Until today Plesk 9.3.0 works finely on my ubuntu 8.04 dedicated server. Then i tried to install proFTPd and after that Plesk chashs.
Now i want to reinstall my plest but i have a problem i get lots of error messanges like that
Quote:
How can I remove completly plesk and install it again?
Clients are not able to access FTP thru browser: ftp://IP.When you open it thru browser, it does not ask for a usename or password but shows a PUB diretory instead. I tried to telnet port 21 and shows that it is using VSFTP instead of Plesk's ProFtp.
View 1 Replies View RelatedThe thing is I need a bigger server, but at the same time I'm having problems with cpanel and centos and I'm quite bored. So now I want to migrate from my cpanel server to the plesk server keeping the domain and it's content. I tried to create a ticket in plesk support but either I didn't bought the server yet. So, what's the quickier and safest way to migrate? Is there any script?
View 1 Replies View Relateddifference between cpanel and pleak? for which service they are being used?
View 2 Replies View RelatedI am trying to determine which version of Ubuntu we have installed on our Webfusion VPS in order to see how to update to specific php and mysql versions needed for installing some software.
uname -a gives this:
Linux [hostname] 2.6.18-028stab070.2 #1 SMP Tue Jul 6 14:34:09 MSD 2010 x86_64 GNU/Linux
I don't see anything that matches up to any of the Ubuntu releases. Is there any other way to determine what we have?
We have Plesk 9.5.2 on the machine.
Certain software we need to install requires PHP 5.2.10+ and Mysql 5.2+ but we currently have PHP 5.2.4-2ubuntu5.12 with Suhosin-Patch 0.9.6.2 and Ver 14.12 Distrib 5.0.51a
how to get the required versions of php and mysql (without breaking Plesk)? I tried editing /etc/apt/sources.list to add a new repository and using apt-get upgrade php but I probably did not add the correct repository.
I'm installing OpenLDAP on a VSP server, CentOS 5 with Plesk at 1and1. I've tested the slapd.conf file with slaptest and it returns ok. I've tried to start ldap with /sbin/service ldap start and it says it is ok and starts. But if I try to run ldapadd I get an error message saying that it could not contact the ldap server. I check the status with /sbin/service ldap status and it show that it is not running. I can do /sbin/service ldap start, it will say it started and turn around and check the status and it will show that it is not running. Would something in Plesk be killing ldap as soon as it starts? I installed OpenLDAP via yum and have been following directions found in a couple of ldap guides.
View 5 Replies View RelatedCan a Fedora server be remotely managed with Plesk and/or Cpanel or only via SSH?
View 1 Replies View Relatedi have a quick question about using plesk on centos 5.x server and installation of ssl certificates. if anyone out there has expertise with above,
View 1 Replies View RelatedI am managing a Fedora dedicated server with Plesk 9 and just recently moved the email for one of the domains on the server to Google Apps for business. Unfortunately, I cannot get email messages from the website forms to deliver to addresses on this domain. For anyone familiar with Plesk, I have disabled mail in the hosting settings by un-checking the "Activate mail service on domain" checkbox and there are no accounts in the domain. (Other readings have indicated that this should be enough to allow mail to be directed to the appropriate server). My MX records correctly point to the google apps mail server.
I'm quite comfortable with command line, but I know almost nothing about the sendmail program or its alternatives and my attempts at researching how to set up this relay has been futile. I'm pretty sure I'm using sendmail and not qmail or anything else from what the red-hat style "alternatives" symlinks point to. I've also checked the /etc/mail/access, domaintable, mailertable, sendmail.cf, virtusertable, local-host-names, sendmail.cf, and submit.cf and most of these files are empty (except the .cf files), and the sendmail.cf and submit.cf make no reference to the domain in question.
Here is the output from a sendmail test that was was not received. (Private data omitted of course).
sendmail -v xxx@yyy.com
test email from yyy.com webserver. please ignore.
xxx@yyy.com... Connecting to [127.0.0.1] via relay...
220 my.server.com ESMTP
>>> EHLO my.server.com
250-my.server.com .....
Closing connection to [127.0.0.1]
>>> QUIT
Performing the same test and sending an email to a non-hosted domain works fine.
after getting the ACL extension and then unpacking I try to phpize, but server comes up with the following error message:wget http://pecl.php.net/get/APC-3.0.19.tgz
tar xvfz APC-3.0.19.tgz
[Code]...
Alternatively I tried pecl install, but with same result. Whats wrong? I have looked in /usr/bin/sed and there is (of course) no file or directory named "sed". What is "sed" and how to recover? Would be nice, if you could give me an indication what to look for.
I want to set up a ftp site for a few buddies to grab some files from me but I have no clue how to install this gadmin-proftpd-0.4.0. It shows a gui so how do I get that I am currently running ubuntu 10.04 w 3gb ram w a amd 9850 2.5ghz cpu on my server.
View 7 Replies View RelatedI am unable to install proftpd-basic:
The following NEW packages will be installed:
proftpd-basic{a}
The following partially installed packages will be configured:
proftpd proftpd-mod-ldap proftpd-mod-mysql proftpd-mod-pgsql
0 packages upgraded, 1 newly installed, 0 to remove and 13 not upgraded.
[Code].....
I am attempting to setup an ftp server as a first project to get me going in the world of Linux however when I run the command apt-get install proftpd-basic ....
View 14 Replies View RelatedI have installed ProFTPD in Ubuntu 10.04 in a Cloud Server (console only) but I am not being able to set users and access via FileZilla.
View 2 Replies View RelatedI'm running Ubuntu 9.10, and am trying to get proftpd to listen on a port other than 22. I've modified the proftpd.conf file, as well as adding the desired port to my /etc/services file, yet if I try anything other than port 22, the connection is refused.
View 3 Replies View RelatedI have set up proftpd many times now one Ubuntu 9.10 and never ran into any problems. I decided to go ahead and do a clean install of the new 10.04 and set everything back up (ie ssh ftp apache... ect)I got done with ssh with no problems and started working on getting proftpd up and running just like I've always have. But now every time I try to login it gets to where it should list all the files in my dir and it just times out. If I connect through my network (192.168.1.101) everything works fine so I dont think its my .conf file.ll ports are open that are needed and I even tried opening up the passive ports to see if that would help but it does not.
View 1 Replies View RelatedWhenever I try to click Activate it just sits there for a moment and stays deactivated..
View 2 Replies View RelatedIm trying to change permissions so i can upload to my proftp server. i can download ok but i want to access most folders via ftp so i can upload to them, at the moment i get permission denied message.
View 1 Replies View Relatedi am using proftpd-mod-sql on ubuntu 10.04lts and i am trying to give the ftp users access to my external usb hdd's because the internal drive is too small.
I am using vusers in a sql db. They are associated to the ftpuser and ftpgroup. My drives are mounted to /media/... and belong to my user and group. The rights are set to 0700. So my ftp users have no access to it and i cannot change it. I could change the vusers uid/guid to my username but i think, that is not a good solution.
I would like to have access to the usb drives with the ftp users and with my ordinary username (for xbmc and samba access).
I'm running Ubuntu 10.4 Lucid Lynx and I am setting up gadmin-Proftpd and when I try and activate it. I get the following message and am really unsure where to go from here:
- notice: unable to bind to Unix domain socket at '/var/run/proftpd/test.sock': No such file or directory
- notice: unable to listen to local socket: Operation not permitted
- Fatal: TLSRSACertificateFile: '/etc/gadmin-proftpd/certs/cert.pem' does not exist on line 56 of '/etc/proftpd/proftpd.conf'
I couldn't get GADMIN-PROFTPD to activate so I activated it using sudo /etc/init.d/proftpd start Now when I have proftpd started from the terminal command line and go to [URL] in firefox I get a white browser window but no directory listings without any promtp for a username or password (192.168.1.100 being my internal LAN server IP address) Can you tell me what I am doing wrong with the below config?
[Code]......
I'm having problems with the ftp-server ProFTPd,If I transfer files from a Linux host to a Windows client, it says that my transfered files are damaged, so I'm unable to open them..I've searched this forum and several people say I have to set the default transfer mode to 'binary' mode.I did that, but it didn't work at all for me... so despite the binary transfer mode my files are still damaged when I transfer them.when I do it through SSH, it works fine, so the problem is the FTP-server...
View 3 Replies View Relatedi have been havin a little trouble with my ftp server im using proftpd and have been able to connect to the box on local lan but it stops with an error about tls packet.
i have been following a guide on settin up my server [URL]...and have attached my config and error details
Proftpd is installed and running fine on 8.04 server. I want to streamline the process of adding users. Adding a ftp user with USERADD fails (user is created but connection fails when trying to connect with ftp client).
Code:
useradd -d /ftp/ftphome/myuser -g ftp -m -p mypassword -s /usr/sbin/nologin myuser
But, ADDUSER works:
Code:
adduser myuser
usermod -d /ftp/ftphome/myuser -g ftp -m -p mypassword -s /usr/sbin/nologin myuser
It's a bother because I want to automate the process, and ADDUSER has all those prompts and asks for the password twice.
I already have my laptop as a server using a LAMP server + proftpd and the FTP->MySQL link up. I built myself a new Headless and set up the SSH and VNC on it and all that good jazz. LAMP works and everything. Proftpd+MySQL (using the proftpd-mod-mysql package from repo) doesn't seem to work on this headless box. So I used the tutorial from [URL]... Thinking "I'm using 10.04 - it's close enough". Both came up with the same error. 421 Service not available when I ftp from the localhost. Is their something I'm missing? the Laptop set up (also 10.04) works groovy fine. Also all the log files are blank.
View 2 Replies View RelatedI use Ubuntu 10.10 and setup Proftpd apps which I would like to use to access to my files from outside of my SOHO LAN network. This is work on LAN very well but from outside I get some error msg. However I establish connection with my Ubuntu FTP Server machine but I can't get list of files and folders on server.
I get this error msg:
227 Entering Passive Mode 89,216,116,8 243,96 --> i know what this no means: my Stat IP and the port
500 Illegal Port Command
Get Directory
FTP Port Command failed
Some Additional Information:
On the edge of SOHO LAN i use Cisco router for access to the Internet.
NAT is configured, PAT (NAT overload) is configured also.
I forward ports which I needed for FTP: 21 and 20, and passive ports 60000 - 60001.
When I use Windows OS and BUlletProof FTP server (port 21 or some custom port i.e. 65021) I only forward that port (21 or custom port i.e. 65021) and everything works great.
I am pretty new to Linux and I want to start a ftp server with proftpd. Well sofar I have made one but there is one problem when I login with windows, the computer don't ask for a username and password. Instead he just show some folders from my home directory.
I have used the standard proftpd config file, and tried to change some things with online tutorials but non of them worked with windows (only for linux ftp connections). Can some of you refer me to a good tutorial for a multi user ftp linux server or explane me what to do?
How can I configure proFTPd to deny all unless:User is part of group: ftpguysClient IP matches either: 1.1.1.1 or 2.2.2.2 or 3.3.3.3I already have the config file (proftpd.conf) setup to only allow users who are part of the group ftpguys. To do that I use this:
Code:
<Limit LOGIN>
AllowGroup ftpguys
[code]...
which is the best vsftpd or Proftpd or Pureftpd ?
which is high secure and reliable ?
Pureftpd or Proftpd can install on Centos ?
I followed this tutorial trying to set up proftpd. I'm using Slackware 13.1, but I had assumed most of the tutorial was all relevant still.Using the default proftpd.conf file, I was able to do anonymous login, but I was hoping to use the conf file in the tutorial to only allow certain users, so it currently looks like this:Quote:
# To really apply changes reload proftpd after modifications.
AllowOverwrite on
AuthAliasOnly off
[code]....