OpenSUSE Network :: Ssh Through A VPN Internet Client?
Jul 2, 2011
I have an obstacle to login remotely to my server. When I used DHCP internet connection, I simply worked with the ssh (scp) commands without any problem. Now, however, I need to use the VPN client to access to internet. After I log on by VPN, I can use the Firefox browser, but the ssh (scp) commands do not work at all from the command prompt. It looks that ssh does not go through the VPN client. I have tried putty.exe with wine, but that also does not work.
View 1 Replies
ADVERTISEMENT
May 20, 2009
I have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface
View 2 Replies
View Related
May 12, 2011
I have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies
View Related
Oct 27, 2010
I've searched the forums (250 thread limit) for a fix on this, but all the questions seem unanswered or unrelated. My situation is this: I'm running Ubuntu x64 10.10 'Maverick'. I have a cablemodem connection for my Internet access. I have home network running on DD-WRT with the dreadful Linksys WRT54G series router.
My DD-WRT router is 192.168.1.1, subnet 255.255.255.0.
My Linux box is 192.168.1.61, subnet 255.255.255.0.
I have a VyprVPN connection set up successfully on Linux. Mostly everything works great, speed's fine, latency is what I expect it to be. Except... I also run an SSH server to remotely admin the box at port 22, an Apache server running over SSL at port 7001, and a Transmission web client at port 7002 (only secured by basic HTTP realms auth). All of these things worked before I got the VPN working, I'm of course using NAT at the DD-WRT router.
The endresult I am looking for, is to have the security and protection of the VPN (even if it's only perceived) for everything I do on this machine -- EXCEPT on Apache, the Transmission web panel, and the SSH server, which I want to access from the outside world. I have no firewalls running or configured, not even iptables, not even the SPI firewall on DD-WRT. All connections to the aforementioned services from the outside world timeout coming in to the Linux box. They all work from inside my home network (182.168.1.0/24). In case it's needed, he's my routing:
[Code]....
View 2 Replies
View Related
Mar 1, 2010
I recently ran into a problem with my at&t vpn connection. I'm hoping someone in this forums may be able to help? It's been working beautifully then one day it just wouldn't connect. I'm wondering if AT&T may have something to do with this...? I have tried reinstalling agnclient-1.0-2.0.1.3000.i386.rpm and agnSUSE10Prep-1.0-2.i386.rpm but nothing seem to work.I'm running Linux 2.6.31.12-0.1-desktop i686System: openSUSE 11.2 (i586)KDE: 4.3.5 (KDE 4.3.5) "release 0"
View 2 Replies
View Related
Dec 15, 2010
The putty connection is ok, FTP also. Apache is on. Could be something at the firewall?I am trying with the IP and a directory at lampp/htdocs.
View 3 Replies
View Related
May 10, 2011
Trying to install the Novell iprint client but got the following error message:
My system specifications are as follows:
View 6 Replies
View Related
Jul 5, 2011
OpenSuse 11.4 Asus Netbook 1000H Following other members in the forums I have installed Opensuse 11.4 on the Netbook. In the early days Ubuntu Netbook Remix worked well for me. But this has been discarded, and the "one size fits all" Ubuntu had become slow and cumbersome. So..... onto my post. Opensuse is working well. The install went beautifully.
It detected the Wireless Internet and I am able to get on line. I also need to share the Internet connection to a desktop. This is done via a small network switch. Thus far I cannot do this. I tried to use ifup to configure a static ip but this busted my Wireless configuration. I went back to knetwork manager. Then I tried to set up the wired network using knetwork manager and under IPV4 "share" the connection. But this blanks out any possiblity of a static address and substitutes dhcp. My desktop cannot ping the this dhcp address. Ubuntu had this thing called Firestarter? - from memory. This configured the system to sharing the network.
View 7 Replies
View Related
Oct 7, 2010
I'm trying to set up an openSUSE 11.2 host as NIS client and I would like to knowwhether or not it can be client of two (or more) NIS domains. The reason is thatsome users are authenticated on server1 (nis-domain1) and some others on server2(nis-domain2).Trawling the web, I found a HP document stating that a client can belong to one NIS domain only. However, the yast NIS client interface allows adding NIS domains/servers to the seemingly default one. I'm totally confused.I made the following experiment:1. declaring nis-domain1 in /etc/defaultdomain and server1 in /etc/yp.conf: ypwhich returns server1, ypcat passwd lists the users on server1.2. in the yast interface, I added nis-domain2 and server2; in /etc/yp.conf, there is an extra line "domain nis-domain2 server server2". After reboot, ypwhichreturns server2, ypcat passwd lists the users on server2. But now the maps from server1 are no longer available.
View 4 Replies
View Related
Apr 12, 2010
I installed Suse 11.2 on clean HD. I cannot connect to the internet. Seems like Suse didn't install drivers for on board ethernet card. It is a Marvell Yukon 88E8056. I'm new to this and don't know how to install the drivers.
View 3 Replies
View Related
Sep 10, 2011
I have SUSE 11.0 set up to act as a router/firewall for my home network to the internet through a cable modem attached to an Ethernet card. When I was laid off several years back, I found information that let me connect my network to an ISP via a standard serial modem. I am considering going to the Sprint U1901 4G USB modem and dropping cable internet. Sprint claims the U1901 is Linux compatible. My thoughts are that using the 4G modem should be similar to the old dialup modem. I had a script that connected to the internet whenever internet traffic was detected. Unfortunately, I did not save notes on what I had done to setup the modem to dial automatically, and I have been unable to locate information that seems good to set this up again. I already know that all I had to do to get routing working was simply replace the internet port in the firewall/routing script with the port for the modem. So I assume that is rather trivial.
Would you please point me to a doc, perhaps SuSE specific, that gives reasonable directions on how to set up a "dial on demand" ISP connection? I assume that the 4G modem will be very similar to my old serial modem so that a dial on demand script will work. I did find a dial on demand howto, however, it did not seem to apply.
View 3 Replies
View Related
Mar 19, 2010
I'm looking for information on how to use a single FTP command from the terminal window, that would do this:
- Login (with usesrname/password)
- Set Transfer type to Binary
- Get all files in a directory and download somewhere.
- Delete all files in the directory that was just downloaded.
- Close Connection when complete.
There lots of information on individual commands, but I want to combine them into one single command that requires no human interaction. Just one big line Hopefully from this one command line I'll be able to create more for other purposes (like login and delete one file then close).
View 9 Replies
View Related
May 7, 2010
We would like to use Kiwi LTSP to boot some old PCs straight in to a Windows terminal session. We have this working with RDesktop, but we would like to load balance the connections to our Citrix servers, which I don't believe you can do with RDesktop as it points to a single Windows server.
Is there a way to get LTSP to connect to published ICA applications on boot in a similar way to specifying screen07=rdesktop in lts.conf?
View 2 Replies
View Related
May 22, 2011
until 2 weeks ago I had o.S11.3 on both my Siemens and Asus laptops. I have installed NX No Machine. ( I know it's not open source,I am using the free version). With commandline ( root) /usr/NX/bin/nxclient I was able to connect to the other machines. I got Qt: Locales not supported on X server, the NX menu popped up and I was able to connect by inserting resp codes. After fresh install of o.S.11.4 on the ASUS the commandline (root) answers:
xlib: connection to":0.0" refused by server
xlib: No protocol specified
nxclient: cannot connect to X server:0.0
The ASUS can still be reached from the other machines (one with o.S.11.3,the third one with o.S.11.2 ) SSH ( Lan)connections are all working forth and back between the machines, even to and from Win XP, however only from Win 7 on the ASUS, but that's a Win7problem. Comparing the installed xorg-x11- server-extra : on o.S. 11.3 Additional X servers ( Xmdx,Xephir,Xnest,Xvfb ) ,on o.S.11.4 the Xvfb is missing, might that be the reason?
View 1 Replies
View Related
Jun 25, 2010
In short: browsing the internet with domain names does not work. The long version: I've configured my network with DHCP and ifup. Ping works on my internal net and with servers in the internet. Dig work's too! I get the right IP to the requested domain. When i try to access the internet using firefox or even wget i get an DNS error. For example wget is showing the following error: Resolving heise.de... failed: Name or service not known. wget: unable to resolve host address 'heise.de'
Again dig show me the right IP and if i add the entry to /etc/hosts it work's too! I've even tried it with manually setup of ip address, nameserver and default gateway but with the same result. Switching off the firewall has no effect on this problem, too.
View 9 Replies
View Related
Jan 28, 2010
So a while back I was able to mount a directory from my OpenSuse server as a NFS on an Esxi server. After restarting the Esxi server, the NFS became inactive and I was unable to remount it. The error given was that the Esxi client was unable to connect to the Suse server. I was looking into the showmount -a command on the Suse server and it showed the mount point on the Esxi server. Could this be causing the Suse server to reject new attempts to mount the directory? What else can I try to fix this problem? Also I should note that both servers can ping each other.
View 2 Replies
View Related
Apr 28, 2010
I am installed Opensuse 11.2 and maked all configurations and installations for Mail Server Yast. ( Postfix, Ldap ) In ldapadmin what class objects i need insert to configure e-mail client ? I am choised for test suseMailAccess and in suseMailClient inserted my e-mail and what i insert in suseMailAction ? Anyhere know howto install and configure this service ?
View 5 Replies
View Related
Aug 18, 2010
I'd like to have my Samba client update Windows DNS then join in domain. Computer join in domain but DNS not update.
OS: OpenSUSE 11.3
Try after join in domain:
net ads dns register -d 3
[2010/08/18 20:47:17, 3] param/loadparm.c:9158(lp_load_ex)
lp_load_ex: refreshing parameters
[2010/08/18 20:47:17, 3] param/loadparm.c:4929(init_globals)
Initialising global parameters
[2010/08/18 20:47:17, 2] param/loadparm.c:4788(max_open_files)
rlimit_max: rlimit_max (1024) below minimum Windows limit (16384)
[2010/08/18 20:47:17.871064, 3] ../lib/util/params.c:550(pm_process)
params.cm_process() - Processing configuration file "/etc/samba/smb.conf"
[2010/08/18 20:47:17.874091, 3] param/loadparm.c:7842(do_section)
Processing section "[global]" .....
Windows Workstation update DNS this domain. DNS mydomain.ru resolved.
View 1 Replies
View Related
Oct 5, 2010
I recently donwloaded boinc and every time I launch I get this error "cannot connect to core client." I went through the guides and opened port 31416 in external zone, am I doing this right? The guide said to put it in the DMZ, what's the difference?
View 3 Replies
View Related
Dec 27, 2010
Background:I have a small PC104 running opensuse 11.1. I'm writing a small client/server application for debugging purposes using mono and WCF. All the client does is make a request for information every 100ms.Problem:After about 20 requests the server quits responding to the client. Even if the client is running on the same machine. I've run the exact code on another laptop running opensuse as well as a laptop running windows and everything works great. Hopefully that closes the option that it is a code, mono, or opensuse flaw.Is there a kernel option or a network option that anyone knows about that might cause this sort of behavior?
View 3 Replies
View Related
Jan 5, 2011
After connecting to any host, the openssh client hangs after I type the password. The strange part is, it only hangs if when I use the wlan card. If I connect my phone to the computer and uses it to connect to my server, it works 100%.
If I use any other computer at the wireless network, it works 100%
If I use putty on the same machine, it works 100%
It is only a problem when I use the build-in wireless card, under openSuSE 11.3, on my Lenovo L512. (note that everything besides ssh works completely).
View 4 Replies
View Related
Jan 22, 2011
I setup an ssh server that works fine when using the terminal, but trying to run programs like firefox fails. It will open partially and then simply hang. Less complicated programs can open successfully and run fine, but cause my remote computer to pause every 5 seconds for about a second.
View 9 Replies
View Related
Jan 30, 2011
I just performed a fresh installation of openSUSE 11.3 and ISPConfig 3 on my server. I read through the article "The Perfect Server - openSUSE 11.3 x86_64 [ISPConfig 3]" and followed the instructions closely. Everything went smoothly.
I went into ISPConfig 3 and set up a DNS zone, email mailbox, FTP client, and website all for a client I created, hoping to use the client as the main account for a web site I want to host on my server. After I finished with this, I logged onto the server through FileZilla using my newly created client's information. It took me to the "main directory" with the folders cgi-bin, log, ssl, tmp, and web. When I open "web" I see an html file named "index.html."
I tried loading a mock website into the folder, also with an index.html file, and the files transferred over properly except the mock index.html file. The program changed the name to index.html.1. I tried to delete the original index.html file but was not allowed to. I then tried to rename it to something other than index.html and kept receiving a 550 Rename/move failure message. Can anyone point me in the right direction or help me resolve this issue?
I'm thinking perhaps I don't have the right permissions with the client to rename files, but since that's the account I want as the "owner" of this web site, I need to change the permissions so I can. I tried changing the ISPConfig 3 "Limits" for the account to SSH-Chroot Options "NONE" thinking that might be the issue.
View 3 Replies
View Related
Aug 9, 2011
This issue has appeared at least twice in the past few years, for Ver. 10 and 11, but I've not seen any answer other than a suggestion to file a bug report.
The NFS client, on 11.4, returns an unspecified error when started from System Runlevel:
YaST got signal 11 at YCP file Service.ycp:77
/sbin/yast2: line 423: 19958 Segmentation fault $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS
Is this client not compatible with the wide screen format on my notebook?
overnight break Left both machines running at the end of the day. This morning, Runlevel can stop and restart NFS client with no problem. The remote directory shows up in the client's Dolphin and is the correct size and content. In the medical field they call this spontaneous remission. Hope it works for you too.
View 2 Replies
View Related
Jan 5, 2011
I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP
View 8 Replies
View Related
Feb 25, 2011
I'm on opensuse 11.4 (11.3 won't work with my monitor).
My computer gets internet through wireless and I want to share that internet through its ethernet port. So far I've tried using Knetworkmanager to create a network bridge between my wireless and wired connections. I created a new wired connection and shared it using the ip address settings. I was able to get both connections active, but the device hooked up via ethernet had no internet connectivity.
I also tried this command:
echo 1 > /proc/sys/net/ipv4/ip_forward
but another test resulted in the same fashion (no internet on wired). I believe anything I add to /proc should have an immediate effect, correct?
View 9 Replies
View Related
Feb 9, 2010
I have a desktop computer running OpenSUSE 11.2 with two network cards installed. I would like to use both cards for connecting to the internet using different networks. The setting would be the following: eth0 is the main (default) card, almost all programs should use this NIC for connecting to the internet. eth1 is used only by a few programs, which have setting for selecting which network interface to use. The two NIC's are connected to different networks, so the IP address of the NIC's, the related subnet masks and gateways are also different.
Saying short, I would like to have the two NIC's as they would be in two separate computers. I can set the IP address and subnet mask of the NIC's. The main problem is that I can only declare one gateway. How can i setup this? I do not use network manager, I configure network cards using yast, but if needed I can of course use ifconfig directly.
View 9 Replies
View Related
Jul 30, 2010
I'm having a strange problem with my network connection/DNS. I turn computer the on and it recognizes and connects to wireless or wired but I can't access any Internet resources or my router. If I ping the default gateway, I get no response and I get DNS errors from any network services that run at start up. If I stop and start the network daemon then it all works fine until the next time I turn on my laptop. It does this for both wireless and wired connection.
I've tried to edit the network interface information in YaST but it says that configuration is handled by knetworkmanager and I have no idea where that information is accessed. I should point out that it all worked fine until I tried to connect to open WAP at my school and couldn't so I connected to the wired network. Next morning I had this problem when connecting to my home network. My questions are 1. What could be the cause of this error and 2. where does one configure the network interfaces when using knetworkmanager
View 4 Replies
View Related
Jan 31, 2011
I often use an Ethernet cable to connect my computer to another computer for various purposes. But when I do that, I cannot use the internet even though I'm still connected to a WiFi access point. I'm presuming that's because openSUSE is trying to reach the internet through the Ethernet cable, which has precedence over WiFi.Is there a way to enable internet usage via WiFi while I'm connected to another computer over Ethernet?
View 9 Replies
View Related
Mar 12, 2011
I have no Internet Access with Firefox
I first tried an upgrade from 11.3 to 11.4 and lost Internet Access, so i re-loaded 11.4 from scratch on clean partitions.
I am connected to my wireless WPA2/PSK connection, have an IP, am able to see the network.
I turned off and disabled the SUSE firewall.
I tried setting Firefox proxy settings to auto and to none, i dont use proxy.
I am currently posting this through an SSH connection to my 11.1 server from the new install of 11.4 on a Dell latitude D600 laptop (not using the on-board Broadcomm that is an issue for a later date).
I am running out of ideas anyone got a clue.
View 9 Replies
View Related
