OpenSUSE Network :: Installing ACL On Strato Vserver (openSUSE 11.1 + Plesk 9.2)?
Aug 4, 2010
after getting the ACL extension and then unpacking I try to phpize, but server comes up with the following error message:wget http://pecl.php.net/get/APC-3.0.19.tgz
tar xvfz APC-3.0.19.tgz
[Code]...
Alternatively I tried pecl install, but with same result. Whats wrong? I have looked in /usr/bin/sed and there is (of course) no file or directory named "sed". What is "sed" and how to recover? Would be nice, if you could give me an indication what to look for.
View 5 Replies
ADVERTISEMENT
Oct 2, 2010
I have a for me very hard to handle problem as I'm quite new to Linux.I want to install openSUSE 11.3 on a virtual Server with nothing more than a ssh shell and root Rights.
Currently running is version 10.3 of OpenSUSE. I tried updating via dist upgrade but at some point it stops with following Error: We do not have enough disk space in /etc or /dev/zerodoes not exist. Exit. error: %post(pam-modules-11.1-5.1.x86_64) scriptlet failed, exit status 1
I know that this is the Result of low RAM and/or swap Memory but in a virtual Server I can't influence those.
PS: The Reason Version 10.3 is in use, are the available preinstalled OSs so there is no higher Version available.
View 9 Replies
View Related
Mar 20, 2010
Until today Plesk 9.3.0 works finely on my ubuntu 8.04 dedicated server. Then i tried to install proFTPd and after that Plesk chashs.
Now i want to reinstall my plest but i have a problem i get lots of error messanges like that
Quote:
How can I remove completly plesk and install it again?
View 2 Replies
View Related
Feb 3, 2010
Suse 11.2 > updated Feb 2 using the Update UI applet.
I had internet connectivity prior to installing the updates. Now I can't reach the internet since installing the updates. I can reach my router, log in to the router I also ping the router but I can not ping the WAN side ip on the router.
When I boot into redmond, no issues, which is what I'm using as I write this.
I have security enabled, WPA2 Personal, not that I think that is an issue as I can reach the router, my server, network printers, and PC's.
I am running a Linksys router but have replaced the standard Linksys software with DD-WRT v24-sp2 build date 12/28/09 std. One note, DD-WRT does hand out IpV6 address but I have disabled FF from using IpV6 address along with the network connection configuration applet from accepting them. (I don't remember the applets name)
In the redmond world this would be a certificate error, is this the same type of an issue? If so how do I fix it?
View 9 Replies
View Related
May 26, 2011
I'm currently using SuSE 11.4 and after running the full online updates and restarting the machine as YAST suggested, I no longer have eth0/eth1 available.
I'm clueless about what to do since I'm kinda new to Linux and at the moment, I'm trying out all the distros before making a full commitment to anyone. So far, Ubuntu has been trouble-free from day one, but I'm willing to give this distro (opensuse) some slack.
View 9 Replies
View Related
Jun 24, 2011
After a recent installation and update I am having problems connecting to the internet even after following the steps in [URL]... Configure a network card in Suse/openSUSE...." It doesn't always connect when I boot and there is no connection icon on the panel nor the KDE desktop. Can someone assist me with this problem?
View 9 Replies
View Related
Feb 1, 2010
I'm trying to add my Samsung SCX4500W printer to my opensuse 11.2 machine running KDE.From Yast->Printer->Add printerI am able to set the printer up, however there is no driver for my specific network printer. Samsung does provide a linux driver but I have no idea what I'm doing when installing peripherals on linux basically
View 3 Replies
View Related
Jul 23, 2010
Add to your repositories
perl
and manually
"http://download.opensuse.org/repositories/security/SLE_10/"
[code]....
View 3 Replies
View Related
Aug 16, 2010
I'm trying to install the drivers for my Wlan card, I've downloaded the drivers in the tar.gz-file from Broadcom and untar-ed it in my /home/<username>/hybrid_wl-folder and cd'ed to it and I try to run "make" but I get an error: KBUILD_NOPEDANTIC=1 make -C /lib/modules/'uname -r' /build M='pwd' make: *** /lib/modules*2.6.31.5-0.1-default/build: No such file or directory. Stop make: *** [all] Error 2
I'm getting really desperate, I need my Wlan on Wednesday. I'm following the README but this is what I get.
View 7 Replies
View Related
Dec 20, 2010
I am a long time gentoo-user (~10 years). Just bought this new laptop and don't want to take the time to compile everything. During my search for a nice binary distro, I found the KDE reloaded CD, which I then downloaded. That was because I had a great hassle to find a Distro which supports the latest KDE, I was used by gentoo. Well, I am very impressed: Installation went flawless and the Distro is very up-to-date.
Well, now to one of my problems: I have this mobile internet stick:
Code:
ID 12d1:140c Huawei Technologies Co., Ltd.
which also gets detected as a modem. So far so good. When I now try to set it up, the KDE networmanager just segfaults badly... This is the output from the error report:
Maybe there is a possibility to set it up command line?
Code:
Application: KDE-Kontrollmodul (kdeinit4), signal: Segmentation fault
[KCrash Handler]
#6 0x00007f60ca29ea7a in ?? () from /usr/lib64/kde4/kcm_networkmanagement.so
#7 0x00007f60ca2981c1 in ?? () from /usr/lib64/kde4/kcm_networkmanagement.so
#8 0x00007f60de2bb87f in QMetaObject::activate(QObject*, QMetaObject const*, int, void**) () from /usr/lib64/libQtCore.so.4
[Code]....
View 1 Replies
View Related
Aug 27, 2010
I am having trouble getting a Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller to work on openSuSE 11.3. Most of the data for the problem is in this pastebin of the output of Framp's collectNWData.sh. I have also downloaded drivers for this card as detailed below.
Code:
stephen@linux-75on:~> zypper se -r drivers:nic -i
Loading repository data...
Reading installed packages...
Also, here is the more complete output of /usr/sbin/iwlist scan:
Code:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
pan0 Interface doesn't support scanning.
View 9 Replies
View Related
Jan 24, 2010
I've installed openSUSE 11.1 in my desktop with default firefox as web browser. Whenever surfing graphical sites Its says flash need to be installed and in the Adobe site which package I've to download? (Yat or tar.gz or rpm, etc.. etc..) and how I can install it.
View 2 Replies
View Related
Oct 21, 2010
I had this issue with Fedora Core 13, so I switched my laptop back to OpenSuse and continued to have the problem. I can do a host lookup for software.opensuse.com and I get a correct response ...
Code:
linux-edxs:/etc # host software.opensuse.org
software.opensuse.org has address 195.135.221.150
linux-edxs:/etc # host download.opensuse.org
download.opensuse.org has address 195.135.221.134
Firefox works. Thunderbird finds my mail servers just fine. SSH works. But then when I try to do anything involving software updates or installation, I get ...
Code:
linux-edxs:/etc # zypper update
Retrieving repository 'Updates for openSUSE 11.3 11.3-1.82' metadata []
Download (curl) error for '[URL]':
Error code: Connection failed
Error message: Couldn't resolve host 'download.opensuse.org'
I've seen others here post queries about this, and I'll tell you what it was in my case: our DSL modem's DHCP server returns its own IPV4 address as the DNS server. When I looked at /etc/resolve.conf, I saw "nameserver: 192.168.50.254" on the last line -- the IPV4 address of our DSL modem. I manually inserted "nameserver" lines for our ISP's two actual DNS servers, and everything magically started working. Why this should confuse some software under Linux, but not other software, is a mystery. It also seems to be Gnome-specific (I didn't have this problem with OpenSuse 11.3 and KDE 4).
Ask if they're using Gnome, and ask them to check resolve.conf. A lot of DSL modems and home/small office routers return their own IP address (i.e., the same as the gateway address) for the DNS server on a DHCP query. The solution is to manually edit resolve.conf and put in your ISP's DNS server addresses manually. Incidentally, just my opinion, but Network Manager needs to make this an option. Under Windows, for example, you can select "automatically assign DNS" or you can enter them manually, even if you're using DHCP. It'd be nice if Network Manager permitted that.
View 6 Replies
View Related
Feb 28, 2010
Are there detailed instructions for Suse 11.2, anywhere, on installing a hardware dial-up modem and configuring it to get an Internet connection?
View 2 Replies
View Related
Apr 13, 2011
I am relatively new to linux and am running into a problem. I just got a new laptop and need to configure/install it's wireless driver but am getting an error when running "make". The error is: make[1]: Entering directory `/lib/modules/2.6.37.1-1.2-desktop/build' make[1]: *** No rule to make target `modules'. Stop.
I have scoured these forums and know that others have the same issue (when configuring other drivers/programs). I am sorry if this post is redundant. It sounds like the Makefile is pointing to the wrong directory. I am using opensuse 11.4, have make and gcc installed. My kernel is linux-2.6.37.1-1.2 (I just re-installed the desktop kernel to make sure it was up to date). The driver I am trying to install is located here: AUR (en) - rtl8192ce.
Another forum suggests pointing somewhere in the /usr/src/linux-2.6.37.1-1.2 directory instead. Is this correct? Should I be pointing to a folder within this? I am not a programmer but any description about what I am actually putting in this directory and why would be awesome (so I can learn a bit more). Or just helping me solve the problem would be great too.
View 9 Replies
View Related
Jul 14, 2011
I have installed openSUSE 11.4, and I really like it compared to other linux versions I've tried, but I find it requires a bit more linux know-how.
Being fairly new to linux, it has been quite the effort to learn but I started getting the hang of things via online support and such. Lately I've been having some problems.
I need linux to run a TCAD program, and it requires some openGL functionality and was giving me errors when I tried entering the software related modeling GUI.
Anyhow, I thought it had to do with my graphics drivers, so I decided to update them via ATI proprietary driver. After doing this, the system booted me into the console rather than X.
I tried numerous online guides on how to fix the issues, by running all sorts of boot commands (nomodset), and I read the graphics driver theory, as well as trouble shooting ATI graphics.
In the process, I also installed a radeonhd-xorg11-something through YAST, and that caused a black screen altogether upon boot. I managed to boot into failsafe with x, and from there I removed it via YAST, however this did not resolve issues. I also deleted any xorg.cionf files in hopes that the system will default back to the radeon driver.
As it stands right now, I can only boot into my system via failsafe mode. I'm keeping the unit off for now as it's probably tired from all the hard reboots I had to do . If someone can help me resolve this issue, I can turn it on and enter any commands required, such as finding out the graphics card, the kernel, the driver currently running, etc and I can post it here.
View 9 Replies
View Related
Jul 24, 2011
I installed openSUSE alongside Windows yesterday using the default settings. I had the installer automatically shrink my windows partition and create one for openSUSE. When I boot my computer now, the openSUSE bootloader shows up with options to boot into openSUSE, failsafe openSUSE, windows1, windows2, or windows3. Windows1 and windows2 appear to be the same thing - they both boot into windows, they read the same info for the hard drive, they have access to all the same files. Windows3 cannot start and says that the BOOTMNGR is missing. What are these three different windows options, why are two the same, and why doesn't one work?
View 3 Replies
View Related
Mar 16, 2010
I am interested in installing openSUSE on my computer and my PC already has a Debian installation on it.What is the easiest/best way of installing openSUSE without losing any data?
View 4 Replies
View Related
Apr 21, 2010
I have to install another language to an openSUSE 10.3.The problem is that after selecting the language the system is requesting the CD but I don't have one. Can I force the system to update from the Internet repositories or something like that?
View 3 Replies
View Related
Apr 2, 2011
Q: How can I allow my users to mount a cifs share without an entry in fstab in OpenSuse 11.4?
I have an answer myself. Until OpenSuse 11.2 I could mount my samba shares by making mount.cifs and umount.cifs setuid root. Today I installed OpenSuse 11.4. Unfortunately mount.cifs isn't anymore allowed to be setuid due to security concerns. Security is not an issue in my case, so I copied the mount.cifs and umount.cifs from 11.2 to make it work again:
1. Download cifs-mount-3.4.2-1.1.3.1.x86_64.rpm from this repository (I use 64 bit):
"http://download.opensuse.org/distribution/11.2/repo/oss/suse/x86_64/"
2. Extract the files mount.cifs and umount.cifs from the rpm and copy them to /sbin
3. Make them setuid root:
Code:
linux-y5qw:~ # chmod u+s /sbin/mount.cifs
linux-y5qw:~ # chmod u+s /sbin/umount.cifs
4. Mount your cifs shares as a normal user:
Code:
martin@linux-y5qw:~> /sbin/mount.cifs //192.168.2.2/data /home/martin/data/ -ousername=martin
Password:
View 1 Replies
View Related
Jan 20, 2010
I setup a debian home server some time ago and have successfully setup samba so my windows machines can access them and upload/download data off it.I have setup opensuse on this desktop and after allowing smb through the firewall I now seem to have read only access to the smb shares.I am using the same username and password as I do on my windows machine, so in theory smb server should see my username and password and allow me read/write, like it does in win7. Is this correct?
Having just thought about it I think samba is just a tool to get shares working between linux/windows and macos.Is samba even the best tool for linux - linux sharing? how do I get read/write access to my shares in opensuse?or do I use another program to see my shares?I'm a bit new to this linux- linux sharing so I apologies.
View 1 Replies
View Related
Dec 15, 2010
The putty connection is ok, FTP also. Apache is on. Could be something at the firewall?I am trying with the IP and a directory at lampp/htdocs.
View 3 Replies
View Related
May 10, 2011
Trying to install the Novell iprint client but got the following error message:
My system specifications are as follows:
View 6 Replies
View Related
Sep 10, 2010
Does anyone know how to revert network speeds to those attained with openSUSE11.2-64? On openSUSE11.2-64 the reported network download speed was,
max : 420 kB/s
ave : ~ 200 kB/s
After upgrade to openSUSE 11.3-64 the figures dropped to about 25% of the previous values. After upgrade to KDE 4.5 and plasmoid-networkmanagement the initial values did not change but the average value dropped after about 30 seconds to ~ 15 kB/s. Approach so far:
1. The motherboard's (A780GM-LE) build in LAN (Realtek RLT8111DL) was originally detected by openSUSE 11.3 as the Realtek RLT8169 and kernel module r8169 installed. This was replaced by the latest module r8168-8.019.00 from Realtek.
2. After kernel update to Linux 2.6.34.4-0.1-desktop x86_64 the plasmoid-networkmanagement was replace by NetworkManager-kde4. This improved flow with,
max : 140 kB/s
ave : ~ 80 kB/s
View 9 Replies
View Related
Mar 31, 2009
Most of the issues involve disconnect after a login and mouse settings. It does work fine for me, but after a few days of being up and using vnc on and off it will still connect, but show the black/white mesh screen with the big black X cursor, then if I wait 30 seconds it disconnects.
Heres the log when this problem starts happening
If I restart the computer it works again, however this message is still shown in the logs:
So I guess the above message is trivial to the problem? The thing is, I am not using KDE4, I installed 3.5, and in sysconfig my display manager is set to KDM not KDM4.
I'm using VNC through remote administration, multiple users will be accessing this from the network and need to get to the login screen.
View 9 Replies
View Related
Sep 23, 2010
I have to wonder how much testing Opensuse has done with yast-dns-server package. After adding zones to the dns server - the system loses the ability to perform name resolutions. I can copy a named.conf file from a system that does work, except everytime the system is restart the named.conf file is rewritten trashing the updates done and again rendering the system to perform name resolutions.
Anyone have suggestions on how to get yast-dns-server from interferring with the configuration file? I tried just uninstalling the package, but then bind doesn't even start up on boot up.
View 3 Replies
View Related
May 19, 2011
First off How do you disable IPV6 access on all connections used on the pc-is there a way to test for ipv6 connectivity?
Secondly how secure is a default opensuse 11.04 machine out of the box? should i be making some changes to the default configuration?
Thirdly what does the default firewall settings do? on my network i use my wpa2 psk aes connection via my local wireless network-in the event that some can hack into my wireless would the opensuse firewall prevent direct access to my pc from a attacker on the same wireless subnet?
Fourthly when does opensuse 11.04 go out of date? in a year from now?
View 9 Replies
View Related
Aug 28, 2011
I have a fresh install of openSUSE 11.4 with KDE. This includes ALSA and Pulseaudio.
I have a mic and speakers and a webcam. As far as I can see microphone and sound reproduction work, the webcam also works:
- I can arecord and aplay
- KMix works
- amixer and alsamixer work (I am using microphone boost)
- test sounds play
- the webcam works in "Personal Settings (Configure Desktop)": Hardware > Multimedia > Phonon (test camera)
- Pidgin and Empathy work with sound and video.
(had to set this: gconftool-2 --set --type=string /system/gstreamer/0.10/default/audiosrc pulsesrc,
without this setting it was set to alsasrc by default and Pidgin and Empathy didn't work).
I installed Skype 2.2 (also tried 2.1) and tested the video camera in Skype. Result: doesn't work.
I made a test call: I hear the voice of the lady answering the call, but my own voice is not recorded.
In Skype everything is set to use Pulseaudio.
I am at a total loss to understand what is going wrong here. Why does Skype not work, when everything else does??
I made this observation:
When an application records something, a "Capture stream" shows up in the KMix "Capture Streams" tab. For example, when I use arecord, "ALSA capture" shows up, while I record. When I make a call on Empathy, a capture stream shows up in the said tab.
When I make a Skype call, NO capture stream shows up, so obviously Skype is not capturing anything.
View 9 Replies
View Related
Apr 27, 2011
after downloading th 4.3 Gb .iso openSUSE 11.4 i found that i cant install it beside my window ,i have trouble with greating a suitable partition for openSUSE .my problem is that i have three primary partitions and also three partitions ,and softwares don't allow me to create a ext4 and a swap partition.
View 8 Replies
View Related
Jan 12, 2010
I have three machines with the same configuration. ssh and SFTP enabled on all three and I can see all three from the network. I can also ping all three. Here is what I get with the ssh debug command on the problematic machine:
linux-csp7:/home/ines # ssh -vvv ines@192.168.2.19
OpenSSH_5.2p1, OpenSSL 0.9.8k 25 Mar 2009
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
[Code].....
View 4 Replies
View Related
