OpenSUSE Network :: Installed 11.3 32-bit And Cannot Access The Web?
Dec 12, 2010
I am reasonably literate, but grew up with DOS and Windows. I tried ubuntu before and found it ok but never persevered.
I have just installed 11.3 32-bit and I cannot access the web. I first tried using a usb wireless (Belkin F5D7050 - Ver. 3) it seems to be recognised and functioning but no web access. I can ping that's all. Can't access internet repositories either.
I then tried a wired connection. Again it seems to be recognised and I can ping successfully but no web access or repositories.
View 9 Replies
ADVERTISEMENT
Aug 26, 2010
I installed 11.3amd64 as a VM under Vista/VMWare Player - all worked fine. I have now installed it as a physical system. It nstalled cleanly BUT during first boot it could not access the repos. With each repo it gave the message
- download (curl) error for (repo)
- error code connection failed
- error message could not resolve host (repo)
This was followed by a message box containing
- UI syntax error
- no widget with ID 'contents
Firefox could not access the internet (cannot find server) until I disabled IPV6 (I used about:config), now it works fine. I think the repos problem is because of IPV6 - I usually have trouble with IPV6. I tried disabling IPV6 with the following (How To Disable ipv6 on SuSE Linux | Linux Poison)
[code]......
View 8 Replies
View Related
Mar 25, 2010
Installed a security update for samba tonight via Opensuse updater.Now, when trying to access my home network an authentication box pops up (never used to)Asks me to enter authentication for my home network.I enter my username and password and hit enter. After a few seconds the authentication box pops up again askingfor the same indicating I have entered the wrong username / password combination (which I know I have not).
View 9 Replies
View Related
Feb 9, 2010
I have a desktop computer running OpenSUSE 11.2 with two network cards installed. I would like to use both cards for connecting to the internet using different networks. The setting would be the following: eth0 is the main (default) card, almost all programs should use this NIC for connecting to the internet. eth1 is used only by a few programs, which have setting for selecting which network interface to use. The two NIC's are connected to different networks, so the IP address of the NIC's, the related subnet masks and gateways are also different.
Saying short, I would like to have the two NIC's as they would be in two separate computers. I can set the IP address and subnet mask of the NIC's. The main problem is that I can only declare one gateway. How can i setup this? I do not use network manager, I configure network cards using yast, but if needed I can of course use ifconfig directly.
View 9 Replies
View Related
Jul 30, 2010
I'm having a strange problem with my network connection/DNS. I turn computer the on and it recognizes and connects to wireless or wired but I can't access any Internet resources or my router. If I ping the default gateway, I get no response and I get DNS errors from any network services that run at start up. If I stop and start the network daemon then it all works fine until the next time I turn on my laptop. It does this for both wireless and wired connection.
I've tried to edit the network interface information in YaST but it says that configuration is handled by knetworkmanager and I have no idea where that information is accessed. I should point out that it all worked fine until I tried to connect to open WAP at my school and couldn't so I connected to the wired network. Next morning I had this problem when connecting to my home network. My questions are 1. What could be the cause of this error and 2. where does one configure the network interfaces when using knetworkmanager
View 4 Replies
View Related
Feb 22, 2011
i have 3 comps(running suse 11.3) and a laptop(running vista sp2). i have installed samba on all suse comps. i have a printer attached to one of the comps and it has been shared also the internet connection on that comp has been shared. all the computers are connected using lan cables through an ethernet switch. i also have a wireless router which is connected to the ethernet switch.
I am able to view all the comps on the network except the laptop running vista. all the desktops are visible on the network and are able to print and share files on the network and also connect to the internet. the laptop running vista can connect to the internet but its not visible on the network and nor can it share files across the network or access the printer.
View 1 Replies
View Related
Aug 20, 2010
New SUSE 11.3 install connects to network/internet etc OK with DHCP-assigned IP address. When I switch to static IP, I can no longer ping internal network, or anything else. This works OK with SUSE 11.2 on same hardware and (as far as I can see) same setup. Some diagnostics are shown below.
Firewall
Disabling the firewall makes no difference.
Not using a network manager (can't see how to assign fixed address if I do - all greyed out).
ifup eth0:
eth0 device: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
(not sure why the warning - eth0 is assigned to external in the firewall setup).
[code]....
View 9 Replies
View Related
Sep 17, 2010
I have installed SUSE yesterday.Everything has been fine except two.1. I can't access my hard disk drives. It says it need to install online some software for it but it can't.I am attaching a screen shot of the error I encounter.2. I have Ubuntu installed in another disk drive but in the Grub menu there in no option to boot to Ubuntu OS.How should I change the text in 'menu.lst' to solve the problem?
View 6 Replies
View Related
Apr 20, 2011
I can't access any of the wired network settings and theres a red square with an X through it. Here are some snap shots. This is really funky.Is this red box with the X suppose to be here?
View 3 Replies
View Related
Jun 7, 2010
i just installed opensuse 11.2 and there is no internet and i have no idea how to get it.im using a comtrend dsl modem and i figured it would just auto detect but i did not.
View 1 Replies
View Related
Apr 28, 2010
I haven't been able to get a working X11 environment on a Dell PowerEdge 1850. Using YaST without an X11 environment sucks particularly when you are trying to configure Apache. In addition, the Apache configuration files seem to have changed significantly since the last time I configured Apache on a SuSE Linux distribution. Where can I find good documentation on editing suseconfig files to ensure that I get the modules installed that I need for the collaboration tool that I'm installing?
View 2 Replies
View Related
Oct 6, 2010
I have just installed OPENSUSE 11.3 (32 bit) on a pc. I am brand new to OPENSUSE. I have connected a network cable from a router that previously connected a Windows XP machine to a home wired network/internet connection. The computer shows network connectivity, but when I launch Firefox it cannot find the OPENSUSE URL or any other such as my ISP. Do I need to install or activate some LINUX application to make the OPENSUSE system see the network /internet connection? I can't seem to find any application in the basic OPENSUSE installation that addresses this. Is there some kind of firewall that needs to be dealt with?
View 3 Replies
View Related
Jun 12, 2010
I halted my PC with the command ssh PC "su - -c halt", I use ssh key to access the PC so it ask for the root password, but echo it on the shell
[vampird@Sharwyn]:~$ ssh shinobu "su - -c halt"
Password: ROOTPASSWD
[vampird@Sharwyn]:~$
- --
VampirD
[Code].....
View 3 Replies
View Related
Jul 20, 2010
I have been using Opensuse since 11.0, and I never had any problems with the setup of CUPS printing (university based). Now for the first time, after many months of flawless printing using 11.2, after installing 11.3 the printing has stopped working. I use the same method: Print via print server machine -> CUPS server (IPP) and I test the connection. In my 11.2 it shows "OK", in 11.3 (I also tried with firewall off) I am getting the following (I have substituted the actual values with xxx for privacy).
[Code]...
View 4 Replies
View Related
Jan 16, 2011
i am trying to set up LAMP on an old pc i have installed linux, apache, mySQL and PHP following this guide Installing Apache2 With PHP5 And MySQL Support On OpenSUSE 11.3 (LAMP) | HowtoForge - Linux Howtos and Tutorials. i have installed phpMyAdmin but when i try and acess it i get this error
Error
MySQL said:
Cannot connect: invalid settings.
phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server.
[Code]...
View 1 Replies
View Related
Feb 4, 2010
Is there a network trouble shooting guide for OS 11.2 that I could follow? I've shot myself in the foot so I should try to fix it.
I changed the DNS server addresses and the number of IP addresses on my router. I then set my Linux system to use static IP addressing and edited the network settings for my network adapter accordingly. I can now no longer get to any web-site.
By contrast, I also updated 1 of my Windows computers in a similar way; it continues to work without problem.
View 4 Replies
View Related
Feb 17, 2010
I am trying to get internet connection on Open Suse 11.2 through my wireless connection. I can connect to my network but there is no internet connection. The internet connection does work with other Linux distros and with Windows 7 laptop and Windows XP machines. I tried turning off the firewall but still no connection. What is even stranger is I can ping Google but in Firefox I cannot go to Google.
View 9 Replies
View Related
Feb 17, 2010
I am trying to get internet connection on Open Suse 11.2 through my wireless connection. I can connect to my network but there is no internet connection. The internet connection does work with other Linux distros and with Windows 7 laptop and Windows XP machines. I tried turning off the firewall but still no connection. What is even stranger is I can ping Google but in Firefox I cannot go to Google.
View 1 Replies
View Related
Apr 27, 2010
I have some problems accessing a smb share by name. Few day ago I was able to access the share by name but seems that today I cannot access anymore. I tried to restart the computer .. but nothing happened. Notice that the dns server is responding and is working correctly.
How can I debug this problem. It's annoying because I don't know all the IP addresses of our internal servers.
View 9 Replies
View Related
Dec 4, 2010
I'm kinda new to this, and usually i get help from a computor technician at school. BUT sins its Saturday, i cant get any help, and i realy need it. Well my problem is that i cant get any internet access using eth0 at my computer. I dont know what i have done wrong, if i have done anything wrong, it just reinstalled. ANd i dont know how to config it.
View 3 Replies
View Related
Jul 16, 2011
I'm mounting a cifs share via fstab, and using both the uid and gid for the permissions when mounted (I did try with just gid set too..) My user account is part of the 'users' group.
gid=users; I get read only
uid=nobody, gid=users; read only
uid=veehexx, gid=users; RW access.
Why is that? surely if permissions are set to use groups rather than users, then it should work. How do I get around this? All my knowledge is based in the Microsoft camp - if a user is in a group, then you can assign that group to a resource and it will work.
View 4 Replies
View Related
Jan 5, 2010
I have run into a problem using FreeNX in combination with public key authentication. I have Googled myself silly, but I can't find the exact answer to my problem. I am hoping that someone here will know the answer. First, let me tell you what I am trying to accomplish:
- I don't want my ssh server exposed to the Internet with password logins enabled. I only want public key authentication.
- I want to have access to NX server from anywhere in the world.
- I want NX to use a custom keypair, not the default supplied by FreeNX.
My environment:
openSUSE 11.2 (client and server)
KDE 4.3.4 (client and server)
FreeNX-0.7.2-26.5.i586 (server)
openssh-5.2p1-9.1.i586 (client and server)
NX Client for Linux 3.4.0-5 from NoMachine (client)
qtNX Client qtnx-0.0.1SVNr281-215.1.i586 (client)
The login problem persists, whether I am connected to the same network or to another network. Since ssh logins work, I don't think a firewall is the culprit. What do I have working so far: - The ssh server on the remote host only accepts public key authentication and I can login from the client without problems. So far so good. - FreeNX is installed on the remote host, using a custom keypair.
Authentication with this key works. I can login from the client with the nx user and the public key.
[code]...
View 3 Replies
View Related
Jan 14, 2010
Trying to add some rules to fail2ban list for bind dns. How to enable logging in /etc/named.conf file, that errors will show in /var/log directoy?
View 1 Replies
View Related
Mar 10, 2010
I'm running opensuse 11.2 on a Dell laptop with a intel wifi card.
I'm at a hotel with wireless protected by the MAC address. My MAC address is already registered and allowed to connect. However when I connect, the connection hangs just a few minutes and I got disconnected.
I tried to id some problem by scanning it with wireshark, but I did not found anything.
I wonder if there's some kind of MDNS problem...
View 1 Replies
View Related
Apr 6, 2010
I want to deny access to my server by PC's from other sub LAN on my company, so I will add the lines ALL: xxx.xx.xx. to hosts.allow and ALL: ALL to hosts.deny?
VampirD
Microsoft Windows is like air conditioning
Stops working when you open a window.
-----BEGIN PGP SIGNATURE-----
[Code].....
View 3 Replies
View Related
Aug 21, 2010
I upgraded from Suse 10.3 to 11.2, since when my Win XP box can't access the Linux files. All was OK before upgrading. The Linux (Suse 11.2) can access the Win files fine using Samba and the workgroup.
View 9 Replies
View Related
Sep 14, 2010
OpenSUSE 11.3 x64 KDE I dont know what happened it is a new install thats been running for 2 weeks . Now for some reason I can not access the internet or the router. Samba is working with Dolphin I can browse shares on local network both Windblows and Linux and ping local IP's. But I can NOT ping my router (the default gateway IP) with this box or access it with firefox so no internet. A VirtualBox of XP Pro running on this box has no problems with its bridged adapter getting out and seeing the router. I disabled the firewall, added gateway IP to network settings, disabled ipv 6 from the get go, added service provider dns's to nameservers tried opendns servers also.
View 3 Replies
View Related
Apr 6, 2011
Brand new to the OpenSuse project. I'm have an old AMD Duron running 11.3 and I am having no luck in connecting to the www. I'm using a D-Link usb wireless adapter. I seem to have an IP address for the PC. here is the print from ifconfig:
wlan0 Link encap:Ethernet HWaddr 00:12:0E:45:75:F5
inet addr:192.168.2.7 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::218:eff:fec45:75f5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:246 errors:0 dropped:0 overruns:0 frame:0
[Code]...
View 3 Replies
View Related
May 11, 2011
I just did a large patch on my opensuse11.3 system (upgrade of all installed packages), and whilst my network interface works, I cannot get past my router onto the internet.
I can connect to other computers on my network (here at home), I have an IP address via dhcp from my router, but I cannot get internet access, either from thunderbird, firefox, or simply by [URL] Clearly the computer was connected to the internet just fine minutes before since I did the large patch! Also, my other computers CAN still connect to the internet.
how i can debug it? It is just too coincidental I have upgraded everything and now somethings amiss!
If it's relevant, my router is a netgear WGR614v9.
A few things I've tried...
Code:
linuxthinkpad:/var/log # /sbin/route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 * 255.255.255.0 U 0 0 0 eth1
link-local * 255.255.0.0 U 0 0 0 eth1
loopback * 255.0.0.0 U 0 0 0 lo
[Code]....
View 3 Replies
View Related
May 22, 2011
It seems I can't access smpt servers both from kmail and php. Kmail says
Code:
Sending failed:
smtp.gmail.com
The message will stay in the 'outbox' folder until you either fix the problem (e.g. a broken address) or remove the message from the 'outbox' folder.The following transport was used: ... I double checked my settings and they are correct. I can ping smtp.gmail.com. I can send emails using thunderbird on a windows box that is connected to the same network as I am.I also tried turning off the firewall through yast but no joy.
View 1 Replies
View Related
