OpenSUSE :: Pulseadio Emitting Loads Of System Messages?

Feb 26, 2010

opensuse v11.2, linux

The system messages log show thousands of these messages below. One every 5 seconds. Is this expected? Is there a fix?

Code:
Feb 26 12:12:18 sma-station14l pulseaudio[3214]: ratelimit.c: 15 events suppressed
Feb 26 12:12:23 sma-station14l pulseaudio[3214]: ratelimit.c: 16 events suppressed
Feb 26 12:12:28 sma-station14l pulseaudio[3214]: ratelimit.c: 15 events suppressed
Feb 26 12:12:33 sma-station14l pulseaudio[3214]: ratelimit.c: 16 events suppressed
Feb 26 12:12:38 sma-station14l pulseaudio[3214]: ratelimit.c: 15 events suppressed

View 3 Replies


ADVERTISEMENT

OpenSUSE Multimedia :: Cannot Capture Sound From Line In Input In 11.4 (no Pulseadio)?

May 18, 2011

I have been searching for an answer through most of the recent posts about sound issues but have not been able to find a solution. I am currently unable to capture sound from the "Line" input on my sound card. I do have sound and is working correctly for all applications and I do have P/A disabled (I'm not a huge fan of the sound quality with P/A enabled). I have checked and re-checked many settings but to no avail have not been able to capture sound. I'm sure I may be missing something or have not done something in order for this to work. I was using openSUSE 11.4 on a different pc and had no problems, unfortunately this is a different pc with a different sound card which is on-board so I am not entirely familiar with it yet.

It is a C-media CMI9880 which shows up as a Intel HDA (ICH6) and appears to be configured correctly.

View 9 Replies View Related

Debian Hardware :: USB Serial Adapter Spontaneously Emitting Data Every 20 Secs

Jul 13, 2015

I tried connecting my Debian laptop to a vintage Apple //e using a Super Serial Card on the Apple side and a USB to serial adapter on the laptop side. It kind of works -- I can send data over to the Apple using e.g. echo "foobar" > /dev/ttyUSB0 or via minicom --, but every 20 seconds (quite exactly!) some 4 random characters appear on the Apple's screen (mostly tildes, sometimes a pipe). This does *not* happen when booting the laptop into Debian rescue mode; so I guess it must be some (daemon?) process messing around with the usb serial device in regular intervals.

I tried to disable quite some services, but the problem remains.I don't have any clue how I might catch the evil-doer in the act -- virtually all serial monitors I've so far read about allow only monitoring the interaction of a known program/process with a serial port. But in this case I first have to actually find out which process is talking to the serial port in the first place.

View 4 Replies View Related

Ubuntu :: System After Grub2 But Before Desktop Loads?

Sep 10, 2010

The screen will show a blinking cursor for a few seconds. The keyboard works and a signal is found for the speakers. Then the 'Ubuntu' loading screen will show but at this point the screen would freeze and the keyboard will cease to function. At this point I have to reboot from the on/off switch. It can take several attempts before the desktop will load, or if I'm lucky, it'll load up first time. I've had this problem since 9.10. I'm not quite sure why it's taken me this long to attempt to sort it out.

View 6 Replies View Related

Fedora :: Operating System Freezes After Desktop Loads

Sep 4, 2009

Just recently installed fedora 11 64-bit on my laptop. Everything was fine until today. Everytime I boot up, it crashes right after the desktop loads. Everything is loaded except the area where the running programs are on the taskbar is just one big white block. And a bubble popup says "New SELinux security alert. AVC denial." but everything is frozen. Can't move the cursor or use keyboard. and nothing is happening on the screen. Completly frozen. Anybody have any ideas on what is wrong and how to fix it?

View 3 Replies View Related

Ubuntu Servers :: Reading Htop System Loads With The I7?

Jul 7, 2010

I just built a server, which displays 8 cores in the i7 processor. However, because of the 2 threads per core, it shows up as an 8 core system. When viewing htop, it shows system loads at 0.29,0.18, and 0.13 for respective averaging times. How would I calculate actual system load for this processor? Would I divide the average by 4 or 8? Or, is there another method?

View 7 Replies View Related

Ubuntu :: System Loads Music Player Instead Of Nautilus

Nov 15, 2010

As stated in the subject when I click on partition in Places or try to open a folder e.g. by selecting open containing folder in transmission the system will load music player instead of nautlius. Is this some kind of problem with file associations??

View 6 Replies View Related

General :: File System Loads / Load The Partition?

Aug 27, 2010

my data resides in a partition sda2 - in a logical volume lv_root.unless I'm wrong lv_root contains the information on how to load the partition.so superficially it seems the partition must be loaded bofore we get the info on how to load it.

View 20 Replies View Related

Fedora Hardware :: Diagnose System Lockup - Extremely High Loads?

Dec 23, 2010

Where does one look in terms of diagnostics after a system lockup and hard reset? For example, one of my computers, running Fedora 14 i686, has taken to locking up quite a bit lately. My only way out is a hard reset. Now, once the thing is booted back up I'd like to try to figure out where the problem lies. Where do I look? Will any of the log files reveal anything relevant to me? If so, what sort of things would I be looking for. Keywords?

This same box also locked up when I had Fedora 14 x86_64 installed. I had read that there were some issues with the newer 64 bit kernels that were causing lockups and / or extremely high loads. This is why I switched back to the 32 bit version, 2 days ago to be exact. The box gets little use. It's a toy really and not my main "daily use" computer. It is, however, running folding@home. Maybe that's where the problem is. About 15 minutes ago I called home and had my wife reset the box, then I logged in from work and stopped the folding service. I'll have to see if it locks up without folding running. Folding was running on this box when I had the 64 bit version installed also.

View 3 Replies View Related

OpenSUSE Network :: Web Pages Loads Very Slowly

Mar 16, 2010

I'm using KDE Version 4.4.00 on OS11.2 all my browsers (konqueror, firefox, chrome) webpages loads painfully slowly on vista same connection, same machine is loading is faster. I did not notice this in OS11.1 on same machine.I tried disable IPv6 in boot and in firefox but it did not improve situation significantly. I still get long looking up of dns time after time.Am I "paranoid" or is there some way I can address this this slow loading issue?

View 9 Replies View Related

Fedora :: See All Messages Given Out By Fc12 System?

Feb 19, 2010

I'd like to see all messages given out by my fc12 system. So no graphical interface shows up when I shall type the bootloader-password or log-in with my user.

View 1 Replies View Related

Debian :: Can't Receive System Messages

Mar 2, 2010

I have a small LAN. I am in the process of installing a Debian Lenny/Squeeze system into the LAN. I want to send and receive system messages using rwalld and wall.I can send a system message from my Debian system to another box using rwall. I can send a local message within the Debian box using wall in a console.I cannot send a local message using wall Konsole in KDE 3.5.x. The KDE Write daemon fails to provide any pop-up window./usr/bin/wall is installed from the bsdutils package and is set to -rwxr-sr-x.

The ktalkd package is installed. The KDE control center shows a configuration option in Internet & Network settings called Local Network Chat.When not in X, mesg is set to y at the console. After starting KDE and I open Konsole, mesg is always set to n. I don't know how this setting toggles. Further, setting mesg to y in Konsole has no effect on getting wall to work.mesg is set to y when I run xterm in KDE. Then wall works within that terminal window. However, the KDE Write daemon does not see the message in xterm.When I send a message from another system to the Debian system using rwall, xterm receives the message but not Konsole or the KDE Write daemon.

When I send a wall message from Konsole, xterm receives the message but not Konsole or the KDE Write daemon.I changed TTYPERM in login.defs to 0620 to no avail.I do not have this problem on the non-Debian systems.

View 4 Replies View Related

Red Hat :: Capturing Start Up Messages In System Log

Jul 17, 2010

Is there any way to capture the "[OK]" or "[FAILED]" messages? I would like to know which daemons starts successfully and which ones fails. Any way to tell the system to save those messages in /var/log? I could do CTRL-Print Screen but I would rather not.

View 1 Replies View Related

OpenSUSE Install :: After New Installation, Loads Only Half At Splash?

Dec 8, 2009

this is the 3rd time in 2 days I have installed this OS and its starting to annoy me. I have a Intel Celeron 2.6Ghz with i845 graphic chipset. I have installed 11.2RC2 and after the installation finishes and I reboot, it automatically asks which resolution I want (VESA/VGA). I have to select VESA since the VGA resolutions are HORRIBLY HUGE. When the boot screen comes, it loads halfway and then comes to a crashing halt. I let it load for 2 hours yesterday and it did NOTHING. After turning the computer off and back on, it comes to a screen to load normally or into failsafe. If I choose normal mode it does the same, if I choose failsafe, it does the same. So basically I have an OS I can't reach. If I could, I would give an xorg.conf on here, but I can't even get anywhere to produce one! When I put the live CD in, it boots perfectly, but I have to install again, only to get a OS that wont boot yet AGAIN.

View 8 Replies View Related

Debian Configuration :: Can't Receive System Messages

Mar 2, 2010

I have a small LAN. I am in the process of installing a Debian Lenny/Squeeze system into the LAN. I want to send and receive system messages using rwalld and wall.I can send a system message from my Debian system to another box using rwall. I can send a local message within the Debian box using wall in a console.I cannot send a local message using wall Konsole in KDE 3.5.x. The KDE Write daemon fails to provide any pop-up window./usr/bin/wall is installed from the bsdutils package and is set to -rwxr-sr-x.

The ktalkd package is installed. The KDE control center shows a configuration option in Internet & Network settings called Local Network Chat.When not in X, mesg is set to y at the console. After starting KDE and I open Konsole, mesg is always set to n. I don't know how this setting toggles. Further, setting mesg to y in Konsole has no effect on getting wall to work.mesg is set to y when I run xterm in KDE. Then wall works within that terminal window. However, the KDE Write daemon does not see the message in xterm.When I send a message from another system to the Debian system using rwall, xterm receives the message but not Konsole or the KDE Write daemon.

View 3 Replies View Related

OpenSUSE Install :: 11.2 Loads Debug Kernel Not Default / Change It?

Dec 23, 2009

Recently, I upgraded 11.1 to 11.2. Everything seemed to go fine. However, for some reason the system boots with the debug kernel - 2.6.31.5-0.1-debug. According to Yast every kernel under the sun seems to be loaded on the system. Grub, however, gives two choices - one for the regular and one for the failsafe system. They both boot to the debug kernel.

How do I get this thing to load into the regular, as opposed to the debug, kernel?

View 5 Replies View Related

OpenSUSE Install :: Restarts In Loads Suse And Then Goes To A Black Screen?

Mar 20, 2011

I'm installing OpenSuse 11.4 to a HP DL180 G6 server, with no luck. I go through the installation process when booting up from the DVD, and when it finish and restarts in loads Suse and then goes to a black screen and doesn't respond.

View 9 Replies View Related

OpenSUSE Install :: Start A PXE Installation - The PXE Bootsystem Loads The Kernel

Mar 31, 2011

If I do try to start a PXE Installation, the PXE Bootsystem loads the kernel, and
I guess it trys to start to load the initrd, but then it froze, i need to reset the computer. On the TFTP Server (aftp) I see that it trys to resend the initrd files and runs into a time out.

Ive the problem on 2 maschines, both with the same Motherboard (ASUS M4N78).

And the PXEinstallation of OpenSuSE 11.3 works fine, without any problems.

View 1 Replies View Related

Fedora :: Noisy Network Manager - Tell To Not Log So Many Messages To The System Log?

Mar 23, 2010

Is there anyway to tell NetworkManager to not log so many messages to the system log? There appears to be a bazillion <info> messages in the log file (/var/log/messages). It makes it hard to find any potential problem areas...

View 1 Replies View Related

Fedora :: Remove Boot Messages In System Tray?

May 28, 2010

Every time I log in, I get a "Boot Messages" indicator in my notification area. I click it and it shows me what happened during boot (uneventful, no error messages). I would like to remove this icon, it's very annoying. I can right click it and click quit but I don't like doing this every time I log in.

Is there an easy way to stop it from starting up (I couldn't find it in Startup Applications)?

View 9 Replies View Related

Server :: Error Messages For System And Hardware Failures?

Aug 4, 2010

I need to scrape logfiles and do some pattern matching for a series of hardware and system faults;

For example:
Network interface down / up
IO errors
Out of Inodes
Out of Diskspace
Memory Errors
Power Failure

When the appropriate Strings appear in the log (assuming /var/logs/messages)Then a trap will be sent. (Customer specific SNMP solution) So what I need (I think) is a list of the strings I need to match.Has anybody any idea where I can find a list of strings which will definitely appear in the log - RHEL5 ?

View 1 Replies View Related

Server :: Prevent Samba Logging System Messages?

Mar 15, 2010

I�m looking into preventing the samba messages from appearing in the system log (/var/log/messages).I added syslog = 0 to smb.conf and reloaded the config but messages are still appearing�suppress logging or reconfiguremba such that the �nmbd� and �winbindd� messages do not appear in /var/log/messages

View 4 Replies View Related

General :: Centralized Location For Operating System Error Messages?

Jul 20, 2010

the thing that tends to draw out their frustrations the most are the error messages.

Things like "x.x not found, such and such can't continue" or "Unable to locate x.x", etc.

Well, of those people as I described above, a lot of them are fiercely independent people and would fix their own problems had they any idea what they were.

So, I had a thought that adding google or LQ.o search terms to the error messages, along with a link to the search feature, would be somewhat beneficial.

Perhaps with messages regarding missing files, then provide a link and message "To correct this issue, copy filename and submit it here -> url and download the package"

So I was wondering where I could find lots and lots of error message code.

View 3 Replies View Related

Software :: System Date / Time Change Not Reflect On Log Messages

Jun 29, 2010

I have the application and kernel module running on my system. In the meantime, I am changing the date and time of the system. However, this change doesn't reflect on log messages of the application that's being executed.

View 5 Replies View Related

Programming :: Logging Messages From Program Doesn't Reach /var/log/messages?

Jul 13, 2011

I have a syslog-ng running and kernel build of 2.6.34.8 I use a syslog API in my program with facility LOG_LOCAL5 and and levels debug err and crit and info. when I ran on the older syslog facility I had everything logged fine as I intended. now I have written these rules into the syslog-ng.conf:

options {
flush_lines (0);
time_reopen (10);
log_fifo_size (1000);

[code]....

the last two rules show my program gnssapp. the result is all debug levels or crit or err levels I don't see any of them !

View 3 Replies View Related

OpenSUSE :: Saving Messages With Knode

Jan 30, 2010

I have used knode for nntp browsing ever since I settled on openSUSE a few years back. I have a reasonably large collection of useful messages stored in local folders so that I don't lose access to them as knode expires and drops them from the original groups. Testing out the KDE4 version of knode I find that I am no longer able to drag/drop the messages I want to keep to the local folders - in fact, I can see no obvious way to get them there.

Am I just missing an obvious setting or has this feature gone away? Loss of
it would be a show stopper for me.

View 4 Replies View Related

OpenSUSE :: PackageKit Messages On The Terminals?

Mar 14, 2010

I always get messages like those below in my terminals, that obfuscate my typing.

How can I get rid of them (updated opensuse 11.2)?

I already reconfigured syslog to move PackageKit messags to a separate file (because the messages appeared in /var/log/messages too, and I hoped that was the source).

I'm ok with seeing severe error messages on the console, but not spam like PackageKit started..., stopped...

Message from syslogd@job5 at Mar 14 00:29:46 ...
PackageKit: what-provides transaction /1130_cceaeeed_data from uid 1000 finished with success after 5203ms
Message from syslogd@job5 at Mar 14 00:30:06 ...
PackageKit: daemon quit

[Code]....

View 1 Replies View Related

OpenSUSE :: Change_hat Kernel Messages?

Dec 17, 2010

on a SuSE-11.3 (xen domU) I repeatedly notice the following messages:

Dec 17 19:30:01 MTW kernel: [22484.319192] type=1503 audit(1292610601.862:84): operation="change_hat" info="unconfined" error=-1 pid=22001
Dec 17 19:30:01 MTW kernel: [22484.319222] type=1503 audit(1292610601.862:85): operation="change_hat" info="unconfined" error=-1 pid=22001
Dec 17 19:45:01 MTW kernel: [23384.365597] type=1503 audit(1292611501.910:86): operation="change_hat" info="unconfined" error=-1 pid=22702

[code]...

View 7 Replies View Related

OpenSUSE :: KMail Download Old Messages?

Mar 27, 2011

how to make KMail download all messages, new and old?

I have an email client on my android phone as well as KMail on this computer. Its important for me to be able to see all my old messages for reference.

View 4 Replies View Related

OpenSUSE :: Web - Screen Loads And After Initial First Few Lines Breaks Up Into Multiple Repetitions Of Lines

Apr 22, 2011

I have been experiencing a problem where the screen loads and after initial first few lines breaks up into multiple repetitions of lines. Reloading helps but has to be repeated when pageing down. Mail is no problem; it is supplied by my network provider. OS is openSUSE 11.2 which I update when advised. Below is a sample from the error console:

[Code]...

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved