OpenSUSE Network :: Wireless Connection Says "active" But Nothing Connects?
Jul 2, 2010
During the installation of Opensuse 11.2, I tried the wireless internet connection, and it kept coming back failed.I continued to install the system and when I got on, I entered the SSID (think that's the right way to say it), and the password.When showing that 'map' or whatever, it showed the SSID in the networkmanager.It also said "active".But when clicking on Mozilla Firefox, nothing happened. It just said the server is down.I'm on another Linux system now; so I know the wireless works. It worked great on a third one as well.It is some Atheros Communications, AR5001.I'm not sure what other information you need. Just let me know and I will do what I can to provide. I don't have opensuse up at the moment. I screwed up the dual boot. so right now it's been erased. I'll ask for help on that in another topic.
View 9 Replies
ADVERTISEMENT
Jan 24, 2010
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
View 5 Replies
View Related
Aug 5, 2010
I am getting trouble with knetwork manager. I created a new connection by scanning and connecting using knetwork manager. But every time connection gets disconnected and ask for password and again it connects.
View 8 Replies
View Related
Jan 7, 2010
Got a laptop with a RTL8187B wlan card, installed opensuse 11.2 on a 50gb partition. Card was detected straight away but only connects when I enter ip addresses manually, DHCP don't work.
When it is connected it always stays at a speed of 1mb/s and it cannot ping my router or anything else.
Me kernel is 2.6.31.8-0.1-desktop
Searched around the forums but no love, tried compat-wireless but it started crying about dependencies. Modprobed it too..
View 8 Replies
View Related
Mar 9, 2010
In openSuse I can connect to a wireless network. It says that it is connected, and I can open the router page (http://192.168.1.1/basic.html). But I cannot load any other pages. Nothing else recognizes internet either; I tried using konqueror, YAST and wget with the command line, and none of them could load anything. It is not a router problem or a wireless card problem because both Ubuntu and Kubuntu can connect, from the same computer. I know this is odd because in the only other thread I could find with this issue, it was a different distro and installing openSuse seemed to fix it.
Hardware:
Computer: Yakumo Notebook model 331
Network Card: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
View 5 Replies
View Related
Jun 17, 2010
System Information:openSUSE v11.2 32-bitdesktop: KDE 4.x (.3 I think)Background info: Installed openSUSE 11.2 on an old HP laptop this morning. I've been trying to set up my wireless connection since. After 2-ish hours of searchingupport forums, I managed to use network manager to connect to my home wireless network via WEP, I will say now that I've had lots of trouble.
I've finally been able to connect to my network, to a point. The NetworkManager in openSUSE says that the wireless connection is active. I can verify this by saying that on the other conputers in my house (winXP, win7, and Ubuntu v9) I have been able to ping this openSUSE computer and my router recognizes it as part of the network. Here is where the problem arises: I cannot access the internet from the openSUSE machine, with a domain name or by trying to type in an ip address, and I cannot ping other computers on my network with it.
View 9 Replies
View Related
Jun 11, 2011
My problem is exactly the same as [URL]
but I am stuck at the last hurdle
here are the output of the command that helped to solve the case in the previous post:
ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:1b:77:d2:59:55
inet6 addr: fe80::21b:77ff:fed2:5955/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code].....
I have also tried sudo dhclient but it hasn't helped and I am still unable to connect to the internet
View 1 Replies
View Related
Jan 9, 2010
I've got a Zotac MAG HD-ND01 with XBMC live installed. This is built on Karmic Koala and runs very nicely through the wired NIC.
I configure the box using a cable. I'm using WPA2-PSK and it is clearly authenticating OK.. It gets an IP address.. the AP shows a connection to the box. My XP laptop connects to the access point OK.. just can't connect to the box via the wireless, and it can't see the network using wireless.
I have followed a number of threads on connecting Atheros 9XXX wireless [URL] but no joy.
Also, can Ubuntu connect to the AP at any speed greater than 54MB? My windows PC connects at 144MB+ . Will ndiswrappers connect at those sorts of speeds?
lspci -nn
04:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
iwconfig
lo no wireless extensions.
[Code]....
View 1 Replies
View Related
Apr 23, 2011
I own an ASUS N61JV-X2 notebook PC. It has an Atheros Communication, Inc. AR9285 Wireless Network Adapter. 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 0280: 168c:002b (rev 01) I cannot see any SSIDs including my home Verizon FiOS 802.11 G WPA2-AES-TKIP encrypted network. I went to Starbucks to try to connect to their free Wi-Fi and I could not make a connection. How do I solve this problem so that I can connect to a SSID of my choice and make a wireless connection while using GNOME 3?
View 2 Replies
View Related
Jul 29, 2010
I am using a fully up to date openSUSE 11.3 and today, I decided to upgrade my KDE 4.4.4 to Factory. The update went without a hitch, everything continued to work, including all of the items in my workspace.So now I am running KDE 4.4.95 and it looks nice. I like the new System Settings where the advanced tab is gone and everything is presented in a single window.
The only snag I have hit so far, is that Knetworkmanager no longer displays the network that I am connected to when I right click its icon in the tray. The screenshot may make clear what I am talking about.I am currently connected via a wireless network, which nm-tool confirms. However, it is not shown in the Knetworkmanager menu.
View 2 Replies
View Related
Jun 8, 2010
When my router switches off... the wifi signals go off... then why the hell ubuntu keeps on connecting to that very wifi like hell and when doesnt connect shows the prompt to manually connect... with the wifi key already filled in... whats the use of saving the key when it has to ask the question from me either to connect or not?? and if its isnt available... just wait when its available.. and for the prompt,i have only option to cancel(because wifi isnt available at that moment if i select connect it again tries to connect like hell..which it cant) and if i cancel it wont auto-connect when wifi does get available! what the heck?
Windows has this done the right way... when the wifi isnt available.. it dissconnects silently.. and when it becomes available connects silently.. why isnt this been done this way in ubuntu??
Ive attached an image..one can see in the image that it says "authentication required by wireless network" when there isnt any.. as router has gone down!
And the second thing i want to report is that there is no way to report this bug from ubuntu... the launchpad.net talks of going through bug reporting process which is done against a definite package... now how does a user know which package would be causing this error?? there should be a more clear process of reporting such bugs to ubuntu team... which a common man using ubuntu( ubuntu says its most user friendly of all distros right?) can report..
View 1 Replies
View Related
Dec 20, 2010
im having a problem setting ad hoc wireless network between two opensuse boxes, using network manager, every time im about to smash the box, maybe im doing something wrong in the steps or something idk
how to set up ad hoc connectionl
note: im a linux rookie
View 3 Replies
View Related
Mar 9, 2011
I have installed opensuse 11.3. I am unable to connect to my wireless connection. KNetworkManager finds the connection (when I scan for connections), I can enter the WEP Hex key, it says it is configured. Goes through its "check list" when you click "ok", and all seems good. But it won't connect. When I run "nm-tool" I get:
State: unknown
WARNING **: error: could not connect to NetworkManager
Just ridiculous, brand new, up to date OS, and its this difficult to connect to a wireless router!
View 1 Replies
View Related
Jan 15, 2010
I've installed opensuse 11.2 on an old IBM thinkpad. The install went without a hitch and when I got to the desktop I inserted my Dlink DWL-G132 wireless USB adapter. Opensuse immediately recognised that a wireless device was attached and I could see my wireless network listed. I entered my WPA password and was able to connect to my routers configuration page by entering 192.168.0.1 in the URL bar of firefox. For some reason I am unable to navigate to any webpage. When I enter a URL firefox acts as though there is no internet connection. The only way I can get the internet on my laptop is to connect it to my router with a cable. I used a wired connection and ran the update utility thinking that perhaps an update would fix the issue but it did not. I know the adapter works because the laptop used to have windows xp installed and I could connect fine with that.
Does anyone here have any idea why I would be able to connect wirelessly to the routers configuration page but not to the internet? I appreciate any advice anyone may have.
View 9 Replies
View Related
Mar 6, 2010
I have been running SUSE 11.1 on my HP laptop for over a year. For the most part, I am thrilled with it. However, when I awaken the computer from hibernation mode, I have to go into the Network Settings applet proceed with the wizard in order to get my wireless connection working.
Another irritating aspect is that if I go to a place with a Wireless Hotspot, the computer doesn't automatically pick it up. Again, I have to go through the Network Settings applet to get it working.
I want this to work as it does on Windows XP/Vista where I can put the computer to sleep and when I awaken it, then the wireless connection is automatically there for me, etc.
I have to think I probably need to tweak a setting somewhere, so if someone can tell me where to do this, great!
I am using an internal wireless card (Atheros AR928X PCI-EXPRESS). If you need additional info, let me know.
View 3 Replies
View Related
Mar 7, 2010
I just installed Opensuse 11.2 dual-booting with Windows 7 on a laptop. I have the wireless set up and connected, but I can't seem to be able to connect to any websites or ping Google, etc.I'm kind of a Linux newbie, so I'd like to get some advise as to what I can check to get it working? (Windows 7 on the same machine is able to connect - I'm using it now)
- I've tried both automatic DHCP configuration and also setting the ip/dns server manually, no luck
View 4 Replies
View Related
Mar 10, 2011
I'm using the new opensuse 11.4 with KDE desktop. I can connect to my WPA2 personal network fine, but some other networks, like a WPA2 enterprise network connects, but no Internet(pinging too) resolves.
View 2 Replies
View Related
Mar 14, 2010
I just loaded 11.2 & Kde 4.3. Installed both Kinternet and Kppp. My modem is a USR PCI HW modem 2976. Hardware Info shows it connected to /dev/ttyS4. I configured the modem with Yast as modem0. The user access box is checked for Kinternet Both Kppp and and Kinternet will dial out.
The connect response comes back from the ISP and either of the dialers will hang and the dial tone comes back. The firewall is showing modem0 in the External section. Nothing changes if I shut the firewall off.There's nothing in the dmesg I could find. Could this be a pppd permission problem?
View 5 Replies
View Related
May 16, 2010
I've my OpenSuse installed both on laptop and PC.
The kNetworkManager works well on the laptop both on user account and root account. It connects to my mobile broadband fine.
The problem appeared on my PC. When I log into root account - everything seems to be fine, It connects through knetworkmanager - The cellular connection gets activated, I see X and a heart near "Activated". root account reads my DNS'es from resolv.conf
When I only log into the user account (not as root), the knetworkmanager connects - but as I've checked - it seems that it doesn't use the DNS adresses I've entered in resolv.conf (netconfig_dns_policy is set to "") so I can manually add openDNS to the resolv.conf). It just connects -
I did CHMOD the files resolv.conf and config in sysconfig/network - no luck.
The only way to bypass this is logging to root first - connect there, then switch to user while staying connected... but I think it's an annoying solution.
logs contain this when connecting from user account:
Code:
May 16 10:30:52 jaychyl-1-linux pppd[24965]: Plugin /usr/lib/pppd/2.4.4/nm-pppd-plugin.so loaded.
May 16 10:30:52 jaychyl-1-linux pppd[24965]: pppd 2.4.5 started by root, uid 0
May 16 10:30:52 jaychyl-1-linux pppd[24965]: Using interface ppp0
May 16 10:30:52 jaychyl-1-linux pppd[24965]: Connect: ppp0 <--> /dev/ttyUSB0
[Code]....
View 9 Replies
View Related
Mar 11, 2011
I have just done a new install of the latest opensuse 32bit and for some reason I cannot connect to the internet, when I click on mange connections the vpn tag is highlighted and all the other tabs are grayed out and I cannot select them. So I can't setup a internet connection wired or wireless. I was just using Kubuntu and did not have this problem. My card is broadcom.
View 9 Replies
View Related
Sep 26, 2010
Having just installed OpenSuse 11.3, NetworkManager identifies my wireless network, but repeatedly fails to make a connection. Without further ado, here are the outputs to commands requested in the first sticky thread:
[Code]....
View 7 Replies
View Related
Apr 23, 2011
I think I've read every post here about the Broadcom and connection.I thought I tried everything.Turns out (read Chapter�35.�Using NetworkManager) using Connection Manager (K Network Manager) you can not use, what I wanted to use, 'all users, use connection' or said another way, the wifi would be activated and connected Before the user 'logs in'. Well, as I said, it turns out that if you are using gnome, this will work with NetMgr, but NOT in KDE. If you want to use 'system connect' then you have to use 'traditional' if in YaST2. Oh well, at least 'i'm' connected.... (i'm the only user, so not a big deal right now, but would like to get it working...)
View 2 Replies
View Related
Mar 29, 2010
I got ubuntu working fine on my netbook and wanted to play around with opensuse. I have it installed and everything works fine except my wireless connection. I have updated everything since the installation through a wired connection, that didn't help. I have read the stickies, but to be honest, I'm so new to this stuff I'm kinda lost. So my wireless network has a WEP encryption and I have entered that password as a 64 HEX Key in the Wireless Manager widget. It connects to the network and says is labeled as active, however there is still the yellow exclamation shield next to the connection. Firefox and other apps don't have access to the internet.
View 9 Replies
View Related
Oct 2, 2010
I installed 10.3 (after buying it a couple of years ago and letting sit on the shelf) and can't get it to configure my ethernet connection or my wireless card. Yast doesn't include a list of available cards, and the error I get in installation-network setup is that the kernel isn't present. The machine I'm installing this on is a Lenovo, in which there isn't a discrete ethernet card (it's in the motherboard), but my wireless card (a Cisco LINKSYS 802.11G) is a discrete card. Because I'm divorcing Microsoft for a number of valid reasons, I don't have Windows available on that box.
View 4 Replies
View Related
Feb 24, 2010
I have an open WEP wireless internet connection with a security key. KNetworkManager can never obtain an IP address from my wireless router, but I know that the router works because Windows can connect correctly and Ubuntu's NetworkManager can connection correctly. Does anyone know what is happening? KNetworkManager just asks for my security again and again and again after it fails to connect.
View 8 Replies
View Related
Jan 22, 2011
I've just installed openSUSE 11.3 for the first time on a Dell E1505 notebook and am having problems connecting to my home wireless network. Using the Network Manager I've been able to find my home network and connect after entering the network password. After a minute or two the wireless network is still shown as active but their is no connection (websites will not load).
I'm completely new to Linux so I have almost no clue what could be causing this. I have tried connecting the notebook hardwired (Ethernet) to the router and get a perfect connection if that information helps any.
View 3 Replies
View Related
Jul 25, 2011
I have a wireless cable modem/router and a PCI-E 1x wireless card in my desktop PC. It works perfectly until I connect my Ethernet cable to my local router and printer, no more internet connection. I am guessing there is a setting somewhere that tells the networking software that the hard wire connection is the primary internet gateway. How do I tell it to use the wireless as the primary gateway?
View 4 Replies
View Related
Jun 7, 2010
I have a question regarding the configuration of Network Connection. My wired connection is fine right now and when I check the network connection applet, it display active information of eth0. However, when I click the Configure button, the Network Connection window appears but there's nothing in the Wired panel. Should there be a eth0 in that panel? I remember I had one before, but after I messed with some configuration of VPN, my network became unstable and I remove the Network Manager to try to solve the problem. Since then, there's nothing in my Network Connection window, though I can still connect to my router with eth0. Now even after I reinstalled the Network Manager, I still don't get anything.
View 7 Replies
View Related
Jan 9, 2011
I have an Acer Aspire One D255 netbook with opensuse 11.3 installed and after several painstaking days of tinkering I successfully installed the broadcom wl drivers, and now my wifi card is operational. However, i can connect to my wireless network, but still have no internet access. I have searched the forums and google for a solution but most issues I have found that are similar to mine have been resolved once the wl drivers and firmware where installed
View 2 Replies
View Related
Sep 29, 2010
we got our apache server (running opensuse 11.2) hacked yesterday and I see doing a lsof -i that a bash command using account wwwrun connects all the time to a botnet [URL] and even if I kill it, it reconnects again and again. I've clean the /tmp folder, I've check the crontab but I can't find it.
View 5 Replies
View Related
