OpenSUSE Network :: KNetworkManager Connection - Never Obtain An IP Address From Wireless Router
Feb 24, 2010
I have an open WEP wireless internet connection with a security key. KNetworkManager can never obtain an IP address from my wireless router, but I know that the router works because Windows can connect correctly and Ubuntu's NetworkManager can connection correctly. Does anyone know what is happening? KNetworkManager just asks for my security again and again and again after it fails to connect.
View 8 Replies
ADVERTISEMENT
Feb 19, 2010
I believe I have the wireless card installed properly and wicd sees the router. When I try to connect I get an error "can not obtain IP address" Output from iwcongif and lspci is.
dillan@dillan-desktop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code]....
View 9 Replies
View Related
Mar 5, 2010
I'm using Ubuntu 9.10 and I recently changed certain settings of my router. After that ubuntu isnt able to obtain IP address from this wifi network. I've tried to connect with win 7 and OS X and both of the OSes are able to connect to the same wifi network. I tried to connect ubuntu to another wifi network at school and it connected successfully.
View 7 Replies
View Related
Apr 1, 2010
My first problem is that when I open KNetworkManager the wireless tab is desibled,I don't know why! My laptop is HP pavilion dv6-1245DX. How to get connected to my wireless router?
View 9 Replies
View Related
Jan 17, 2010
I'm using Ubuntu 9.10 and for a while I had no problems connecting to the internet through the wireless network. But recently, my wireless connection started disconnecting regularly. Following an advice I found online, I installed linux-backports-modules-karmic, but after a reboot the wireless device stopped working altogether - it had lost its driver. Since then I managed to associate the device with Broadcom's STA driver, which I had been using before. But now, the wireless device cannot connect to the internet anymore. The network manager's output to /var/log/syslog indicates that the device cannot obtain an IP address. When I run code...
View 4 Replies
View Related
Dec 2, 2010
No improvement since I first reported this problem, I am hoping somebody can now advise.
Using openSUSE11.3 Linux 2.6.34.7-0.5-default i686 with kde 4.4.4 release 3.Problem is the wait of sometimes over 2 minutes before the wifi connection is available.Two questions:-
1. Why does it take so long? Longer by far than it to be with previous openSUSE releases. Much longer than with that other OS!!!2. How do I remove the wallet process. Not needed in present environment so I would like direct connection without having to open wallet. I didn't set this up, it just happened after I had upgraded to 11.3 and I need to know how to disable it to save time.
View 8 Replies
View Related
Apr 17, 2010
at start, knetworkmanager detect wireless network, but doesn't automatically connect - I have to restart it to make it work properly. Instead, it gives that error:
[Code]...
View 2 Replies
View Related
Feb 1, 2010
I have built 11.2 on several laptops and knetwork manager startup for wireless is not consistent. I can't figure it out. Sometimes the options "Create Network Connection" and "enable wireless" are greyed out. Other times they are fine. What is the secret to getting the options to appear in my window tray all the time? I always select knetwork manager as the default when I do a clean build.
View 3 Replies
View Related
Jan 30, 2010
I am having a persistent problem with getting a wired network connection under a recent install of Ubuntu 9.10. The network manager will show the wired network as 'disconnected' after a restart. This is true whether I am connected directly to my ISP's modem, or through the Linksys router that I usually use.The output of ifconfig suggests that eth0 is not being assigned an IP address:Code:I have reached the limits of my own ingenuity.
View 9 Replies
View Related
Feb 13, 2010
Running kubuntu karmic, kernel 2.6.31-19, on Asus EEE PC 1000.
WICD 1.7.0. hangs on "wired connection: obtaining ip address...". I have downgraded to 1.6.2 and 1.5.9, but this did not solve the issue.
WICD does work under other circumstances, e.g. wireless connection. (But at home I don't have wireless, but just the modem and ethernet.)
Same wired connection ethernet connection works flawlessly on laptop running Windows XP SP2.
View 1 Replies
View Related
Nov 19, 2010
I just installed ubuntu 10.10 on my laptop Dell Inspiron 1525. Wireless internet is not working. I installed wicd network manager and I am able to see the available wireless networks. My wireless connection is encrypted. I have tried all encrypted options with the key but no avail. It says "Cannot obtain an IP address" after validating authentication.
View 2 Replies
View Related
Nov 1, 2010
I changed the network setting and caused a problem of wireless network. After I completely reinstall the OS of Fedora 13, the wireless network is still incorrect for connection to router.
View 4 Replies
View Related
May 26, 2009
My computer takes a while to connect to my Linksys N router.
It used to connect in a snap of your finger automatically.
Now it does not.
Yes I have tried manual configuration, and double checking the password, ssid, protocols, and security type.
WPA2 personal is the security type.
There are maybe 4 different ways I know how to connect. The most annoying thing is when this box pops up saying to type in a password for the network connection.. and keeps popping up even when everything is right.
All I need is a reliable, easy, and automatic program to connect me to the internet, maybe even before I log into my system.
Linux Ubuntu 8.04 LTS Desktop Edition is my system. Brilliant system.
View 4 Replies
View Related
Mar 13, 2010
The IP address acquisition problem I reported earlier has returned, and I am stymied. To recap: Ubuntu 9.10 would not obtain an IP address via a wired Ethernet connection. I resolved the problem at the time by configuring eth0 in /etc/network/interfaces:
Code:
auto eth0
iface eth0 inet dhcp
and disabling Network Manager in Preferences > Startup Applications.After a powering down the PC today, the problem has returned. It appears that dhclient cannot obtain an IP address. This is true whether I am connected to the router (a Linksys WRT54G running Tomato), or directly to the DSL modem. When my usually wireless Ubuntu 9.10 laptop is wired to the router, it obtains an address almost instantly. I have made no changes to the network configuration since January. I have tried to keep current on Ubuntu updates.
Code:
jgb@alienware:~$ ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:30:1b:ac:5b:9e
inet6 addr: fe80::230:1bff:feac:5b9e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]...
View 4 Replies
View Related
May 16, 2011
So up until I updated from Opensuse 11.3 to 11.4, I hadn't any issues with my network connection. At least none worth mentioning. Once I installed 11.4, I've had weird issues with varying lengths of connection. Sometimes I can't connect anywhere, sometimes I can only get to the router, sometimes I'm 100%. I'd fiddle with YAST until everything worked. I honestly have no clue whether or not anything I did had any effect.
Enough of the iffy history, here's what's happening now. For the past few weeks up until last night, I have been at 100% connectivity. I never turned off my computer until last night (it just shut itself off, like the cord was unplugged. I dunno what happened, maybe it was my foot, maybe the PSU. I think it has happened before.). When I turned it back on, I was only able to connect as far as my router (192.168.1.1, a D-Link Gaming router that has always been very good to me). I could not make it to my modem (192.168.0.1, a Quest DSL modem. Once I can get here, then usually I'm good to go 100%).
I tried again this afternoon, and no change. I then get the crazy idea to unplug the ethernet cable from it's PCI-card home and return it to the onboard port (which I long ago declared defunct). Immediately after plugging it into that port, I ran "ping 192.168.0.1" and I started getting returns. I open up Firefox and try to load an external page, and nothing happens. I go back to the console that I was pinging from, and it had stopped. I start pinging my router, and no luck. What I conclude from my little experiment is that the router is not at fault.
1. It did not change at all between being at 100% and being at 0% after reboot.
2. I was able to get returns from the modem, past the router, for a brief period of time while using the defunct ethernet port.
Since I never had these problems before updating to 11.4, I'm inclined to believe that it was the update that started these problems.
View 9 Replies
View Related
Apr 8, 2010
I clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
View 1 Replies
View Related
Feb 16, 2010
I have router and wireless card Linksys. Driver are installed correctly for wireless card.
Using WifiRadar I can see the access point is detected.
DHCP woks perfectly for wired lan.
However when I try to connect to the detected access point the ip addres is never retrieved and the connection never established.
I tried most of he basic instructions posted on ubuntu forums, but the problem doesn't seem to be with basic configuration: driver, essid, wep key, etc..
The problem seems to be with DHCP not able to retrieve an IP address from the DHCP server of the router. Of course the router works file with other laptops (windows based) that have wireless card.
I also tried the Network Connections setup part of ubuntu. That one shows the access point by its essid name in the list of wireless network, but when I try to connect it takes sometime and eventually asks for the wep key, which I provide and then it times out and keep asking it. The same wep key works for other pcs.
Can't figure it out. I am using ubuntu 9.10.
Some more details are the following:
1) Here the output from the log file: /var/log/wifi-radar.log
Of course it is set ... and dhcp client works for wired lan anyway.
2) diego@mysuperlaptop:/var/run$ sudo iwlist wlan0 scan [sudo] password for diego:
I tried everything I could think about in the UI windows setting (WifiRadar and Wireless Network Connections) a well in the config files from the shell. I just don't get what the deal is. I am pretty sure it is a DHCP issue but can't figure out what.
View 9 Replies
View Related
Jun 20, 2010
I'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies
View Related
Apr 15, 2010
All settings are correct as far as i can tell. The wep key works on all my windows boxes. When i have connect automatically enabled it never tries to connect. if I go to edit it it pops kde wallet up i put in credentials. wallet goes away then nothing happens. if i double click connection to my router also nothing happens. I have the wep key in there and i even made it visible to make sure.
View 5 Replies
View Related
Apr 9, 2010
I've just installed opensuse 11.2 with the network installation iso. During the installation, it has got the IP via DHCP without any problem, and I has downloaded all the needed packets without problems... But when the installation finish.I have no network connection It's strange, because I have IP address, I get the IP from the DHCP server, and I can see the IP addreess if I do "ifconfig", the default route and even the DNS servers in the resolv.conf file; but I cannot ping my gateway (that is the DHCP server as well!!), I cannot ping anything in my network and either anything in internet. I see a network error at the start, but it finally gets the ip address. In the dmesg, the last message repeats over and over. The machine is a Hyper-V virtual machine, but as I said... I worked very well during the installation, I don't know what is going on. I've tried to reinstall, but it doesn't make any difference
View 2 Replies
View Related
May 28, 2011
When I attempt to connect to a wireless network, the network manager asks me for the network's password, then says 'setting network address' for 20 or so seconds, then asks me for some random Hex or ASCII key in the same type of window I put the password in (Secrets for Noel -- KDE Daemon). Since a key is already typed into the window, I press OK, which then causes the network manager to go back to 'setting network address', then the window pops up again and keeps repeating itself.
I'm running Opensuse 11.4 with KDE, and my driver is ath9k. I don't know much about linux so please don't tell me to 'recompile this' or 'change this setting' without explaining how to do it. Please help, I've been unable to connect to wireless in OpenSUSE for 2 weeks now.
View 9 Replies
View Related
Jul 15, 2010
I did a fresh install,I also enable the networkmanager.after installation,my wireless unable to connect to my router . when I click to connect , it prompt for password then after that nothing happen.
View 8 Replies
View Related
Mar 17, 2011
Desktop that has wireless built into motherboard worked in 11.3 (as best as I can remember, don't really use it normaly). Trying to connect to my wireless router (only one I have rights to).Wireless router is WEP with opensystem authentication, works fine for laptop (Windows)Networkmanager scans and displays local networks
Networkmanager shows:
acivating
setting network address
connection failed
[code]...
View 3 Replies
View Related
Jul 29, 2010
I am using a fully up to date openSUSE 11.3 and today, I decided to upgrade my KDE 4.4.4 to Factory. The update went without a hitch, everything continued to work, including all of the items in my workspace.So now I am running KDE 4.4.95 and it looks nice. I like the new System Settings where the advanced tab is gone and everything is presented in a single window.
The only snag I have hit so far, is that Knetworkmanager no longer displays the network that I am connected to when I right click its icon in the tray. The screenshot may make clear what I am talking about.I am currently connected via a wireless network, which nm-tool confirms. However, it is not shown in the Knetworkmanager menu.
View 2 Replies
View Related
Apr 14, 2010
I am running openSUSE 11.2 and just recently my network has been down. I'm using Gnome, but using Yast to configure my network (I'm usually forced to use wireless as I travel a lot on my laptop). Usually, when I'm connected to a wireless network, it will show up as so in the Gnome start menu, but recently, it will only say Wired there, even though I have nothing connected to my ethernet jack. I can connect wirelessly to a home router, but cannot use the wireless in any other way. I have tried manually disabling the ethernet connection to no avail. Unfortunately I am limited in my linux knowledge, so I am kinda stuck here.
View 1 Replies
View Related
Jun 19, 2011
I have an adsl modem acting as a bridge to my router my setup was working well for more than year now , but then the internet went slow . I set the modem back to PPPoE the problem was with the DNS server of the ISP so using ifup i set the dns t 8.8.8.8 (google) the connection is back , but when i set the modem back as a bridge slow internet does the router know that my dns is 8.8.8.8 or i should set the dns on the router ? I can't see an option to set the dns on the router ( i just enter my username and password from the isp to use PPPoE mode ) by the way i called the isp support they kept telling me to restart , i told them i did but i never restarted my pc . I'm sure if i tell them i'm running linux they will blame the os !
View 2 Replies
View Related
Apr 23, 2011
I own an ASUS N61JV-X2 notebook PC. It has an Atheros Communication, Inc. AR9285 Wireless Network Adapter. 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 0280: 168c:002b (rev 01) I cannot see any SSIDs including my home Verizon FiOS 802.11 G WPA2-AES-TKIP encrypted network. I went to Starbucks to try to connect to their free Wi-Fi and I could not make a connection. How do I solve this problem so that I can connect to a SSID of my choice and make a wireless connection while using GNOME 3?
View 2 Replies
View Related
Jan 7, 2010
I just installed openSUSE dual-boot with windows. Wireless works fine on windows. Only ethernet works on openSUSE. At first, it couldn't even find my wireless network. With my friend's help we experimented and tried everything to find the driver for my broadcam4312 driver.
Later, my friend some update from the official openSUSE peeps... Then, the wireless could my network. I entered in my password and then hoped for the best but then it got stuck on the Obtaining IP Adress part. I know I got the rite password.
View 9 Replies
View Related
Apr 24, 2010
I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.
Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.
Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).
The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.
Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).
Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.
Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).
My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?
Here is a link to (picture) my network diagram. Network Diagram
View 2 Replies
View Related
Jan 31, 2010
Since 11.2, I am using Knetworkmanager for getting connected to the internet.But is getting disconnected on its own every now and then. I used Kinternet when I was on 11.1 and it worked fine, Infact I would prefer kinternet over knetworkmanager anyday. But in suse 11.2, having both KDE3 and KDE4 libraries does make system work unexpectdly. I tried installing Kinternet once but after that kontact kept crashing (because of clashes between kdelibs3 and kdelibs4).Can anyone help me finding out the problem in knetworkmanger.. here is entry in /var/log/NetworkManager when I got disconnected..
Code:
Jan 31 14:38:27 linux-9psh NetworkManager: <info> (ttyUSB0): device state change: 8 -> 7 (reason
[code]...
View 1 Replies
View Related
