 15, 2010
I just set up a new router for our home office. I've enabled traffic logging, and I'd like to have the logs emailed to me. However, in order to configure email-notification, the router needs and outgoing mail server. Forgive me, but I don't really understand the terminology being used here. I've googled this a bit, but I'm not sure I now what "outgoing" vs "incoming" mean in the context. I tried using my gmail account as the outgoing mail server (smpt.gmail.com) but it requires TTLS encryption, and there's no option for that on my router.
So I figured I'd setup a simple mail server on my local network. I have a dedicated server machine, so I'd just configure a mail server there. But I got stumped at the first input box (in the yast module):"Outgoing Mail Server".That's what I wanted to use this server for. What is this "outgoing mail server"? I understand it in a normal emai context (I think) but this is confusing me. I've read through the HowTo on the openSUSE wiki, but it still doesn't answer this question.Isn't there some way to have a simple, local mail server (without MX records and the like) so I can send email from a local machine?
View 2 Replies
View Related
Apr 28, 2010
I am installed Opensuse 11.2 and maked all configurations and installations for Mail Server Yast. ( Postfix, Ldap ) In ldapadmin what class objects i need insert to configure e-mail client ? I am choised for test suseMailAccess and in suseMailClient inserted my e-mail and what i insert in suseMailAction ? Anyhere know howto install and configure this service ?
View 5 Replies
View Related
Jun 10, 2010
I have a domain name relik.ath.cx with a mud and an html page and now Im working on my own personal mail server preferably with the first email on it [URL].
View 6 Replies
View Related
