Fedora Servers :: Setup A Samba Network Share With A Directory Server Backend?
Feb 24, 2009
I'm trying to setup a Samba network share with a Fedora Directory Server backend. This will be used primarily for Windows users to authenticate before accessing the share. I am using Fedora Core 10 and have all of the latest updates installed. When I try to connect from a Windows machine, I am prompted for a username and password. I enter the username and password of the account I created in Fedora Directory Server in OU=People. The credentials are rejected. At the same time in the log file I see this:
[2009/02/24 16:50:16, 3] auth/auth_sam.c:check_sam_security(282)
check_sam_security: Couldn't find user 'Administrator' in passdb.
[2009/02/24 16:50:16, 2] auth/auth.c:check_ntlm_password(318)
check_ntlm_password: Authentication for user [Administrator] -> [Administrator] FAILED with error NT_STATUS_NO_SUCH_USER
Administrator is the user I created in Fedora Directory Server. If I perform an ldapsearch it will find the user as uid: Administrator so I know it is able to be looked up in FDS. But I'm guessing that's not the problem.
[Code]...
View 4 Replies
ADVERTISEMENT
Mar 31, 2009
if i try to connect to my samba server ( share ) from my windows xp ( or vista, i've tried both ) it says, that the network share cannot be found. i've installed all necessary rpms on my fedora 10, necessary for running a samba server:
Quote:
[root@********* samba]# rpm -qa |grep samba
samba-common-3.2.8-0.27.fc10.i386
samba-3.2.8-0.27.fc10.i386
samba-winbind-3.2.8-0.27.fc10.i386
after that, i've configured the smb.conf file, as follows:
Quote:
[root@*********** samba]# cat /etc/samba/smb.conf
#======================= Global Settings =====================================
[global]
# ----------------------- Netwrok Related Options -------------------------
workgroup = GROUP
[code]....
there is no iptables definition, or any other firewall installed, neither on the server nor the client. i've read through alot of howtos an manuals, but was not able to find the problem.
View 14 Replies
View Related
Feb 10, 2010
running a Ubuntu 8.10 Desktop in the living room with a LOT of files. I've tried all week to get this working, and can't tell where the problem is. I want to make a music share that will: Allow guests, but as read-only Allow me to mount in Windows 7 with the user 'thecheeks' Give user thecheeks read/write access to that share
I swear Samba ends up working but maybe the problem is with Windows 7. I looked at the SAMBAWiki Win 7 page and made sure my registry values were what they should have been (and they were).
View 1 Replies
View Related
Feb 15, 2011
I have a couple of user accounts where each member belongs to a group i have created: Each user access the share using their own user account credentials.
How can I configure Samba in a way so that each modification done on the share gets the owner of the user and my group instead of the user and the users own group? I would also like the access rights to be 770 to each modification.
In other words, today each modification by "userA" get the owner "userA.userA" and I would like it to be "userA.MyGroup" with "rwxrwx---" permissions.
View 3 Replies
View Related
Aug 28, 2010
I have currently have opensuse 11.2 installed. I am trying to setup samba shares which you can only access as certain user. Currently looks like the only way I can access these share is use root username/password!
I want to which GUI I need to use to setup this up properly. And of course what setting to exactly to use.
View 2 Replies
View Related
Jul 14, 2010
I want to share a same directory so that it can be accessed by both Linux clients & windows clients. how can i do this? i want to share that directory with both NFS & samba services. Is it possible to do this?
View 3 Replies
View Related
Jun 1, 2011
Come back to forum after long gap, after using Ubuntu for the last few years i finally move to fedora again with Fedora 15. I like this version of Fedora, it's clean & simple. But i'm having few problems as well. I want to share some folder of my fedora machine with a windows machine of my home, so that my younger brother can access those folders from his windows machine & copy files to his computer. for this i need to setup samba, i already install samba related packages. but can't start system-config-samba from Application Menu. When i go to start this, it asking for authentication & after giving password nothing happend at all! i try to start this from Command line with-
[Code]....
at present, i can browse shared folders from other machine of my home network, but my fedora machine is absent in list of machines, so my brother can't access shared folders of my machine. how can i setup samba share in my fedora machine? so that i can easily share folders with other machine just like ubuntu.
View 14 Replies
View Related
Mar 15, 2010
I have the follow environment
PDC SAMBA + OPEN LDAP (ubuntu 9.04)
Linux (File Servers) + Windows machines all working well
I'm trying to set up a share drive on my new server using ubuntu 9.10 with samba (v 3.4) and ldapclient and the shares are not working when I defined Valid Users for share folders, that keep me ask me about my user and password, on the logs I have:
[2010/03/15 10:24:10, 1] smbd/service.c:676(make_connection_snum)
create_connection_server_info failed: NT_STATUS_ACCESS_DENIED
This is my smb.conf
[global]
workgroup = FLOWCONNECT
server string = OSLO SAMBA FILE SERVER [code].....
I have the same set up on my File Server (Ubuntu 9.04) which use samba 3.3 is working fine.Someone know if has some different setting between samba 3.3 (ubuntu 9.04) and samba 3.4 (ubuntu 9.10) that could cause this problem ?
View 1 Replies
View Related
Jul 7, 2010
I cannot browse the samba printers from windows xp professional clients.
I get the following message when trying to access the workgroup:
Code: Example is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The list of servers for this workgroup is not currently available
Another strange thing is that if I set the workgroup to EXAMPLE in smb.conf, the workgroup shows up as Example on my windows clients.
View 4 Replies
View Related
Jan 12, 2011
In my work I want to build up a Linux based network, where windows and linux clients are going to share a Thecus network drive.Each client will have specific permissions for accessing the samba shares. I have installed Ubuntu SRV 10.4 with gui and webmin.
View 1 Replies
View Related
Oct 14, 2010
i manged to get a samba server up and running to share with my windows machines. But i still want more. My main goal is to be able to share my movies. I have a laptop hooked to my flat screen with 3TB's of external drives, thats whats acting as my server. I have ubuntu desktop installed because i use it to play movies also.
I'm looking to set up something that is a little faster than samba (yes i no trying to share through USB 2.0 external drives and a wifi connection isn't going to be real fast no matter what) but i want to be able to access my server remotely. like maybe FTP? but what i'm asking here is what protocol should i use and what programs? i was thinking gadmin-proftpd and then filezilla to access?
View 9 Replies
View Related
Aug 7, 2010
I just noticed that I find lots of hidden files named ".directory.lock.??????.test" across my samba-shared file system. The questionmarks stand here for some random alpha-numeric patterm.
- Which application might have created them?
- Is it save to delete those ?
With e.g. "find . -type f -name ".directory.lock.??????.test" -exec rm -f {} ;"
View 1 Replies
View Related
Jun 9, 2011
I've tried to followed exactly the steps in:
[URL]
on how to setup Samba PDC w/ LDAP backend. I've reach far up to page two of the tutorial. However I'm stucked in the middle of the part of page two:
[URL]
in the part of the Start the LDAP Samba installation up and I should type the :
#useradd user1
#smbldap-useradd -a -G 'Domain Users' -m -s /bin/bash -d /home/user2 -F "" -P user1
I get this error:
Error looking for next uid in sambaDomainName=sambaDomain,dc=DOMAINNAME:No such object at /usr/lob/perl5/vendor_perl/5.8.8/smbldap_tools.pm line 1194.why does this appear, Is there any configurations missing?
View 1 Replies
View Related
Jan 26, 2011
I wan't whatever file/folder that ends up in the public folder to automaticly be open to whosoever access that folder. Right know I have to "chmod -R 777 file/folder.* "
View 4 Replies
View Related
Dec 18, 2010
I have a server with Fedora 13 with which I would like to get NFS working. I have looked up multiple howto's and tutorials, but I'm having a problem not addressed by any of them.Official how-to, another how-to, and another how-to.I have verified that nfs-utils, nfs-utils-lib, portmap, and system-config-nfs are installed and running. I have verified that I have, in fact, shared the directory that I want to share, and that the proper permissions are set.
I had to go through some gyrations to get the Belkin wireless N router to allow my server to have a static IP. However, I can ping the server from the nfs client (a toshiba satellite running mint 8), and vice versa. I have (for now) disabled firewalls on both computers. I think I have disabled SELinux on Fedora 13 (for now).When I attempt to connect to the server from the client, the output looks like this:Quote:
aragorn ~ # mount -v 192.168.2.101:/test /home/kelev/test/
mount: no type was given - I'll assume nfs because of the colon
mount.nfs: timeout set for Sat Dec 18 12:21:09 2010
[code]....
View 7 Replies
View Related
May 29, 2009
I have a server which currently has a samba share for a printer and my home directory. Both have been working fine for a while now. I have a drobo (which is like a little USB RAID machine) connect via USB to the linux box. While trying to share it via samba I get weird messages from my windows machine (see screenshot). I have tried to share multiple folders on this drobo and no luck, all the same result.
I also tried a symbolic link, no good.
Here is a screen shot
http://aivila.com/temp/screen.jpg
Here is my smb.conf file:
Code:
[home]
path = /home/savona
read only = no
[Code]...
View 12 Replies
View Related
Sep 3, 2010
How can I set permissions for users within the share?
Example: I have a share called Programming and some user can create folders within it most others can not, can read the documents.
How do I set permissions?
View 2 Replies
View Related
Apr 15, 2010
I set up a Samba server on my openSuSE 11.2 machine and I can connect to it locally with the local ip and with my actuall ip. My friend however cannot. I tried to have him ping my ip and that wouldn't even work. I'm confused and wondering why it doesn't work. We share a lot of files and this would make both of our lives much easier.
View 9 Replies
View Related
Jul 12, 2011
In this post I will give a quick solution for a possible problem with sharing a folder in Fedora 15.I had to spend some time for research and frustration so, hopefully this post will save you from both. If you have Samba installed and configured to share certain folders on your Fedora machine for a Windows network but, they can't be accessed then following might solve the problem:
1. Go to Applications, Other and run FIREWALL
a). go to TRUSTED SERVICES and check SAMBA and SAMBA CLIENT that are located in the list of services
b). click APPLY
c). go to ICMP FILTER and check ECHO REPLY (PONG) and ECHO REQUEST (PING)
c). click APPLY
[Code]...
If your Samba is configured correctly, your shared folder should be available on your Windows network.A little hint: if you don't want other users to use passwords for accessing your shared folder, select SHARE as an Authentication Mode in Samba GUI Configuration Tool, Preferences, Server Settings, Security
View 3 Replies
View Related
May 13, 2009
I don't think it has anything to do with the config file. More to do with SElinux. I need to know how to configure SElinux so I can see my samba share when SELinux is on. When I setenforce 0 I can seen all the files and folders set it to setenforce 1 cannot see anything.
Here is the output when I ran [root@fileserver /]# getsebool -a | grep smb
allow_smbd_anon_write --> on
smbd_disable_trans --> on
These two options were off I tried turning them on.
This is another one of the commands I tried running. I did change a few options but I am not sure which I do need to change. I am running a stand alone server so I don't need the DC option.
[root@fileserver /]# getsebool -a | grep samba
samba_domain_controller --> off
samba_enable_home_dirs --> off
samba_export_all_ro --> on
samba_export_all_rw --> off
samba_share_nfs --> off
use_samba_home_dirs --> on
I can also post a copy of my smb.conf file too.
View 1 Replies
View Related
Mar 13, 2011
Running samba-3.5.6-71.fc14.x86_64. Why cant I access samba share by short-hostname from win7. When I ping short-hostname, the answer is the actual ip and short-hostname.mydomain.com
sa pinging short-hostname does work, but accessing it from start-run does not! Accessing by ip or short-hostname.mydomain.com works fine. ssh by short-hostname from win7 works fine too.
View 14 Replies
View Related
Mar 23, 2011
My Fedora router has three nic's, one for the internet, one for lan and one for the wireless network, which uses hostapd. I have set up samba in order to enable windows file sharing from wireless lan to wired lan. Using the samba documentation I have enabled the wins server and wins proxy which should allow met to browse the shares across the networks, which theoretically should do the trick but it doesn't work as expected. I can see the pc's from the other network using windows neighbourhood, but as soon as I access one of them it fails saying that "network path could not be found" or something like this. Tried using windows 7, windows xp and linux for browsing but the result is the same. As firewall I have shorewall and the samba specific ports are enabled for both networks. How to setup samba for inter-network browsing?
I have attached the global config section from smb.conf file:
Code:
[global]
server string = Samba Server
interfaces = eth1, lo, wlan0
bind interfaces only = Yes
security = SHARE
log file = /var/log/samba/%m.log
max log size = 50 .....
View 9 Replies
View Related
Jan 3, 2010
I just recently constructed a computer to create a nice Fedora Linux server to replace a Mac Mini server that I have been using for a few years. I'm attempting to create a Samba share for my machines, a Windoze 7 machine as well as a couple MacOS 10.6 machines. I've set up Samba, started the service, allowed Samba in the firewall, and used system-config-samba to set up a share with a user. I created a User called "space", and a share /media/peliculas/Movies (a mounted hard drive). When I type in \IP_ADDRESS in the address bar in windows 7, I get the option to log in. I log in correctly and I see two directories "space" and "Movies." Unfortunately when I click on one of them I get the following error message:
Windows cannot access \IP_ADDRESSMovies Check the spelling of the name. Otherwize, there might be a problem with your network. To try and identify and resolve network problems, click Diagnose. I also get something similar when I attempt to connect with my mac machine. Using "Connect to Server" I type in: smb:\IP_ADDRESS, and login, I have the option to mount "Movies" or "space." If I select any of these, I get the following error message: There was an error connecting to the server "IP_ADDRESS." Check the server name or IP addres, and then try again. If you are unable to resolve the problem contact your system administrator.
Also, if I type 'smbclient -U space -L IP_ADDRESS' I can see the "Movies" in the "Sharename." At this point I'm not sure what else to do, and have been trying to figure this out for the last few days (losing sleep due to being baffled). The only thing that I can think of is that I have something wrong with the smb.conf file. Here is what it currently displays:
Global Settings
workgroup = WORKGROUP
server string = Samba Server Version %v
log file = /var/log/samba/log.%m
max log size = 50
[code].....
One last thing, when I check the log files, there are error messages that state: smbd/service.c:1009(make_connection_snum) '/home/space' does not exist or permission denied when connecting to [peliculas] Error was Permission denied --Windoze 7 and MacOS 10.6 log files
View 5 Replies
View Related
Apr 6, 2010
Does anyone have a link to a tutorial on how to set up a DHCP server and SAMBA as a windows domain controller? I can't really find good detailed guides by searching google.
View 2 Replies
View Related
Mar 1, 2009
I have a fedora 10 box with two network card on eth0 I have a pppoe connection to the internet, on second card eth1 I share my internet connection end I set up a samba server but I don't know if the settings are good. How to do this settings right to work fine, the ip are assigned by dhcp I don't use any static ip .When I try to browse the internet from the other computers some site's like {.com ; .org ; .info} are block, other site from {.ro} are working. Someone tell me something about turn off all my filters, but I don't know where to find this filter to turn it off. And when I use samba I can't have and internet access or vice versa. My network look like that:
Code:
eth0
|<--pppoe connection
|
MyComputer
(fedora 10)
|
eth1
|
switch
|
comp.1 comp.2
Win OS MacOS
View 2 Replies
View Related
Feb 24, 2009
I've got my Samba shares up and running. I can stream files from the server, I can create files on the server, and I can copy files from the server.
Running a Windows program (from a Windows box) directly from the Samba server, however, is turning into a nightmare. I'm getting Access is Denied errors from the Windows box, yet I can copy/create/etc from the entire directory with no problems.
Are there any special permissions I need to run EXE files from a Windows box, located on a Samba share? I've already chmod'd everything to 777, and I show full access when ls -Z is used.
View 2 Replies
View Related
Jul 22, 2010
We have a couple of Windows file servers that just share files. It is all they do. We'd like to use Ubuntu on two replacement servers allowing Windows XP and Windows 7 clients to access the files. Our network is active directory based due to Exchange and homegrown .NET apps, so it is important that active directory is used to authenticate the clients. Samba doesn't need to be a pdc or bdc, but provide pass through authentication.I understand that Samba can communicate with active directory through security-ads and security-domain.
Here are my questions to see if I should proceed:1) Folder permissions:If we move all our files to the Ubuntu server how do we set folder permissions and will we see the active directory accounts when we do this?2) Skipping ubuntu accounts: I know the domain and ads allow you to skip creating ubuntu accounts, right? If not, how do you keep the passwords synchronized?3) Easiest way? Is there a very easy way to pull this off that I've missed? My goal is to eliminate the Windows based file servers while ensuring the admin part of it is as easy as possible.To date I've been able to get the sharing to work with an ubuntu account mirroring the active directory account. I've been able to get Samba to talk to the pdc, but not successfully through domain security. ADS security was a complete cluster with winbindd
View 3 Replies
View Related
May 4, 2010
I am attempting to setup the following:
1.User login/authentication via a single NIS server.
2. User home directory should also be on the Same NIS server.
3. If possible to setup a single shared home directory for all users.
OpenSuse version 11.2 There are twelve workstations from which users will login using the NIS authentication. I have succeeded in setting up NI server. However login fails as the home directory is not accessible.
View 9 Replies
View Related
Mar 27, 2011
Continuing with my assigned task of migrating the company's PCs to GNU/Linux (openSUSE as server for GNU/Linux clients) I managed to set up a DC with roaming profiles for the few remaining Windows users, user validation and login for the openSUSE boxes and a few network shares with different rights. I know there are no roaming profiles for GNU/Linux and I can live with that but I would like to specify wich users/groups would have their home directories saved locally (notebook users) and which will save them on the Samba server.
By default home directories are saved locally but somehow Samba creates a minimal home directory for each user under /home in the Samba server. How can I tell the client box to use that directory? and how can I set up the few notebook users to save it on their disks? Maybe using the options under Yast > Security... > Users and groups management > Users (LDAP Users filter) > and then select the user and use the "Manage Samba account parameters" plug-in for specifying the different paths cant achieve this.
View 4 Replies
View Related
Mar 12, 2010
Running NFS on Fedora 10. Exports fine. I tested it locally. I tested the NFS configuration by trying to access the exported directory from my local machine, before testing it from a remote machine. While logged in as root, I created a new directory "/mnt/nfstest".
Then I mounted the NFS share at the new directory I created:
[root@eric root]# mount -t nfs localhost:/mnt/nfs /mnt/nfstest
When I tried to mount on the remote client:
[root@frank root]# mount -t nfs eric:/mnt/nfs /mnt/nfstest
After a while I got:
# mount eric:/mnt/nfs /mnt/nfstest
mount.nfs: mount system call failed
I tried strace but wasn't sure what I was looking for, but I've attached the results as a .odt file.
View 1 Replies
View Related
