I halted my PC with the command ssh PC "su - -c halt", I use ssh key to access the PC so it ask for the root password, but echo it on the shell
[vampird@Sharwyn]:~$ ssh shinobu "su - -c halt"
Password: ROOTPASSWD
[vampird@Sharwyn]:~$
- --
VampirD
[Code].....
I installed 11.3amd64 as a VM under Vista/VMWare Player - all worked fine. I have now installed it as a physical system. It nstalled cleanly BUT during first boot it could not access the repos. With each repo it gave the message
- download (curl) error for (repo)
- error code connection failed
- error message could not resolve host (repo)
This was followed by a message box containing
- UI syntax error
- no widget with ID 'contents
Firefox could not access the internet (cannot find server) until I disabled IPV6 (I used about:config), now it works fine. I think the repos problem is because of IPV6 - I usually have trouble with IPV6. I tried disabling IPV6 with the following (How To Disable ipv6 on SuSE Linux | Linux Poison)
[code]......
Installed a security update for samba tonight via Opensuse updater.Now, when trying to access my home network an authentication box pops up (never used to)Asks me to enter authentication for my home network.I enter my username and password and hit enter. After a few seconds the authentication box pops up again askingfor the same indicating I have entered the wrong username / password combination (which I know I have not).
View 9 Replies View RelatedI have a desktop computer running OpenSUSE 11.2 with two network cards installed. I would like to use both cards for connecting to the internet using different networks. The setting would be the following: eth0 is the main (default) card, almost all programs should use this NIC for connecting to the internet. eth1 is used only by a few programs, which have setting for selecting which network interface to use. The two NIC's are connected to different networks, so the IP address of the NIC's, the related subnet masks and gateways are also different.
Saying short, I would like to have the two NIC's as they would be in two separate computers. I can set the IP address and subnet mask of the NIC's. The main problem is that I can only declare one gateway. How can i setup this? I do not use network manager, I configure network cards using yast, but if needed I can of course use ifconfig directly.
I'm having a strange problem with my network connection/DNS. I turn computer the on and it recognizes and connects to wireless or wired but I can't access any Internet resources or my router. If I ping the default gateway, I get no response and I get DNS errors from any network services that run at start up. If I stop and start the network daemon then it all works fine until the next time I turn on my laptop. It does this for both wireless and wired connection.
I've tried to edit the network interface information in YaST but it says that configuration is handled by knetworkmanager and I have no idea where that information is accessed. I should point out that it all worked fine until I tried to connect to open WAP at my school and couldn't so I connected to the wired network. Next morning I had this problem when connecting to my home network. My questions are 1. What could be the cause of this error and 2. where does one configure the network interfaces when using knetworkmanager
i have 3 comps(running suse 11.3) and a laptop(running vista sp2). i have installed samba on all suse comps. i have a printer attached to one of the comps and it has been shared also the internet connection on that comp has been shared. all the computers are connected using lan cables through an ethernet switch. i also have a wireless router which is connected to the ethernet switch.
I am able to view all the comps on the network except the laptop running vista. all the desktops are visible on the network and are able to print and share files on the network and also connect to the internet. the laptop running vista can connect to the internet but its not visible on the network and nor can it share files across the network or access the printer.
New SUSE 11.3 install connects to network/internet etc OK with DHCP-assigned IP address. When I switch to static IP, I can no longer ping internal network, or anything else. This works OK with SUSE 11.2 on same hardware and (as far as I can see) same setup. Some diagnostics are shown below.
Firewall
Disabling the firewall makes no difference.
Not using a network manager (can't see how to assign fixed address if I do - all greyed out).
ifup eth0:
eth0 device: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
(not sure why the warning - eth0 is assigned to external in the firewall setup).
[code]....
I can't access any of the wired network settings and theres a red square with an X through it. Here are some snap shots. This is really funky.Is this red box with the X suppose to be here?
View 3 Replies View RelatedIs there a network trouble shooting guide for OS 11.2 that I could follow? I've shot myself in the foot so I should try to fix it.
I changed the DNS server addresses and the number of IP addresses on my router. I then set my Linux system to use static IP addressing and edited the network settings for my network adapter accordingly. I can now no longer get to any web-site.
By contrast, I also updated 1 of my Windows computers in a similar way; it continues to work without problem.
I am trying to get internet connection on Open Suse 11.2 through my wireless connection. I can connect to my network but there is no internet connection. The internet connection does work with other Linux distros and with Windows 7 laptop and Windows XP machines. I tried turning off the firewall but still no connection. What is even stranger is I can ping Google but in Firefox I cannot go to Google.
View 9 Replies View RelatedI am trying to get internet connection on Open Suse 11.2 through my wireless connection. I can connect to my network but there is no internet connection. The internet connection does work with other Linux distros and with Windows 7 laptop and Windows XP machines. I tried turning off the firewall but still no connection. What is even stranger is I can ping Google but in Firefox I cannot go to Google.
View 1 Replies View RelatedI have some problems accessing a smb share by name. Few day ago I was able to access the share by name but seems that today I cannot access anymore. I tried to restart the computer .. but nothing happened. Notice that the dns server is responding and is working correctly.
How can I debug this problem. It's annoying because I don't know all the IP addresses of our internal servers.
I'm kinda new to this, and usually i get help from a computor technician at school. BUT sins its Saturday, i cant get any help, and i realy need it. Well my problem is that i cant get any internet access using eth0 at my computer. I dont know what i have done wrong, if i have done anything wrong, it just reinstalled. ANd i dont know how to config it.
View 3 Replies View RelatedI am reasonably literate, but grew up with DOS and Windows. I tried ubuntu before and found it ok but never persevered.
I have just installed 11.3 32-bit and I cannot access the web. I first tried using a usb wireless (Belkin F5D7050 - Ver. 3) it seems to be recognised and functioning but no web access. I can ping that's all. Can't access internet repositories either.
I then tried a wired connection. Again it seems to be recognised and I can ping successfully but no web access or repositories.
I'm mounting a cifs share via fstab, and using both the uid and gid for the permissions when mounted (I did try with just gid set too..) My user account is part of the 'users' group.
gid=users; I get read only
uid=nobody, gid=users; read only
uid=veehexx, gid=users; RW access.
Why is that? surely if permissions are set to use groups rather than users, then it should work. How do I get around this? All my knowledge is based in the Microsoft camp - if a user is in a group, then you can assign that group to a resource and it will work.
I have run into a problem using FreeNX in combination with public key authentication. I have Googled myself silly, but I can't find the exact answer to my problem. I am hoping that someone here will know the answer. First, let me tell you what I am trying to accomplish:
- I don't want my ssh server exposed to the Internet with password logins enabled. I only want public key authentication.
- I want to have access to NX server from anywhere in the world.
- I want NX to use a custom keypair, not the default supplied by FreeNX.
My environment:
openSUSE 11.2 (client and server)
KDE 4.3.4 (client and server)
FreeNX-0.7.2-26.5.i586 (server)
openssh-5.2p1-9.1.i586 (client and server)
NX Client for Linux 3.4.0-5 from NoMachine (client)
qtNX Client qtnx-0.0.1SVNr281-215.1.i586 (client)
The login problem persists, whether I am connected to the same network or to another network. Since ssh logins work, I don't think a firewall is the culprit. What do I have working so far: - The ssh server on the remote host only accepts public key authentication and I can login from the client without problems. So far so good. - FreeNX is installed on the remote host, using a custom keypair.
Authentication with this key works. I can login from the client with the nx user and the public key.
[code]...
Trying to add some rules to fail2ban list for bind dns. How to enable logging in /etc/named.conf file, that errors will show in /var/log directoy?
View 1 Replies View RelatedI'm running opensuse 11.2 on a Dell laptop with a intel wifi card.
I'm at a hotel with wireless protected by the MAC address. My MAC address is already registered and allowed to connect. However when I connect, the connection hangs just a few minutes and I got disconnected.
I tried to id some problem by scanning it with wireshark, but I did not found anything.
I wonder if there's some kind of MDNS problem...
I want to deny access to my server by PC's from other sub LAN on my company, so I will add the lines ALL: xxx.xx.xx. to hosts.allow and ALL: ALL to hosts.deny?
VampirD
Microsoft Windows is like air conditioning
Stops working when you open a window.
-----BEGIN PGP SIGNATURE-----
[Code].....
I upgraded from Suse 10.3 to 11.2, since when my Win XP box can't access the Linux files. All was OK before upgrading. The Linux (Suse 11.2) can access the Win files fine using Samba and the workgroup.
View 9 Replies View RelatedOpenSUSE 11.3 x64 KDE I dont know what happened it is a new install thats been running for 2 weeks . Now for some reason I can not access the internet or the router. Samba is working with Dolphin I can browse shares on local network both Windblows and Linux and ping local IP's. But I can NOT ping my router (the default gateway IP) with this box or access it with firefox so no internet. A VirtualBox of XP Pro running on this box has no problems with its bridged adapter getting out and seeing the router. I disabled the firewall, added gateway IP to network settings, disabled ipv 6 from the get go, added service provider dns's to nameservers tried opendns servers also.
View 3 Replies View RelatedBrand new to the OpenSuse project. I'm have an old AMD Duron running 11.3 and I am having no luck in connecting to the www. I'm using a D-Link usb wireless adapter. I seem to have an IP address for the PC. here is the print from ifconfig:
wlan0 Link encap:Ethernet HWaddr 00:12:0E:45:75:F5
inet addr:192.168.2.7 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::218:eff:fec45:75f5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:246 errors:0 dropped:0 overruns:0 frame:0
[Code]...
I just did a large patch on my opensuse11.3 system (upgrade of all installed packages), and whilst my network interface works, I cannot get past my router onto the internet.
I can connect to other computers on my network (here at home), I have an IP address via dhcp from my router, but I cannot get internet access, either from thunderbird, firefox, or simply by [URL] Clearly the computer was connected to the internet just fine minutes before since I did the large patch! Also, my other computers CAN still connect to the internet.
how i can debug it? It is just too coincidental I have upgraded everything and now somethings amiss!
If it's relevant, my router is a netgear WGR614v9.
A few things I've tried...
Code:
linuxthinkpad:/var/log # /sbin/route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 * 255.255.255.0 U 0 0 0 eth1
link-local * 255.255.0.0 U 0 0 0 eth1
loopback * 255.0.0.0 U 0 0 0 lo
[Code]....
It seems I can't access smpt servers both from kmail and php. Kmail says
Code:
Sending failed:
smtp.gmail.com
The message will stay in the 'outbox' folder until you either fix the problem (e.g. a broken address) or remove the message from the 'outbox' folder.The following transport was used: ... I double checked my settings and they are correct. I can ping smtp.gmail.com. I can send emails using thunderbird on a windows box that is connected to the same network as I am.I also tried turning off the firewall through yast but no joy.
I don't know what I did but I can't connect to the network any longer. KNetworkManager finds it but I can't connect. It stops at waiting for authorization. I've been connected before and it still works in xubuntu but something happened here. Here is what /var/log/messages/ says
Code:
Apr 1 20:06:27 linux-ec26 kernel: [ 2568.174423] wlan0: authenticate with AP 00:12:1e:b3:2b:02
Apr 1 20:06:27 linux-ec26 kernel: [ 2568.175913] wlan0: authenticated
Apr 1 20:06:27 linux-ec26 kernel: [ 2568.175916] wlan0: associate with AP 00:12:1e:b3:2b:02
[code]....
Today I changed my home router's security setting from WPA to WPA2, and my openSUSE 11.4 Tumbleweed system's network stopped working.It is very strange, because it can connect to the wireless no problem and it gets ip address and everything, but I cannot access any websites. I tried to revert the router setting back to WPA, but still the same.Funny thing is I can actually open the router admin page.
Even I plugged the wired lan cable to my laptop, but still the same. It connects, but no internet.Where should I look? My the other laptop with openSUSE 11.4 connects to the same router without any problem.
The desktop computer stores most of our family's files and is mostly powered on, installed with Debian/openSUSE (KDE4).
We have 2 more portable (also Linux, KDE4) computers and frequently need to access files stored in the desktop. Currently file transferred is by usb thumbdrive which is troublesome.
The computers are all connected to a wireless router that provides access to the internet.
Reading/goolging and understand that there are many ways to share files to the extend that I am lost - Samba, NFS, SSH .....
My problem is to find out: What is the best way to access computers within the local network? "Best" here means:
- Secure
- Relative ease to setup
- Easy to use, file access with GUI (file manager?) as the entire family is using the computers.
I am using openSUSE 11.2 and had the same issue once before in openSUSE 11.1 After some time, two domains I use very often can't be accessed any more, these are: Google and [URL]... (am doing some OO development recently). At the time where I write this post, only these two are "blocked".
When I try to access these two domains using Firefox, w3m or telnet, it tries to open the connection forever. Ping works fine. I tried opening the IP directly in the browser, but same problem, the connection never reaches. I know it's not a router issue, as the other computers can access these domains. Still, I tried to restart the router, but the issue persists. I tried restarting the network service (/etc/init.d/network stop + start), also nscd, without success. The only way I found to make it work again is to reboot. This problem reappears from time to time, after using the computer for a long time, and accessing these domains a lot of times. Note that I also use suspend to disk, so the "blocked" state is kept after resume. Only reboot "cures" it.
i work in an office with individual p/c's (all with windows xp) connected to a windows server. i have installed opensuse 11.2 on my work's p/c (as a dual boot) but have no idea what to do so that i can access files on the windows server. can some kind person point me in the right direction.
View 3 Replies View Relatedrecently ran into a problem with my internet access. Im using open suse 11.2 on a Dell Vostro 1520 laptop. I managed to get my wlan running and i can use firefox to access my router. In my router the laptop is also showing as connnected, dhcp reserved an ip for it.However if i try to browse the internet, no page is loading, actually no software that needs access to the web is working.
View 3 Replies View Related