OpenSUSE Network :: No Network On Xen Host
Mar 12, 2011
EDIT: Thread name should be "No network on XEN guest ofcourse". I am trying to run OpenSUSE 11.3 as guest in OpenSUSE 11.2 as host. First problem I came across was libvirtd service wasnt started and after that I was able to install guest OS. Now there is a problem as guest doesnt have connection with internet.
Here is the script for the guest
name="opensuse113"
uuid="2f1f1d63-c416-a9c4-3bc1-4e92e248c5cc"
memory=512
maxmem=512
[code]....
Here are the images that show how it is all configured taken from Virutal Manager.
network1 png
tmpbridge png
host config png
The last image is from the guest config I just named it badly. Observe that xen is up and runing and there are no others issue this far.
View 2 Replies
ADVERTISEMENT
Mar 9, 2010
I have a mac and an openSUSE box connected wirelessly to a router. From my mac, if I ping the Linux machine by both ip address and hostname "elmo.local", I get a response. If I ping my mac from the Linux machine using its ip address, I get a response. However, if I ping the mac from the Linux box using its name "kermit.local" - nothing!
This means in order to share files between them via the network, I have to use the ip address rather than name, but I'd rather not. When I had Ubuntu installed instead of openSUSE this all worked fine out of the box, so I'm assuming it's a problem with the setup of openSUSE rather than the router or the mac.
View 4 Replies
View Related
Mar 9, 2010
I just intalled OpenSuse 11.2 on VmWare Server 2.0.2, the network is configured as Bridged and is sucefully configured a fixed IP in my network. Ok... The problem is... I can ping / trace all addresses from OpenSuse console. But I Can't wget all of them... It's a random thing. the same address that trace's ok, don't work for HTTP.
View 2 Replies
View Related
Mar 16, 2011
I have just loaded Suse 11.4 and have had (2) problems, 1st: When I installed some additional programs, such as, Scribus, the system showed them as installed but they did not show up in the "applications" menu any where. I finally tracked them down and edited them in and they work fine - Why aren't they being automatically placed into the menu system? 2nd: I have a home network setup and all systems can see and work with each other, however, the host system is not shown as if it did not exist at all. for example; if I go to "network services" and select "Samba Shares" if other computers are connected it will show them but not the host - if no other computers are connected it shows nothing. On my 11.3 system it shows the host eg; "Linux-12fx blah blah" this is of course my host machine. I have replicated all of my settings on the 11.3 settings on my 11.4 system - no luck!
View 4 Replies
View Related
Aug 30, 2010
today I tried to configure a network route to a host for testing my network interface. Code: route add 192.168.1.15 eth0 As I have to eth interfaces and both interface got their IP from DHCP (192.168.1.11 and 192.168.1.12) and are in the same subnet, I shut the other interface down:
Code: ifconfig eth1 down Then I tried to test the interface by doing a ping to 192.168.1.15.
Problem: When I unplug the cable from eth0 (and eth1 is still plugged) the ping still works. Somehow my linux (it's debian) powers up again eth0 and pings over this port.
How can I stop my linux doing this. I just want to have the route added only on the one interface - not the other. Is it maybe some case of a default-gateway?
View 5 Replies
View Related
Jan 2, 2011
I need to blacklist any incoming/outgoing connections to Google. I need to add filter something like this: *google*
View 5 Replies
View Related
Jan 3, 2010
OpenSUSE version: 11.2 *and* 10.0 I am unable to send email. It appears I am being blocked by my ISP [URL]... A Wireshark trace shows ICMP type 3 Code 13 - "Administratively filtered". It's important to note that I don't know exactly when the problem started, because I seldom use my ISP email account, I use Yahoo web mail due to the "throwaway" nature if I get hit with spam. I only discovered the problem when testing the functionality of 11.2. I suspect the problem started several months ago: I restored openSUSE 10.0 and the problem exists there too. I wish I'd sent that last email via 10.0 before the upgrade.
The weird thing is that using Windows 2000 box I can get a successful connection using telnet (Telnet also fails on the openSUSE box.) It appears to me there is something in the Linux TCP stack that Teksavvy doesn't like. I am on dial up and I pointed this out to Teksavvy tech support, as I am probably the only person left on dialup and the reason no one else has reported the problem
View 9 Replies
View Related
Jan 8, 2010
I can lookup DNS hostnames with dig and nslookup, but nothing else seems to be able to resolve anything. ping, telnet, Firefox, everything gets "unknown host".
For example:
> dig yahoo.com
; <<>> DiG 9.6.1-P2 <<>> yahoo.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 20438
;; flags: qr rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 13, ADDITIONAL: 0
;; QUESTION SECTION:
;yahoo.com.INA
;; ANSWER SECTION:
yahoo.com.17579INA209.131.36.159
yahoo.com.17579INA209.191.93.53
yahoo.com.17579INA69.147.114.224
;; AUTHORITY SECTION:
.10071INNSL.ROOT-SERVERS.NET.
.10071INNSI.ROOT-SERVERS.NET.
.10071INNSH.ROOT-SERVERS.NET.
.10071INNSF.ROOT-SERVERS.NET .....
> ping yahoo.com
ping: unknown host yahoo.com
> ping 209.131.36.159
PING 209.131.36.159 (209.131.36.159) 56(84) bytes of data.
64 bytes from 209.131.36.159: icmp_seq=1 ttl=55 time=97.2 ms
64 bytes from 209.131.36.159: icmp_seq=2 ttl=55 time=98.9 ms
View 4 Replies
View Related
Apr 8, 2010
I am running
Code:
On my laptop (HPDV7), using DHCP for network access, KDE4.
I use Network Manager to manage wired and wireless connectivity.
I also have Samba server running for connectivity to Windows machines.
My router runs DD-WRT.
How do I tell this HPDV7 system to propagate a Host Name up to the router?
In the DD-WRT status screen, I see Host Name as "*" associated with the assigned IP address.
I cannot, for example, ping my HPDV7 machine from my windows machine, I assume because the router (also providing DNS for my network) does not provide the name to address translation.
I CAN ping the IP address directly, and Samba connectivity from the Windows machine to HPDV7 works.
The file
Code:
View 3 Replies
View Related
Aug 5, 2010
I am running 11.2 and set ssh to boot at runlevel 3 and 5 through yast and started the service through the terminal. I have turned off the firewall on my wireless router and in the local firewall. When I try to connect from a machine in my office, I get the following
Code:
ssh: connect to host xx.xxx.xx.xxx port 22: Connection refused
When I run telnet from the machine, I get:
Code:
telnet: connect to address xx.xxx.xxx.xx: Connection refused
telnet: Unable to connect to remote host: Connection refused
netstat -tlnp on my machine shows:
Code:
tcp 0 0 :::22 :::* LISTEN 31622/sshd
View 9 Replies
View Related
Mar 19, 2010
I am trying to enable DHCP so that it will give out IP's to some XP boxes when they boot. I have had success doing it dynamically, but not statically using the host declaration.
host xpTest {
hardware ethernet 00:50:56:2A:3B:00;
fixed-address 192.168.100.2;
}
My question is, what should the subnet declaration be if I only want to hand out static IP's like this? Also, the host is the same name that is specified in /etc/hosts correct?
View 3 Replies
View Related
May 5, 2010
I'm running openSUSE 11.2 (Linux piura 2.6.31.12-0.2-desktop #1 SMP PREEMPT 2010-03-16 21:25:39 +0100 x86_64 x86_64 x86_64 GNU/Linux) and have a network problem. At work, ethernet works fine. When I plug it into my DSL router at home (which works with other computers), I encounter the following behavior: ping can resolve host names, however, traceroute and Firefox and Thunderbird cannot.
It happens for both wired and wireless connections.
View 9 Replies
View Related
Dec 7, 2010
How I setup my NetworkManager to use the correct host name on my system, if that is possible. NetworkManager ignores the specified hostname and uses 'localhost', which is a bit annoying.
View 9 Replies
View Related
Oct 30, 2010
I just installed (n this 11.2 system) vmware server (v 2.02), to have access to a few small systems. One of them is a 11.1 guest which I just upgraded to 11.3, successfully (almost).
I have a problem, though: from the host I can not ping/ssh the guest.
Guest to host works fine (including names).
Code:
The firewall is down on both sides. I don't see anything with iptraf in the guest. The IP addres of the guest is correct, unless I'm too tired to see.
Why?
Code:
View 9 Replies
View Related
Jan 27, 2009
The internal network is behind nat done by the PC Router.The TP Link is recieving wireless signal from outdoors and it has switching and basic routing capabilities. I'm using the PC router for better routing options.PC Router (or R for short) is a triple-booting machine - Linux, FreeBSD and Windows. It has two lan cards - external (ext_if) - 100Mbps Realtek 8139 and internal (int_if) - 1Gbps integrated Realtek 8169.The problem is that all traffic from R to the network is slow - about 5-20K, while the traffic in the oppoiste direction is all right - about 10MB that is fine for 100Mbps cables, NICs and switches. The problem persist no matter the OS the pc R is running.I've tried some debugging on the situation as follows:
- put another PC at the place of R - everything is fine. That exclude the possibility of damaged cables, RJ-45s, switches and etc.
- connected both of the NICs to the Internet while the internal network is being disconnected and they both work fine (no delays)
- traffic shaping is not running
- there is nothing in firewalls except NATing the internal network (and it is working fine). Actually these firewall rules have been operational for more than months and everything was fine untill a week or two ago.
- changed the internal NIC with another
- connected the internal network directly to the TP and all of the PCs are getting good network performance. Then connected the R machine to the TP as well and there was good performance between the internal network PCs and R.
- R has good performance to the TP. In fact everything has good performance directly to the TP (when not connecting trough R).
- the problem persist only between R and machines from the internal network.
View 2 Replies
View Related
Oct 31, 2010
On Linux Mint (Gnome) i used to go to Network drive. that is on the right hand side of Nautilus there is a short cut for Network. in there i could see my network hard drive and other laptops connected to the network, and i could access my files. but on OpenSuse, when i open the network folder, nothing comes up. may be it needs some sort of configuration.
View 2 Replies
View Related
Apr 15, 2010
I need some advice about virtual hosting on opensuse 11.1. I have about 6 domains running on the server. I use Webmin and Virtualmin on my server. Everything is working ok but I feel that I do something wrong
1. Lets say I have [URL] web and mail server running. When I write [URL] on my browser, the site is coming up but when I also write [URL] and I see the same page. There is no record on apache for [URL], there is only DNS record for the mail server. What do I do wrong?
2. Apache conf. is as below; do you think is it better to write "any" on address section instead of ip? What is the difference?
Address 88.11.11.111 (ip isn't true) Port 80Server Name domainname.com Document Root /srv/www/domainname.com/public_html
3. IP Address is the same for all domains. How I can configure that; when I write the ip address on my browser, only the specific site which I choose will be opened? Whichever I created last, that site is opening right now.
View 4 Replies
View Related
May 24, 2010
How do I find out the network usage ie the total amount of data is transferred in or out of my computer (openSUSE 11.2 and gnome) and keep a track of the total network usage?
View 1 Replies
View Related
Jan 3, 2011
When I try to connect to a new network it keeps trying to use the name of the last network I connected to. This has just started happening in the last two months.
View 9 Replies
View Related
Dec 31, 2009
I have four PCs in my house that are running opensuse 11.2 and I want to create a home network to share files, scanner and printer.
View 4 Replies
View Related
Jan 21, 2010
I'm new to networks and servers, been using Linux on the desktop for a while now but always relied on the company's IT guy for setting up everyting LAN-based.
Now I want to build up my home LAN, and want to do it with Linux. I've managed to set up LAMP and file share servers.
What I am looking for is information on what I need, and how to set up a server for the following tasks:Centralized Username and Password, that when the user logs into any one of the desktops in the LAN, it uses this for authentication
Something that allows this authentication to be utilized in other servers (file access, web access, router logging, etc.). Something to make it easier for continuing permissions from one service to another. e.g. I have IPCop filtering content, and it has provisions for tracking who is making which request if there is authentication going on. (optionally) to run a script for mounting Samba shares or mapped network drives so from one system to the next. For example, in whatever box somebody logs in, it mounts a server share ("smb://Myserver/users/<username>") to a local folder ("my_user_share").
So;user "fred" ="smb://Myserver/users/fred" and user "wilma" = "smb://Myserver/users/wilma" but both would find their respective one mounted under "~/my_user_share". This would be irrespective of which box they are loggin in with. If the server share location changes (new server/servername), I change it on the server so the next time they log in it points to the right place.
I guess it is similar to Window's Active Directory, though I'm not sure what it's called, how to configure it and what it is and is not capable of doing.
View 2 Replies
View Related
Feb 26, 2010
I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies
View Related
Mar 5, 2010
How do I activate static DNS for mobile broadband. I can't find any place to write down this information. Settings are made in Network Manager - not Yast.
View 3 Replies
View Related
Jun 13, 2010
I setup the hostname for my linux machine to Linux. If I try ping Linux from the same computer it works. If I try from another computer inside my network the host can not be resolved. If I ping the IP from another computer it works.
I take a look in my router at DHCP client list and my linux machine doesn't have the Hostname set up.
How to broadcast the hostname to the entire network?
View 8 Replies
View Related
Aug 29, 2010
I just installed open Suse 11.3, and I cannot SSH my school. Upon further investigation I could not even ping any machines outside my local area network. Ironically I could nmap machines outside my local area network.
View 4 Replies
View Related
Jun 7, 2011
I've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
View 4 Replies
View Related
Jul 27, 2011
I am facing two issues with CUPS - 1. I have installed cups 1.3.9 over OpenSuse11 x86. Please check below -
cups:/usr/share/cups/banners # cups-config --version
1.3.9
cups:/usr/share/cups/banners # cat /proc/version
Linux version 2.6.27.7-9-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
I have added few printers over there and everything is working fine. I can also able to add - delete - modify any printers from "yast2 printer" command. I can also able to browse cups web interface via http://cups:631, but when I am going to manage the printers (start - stop - delete etc), none of the buttons are working in firefox5 not even in IE also. Older version of firefox is giving error as "This address uses a network port which is normally used for purposes other than Web browsing. Firefox has canceled the request for your protection." All other buttons are working properly.
2. LINUX - LINUX Printing - OK
LINUX - WINDOWS Printing - OK
WINDOWS - LINUX Printing - NOT OK
While giving printing from Windows machine (Printer attached on Linux), there is no problem to coonect the printers, but unable to print.
View 3 Replies
View Related
Mar 10, 2011
After installing 11.4, I need to type in the command to update the firmware for a broadcom wifi adapter. Then I needed to reboot, twice, before the system knew to use the adapter (where the adapter wifi light goes from orange to blue).
Then I needed to add my wireless network and type in my key. But the key does not take. If I click on my wireless network icon, it just re-asks for the key and does not connect nor give any other message. Network icon continues to display no connection.
So I need to reboot again.
When the system starts again, the adapter is blue, I click on the icon for my wifi network and it connects without asking for my key and I can then set to start my wifi by default.
Now my wifi works fine.
View 1 Replies
View Related
Jun 1, 2009
I am trying for the last many days to setup my opensuse 10.3 as Samba PDC Server according to the URL mentioned below, but in vain:How to setup SUSE 10.3 as Samba PDC - openSUSE When ever I try to join a Windows XP machine to the domain setup on Opensuse, I get the error:'The following error occured while attempting to join the domain. The network path was not found'. What could be the reason for this error despite of the fact the I am able to ping the FQDN of the PDC from the XP machine, but the XP machine simply denies to join the domain because of the above mentioned error.
View 7 Replies
View Related
Jan 13, 2010
Does anyone know how to permanently enable X connections from all machines on my local network. I keep having to enter 'xhost +' to allow X connections.
View 2 Replies
View Related
