The putty connection is ok, FTP also. Apache is on. Could be something at the firewall?I am trying with the IP and a directory at lampp/htdocs.
View 3 RepliesI am using an Acer Aspire 5536 AMD dual core laptop with a 64bit installation of Susie 11.4. Using 11.2 I had no problems connecting to the wireless router. As soon as 11.4 was installed, clean install, and the laptop rebooted, network manager failed to start, until manually invoked and then enabling networking through the system tray. Even after this it will not connect to a wired or wireless network sometimes for more than 30 minutes.
View 9 Replies View RelatedI want to connect my OpenSuse 11.3 Distribution with the Internet via WLAN. But i can't open the KNetworkManager. It doesnt respond to my clicks. If I click on the KNetworkManager "Button" it doesen't react.
Result : I can't modify my WLAN-Connection.
Trying to install the Novell iprint client but got the following error message:
My system specifications are as follows:
OpenOffice can not follow URLs and complains that it can not find the default browser. Konqueror is set as the default browser in the 'systemsettings' and no other application (so far) has complained about this.
View 1 Replies View RelatedI have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies View RelatedI recently ran into a problem with my at&t vpn connection. I'm hoping someone in this forums may be able to help? It's been working beautifully then one day it just wouldn't connect. I'm wondering if AT&T may have something to do with this...? I have tried reinstalling agnclient-1.0-2.0.1.3000.i386.rpm and agnSUSE10Prep-1.0-2.i386.rpm but nothing seem to work.I'm running Linux 2.6.31.12-0.1-desktop i686System: openSUSE 11.2 (i586)KDE: 4.3.5 (KDE 4.3.5) "release 0"
View 2 Replies View Relatedwhere I can find a Nevernote (Evernote client for Linux) for an X64 system (Lenovo Thinkpad T61) ?
View 6 Replies View RelatedI have just installed opensuse and the codecs to replace windows on my laptop. This is my third day using open suse and some of the websites i try to open (amazon.co.uk, gmail.com and others) redirect to a chinese website called www.net.cn) This is the same with the firefox and opera browsers.
View 6 Replies View RelatedI'm trying to set up an openSUSE 11.2 host as NIS client and I would like to knowwhether or not it can be client of two (or more) NIS domains. The reason is thatsome users are authenticated on server1 (nis-domain1) and some others on server2(nis-domain2).Trawling the web, I found a HP document stating that a client can belong to one NIS domain only. However, the yast NIS client interface allows adding NIS domains/servers to the seemingly default one. I'm totally confused.I made the following experiment:1. declaring nis-domain1 in /etc/defaultdomain and server1 in /etc/yp.conf: ypwhich returns server1, ypcat passwd lists the users on server1.2. in the yast interface, I added nis-domain2 and server2; in /etc/yp.conf, there is an extra line "domain nis-domain2 server server2". After reboot, ypwhichreturns server2, ypcat passwd lists the users on server2. But now the maps from server1 are no longer available.
View 4 Replies View RelatedI have an obstacle to login remotely to my server. When I used DHCP internet connection, I simply worked with the ssh (scp) commands without any problem. Now, however, I need to use the VPN client to access to internet. After I log on by VPN, I can use the Firefox browser, but the ssh (scp) commands do not work at all from the command prompt. It looks that ssh does not go through the VPN client. I have tried putty.exe with wine, but that also does not work.
View 1 Replies View Relatedi am currently using monkey webserver on my linux machine for my website. I just recently found out that you can also stream music if you direct the web address to a folder inside the directory. The problem is when i try to click on a .avi all it wants to do is download the video instead of playing it in the browser or playing it in windows media player. What can I do to make an .avi to stream from my linux machine ( note this is for private use only so i can stream movies on my lunch break or when I am at a friends house this is not to share my stuff to the general public)
View 1 Replies View RelatedI have openSuSE 11.3 + KDE 4.4 running on a Thinkpad t400. Knetwork manager recognizes my wireless networks and the icon shows that my computer is connected. However, I am not able to connect to the web - browser, chat, twitter app - nothing works.
View 9 Replies View RelatedWhen I tried to log in this morning I couldn't until I enabled Java scripts in my Opera browser. This must be something "new and improved". Could someone confirm this? I would prefer "old and lousy" rather than open up my computer to the world at large.
View 1 Replies View RelatedOriginally after an installation of openSUSE 11.4, I had no internet connection at all, even when connecting with ethernet cable. But then I tried switching back to YaST and then back to Network Manager, and restarted a couple times, and now I have internet connection. DNS is also working, for Ping. The problem is that firefox does not use DNS and cannot resolve host names. I can use Firefox with IP numbers.
View 3 Replies View RelatedI'm looking for information on how to use a single FTP command from the terminal window, that would do this:
- Login (with usesrname/password)
- Set Transfer type to Binary
- Get all files in a directory and download somewhere.
- Delete all files in the directory that was just downloaded.
- Close Connection when complete.
There lots of information on individual commands, but I want to combine them into one single command that requires no human interaction. Just one big line Hopefully from this one command line I'll be able to create more for other purposes (like login and delete one file then close).
We would like to use Kiwi LTSP to boot some old PCs straight in to a Windows terminal session. We have this working with RDesktop, but we would like to load balance the connections to our Citrix servers, which I don't believe you can do with RDesktop as it points to a single Windows server.
Is there a way to get LTSP to connect to published ICA applications on boot in a similar way to specifying screen07=rdesktop in lts.conf?
until 2 weeks ago I had o.S11.3 on both my Siemens and Asus laptops. I have installed NX No Machine. ( I know it's not open source,I am using the free version). With commandline ( root) /usr/NX/bin/nxclient I was able to connect to the other machines. I got Qt: Locales not supported on X server, the NX menu popped up and I was able to connect by inserting resp codes. After fresh install of o.S.11.4 on the ASUS the commandline (root) answers:
xlib: connection to":0.0" refused by server
xlib: No protocol specified
nxclient: cannot connect to X server:0.0
The ASUS can still be reached from the other machines (one with o.S.11.3,the third one with o.S.11.2 ) SSH ( Lan)connections are all working forth and back between the machines, even to and from Win XP, however only from Win 7 on the ASUS, but that's a Win7problem. Comparing the installed xorg-x11- server-extra : on o.S. 11.3 Additional X servers ( Xmdx,Xephir,Xnest,Xvfb ) ,on o.S.11.4 the Xvfb is missing, might that be the reason?
I absoultely cannot figure this out... No matter which browser (FireFox, FireFox4, Seamonkey, etc) I try to use, I always get this error message:
Replace "seamonkey" with whichever browser stated previously.
So a while back I was able to mount a directory from my OpenSuse server as a NFS on an Esxi server. After restarting the Esxi server, the NFS became inactive and I was unable to remount it. The error given was that the Esxi client was unable to connect to the Suse server. I was looking into the showmount -a command on the Suse server and it showed the mount point on the Esxi server. Could this be causing the Suse server to reject new attempts to mount the directory? What else can I try to fix this problem? Also I should note that both servers can ping each other.
View 2 Replies View RelatedI am installed Opensuse 11.2 and maked all configurations and installations for Mail Server Yast. ( Postfix, Ldap ) In ldapadmin what class objects i need insert to configure e-mail client ? I am choised for test suseMailAccess and in suseMailClient inserted my e-mail and what i insert in suseMailAction ? Anyhere know howto install and configure this service ?
View 5 Replies View RelatedI'd like to have my Samba client update Windows DNS then join in domain. Computer join in domain but DNS not update.
OS: OpenSUSE 11.3
Try after join in domain:
net ads dns register -d 3
[2010/08/18 20:47:17, 3] param/loadparm.c:9158(lp_load_ex)
lp_load_ex: refreshing parameters
[2010/08/18 20:47:17, 3] param/loadparm.c:4929(init_globals)
Initialising global parameters
[2010/08/18 20:47:17, 2] param/loadparm.c:4788(max_open_files)
rlimit_max: rlimit_max (1024) below minimum Windows limit (16384)
[2010/08/18 20:47:17.871064, 3] ../lib/util/params.c:550(pm_process)
params.cm_process() - Processing configuration file "/etc/samba/smb.conf"
[2010/08/18 20:47:17.874091, 3] param/loadparm.c:7842(do_section)
Processing section "[global]" .....
Windows Workstation update DNS this domain. DNS mydomain.ru resolved.
I recently donwloaded boinc and every time I launch I get this error "cannot connect to core client." I went through the guides and opened port 31416 in external zone, am I doing this right? The guide said to put it in the DMZ, what's the difference?
View 3 Replies View RelatedBackground:I have a small PC104 running opensuse 11.1. I'm writing a small client/server application for debugging purposes using mono and WCF. All the client does is make a request for information every 100ms.Problem:After about 20 requests the server quits responding to the client. Even if the client is running on the same machine. I've run the exact code on another laptop running opensuse as well as a laptop running windows and everything works great. Hopefully that closes the option that it is a code, mono, or opensuse flaw.Is there a kernel option or a network option that anyone knows about that might cause this sort of behavior?
View 3 Replies View RelatedAfter connecting to any host, the openssh client hangs after I type the password. The strange part is, it only hangs if when I use the wlan card. If I connect my phone to the computer and uses it to connect to my server, it works 100%.
If I use any other computer at the wireless network, it works 100%
If I use putty on the same machine, it works 100%
It is only a problem when I use the build-in wireless card, under openSuSE 11.3, on my Lenovo L512. (note that everything besides ssh works completely).
I setup an ssh server that works fine when using the terminal, but trying to run programs like firefox fails. It will open partially and then simply hang. Less complicated programs can open successfully and run fine, but cause my remote computer to pause every 5 seconds for about a second.
View 9 Replies View RelatedI just performed a fresh installation of openSUSE 11.3 and ISPConfig 3 on my server. I read through the article "The Perfect Server - openSUSE 11.3 x86_64 [ISPConfig 3]" and followed the instructions closely. Everything went smoothly.
I went into ISPConfig 3 and set up a DNS zone, email mailbox, FTP client, and website all for a client I created, hoping to use the client as the main account for a web site I want to host on my server. After I finished with this, I logged onto the server through FileZilla using my newly created client's information. It took me to the "main directory" with the folders cgi-bin, log, ssl, tmp, and web. When I open "web" I see an html file named "index.html."
I tried loading a mock website into the folder, also with an index.html file, and the files transferred over properly except the mock index.html file. The program changed the name to index.html.1. I tried to delete the original index.html file but was not allowed to. I then tried to rename it to something other than index.html and kept receiving a 550 Rename/move failure message. Can anyone point me in the right direction or help me resolve this issue?
I'm thinking perhaps I don't have the right permissions with the client to rename files, but since that's the account I want as the "owner" of this web site, I need to change the permissions so I can. I tried changing the ISPConfig 3 "Limits" for the account to SSH-Chroot Options "NONE" thinking that might be the issue.
This issue has appeared at least twice in the past few years, for Ver. 10 and 11, but I've not seen any answer other than a suggestion to file a bug report.
The NFS client, on 11.4, returns an unspecified error when started from System Runlevel:
YaST got signal 11 at YCP file Service.ycp:77
/sbin/yast2: line 423: 19958 Segmentation fault $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS
Is this client not compatible with the wide screen format on my notebook?
overnight break Left both machines running at the end of the day. This morning, Runlevel can stop and restart NFS client with no problem. The remote directory shows up in the client's Dolphin and is the correct size and content. In the medical field they call this spontaneous remission. Hope it works for you too.
On Linux Mint (Gnome) i used to go to Network drive. that is on the right hand side of Nautilus there is a short cut for Network. in there i could see my network hard drive and other laptops connected to the network, and i could access my files. but on OpenSuse, when i open the network folder, nothing comes up. may be it needs some sort of configuration.
View 2 Replies View RelatedI have a 11.1 NFS server and several 11.1 NFS clients. If for some reason the server shuts down before the clients then the clients become almost frozen, particularly KDE is rendered useless even after cycling back to init 3 then init 5. I would like to make the clients immune to shutdowns on the server.
View 3 Replies View Related