OpenSUSE Network :: Sending Mail From Webserver

Dec 31, 2010

I have OpenSuse 64bit running a web site. I have a form on this site here:- Dynamic Systems Group The script itself works and I have tested it on another hosted server and it works fine. However on my server the email the script sends never arrives, which must be a problem with my Postfix settings I guess. However I also have two pages on my site for testing sending of mail, which BOTH report a postive result:-

[URL]

However even though these pages report successful send the mail stil never arrives. I have looked at many pages and forums on the internet and I am really, really confused as to how to set up Postfix. On the Suse box I have the Mail Server configured in Yast to send mail via my Gmail.com account using TLS and authentication but still no success!

View 9 Replies


ADVERTISEMENT

OpenSUSE Network :: Configuring Msmtp For Sending Mail Through GMAIL?

Feb 17, 2010

Does anyone know how to configure msmtp to sed mails via gmail?

In mandriva it is done by modifying a file :

etc/msmtprc.conf

where you state your gmail account details.

Currently if I try to sent an email with my recently installed msmtp, I get the following message:

msmtp: account default not found: no configuration file available

View 1 Replies View Related

OpenSUSE Network :: Configure Lamp Server For Sending Mail

May 16, 2010

I have a LAMP server and need a web page to send email messages. I could do it with my Win 2k server through my cable service but can't seem to get it to work here.

View 9 Replies View Related

Ubuntu :: Get The Mail Applet To Light Up Green By Sending Myself Mail In Lucid?

Apr 30, 2010

in Lucid ive been trying to get the mail applet to light up green by sending myself mail. Does this applet only light up when IMs r received or does this also work with evolution and if so what might i have done wrong in evolution, ive tried it with evolution open and evolution closed.

View 8 Replies View Related

OpenSUSE Network :: Configure A Webserver In Apache 11.3?

Mar 5, 2011

I am running 11.3 64bit. I need to set up a simple web server, and I was trying to follow this tutorial to do it HowTo: Configure a Linux Apache Web Server on Suse/openSUSE for SSI, Includes, CGI, Common Gateway Interface, AddHandler, ExecCGI, AllowOverride, htaccess, DocumentRoot The web server is running but this part could not be applied and I need to change the ownership. it seems the command lampserver does not exist.

[Code]...

View 8 Replies View Related

General :: Sending Mail From Virtual Host Fails "mail For Domain.com Loops Back To Myself"

Jul 1, 2011

I have two servers relavant here: mail.domain.com (1.1.1.1) - which is the nameserver and the mail server for domain.com. www.domain.com (2.2.2.2) - which is the www subdomain for domain.com domain.com (cname www.domain.com) - an alias for www.

The zone file for domain.com lists mail.domain.com as the MX server for domain.com. 2.2.2.2 is actually being served web pages as a virtual host. It's real hostname is www.anotherdomain.com. Mail for domain.com works pretty well, in general. However, if I attempt to send mail from www.domain.com (or its alias domain.com), I get "mail for domain.com loops back to myself" in the postfix logs. On 2.2.2.2 /etc/postfix/mail.cf has mydestination = www.anotherdomain.com, localhost. How do I tell postfix on 2.2.2.2 that mail for domain.com needs to be delivered to mail.domain.com?

View 1 Replies View Related

OpenSUSE :: Kmail: Contacts From Addressbook Missing In "to" Field When Sending Mail?

Mar 12, 2011

Opensuse 11.4 KDE

I've imported a vcard addressbook in kontact. When I create a new mail and start typing something in the "to" input field, no contacts are automatically added. When I click the "select" button, nothing is found, except for the recently added email addresses. Nothing from my imported addressbook though.

This also didn't work in opensuse 11.3 KDE. Am I doing something wrong here?

View 2 Replies View Related

OpenSUSE Network :: Firewall Sending Messages For Allowed Port?

Mar 23, 2010

In the firewall, I opened port 5900 for TCP traffic. Now the console is displaying packet information whenever a connection is made. Why does it send a message to stdout/stderr for an allowed connection? How can I stop it? Logging level is set to critical only, and not-accepted packets should only be logged for the internal and DMZ zones.

View 1 Replies View Related

OpenSUSE Network :: Dhcpcd Not Sending DHCPDISCOVER/-REQUEST At Boot, Timing Out?

Aug 2, 2010

we have a problem with dhcpcd at boot time on any openSUSE version from 11.0 to 11.3. It seems that a number of workstations never send out DHCPDISCOVER or DHCPREQUEST at boot time, we have verified this with packet dumps. The dhcp client progress bar is displayed on the console but eventually times out, goes into background and the system continues booting.This is a problem because the timeout takes a long time and users have to wait. Sometimes the display manager is even started but users cannot using LDAP authentication. Eventually these systems just continue to use their old lease and networking works.Curiously, when we do a network restart after boot, the clients send DHCPDISCOVER/-REQUEST normally, we only have this problem at boot time.

On the server side we're using ISC dhcpcd-1.3.22pl4-223.13 on SLES 10 SP2. I have read about others who had the same problem, they switched from dhcpcd to dhclient. I have also tried this, but for us dhclient is not an option for a number of other reasons. Another thing I have tried is setting DHCLIENT_SLEEP ("Some interfaces need time to initialize. Add the latency time in seconds")o two minutes to give the interface time to initialize.nfortunately this didn't change anything.

View 6 Replies View Related

Ubuntu :: Sending Mail With Postfix

Jan 10, 2010

I'm simply just having trouble sending mail with postfix. I have all my hostnames, rdns setup properly. I also have iptables open on port 25.

View 9 Replies View Related

Red Hat / Fedora :: Sending Mail To A Group?

Dec 8, 2010

l to a group in Linux? for example, I want to send a notification mail to 20 people and I want to create a group of these 20 people and want to send them the notification

View 5 Replies View Related

Software :: Automatic Mail Sending?

Jun 11, 2009

I am using Ferdora 6 OS on which I installed CVS. So whenever I make any changes in CVS, notification mail must be sent to few users.

View 2 Replies View Related

CentOS 5 :: Sending Mail From Terminal?

Aug 24, 2009

cannot find what should I do, which conf should I edit to make it work. I cant send email from command line.

Is it necesary to have mail server setup? Hope not, just want simple txt mail sent. I tried MUTT and MAIL.

View 1 Replies View Related

CentOS 5 :: Sending Mail From Localhost?

Feb 13, 2010

I want to send mail to potential customers from my localhost server in my SOHO. I have a web site hosted with a company called geek hosting [URL], so I have access to the mail services through them... I want to their mail server to push things out to the world form my localhost server.

I do have a registered domain name which the hosted site runs under

the domain name for my centos 5.4 server is localhosthost.localdomain.

View 2 Replies View Related

CentOS 5 :: Not Sending Some Mail Through Wordpress?

Dec 23, 2010

I am very new to CentOS and running a server in general. I managed to get a server setup with CentOS, and it's running a wordpress driven social networking site. Everything is fine except sometimes my server won't send registration/activation emails to some email addresses. This is a huge problem because people signup but then can't activate their account. I don't understand why its sending some and not sending others based on the email domain? The guys at wordpress said "it's that your server does not support SMTP or at least wp_mail() in its normal form" but that doesn't mean much to me.

View 3 Replies View Related

Fedora :: Sending Email Using Mail Program?

Apr 24, 2010

How is it possible to send email using the "mail" program? I tried:
echo "testing" | mail -s "test" myaddress@gmail.com
But nothing happened. I made sure that the sendmail daemon was running before I tried. Is there anything else that I have to set up first?

View 5 Replies View Related

Ubuntu :: Sending Mail From Command-line?

Jan 5, 2010

I have kubuntu 9.10 and I would like to configure Ubuntu to can send mail from command line with mailx. I've saw that I need to install a MTA. But I don't know wich install and how.

I follow this tutorial:

[URL]

But when I try to send a message, in the mail.log says me:

Code:
Jan 5 10:21:33 david postfix/smtp[3795]: 41AEA41DBE: to=<pepelu@gmail.com>, relay=alt1.gmail-smtp-in.l.google.com[209.85.223.73]:25, delay=1086, d
elays=1022/0.01/32/32, dsn=4.7.0, status=deferred (host alt1.gmail-

[Code].....

View 3 Replies View Related

Ubuntu :: Sending Mail From Internet Page?

Dec 28, 2010

When I sending mail to defined mail on the internet page I have to configure Evolution and open it for sending. Is it possible to send mail without opening Evolution. Just send to defined mail on internet page.

View 8 Replies View Related

Ubuntu :: Sending Mail Via Smtp.gmail - Php ?

Feb 25, 2011

I want to send mails via gmail with php. I need to know how to configure main.cf, php.ini, postfix,smtp... and all what is necessary. I tried a lot but no results.

View 5 Replies View Related

General :: Mail Not Sending To Internal Addresses

Sep 4, 2009

I'm using the mail command and I am able to send mail to my gmail account with out any problems. However when I send mail to deco -at- mycompany.com I nothing happens and no mail ever arrives in my mailbox. It might be worth mentioned that my centos5 is a virtual machine on the same server as the company exchange mail server.

View 1 Replies View Related

General :: Sending Mail With Mailx Version 12.1

Jul 2, 2010

GNU/linux kernel 2.6, Slackware 12.0.

I ran mail (aka mailx) and opened an account foo. If I remain inside the program, the command 'account foo' prints the account data. Good. But if I exit the program, and rerun it, then the command 'account' has no output which is to say I have no account.

View 1 Replies View Related

Security :: Auto Sending Mail On Deletion?

Apr 13, 2010

i m using centos 5.4 for Data Server, there i hv shared a directory to store data. i want, when ever owner of that data does delete any thing from directory, system should send me a mail with logs of that deletion action with the detail some thing like bellow

1- IP of system, from where owner did access the server and delete the data.

2- Date, Time and Name of File with Path.

These logs should be sent me by email automatically.

View 2 Replies View Related

Server :: Postfix - Sending SMTP Mail ?

Oct 27, 2010

I have the following config with Postfix:

Quote:

But it keeps coming up with:

Quote:

Is there any reason from these configs as to why this should be occuring?

This was the guided step by step tutorial I followed: [url]

View 2 Replies View Related

Server :: Sending Mail From Shell Script?

Jul 5, 2011

I tried the command echo "Test" | mailx -s "Test subject" reciever@test.com -- -f Tester@gmail.com

But in the mailbox of reciever, i can find the sender name as Tester@gmail.com. My requirement is to show the sender as 'Tester' alone, without the domain name.

View 3 Replies View Related

Software :: Logwatch Not Sending Emails - No Mail

Jun 8, 2010

I'm trying to get logwatch to email me. I think my logwatch.conf file is okay. I have postfix installed. The mailer as far as I can tell is set correctly ("usr/bin/mail"). When I run logwatch - I get "no mail for aubrey"

Heres my logwatch.conf file:
Code:
linux-qwkb:/home/aubrey # edit /usr/share/logwatch/default.conf/logwatch.conf
########################################################
# This was written and is maintained by:
# Kirk Bauer <kirk@kaybee.org>
#
# Please send all comments, suggestions, bug reports,
# etc, to kirk@kaybee.org.
#
######################################################## .....

View 13 Replies View Related

Software :: Postfix Not Sending Mail - Debug This?

Feb 23, 2010

Postfix is not sending mail, I did a basic test of sending an email locally using the Linux mail command, and nothing was delivered, and I couldn't find an error either.

Where is the log for postfix located?

In main.cf I changed:
myhostname
mydomain
mynetworks
home_mailbox (I want to use Maildir/)

What am I missing?

View 3 Replies View Related

Fedora :: Facing Trouble While Sending Mail Using Sendmail

Nov 30, 2010

I am facing a problem while configuring a sendmail AS MY MTA.My problem is when is try to send mail from root to local user account(Any user existing in my local machine) , i m getting a unknown user error but normal users can successfully send a mail to root but root account does not.I can successfully compile a sendmail.mc without any error and sendmail deamons start successfully.When I Try to send mail from root account to local user Account , i got a Returned mail:see transcript for detail (which Has A following Detail )

View 5 Replies View Related

Ubuntu Servers :: Sending Mail From Multiple Domains?

Apr 6, 2010

how can i configure my server to send mails from about ten different domains i use google apps and want to know if its possible. Because it sends mail but all goes to spam and i have a static ip

View 9 Replies View Related

Ubuntu Servers :: Sending Mail To External Email (Outside LAN)

Apr 14, 2010

I just setup a mail server on my web server and I cannot for the life of me figure out how to send emails to external (as in outside my LAN) emails or receive from external emails. I'm using Postfix with Dovecot and Squirrelmail. I get this delivery report in Squirrelmail when trying to send an email to my hotmail address.

Final-Recipient: rfc822; example@hotmail.com
Action: failed
Status: 5.0.0
Remote-MTA: dns; mx3.hotmail.com
Diagnostic-Code: smtp; 550 DY-001 Mail rejected by Windows Live Hotmail for policy reasons. We generally do not accept email from dynamic IP's as they are not typically used to deliver unauthenticated SMTP e-mail to an Internet mail server. [URL] maintains lists of dynamic and residential IP addresses. If you are not an email/network admin please contact your E-mail/Internet Service Provider for help. Email/network admins, please visit [URL] for email delivery information and support.

View 3 Replies View Related

Ubuntu :: Hide An Ip Address While Sending Through Evolution Mail?

Nov 17, 2010

how to hide an ip address while sending through evolution mail so the recipient cannot see the ip in the email header?

example below: I sent an email from evolution to my gmail account and I can see my real ip address in the mail header 80.x.x.x

Authentication-Results: mx.google.com; spf=neutral (google.com: is neither permitted nor denied by best guess record for domain of email@email.com) smtp.mail=email@email.com Received: from([80.x.x.x] helo=[192.168.1.6])

I can hide my ip using a proxy but what are the other ways of doing this?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved