OpenSUSE Network :: Can't Identify Wireless Chipset
Jan 18, 2010
I have a HP Pavilion dv2000 and can not figure out what chipset I have.
/sbin/lspci brings up the following
bunnyman@linux-bqo4:~> /sbin/lspci
00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 0c)
[Code]....
where I can get the .inf file from? I took windows completely off of the computer and dont want to reinstall it just to get the driver.
View 9 Replies
ADVERTISEMENT
Feb 7, 2009
I have an intel 5300 wireless chipset which is not supported in kernel 2.6.25. I am currently using opensuse 11.0, I downgraded from 11.1 since I faced so many other problems. can I setup my wireless driver under kernel 2.6.25? if so, how could i do this?
View 7 Replies
View Related
Jun 16, 2011
Perhaps this is sheer ignorance, but i just cant figure out which wireless chipset i´ve got. Its irrelevant to say that my wireless conection doesn´t authenticate (repeating the process without end). So this is the output of lspci:
linux-wghx:~ # lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge)
[Code].....
View 2 Replies
View Related
Sep 14, 2011
I have the above mentioned USB Wifi Dongle Bus 002 Device 003: ID 148f:3072 Ralink Technology, Corp. RT3072 Wireless Adapter It works extremely well using the KDE network manager but just will not connect using ifup traditional method through yast.
Initially it was using the RT2870 driver but this only gave wirelessg speeds (and still no ifup) but after blacklisting RT2780 and using RT5370sta driver draftn speed was achieved using KDE network manager however I still could not connect through ifup. The dongle scans and sees networks using ifup but will just not connect properly (NB security WPA2-AES).
View 9 Replies
View Related
Mar 23, 2010
When i click the button to connect to a wireless network this message apears:Network management disabled
View 1 Replies
View Related
Dec 8, 2010
In my YaST Network Settings (11.3), I see an entry labelled "Unknown Network Device" how to remove the confusion? The Overview tab also correctly lists my three known network devices (listed below), as does the Hardware Information utility. This is the output of lspci, and as far as I can tell, is accurate and complete. So what has YaST seen that it can't identify?
Code:
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 11)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 11)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI [Code].....
View 7 Replies
View Related
May 13, 2010
I can't use my wireless card in slack 13.1 (slack64-current). Looking at the dmesg output I saw that the firmware was missing, so I download it from ralink website.After this I was able to up it with ifconfig. I also was able to see my network with wicd, but after connection I can only transfer very few packets and network becomes unresponsive, no traffic.In slack64 13.0 this same card works fine. I don't even need to install a firmware. how I can make this work in slackware64-current?
View 6 Replies
View Related
Mar 25, 2010
Does the rt61 dlink wifi adapter work with slackware 13?
Code:
View 4 Replies
View Related
Jun 21, 2010
It looks like my laptop's wireless chipset (Broadcom) has/is dying. It won't work anymore on my Lucid install whereas it was working perfectly. The warrenty is long expired.
lspci brings up nothing about it anymore, it once did.
I booted my laptop into Win7 and it no longer finds it either. The manual slider switch on my HP Pavillion dv6000 is in the on position but the light is yellow.
It will very rarely work on Win7 now.
I can't afford a new laptop just now so it looks like I need an external wireless adaptor. I have (open busses) USB, cardbus/54, and a small firewire port. It does not pcmcia or other busses.
Any particular chipsets to look for or avoid?
View 4 Replies
View Related
Mar 23, 2011
How do you find one that runs in USB and how do you find it when it runs from a pci port. i already know that you might be able to find the kind of driver that is required to run the device
Lots of people have accomplished this by using aircrack but some operating systems can't install aircrack (not to mention that the use of some software is illegal depending on where you live) so i want an alternative.
View 1 Replies
View Related
Jun 7, 2011
I am getting ready to buy a wireless N adapter for my computer but I want to make sure its natively supported. I don't want to have to use ndiswrapper or manufacturer supplied drivers. I have been looking on newegg and I think I have narrowed it down to two choices. One has the Atheros AR9285 chipet and the other has the Realtek RTL8188RE chipset. I am fairly certain that the Atheros is natively supported since according to the newegg reviews it is. However the Realtek one is cheaper but I can't seem to find any information on whether or not its supported.
View 1 Replies
View Related
Sep 2, 2010
I was wondering if anyone might know of good reference material, books websites etc., that discuss network security issues in layman terms. I would like to set up a dedicated Linux box as a firewall and would like to have a deeper understanding of the different types of configurations that are possible. I run a dual boot system and most of the firewalls I have used on the Windows side are very confusing to me. A lot of the time they give you a pop up that informs you that some cryptically named program is trying to access the network or the internet and wants to know if I want it to or not, 99% of the time I have not idea if it is a legitimate program or not. I realize that this is probably a separate issue (knowing how to identify programs and processes that should have access from those that should not) from setting up a firewall and basic network security but I know that they are related.
View 3 Replies
View Related
Jun 10, 2009
have two internet lines from two isp every one pluged to interface eth0 and eth1 and i have eth2 interface to internel network clients now i need to make some clients to use line 1 and other use line 2 i want make this without use netmask , just for selected IP.
View 1 Replies
View Related
Jul 13, 2010
I'm running Debian Lenny. I want to get a wireless card working. Spent ages trying to get my betgear WG111T wireless dongle to work with ndiswrapper with no luck so I'm going to fork out for a wireless card. I've googled extensively but haven't really found a satisfactory answer. Is there a wireless card/chipset that I can count on working fairly easily or even better out of the box with Lenny?
View 3 Replies
View Related
May 3, 2011
I regret updating to 11.04. It broke everything during the update. I cannot get the broadcom wireless chipset to work more than 10 seconds, No matter how much research I do here. I have not been able to work within my GDocs for the last three days. Can I restore back to my 10.10 settings? I have an acer laptop.
View 3 Replies
View Related
Jun 15, 2010
How do Linux identify the eth0, eth1, eth2 interfaces. For instance I plug in a network cable in to an interface. How do Linux recognize the plug in interface is eth0 or eth1?
View 1 Replies
View Related
Apr 17, 2010
at start, knetworkmanager detect wireless network, but doesn't automatically connect - I have to restart it to make it work properly. Instead, it gives that error:
[Code]...
View 2 Replies
View Related
Jun 29, 2010
No wireless networks detected with AR5001 chipset
View 1 Replies
View Related
Aug 18, 2010
this is my first attempt to get into Linux (10.04 Lucid Lynx), and I'm eager to learn. The problem is however that i can't connect to the internet using my USB wifi dongle (Jensen 25150). I've tried what this link says:I've tried to blacklist rt2800usb, rt2x00lib, rt2x00usb and rt2870sta and to load "/etc/modules/rt3070sta", but no luck in that, so I simply do not know what to do next. Perhaps I haven't blacklisted them the right way? I've typed in the commands and saved Gedit and closed it. Is that the right way?
View 2 Replies
View Related
Nov 5, 2010
Out of curiosity, in linux, how do we check:
- The make/type of ethernet card
- The wireless chipset
- The video card
Used in a computer?
View 3 Replies
View Related
Apr 13, 2010
On Opensuse 11.2, I would like to connect my ipod touch to a wireless ad-hoc network of my laptop. I have no wireless WIFI-router at home, so I have to use the laptop as a router to the internet. I know I have to enter a static IP adres and my router's address, but where ? I haven't found any place under network tools to do this, only saw some fields with SSID's and MAC addresses to fill in.
View 5 Replies
View Related
Sep 30, 2010
I've got openSUSE 11.3 running via liveUSB on a netbook and no matter how many times I try, I cannot get wireless to connect to my network.
My network is:
- non-broadcast
- WPA2 Personal
- G
The netbook is fairly recent from Asus and wireless works perfectly with Fedora 11 and Windows XP.
View 5 Replies
View Related
Oct 27, 2010
1 ) make and model of wireless device Athreos 5k
2 ) driver version in use dont know
3 ) any error message. -
abhishek:/ # sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a
Flags: bus master, fast devsel, latency 0, IRQ 23
Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
[code]....
View 9 Replies
View Related
Apr 8, 2010
I clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
View 1 Replies
View Related
Apr 23, 2011
I own an ASUS N61JV-X2 notebook PC. It has an Atheros Communication, Inc. AR9285 Wireless Network Adapter. 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 0280: 168c:002b (rev 01) I cannot see any SSIDs including my home Verizon FiOS 802.11 G WPA2-AES-TKIP encrypted network. I went to Starbucks to try to connect to their free Wi-Fi and I could not make a connection. How do I solve this problem so that I can connect to a SSID of my choice and make a wireless connection while using GNOME 3?
View 2 Replies
View Related
Nov 5, 2010
I'm moving from other distros. and I'm currently loving openSUSE and I'm probably going to stick with it for a long time.I have already googled for this, but I found no solution, but I figured this should be a common problem... Does google searches inside this forum?Now... for my problem, whenever I hibernate (suspend to disk) or sleep (suspend to ram) I can't resume my wireless connection nor connect to another.I don't know if this is an issue if I use cables, because I simply don't with my netbook:The hardware in question is an ASUS 1005HA eee pc, running openSUSE version is 11.3 fully updated. Didn't mess with wireless connections, nor kernel or hibernate settings
View 9 Replies
View Related
Jun 24, 2011
I am trying to configure a wireless connection from YAST under the Network Settings tool.It doesn't seem to do anything. My USB wifi device is detected in YAST > Hardware and I am using the module it says Hardware is using. It doesn't seem to save the module under YAST> Network Settings> Network Card Setup. Is this tool broken or useless? It seems setting up WiFi should be easier than this. YAST should work shouldn't it?
View 9 Replies
View Related
Jun 20, 2010
I'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies
View Related
Mar 10, 2011
After installing 11.4, I need to type in the command to update the firmware for a broadcom wifi adapter. Then I needed to reboot, twice, before the system knew to use the adapter (where the adapter wifi light goes from orange to blue).
Then I needed to add my wireless network and type in my key. But the key does not take. If I click on my wireless network icon, it just re-asks for the key and does not connect nor give any other message. Network icon continues to display no connection.
So I need to reboot again.
When the system starts again, the adapter is blue, I click on the icon for my wifi network and it connects without asking for my key and I can then set to start my wifi by default.
Now my wifi works fine.
View 1 Replies
View Related
Apr 4, 2010
I recently installed OpenSUSE 11.2 and everything works fine except wi-fi card, of course. The problem is that after installation the system recognized the card (is was listed in network devices in Yast) but I was unable to enable it through network-manager applet. Though the device could make scanning through terminal (found article in docs but didn't fully understand wpa_gui). Then i was stupid enough to delete the device from Yast list to try to reinstall it. So the problem is that i simply can't do this cause i see no way to re-detect. That is the goal is to at least turn back to post-install system state and try to enable wifi card again.
View 9 Replies
View Related
