I have a 11.1 NFS server and several 11.1 NFS clients. If for some reason the server shuts down before the clients then the clients become almost frozen, particularly KDE is rendered useless even after cycling back to init 3 then init 5. I would like to make the clients immune to shutdowns on the server.
View 3 RepliesHave a pureftp server on OpenSuse 11.2 (x86-64 bit), KDE 4.3.5, dual core AMD. It responds to ftp clients on another machine (openSuse 11.1) within the same subnet (192.168....) and delivers lists of directories, changes directories, etc. The clients (gftp, jftp, filezilla, dolphin--tried them all) are unable to upload to the server (after a successful log-in on the server as a user, not root) with an error message that seems to indicate an inability to open the file on the client machine. Also logged in as user on the client machine. From FileZilla:
Command:STOR FCtinyLogo2.jpg
Response:553-Can't open that file: Permission denied
Response:553 Rename/move failure: No such file or directory
What am I missing in permissions? The directory where the JPG is located belongs to the user who is signed in, its in his home directory. The users on the two machines are not the same.
I have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies View Relateduntil 2 weeks ago I had o.S11.3 on both my Siemens and Asus laptops. I have installed NX No Machine. ( I know it's not open source,I am using the free version). With commandline ( root) /usr/NX/bin/nxclient I was able to connect to the other machines. I got Qt: Locales not supported on X server, the NX menu popped up and I was able to connect by inserting resp codes. After fresh install of o.S.11.4 on the ASUS the commandline (root) answers:
xlib: connection to":0.0" refused by server
xlib: No protocol specified
nxclient: cannot connect to X server:0.0
The ASUS can still be reached from the other machines (one with o.S.11.3,the third one with o.S.11.2 ) SSH ( Lan)connections are all working forth and back between the machines, even to and from Win XP, however only from Win 7 on the ASUS, but that's a Win7problem. Comparing the installed xorg-x11- server-extra : on o.S. 11.3 Additional X servers ( Xmdx,Xephir,Xnest,Xvfb ) ,on o.S.11.4 the Xvfb is missing, might that be the reason?
So a while back I was able to mount a directory from my OpenSuse server as a NFS on an Esxi server. After restarting the Esxi server, the NFS became inactive and I was unable to remount it. The error given was that the Esxi client was unable to connect to the Suse server. I was looking into the showmount -a command on the Suse server and it showed the mount point on the Esxi server. Could this be causing the Suse server to reject new attempts to mount the directory? What else can I try to fix this problem? Also I should note that both servers can ping each other.
View 2 Replies View RelatedBackground:I have a small PC104 running opensuse 11.1. I'm writing a small client/server application for debugging purposes using mono and WCF. All the client does is make a request for information every 100ms.Problem:After about 20 requests the server quits responding to the client. Even if the client is running on the same machine. I've run the exact code on another laptop running opensuse as well as a laptop running windows and everything works great. Hopefully that closes the option that it is a code, mono, or opensuse flaw.Is there a kernel option or a network option that anyone knows about that might cause this sort of behavior?
View 3 Replies View RelatedI setup an ssh server that works fine when using the terminal, but trying to run programs like firefox fails. It will open partially and then simply hang. Less complicated programs can open successfully and run fine, but cause my remote computer to pause every 5 seconds for about a second.
View 9 Replies View RelatedI want to set up the following server in open suse:dhcpopenldapnfs (to allow users to mount their home directories from the serverI started off with the openldap server. I configured it with dc=localdomain,dc=local as its domain. As the server machine has no internet. Though when I go to add a .ldif file with the following command
Code:
ldapadd -x -D 'cn=Administrator,dc=localdomain,dc=local' -f /home/base.ldif -W
It returns this
[code]....
I have installed a working DNS server on my home network. I have an unique server, devoted to dns, gateway, storage which runs opensuse 11.0 (I known that it is rather old). Two new clients require DHCP. I have installed, using yast, a very simple DHCP server, according to the following config:
option domain-name "XXX.XXX";
option domain-name-servers 192.168.0.1;
option routers 192.168.0.1;
[code]...
(I have tried to add "ddns-update-style none", and to remove the ntp-servers option, since my server is not a time server, without success). Unfortunately, even if the client (a mac running OSX 10.4) receives a right IP and gateway address, it displays neither dns server address nor default domain name. The same mac, on my office network (not managed by me), receives everything.
I set up a Samba server on my openSuSE 11.2 machine and I can connect to it locally with the local ip and with my actuall ip. My friend however cannot. I tried to have him ping my ip and that wouldn't even work. I'm confused and wondering why it doesn't work. We share a lot of files and this would make both of our lives much easier.
View 9 Replies View RelatedI have one machine (out of a couple dozen) that continues to refuse to allow "vncserver :1" to start. It is perfectly happy with :2 - :9 but tells me :1 is already running - yet ps tells me that there is no running
Xvnc instance.
What have I done here and how do I get that session back? I've cleared the /tmp/.X11-unix entries but that did no good. Could I have checked something in Yast that is launching an invisible session?
i have a suse 11.3 machine and i cannot set it to be a NFS server that is i cannot mount a directory of this machine on another one running as well a 11.3 while i can mount without problem a directory from 10.0.i do not know where to start as the NFS server option seems to have vanished from YAST.
View 5 Replies View RelatedI have x11 forwarding enabled in /etc/ssh/sshd_config on a suse 11.2 32 bit box running kde I can open x apps on a windows machine using xming and putty just fine, but when I boot the same machine into suse 11.2 64 bit using kde and try using konsole I get: cannot connect to x server
The command I'm using to log in is: ssh -X -l username host I doubt the problem is with the server I'm logging into or it wouldn't work in windows, not really sure what to look for as I've never had a problem using x11 forwarding from a linux client before only windows ones
I have an Ubuntu-based fileserver, which I have set up and works fine for 5 computers (Windows & Linux based). I have one computer, on Windows, which when I map as a network drive it works and I can transfer small files using the USB adapter. However, when copying over a large file, after 2 mins or so it comes up with the error "Specified network name cannot be found". However when plugged in using Ethernet, it will work fine.
What is even stranger is when I set it up as an FTP server rather than SAMBA, it will happily transfer a 4gb file on the USB adapter, which possibly knocks out driver issues (I have tried 2 different drivers, am currently using Linksys one from website - WUSB300N) AND perhaps the issue lies on the Linux server side with setting up the SAMBA server? However I do have another one of these adapters that works fine, but it is on WIN XP HOME with a custom network logon script (as HOME won't remember passwords after restart). BUT it does work on another computer with XP PRO as network place, so I tried network place on this one, and it still doesn't work.......
Cisco vpn client would freeze the system. The only way to recover is to do a hard reset. The funny thing is I had it working before, so it may be random. However, it just happened 3 times in a row and I haven't tried again. I'll try again tonight. I'm pretty sure I'm running the latest client for 64bit linux systems. I'll confirm that when I get a chance, as well as my kernel.
View 7 Replies View Relatedi am using mobile broadband to connect with network after i connecting mb.it drops it's connection for every 10 minutes.i need to restart to reconnect it.it is happening in kde.
View 5 Replies View RelatedInstalled openSUSE 11.3 over an existing 'very stable' 11.2 installation and started experiencing wireless connectivity issues immediately. Network Manager would show connected 100% - 92% but I would lose connectivity to mail, browser and messenger(s). This disconnect would last less than 30 secs but would occur every 2 to 4 minutes.
dmesg reported:
[ 3663.672098] iwl3945 0000:03:00.0: Failed to get channel info for channel 3 [1]
[ 3664.101085] iwl3945 0000:03:00.0: Failed to get channel info for channel 3 [1]
[ 3664.529050] iwl3945 0000:03:00.0: Failed to get channel info for channel 3 [1]
BTW Channel 3 is the channel my wifi is broadcasting on. I've tried other channels and other computers and it is only openSUSE 11.3 having an issue. I am also using WPA2. Modifying the Global Options in Network Settings from User Controlled with NetworkManager to Traditional Method with ifup seemed to stabilize most of the issues, but I do notice occasional drops. I've also switched from Network Manager to wicd to provide some UI while dealing with this issue. Since iwl3945 drivers are now in the kernel I don't know if I should try to revert to an older driver or if there is another issue.
In a newly installed Linux machine which is a client machine, is not listening to NIS domain server even after setting IP address ,default gateway,and subnet mask.What are all the changes to be done in configuration file.And how can be solved
View 2 Replies View RelatedI have 3 boxes running opensuse-11.4 64 bit - Phenom-I 2.6 GHz, Intel Q9400 quad core 2.66 GHz and Intel SU7300 dual core 1.3 GHz (the last one is a laptop). When I run a KVM virtual machine and load it quite a lot all host OS freeze. Interestingly, the laptop works the longest (hours), while the fastest system with Q9400 freezes in max. 10 minutes. After a hard reboot there is nothing in /var/log/messages This bug is 100% reproducible. The guest OS is either RHEL or openSUSE. Is it a 11.4 bug or I am missing something? Have not tried the same hardware with RHEL-6.
View 1 Replies View Relatedi have installed nfs server on my redhat machine.when i want to mount shared data from client(suse)machine the following error occur. "mount.nfs: mount to NFS server '10.3.31.146:/home/usbtest' failed: System Error: No route to host" both machines ping each other successfully.
View 1 Replies View RelatedI'd like to access a samba/SSH server which itself is connected to a VPN Server, therefore acting as a VPN Client. As soon as the VPN Connection is established, samba and ssh connections to this VPN Client get a timeout. But not all of them.
To get a better understanding I made an overview. The first one is a general network overview, without any VPN Connection, the second one with the VPN Connection established.
Network Overview without VPN
I can access the server in several ways:
*From the router via ssh (router runs ipcop with busybox)
*From the laptop via ssh (putty via Windows 7)
*From the laptop via samba
*From the internet via ssh (port forwarding to the ssh server)
Everything is working as it should.
Now the server that runs ssh and samba service connects to a VPN Server on the Internet, this is also working fine. Now it gets weird. The only samba/SSH connection that is still working is ssh directly from the router to the server. Everything else gets a timeout:
*From the laptop via ssh (putty via Windows 7)
*From the laptop via samba
*From the internet via ssh (port forwarding to the ssh server)
Network Overview with VPN active
Why is that? It seems from the little understanding I have of vpn and networking, that incoming packages (like samba request from the laptop) don't get send directly back over eth0 but over the vpn connection. This seems somewhat logic, BUT ssh from the router is still working. Why from the router and not from the laptop? I really can't get my head around it.
Configuration Overview
tldr; One Client acts as VPN Client and samba/SSH Server. As soon as the VPN Connection is established samba/SSH stop working, but only partially.
i hav configure dhcp server. but the ip is not getting assigned to my client machine.
View 3 Replies View RelatedI have set samba domain. I am able to add win 7 and xp clients. All r working fine. But I have a doubt. If I shutdown the samba pdc server, I should be able to login the client machine with the same profile (which I had, when the samba pdc server was up). Now , if I shutdown the sambapdc, I am able to login the client machine, but new profile is being created. How to avoid this.
How to say to samba that the client machine should load the same profile which was created when the server was up and running. I do not want the client machines to create new a profile when the server is down bcoz in windows domain, when the windows domain is shutdown, the client machines are able to login with the same profile (the profile which was created when the domain was up). I wish to have same thing in samba pdc also.
I have configured LDAP Server on RHEL 5.2 successfully and client can login to the server. But I do no how a client can change its LDAP password on his client machine.
View 5 Replies View RelatedI'm working with OpenSusse 11.2. I installed and activated the NFS server via yast2. I exported the relevant directory via yast2 (NFS server configurastion)
I'm trying to setup my Linux target to boot via NFS. The kernel boots up but fails to mount the file system. When looking on a capture from ethereal it can be found that the NFS server return error when client try to mount the /nfstest directory from this server. The returned error is 13
serverip: 192.168.56.130
targetip: 192.168.20.180
gateway: 192.168.20.101
[Code].....
I tried Ubuntu, Kubuntu and now Xubuntu, all 11.04. I've also tried Deluge, Transmission and Ktorrent. With 10.10 everything worked fine (all variants). Also, in Windows 7 it's working fine. But now it drives me crazy. As soon as I start a torrent, the download starts but after 30 seconds or so the download drops to a zero. Also, I'm not able to browse anymore. The networkmanager tells me I still have a connection.
Some say it has something to do with the number of peers the client connects to, or it's my router. My router isn't the problem, as it's working fine with 10.10 and windows. So maybe it's the number of peers right? Question. Why can I connect with over 200 peers at the same time while I'm using 10.10 or windows, but can't do it with 11.04? Better put, what should I do to get this working fine again? Going back to 10.10?
I have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface
View 2 Replies View RelatedI recently ran into a problem with my at&t vpn connection. I'm hoping someone in this forums may be able to help? It's been working beautifully then one day it just wouldn't connect. I'm wondering if AT&T may have something to do with this...? I have tried reinstalling agnclient-1.0-2.0.1.3000.i386.rpm and agnSUSE10Prep-1.0-2.i386.rpm but nothing seem to work.I'm running Linux 2.6.31.12-0.1-desktop i686System: openSUSE 11.2 (i586)KDE: 4.3.5 (KDE 4.3.5) "release 0"
View 2 Replies View RelatedThis is a thread I've moved over from the install forum and is hopefully more focused. Sorry if I have violated some protocol. Problem I have a new machine build configured to dual-boot Windows 7 and OPENSUSE 11.4. Network performance in Windows is very good but network performance in OPENSUSE is very poor.
[Code]...
I installed OpenSuSE 11.3. The only "extra" package I put in after the install was VirtualBox-ose. The firewall is disabled. I gave the machine a static IP address. I can get to the Internet from the machine. I enabled sshd to start on boot with "chkconfig sshd on" and also verified the service is running on the machine. I can ssh user@localhost from the machine as well.
When I try to connect to SSH from another machine, I get a connection refused. I verify that the firewall is down. I also try to get to VNC -- same problem: Connection refused. I ping the machine for fun. If I try to SSH again, it sometimes gives me a logon? I would check the server logs for the connection refused, but I wouldn't know where to look. I started in /var/log/messages, but nothing seemed to jump out there. I also find it strange because I can RDP to a windows guest running under VirtualBox. The Windows guest uses Bridged Network and DHCP.
I also find it interesting that I sometimes type a "ping google.com" from the 11.3 box and it will just hang - no output. Then I open firefox and get to the internet. All of a sudden, ping starts to give output. Could this be a neetwork card issue? A configuration issue? I don't know where to start.