OpenSUSE Network :: Host Not Recognized On Network
Mar 16, 2011
I have just loaded Suse 11.4 and have had (2) problems, 1st: When I installed some additional programs, such as, Scribus, the system showed them as installed but they did not show up in the "applications" menu any where. I finally tracked them down and edited them in and they work fine - Why aren't they being automatically placed into the menu system? 2nd: I have a home network setup and all systems can see and work with each other, however, the host system is not shown as if it did not exist at all. for example; if I go to "network services" and select "Samba Shares" if other computers are connected it will show them but not the host - if no other computers are connected it shows nothing. On my 11.3 system it shows the host eg; "Linux-12fx blah blah" this is of course my host machine. I have replicated all of my settings on the 11.3 settings on my 11.4 system - no luck!
View 4 Replies
ADVERTISEMENT
Feb 24, 2011
Just installed 11.3 kde. When running the live cd both wireless and ethernet devices appeared in the network connections manager utility. I even connected to a wireless AP.I just booted up for the first time and none of these devices are available. There is no network manager icon in the system tray, and when the network manager utility is maually opened the only connection type i can select is vpn.I know that opensuse should be able to recognize these devices since they were available and working via the live cd, so can anyone help me restore them?
One extra piece of info, is that I am sharing a home directory with a gnome ubuntu install. there were a few minor issues i dealt with initially, but i didnt need to change this user's UID like I have had to do in the past so that's good. Each time i open a terminal I get two pieces of output assuming from the bash startup saying something like.URL...I highly doubt that these problems are related, but figured I'd post. Also if someone knows the solution to that as well, that would save me a bit of googling.
View 6 Replies
View Related
Mar 9, 2010
I have a mac and an openSUSE box connected wirelessly to a router. From my mac, if I ping the Linux machine by both ip address and hostname "elmo.local", I get a response. If I ping my mac from the Linux machine using its ip address, I get a response. However, if I ping the mac from the Linux box using its name "kermit.local" - nothing!
This means in order to share files between them via the network, I have to use the ip address rather than name, but I'd rather not. When I had Ubuntu installed instead of openSUSE this all worked fine out of the box, so I'm assuming it's a problem with the setup of openSUSE rather than the router or the mac.
View 4 Replies
View Related
Mar 9, 2010
I just intalled OpenSuse 11.2 on VmWare Server 2.0.2, the network is configured as Bridged and is sucefully configured a fixed IP in my network. Ok... The problem is... I can ping / trace all addresses from OpenSuse console. But I Can't wget all of them... It's a random thing. the same address that trace's ok, don't work for HTTP.
View 2 Replies
View Related
Mar 12, 2011
EDIT: Thread name should be "No network on XEN guest ofcourse". I am trying to run OpenSUSE 11.3 as guest in OpenSUSE 11.2 as host. First problem I came across was libvirtd service wasnt started and after that I was able to install guest OS. Now there is a problem as guest doesnt have connection with internet.
Here is the script for the guest
name="opensuse113"
uuid="2f1f1d63-c416-a9c4-3bc1-4e92e248c5cc"
memory=512
maxmem=512
[code]....
Here are the images that show how it is all configured taken from Virutal Manager.
network1 png
tmpbridge png
host config png
The last image is from the guest config I just named it badly. Observe that xen is up and runing and there are no others issue this far.
View 2 Replies
View Related
Jul 12, 2010
my wireless home network is not recognized by my network card (RealTek RTL8190 mini PCI). The post was as follows: "I am using a new computer with Windows 7 , Athlon quad core 2.60 64 bit, 8GB RAM. Internet conection works fine with ethernet but ubuntu does not see my wireless network. card (RealTek RTL 8190 ID: 10ec:8190). Have searched this forum but unable to come up with a fix. I was looking for windows XP drivers to use Ndiswrapper but could not find a list of .inf files. My network is OK and works perfectly in windows and with my 2 laptops. Can anyone point me in the right direction? Additional info: install was done within Windows using WUBI to a separate partition on my HDD. I am new to this and thouroughly confused as to the procedure for installing the drivers if they are in fact available."
I am very frustrated in that I would like to use Ubuntu 10.04 but it is useless without internet connectability. I am new to linux and do not understand where to get the appropriate drivers or how to install them. I wish someone would answer this post and either give me a clue what to do or just say "give up" and uninstall ubunutu.
View 2 Replies
View Related
Jun 10, 2011
I am using 11.4 gnome desktop on hp elitebook 8440w. I have a reliance netconnect plus usb modem. (ZTE AC 2726).
Initially it was recognized but didn't work. But now system is not recognizing it. What should i do. Please suggest.
View 9 Replies
View Related
Jul 6, 2011
The proxy I set is not being used or recognized by some apps. For instance dropbox would be able to detect the proxy settings i set using yast>network>proxy while firefox would not recognize it. In firefox i tried using the automatic proxy and using the system proxy. Either of the two won't detect it. However, when I manually set it in firefox's preference it would work. For empathy the proxy is not recognized as well. In addition, can I set the proxy in the empathy app itself? I could not locate it. Also the online updates and repository checks recognizes the proxy I set up.
By the way I am using GNOME 3 as my DE. I would also like to share that when I use the network settings > proxy of gnome 3 none of the apps recognize the proxy.
View 5 Replies
View Related
Aug 11, 2011
I Have an HP Pavilion G6. I recently installed openSUSE after having no luck with another linux distribution. I was told openSUSE is more compatible with laptops, so I figured I'd give it a try. I am now facing the same problem I had been facing w/ the other distribution (Ubuntu). My Network Adapter doesn't seem to be recognized by any linux operating systems. It is a Ralink 802.11b/g/n WiFi adapter. When I open the "network" tab, my home wifi is not listed, nor are any around me. In fact, I can't even open the "wireless" tab.
I've installed any recent drivers for my adapter, and I went to extensive lengths to try to solve the issue on my previous linux distribution. I don't know what output to give you from the terminal, nor do I really know any commands to look for anything. On a side note, I had been messing with my touchpad application, trying to set my preferences. I check the boxes for horiz. and vertic. scrolling with two fingers, and apply. They don't work. I check the boxes for using two finger tap to do something, and three finger tap to do something else.
View 9 Replies
View Related
Aug 30, 2010
today I tried to configure a network route to a host for testing my network interface. Code: route add 192.168.1.15 eth0 As I have to eth interfaces and both interface got their IP from DHCP (192.168.1.11 and 192.168.1.12) and are in the same subnet, I shut the other interface down:
Code: ifconfig eth1 down Then I tried to test the interface by doing a ping to 192.168.1.15.
Problem: When I unplug the cable from eth0 (and eth1 is still plugged) the ping still works. Somehow my linux (it's debian) powers up again eth0 and pings over this port.
How can I stop my linux doing this. I just want to have the route added only on the one interface - not the other. Is it maybe some case of a default-gateway?
View 5 Replies
View Related
Jan 2, 2011
I need to blacklist any incoming/outgoing connections to Google. I need to add filter something like this: *google*
View 5 Replies
View Related
Jan 3, 2010
OpenSUSE version: 11.2 *and* 10.0 I am unable to send email. It appears I am being blocked by my ISP [URL]... A Wireshark trace shows ICMP type 3 Code 13 - "Administratively filtered". It's important to note that I don't know exactly when the problem started, because I seldom use my ISP email account, I use Yahoo web mail due to the "throwaway" nature if I get hit with spam. I only discovered the problem when testing the functionality of 11.2. I suspect the problem started several months ago: I restored openSUSE 10.0 and the problem exists there too. I wish I'd sent that last email via 10.0 before the upgrade.
The weird thing is that using Windows 2000 box I can get a successful connection using telnet (Telnet also fails on the openSUSE box.) It appears to me there is something in the Linux TCP stack that Teksavvy doesn't like. I am on dial up and I pointed this out to Teksavvy tech support, as I am probably the only person left on dialup and the reason no one else has reported the problem
View 9 Replies
View Related
Jan 8, 2010
I can lookup DNS hostnames with dig and nslookup, but nothing else seems to be able to resolve anything. ping, telnet, Firefox, everything gets "unknown host".
For example:
> dig yahoo.com
; <<>> DiG 9.6.1-P2 <<>> yahoo.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 20438
;; flags: qr rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 13, ADDITIONAL: 0
;; QUESTION SECTION:
;yahoo.com.INA
;; ANSWER SECTION:
yahoo.com.17579INA209.131.36.159
yahoo.com.17579INA209.191.93.53
yahoo.com.17579INA69.147.114.224
;; AUTHORITY SECTION:
.10071INNSL.ROOT-SERVERS.NET.
.10071INNSI.ROOT-SERVERS.NET.
.10071INNSH.ROOT-SERVERS.NET.
.10071INNSF.ROOT-SERVERS.NET .....
> ping yahoo.com
ping: unknown host yahoo.com
> ping 209.131.36.159
PING 209.131.36.159 (209.131.36.159) 56(84) bytes of data.
64 bytes from 209.131.36.159: icmp_seq=1 ttl=55 time=97.2 ms
64 bytes from 209.131.36.159: icmp_seq=2 ttl=55 time=98.9 ms
View 4 Replies
View Related
Apr 8, 2010
I am running
Code:
On my laptop (HPDV7), using DHCP for network access, KDE4.
I use Network Manager to manage wired and wireless connectivity.
I also have Samba server running for connectivity to Windows machines.
My router runs DD-WRT.
How do I tell this HPDV7 system to propagate a Host Name up to the router?
In the DD-WRT status screen, I see Host Name as "*" associated with the assigned IP address.
I cannot, for example, ping my HPDV7 machine from my windows machine, I assume because the router (also providing DNS for my network) does not provide the name to address translation.
I CAN ping the IP address directly, and Samba connectivity from the Windows machine to HPDV7 works.
The file
Code:
View 3 Replies
View Related
Aug 5, 2010
I am running 11.2 and set ssh to boot at runlevel 3 and 5 through yast and started the service through the terminal. I have turned off the firewall on my wireless router and in the local firewall. When I try to connect from a machine in my office, I get the following
Code:
ssh: connect to host xx.xxx.xx.xxx port 22: Connection refused
When I run telnet from the machine, I get:
Code:
telnet: connect to address xx.xxx.xxx.xx: Connection refused
telnet: Unable to connect to remote host: Connection refused
netstat -tlnp on my machine shows:
Code:
tcp 0 0 :::22 :::* LISTEN 31622/sshd
View 9 Replies
View Related
Mar 19, 2010
I am trying to enable DHCP so that it will give out IP's to some XP boxes when they boot. I have had success doing it dynamically, but not statically using the host declaration.
host xpTest {
hardware ethernet 00:50:56:2A:3B:00;
fixed-address 192.168.100.2;
}
My question is, what should the subnet declaration be if I only want to hand out static IP's like this? Also, the host is the same name that is specified in /etc/hosts correct?
View 3 Replies
View Related
May 5, 2010
I'm running openSUSE 11.2 (Linux piura 2.6.31.12-0.2-desktop #1 SMP PREEMPT 2010-03-16 21:25:39 +0100 x86_64 x86_64 x86_64 GNU/Linux) and have a network problem. At work, ethernet works fine. When I plug it into my DSL router at home (which works with other computers), I encounter the following behavior: ping can resolve host names, however, traceroute and Firefox and Thunderbird cannot.
It happens for both wired and wireless connections.
View 9 Replies
View Related
Dec 7, 2010
How I setup my NetworkManager to use the correct host name on my system, if that is possible. NetworkManager ignores the specified hostname and uses 'localhost', which is a bit annoying.
View 9 Replies
View Related
Oct 30, 2010
I just installed (n this 11.2 system) vmware server (v 2.02), to have access to a few small systems. One of them is a 11.1 guest which I just upgraded to 11.3, successfully (almost).
I have a problem, though: from the host I can not ping/ssh the guest.
Guest to host works fine (including names).
Code:
The firewall is down on both sides. I don't see anything with iptraf in the guest. The IP addres of the guest is correct, unless I'm too tired to see.
Why?
Code:
View 9 Replies
View Related
Jan 27, 2009
The internal network is behind nat done by the PC Router.The TP Link is recieving wireless signal from outdoors and it has switching and basic routing capabilities. I'm using the PC router for better routing options.PC Router (or R for short) is a triple-booting machine - Linux, FreeBSD and Windows. It has two lan cards - external (ext_if) - 100Mbps Realtek 8139 and internal (int_if) - 1Gbps integrated Realtek 8169.The problem is that all traffic from R to the network is slow - about 5-20K, while the traffic in the oppoiste direction is all right - about 10MB that is fine for 100Mbps cables, NICs and switches. The problem persist no matter the OS the pc R is running.I've tried some debugging on the situation as follows:
- put another PC at the place of R - everything is fine. That exclude the possibility of damaged cables, RJ-45s, switches and etc.
- connected both of the NICs to the Internet while the internal network is being disconnected and they both work fine (no delays)
- traffic shaping is not running
- there is nothing in firewalls except NATing the internal network (and it is working fine). Actually these firewall rules have been operational for more than months and everything was fine untill a week or two ago.
- changed the internal NIC with another
- connected the internal network directly to the TP and all of the PCs are getting good network performance. Then connected the R machine to the TP as well and there was good performance between the internal network PCs and R.
- R has good performance to the TP. In fact everything has good performance directly to the TP (when not connecting trough R).
- the problem persist only between R and machines from the internal network.
View 2 Replies
View Related
Oct 31, 2010
On Linux Mint (Gnome) i used to go to Network drive. that is on the right hand side of Nautilus there is a short cut for Network. in there i could see my network hard drive and other laptops connected to the network, and i could access my files. but on OpenSuse, when i open the network folder, nothing comes up. may be it needs some sort of configuration.
View 2 Replies
View Related
Apr 15, 2010
I need some advice about virtual hosting on opensuse 11.1. I have about 6 domains running on the server. I use Webmin and Virtualmin on my server. Everything is working ok but I feel that I do something wrong
1. Lets say I have [URL] web and mail server running. When I write [URL] on my browser, the site is coming up but when I also write [URL] and I see the same page. There is no record on apache for [URL], there is only DNS record for the mail server. What do I do wrong?
2. Apache conf. is as below; do you think is it better to write "any" on address section instead of ip? What is the difference?
Address 88.11.11.111 (ip isn't true) Port 80Server Name domainname.com Document Root /srv/www/domainname.com/public_html
3. IP Address is the same for all domains. How I can configure that; when I write the ip address on my browser, only the specific site which I choose will be opened? Whichever I created last, that site is opening right now.
View 4 Replies
View Related
May 24, 2010
How do I find out the network usage ie the total amount of data is transferred in or out of my computer (openSUSE 11.2 and gnome) and keep a track of the total network usage?
View 1 Replies
View Related
Aug 10, 2010
I just installed Debian 5.0 onto my laptop (Dell e6410) and it appears to boot and run fine, except that it does not recognize the network card (it did not do so during the installation). It also does not seem to recognize the wireless card.I have an ethernet connection, but running ifconfig displays only the local connection.I have tried adding -nomodeset and -noacpi to the boot menu, but that does not seem to change things
View 9 Replies
View Related
Aug 29, 2010
I'm having an issue with my wireless router not being recognized in Ubuntu Netbook Remix. When I boot into it, it won't display my network. The funny thing is that my neighbor's network is recognized just fine.
Also, I can discover and connect perfectly fine in Windows 7, just not in Ubuntu. This is the only thing holding me back from installing it and diving in.
Edit: My netbook is a Lenovo Thinkpad X100e, if that makes any difference.
View 6 Replies
View Related
Jan 1, 2011
I installed fedora 14 on a server appliance . After that , i decided to change the hardware , but now i have a problem !!! Fedora 14 on new appliance can not recognize network interfaces (eth*).
View 3 Replies
View Related
Jul 7, 2011
I have a desktop and a laptop connected by ssh (Places>Connect to Server). This works OK for file sharing but the laptop does not recognize the 2 printers attached to the desktop machine. As I understand (??) it, if the 2 printers are set up as 'shared' in CUPS (as they are on the desktop) then they should be recognized by the other machine on the network. But this is not happening. Is this the right way to network printers?
View 3 Replies
View Related
Feb 9, 2010
I have two D-Link network cards installed in my computer. The Ubuntu 10.04a2 installer seemed to recognize only one of them, though I know both are functional. I plugged a CAT5 cable in here, connected to my home network (with Internet). The installer proceeded happily, configuring DHCP and synchronizing clocks. However, when I rebooted after its completion, Ubuntu didn't recognize that I was connected to the network. I re-jiggled the RJ-45 connector, to no avail. When I run "System Testing," it does list both network cards during the Network suite, one being D-Link, and the other "James Bond" or something. So, what gives?
View 2 Replies
View Related
Jun 17, 2009
I've been at this mess pardon my french for a few hours and i'm still going nowhere, original thread posted over at archlinux forums:Since my printer isn't visible on my server (works just fine on my client) I tried to manually add various URI (tried em all) and I went from "printer location not found, waiting for jobs, to printer isnt running".
In my opinion it should be working but it's not, i've read the linux printer database/various linux forums/#cups on freenode (idled for 2 days no response)/gentoo wiki/forums and the old tool "google" but most of the "hacks" I tried didn't work.There's a lot of google links with issues similars to my own and alas they are all unresolved, is this a typical problem with unix/CUPS over servers/network?Why is it so difficult for CUPS to detect my printer over my server?
View 5 Replies
View Related
Jan 3, 2011
When I try to connect to a new network it keeps trying to use the name of the last network I connected to. This has just started happening in the last two months.
View 9 Replies
View Related
