OpenSUSE Network :: Browse When Using KVpnc And OpenVPN?

Mar 2, 2010

I use KVpnc and openVPN to connect to my desktop at work from my laptop at home. This works fine, I can reach my desktop at the office from my laptop at home. The only problem is that when the Vpn connection is active I cannot use a browser on my laptop. In fact, I cannot connect to anything outside the office Vpn (like mail, chat etc).

I suspected it had something to do with the DNS servers at the office not being reachable from the Vpn so I added my "regular" DNS servers to the /etc/resolve.conf used when the Vpn is active, I added two lines in total on the form "nameserver <ip-address>". This did not solve the problem. I have searched the KVpn forums without finding anything, and the same goes for the openSUSE forums. Does anybody else experience the same problem?

View 1 Replies


ADVERTISEMENT

OpenSUSE Wireless :: Build Up A Connection To A VPN Provider Using Profile Openvpn And Kvpnc?

May 8, 2010

Is there any way to run successfully umtsmon with kvpnc? Trying to build up a connection to a VPN provider using his profile openvpn and kvpnc. It connects as "low level connection" , the indicator of kvpnc remains red, but then kvpnc would not pass the network traffic through umts-mon (or better vice versa, umtsmon doesn't). In principle I would like to pass both interfaces (wireless, umts) through vpn.

View 4 Replies View Related

Ubuntu :: Kvpnc OpenVPN Can't Connect Keeps Timing Out

May 8, 2011

I ran the Kvpnc wizard and imported my config file and when I try to connect it always says connection timed out.I can connect to OpenVPN without a problem using the terminal, all I can say is kvpnc is a real pain and I don't get why I can't connect with it if I can connect without a problem from the terminal.I thought this was suppose to be a simple GUI that you just imported your config add in your cert and the cert path and that's all.

View 1 Replies View Related

Ubuntu Networking :: Network-manager-openvpn And Static-key OpenVPN Connection In 9.10

Apr 5, 2010

i have some problems with configuring openvpn tunnel connection to my openvpn server. I'm using static-key tcp connection. Network manager always said to me that connection could not be established. Also, when i try to run openvpn from terminal, i got some strange permissions problem:

Code:

openvpn --config config.ovpn
Mon Apr 5 15:48:37 2010 OpenVPN 2.1_rc19 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Oct 13 2009
Mon Apr 5 15:48:37 2010 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Mon Apr 5 15:48:37 2010 /usr/sbin/openvpn-vulnkey -q moj.key

[code]....

View 1 Replies View Related

OpenSUSE Network :: Cannot Browse Outside LAN - Illegal Request

Jan 12, 2010

Tomorrow I decided to dedicate 100% of my disk to opensuse! So I backed up the files from the remaining windows partition, deleted them and expanded the /home partition. Well, I ran into some problems during first boot. I referred to an article at the wiki and fixed it. Although I did some small fixing manually at the fstab file. The system booted! But I can't browse anywhere outside the local network! At this forum I found some info regarding the dmesg |tail command. Here is my output:

biduzido@biduNote:~> dmesg |tail
[ 1256.061852] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1256.061865] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 1256.061873] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 1256.061882] end_request: I/O error, dev sr0, sector 0
[ 1256.061890] Buffer I/O error on device sr0, logical block 0
[ 1256.062662] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1256.062672] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 1256.062682] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 1256.062690] end_request: I/O error, dev sr0, sector 0
[ 1256.062697] Buffer I/O error on device sr0, logical block 0

View 6 Replies View Related

OpenSUSE Network :: Use Skype But Can't Browse Pages With Firefox?

Nov 22, 2009

I have openSUSE 11.2 64-bit KDE, I have installed it with lan cable connected, install updates and than switch to wireless.Everything worked great until I went to my girlfreind with laptop, there I can connect to router, use Skype but can't browse pages with firefox, can't install packages with YAST Also wired connection gives the same result but her PC have no problem with Internet.I have traied ifup, deleting /etc/resolv/conf, disabling NetworManager routing options with no succes

View 9 Replies View Related

OpenSUSE Network :: IFUP - Connected Via HTTP But Cannot Browse

Apr 22, 2010

In Network Settings in OpenSuse 11.1 while using "Traditional Method with ifup" I am able to set up a box as a server and connect via http over the net BUT Firefox cannot browse. If I switch to "User Controlled with NetworkManager" I can run Firefox but my server is not contactable. How do I do both?

View 4 Replies View Related

OpenSUSE Network :: OpenVPN Server Setup?

Feb 22, 2010

We have installed "openVPN" from openSUSE 11.2 repo and "openVPN - webmin module" (GUI).What it needs to be done .. "Road Warriors" need to be able to access websites through openSUSE box sitting in the data center, from remote locations (hotel, coffe shops, wi-fi hot spots,..)We're half way there but it gets stucked somewhere with the IP's

View 6 Replies View Related

OpenSUSE Network :: Openvpn Broken After Upgrade To 11.1

Jul 6, 2010

after I upgraded my SUSE 11.0 to 11.1 many problemes solved themselves. But now there is a new one.

I use openvpn, which always used to work without problems. After upgrading to SUSE 11.1 there is the error message:

"/etc/openvpn/client-suse.sh: line 7: modify_resolvconf: command not found
Wed Jul 7 00:11:38 2010 script failed: could not execute shell command"

The shell script is as follows:

Code:
#!/bin/sh
UPORDOWN=$1
DEV=$2
case $UPORDOWN in
up)
modify_resolvconf modify -s openvpn -p openvpn -t OpenVPN

[Code]....

View 4 Replies View Related

OpenSUSE Network :: Allow Openvpn Service In Firewall?

Jul 13, 2010

I can't get my openvpn work if the firewall is on , and I also don't see any option to allow openvpn service in firewall allow service.

View 1 Replies View Related

OpenSUSE Network :: 11.3 And Openvpn Connection Hangs

Aug 6, 2010

I have freshly installed OpenSUSE 11.3 64 bit and reimported my old openvpn connections via Network Manager. Connection can be established fine, but after 3 to 6 seconds (pings) it will stop to receive any packets on the tun device.

I tried disabling the firewall, starting openvpn manually, no avail. I checked the message log and the openvpn output, no messages recorded.

View 1 Replies View Related

OpenSUSE Network :: Windows Remote Desktop Over OPENVPN?

Feb 27, 2010

I have OpenVPN 2.0.8 installed configured to Ethernet Bridge BR0. All windows outside machines can "see" and mount remote inside firewalled machines (i.e. \machine1 or [URL]). However I can't access to inside windows machines with windows Remote Desktop

View 3 Replies View Related

OpenSUSE Network :: Can't Browse Internet At University / Works Fine In Windows

Mar 30, 2011

I'm not able to connect to my university's internet facilities under openSUSE 11.4. I have been able to connect in the past and I am still able to connect in Windows 7.When I try to connect to the university WiFi, a valid IP address is assigned to me and the gateway address appears to be correct, so I don't see a problem in the DHCP negotations. Same with my university's Ethernet: I get a valid IP address, but I can't connect to the internet.When I browse to any site with Chromium/Chrome/ Firefox/lynx/curl, the page is stuck at "Sending request". I have tried disabling my firewall - that didn't solve anything.I don't know what else I can try and the campus' network administrators are puzzled. How can I resolve my issue?

View 7 Replies View Related

OpenSUSE Network :: OpenVPN - Permission Denied For Vars Command

Mar 30, 2010

I did some reading on Openvpn and am following some instructions I found @ Install & Configure OpenVPN SSL VPN in SUSE & openSUSE Linux | SUSE & openSUSE

I keep getting the same error message when I run the . ./vars command
"NOTE: If you run ./clean-all, I will be doing a rm -rf on /etc/openvpn/easy-rsa/2.0/keys"

But when I run ../vars I get
"Bash: ../vars: Permission denied"

View 1 Replies View Related

OpenSUSE Network :: SUSEFirewall Blocking OpenVPN Traffic - How Can Configure To Allow

Nov 17, 2010

I have a remote network that I manage consisting of a DLink DFL-210 firewall/router, and behind that a Dell server running openSUSE 11.2 and a collection of Windows XP/Vista/7 computers.

The Linux box is running OpenVPN as a server (that is how I connect to this network) and a client (it connects to a second server - running XP - at a different location).

The DLink router is the DHCP server and provides addresses on the 192.168.51.0/24 network. The OpenVPN server provides the 10.8.51.0/24 address range.

The remote network that the Linux box connects to is 192.168.54.0/24 via the OpenVPN network 10.8.54.0/24.

I have added routes to the DLink router to route all traffic to the 10.8.51.0/24 and 192.168.54.0/24 networks to the Linux box.

With SUSEFirewall turned off, after I have connected via OpenVPN from my remote computer I can ping all active 192.168.51.0/24 addresses. Other computers on the 192.168.51.0/24 network can ping computers on the 192.168.54.0/24 network. But if I turn on SUSEFirewall, neither of these work. However, I can ping 10.8.54.1 from any computer on the 192.168.51.0/24 network.

How can I set up SUSEFirewall to allow these networks to communicate with eachother?

View 5 Replies View Related

Fedora :: Nautilus Can't Browse Network

Dec 11, 2010

if I click on Network in the side bar I get Could not display "network:///" Nautilus cannot handle "network" locations.so how do I browse the "samba" network? why doesn't this work out of the box?

View 13 Replies View Related

Fedora :: Unable To Browse Network

Jul 4, 2011

I just installed FC15 from scratch, and everything seems to be working OK, except that I cannot view other computers on my local network. I didn't have any problems when I was running FC13.I am able to get on the internet, and view the website I configured on this machine, but anything "network" related I cannot see.But now when I open Network, I am presented with MYGROUP, WORKGROUP, and my domain name (which is my actual "workgroup" as I don't have a domain). I cannot get to any of them - get the same timeout error as above.

View 10 Replies View Related

Debian Configuration :: Unable To Browse Network

Dec 16, 2015

When in Thundar (on XFCE - Debian 8.2) and I click the "Network" icon in the left sidebar the following message is displayed.

Failed to open "/ on". Specified location is not supported.

View 4 Replies View Related

Ubuntu Installation :: Installed 9.10 Now Not Able To Browse Network

Jan 13, 2010

I had a 9.04 install that was working well within the network. I had a lot of shares setup from a windows 2003 server. Unfortunately, I had a hardware failure and had to upgrade. Also unfortunately, 9.04 would not install on the new hardware (MB/CPU/RAM), but I was able to install 9.10.Now my problem is I can not browse the windows network. I installed samba and followed the instructions found here

When I go to network through nautilus, I see a windows network icon, when I open it, there is nothing.I am at a loss and really need this problem resolved (work production computer)

View 1 Replies View Related

Ubuntu Networking :: How To Browse Windows Network

Mar 2, 2010

Ubuntu 9.10 now, before 9.04 was installed. On both versions I was unable to browse windows network - when I visit corresponding icon in nautilus, I see error message:
??????-???? -- ???????????? ??????.png
Looks like some service was missed at startup and not running.

View 5 Replies View Related

Networking :: Cannot Browse Network From Ubuntu / Resolve This?

May 23, 2010

I cannot browse the network from Ubuntu, but I can see the ubuntu machines from the windows including file and printing.
Nautilus gives the following error:
Could not display "network:///".
Nautilus cannot handle "network" locations.

Workgroup names all set the same
Sharing allowed on all machines

I have read all of the postings on this I think and have not been able to implement a solution.

View 6 Replies View Related

Ubuntu :: Browse Windows Network Directories?

Mar 26, 2011

Though File Manager allows me to browse Windows network directories ( Ctrl-L shows a path like smb://diskstation/mikeother/Web/Alta_Vista ), I can't figure out how to browse to them in applications like Firefox, which doesn't show "Network" as an option when doing File > Open. How can I browse to the Windows network within FF?

View 9 Replies View Related

Ubuntu :: Can't Browse Windows Network With Nautilus

Dec 16, 2010

Suddenly having trouble browsing the Windows Network with Nautilus.I can still mount a windows/samba share with cifs, but I don't want to do this because symbolic links within in the share do not work correctly. I can still browse the share with smb:// in a web browser.

View 1 Replies View Related

Ubuntu :: Netbook Edition - How To Browse Network

May 1, 2010

How to browse the network with Ubuntu Netbook Edition? In the destop edition I just go to 'Places - Network' and I'm good to go, but for the life of me I can't find anything that will allow me to do this in the netbook edition.

View 1 Replies View Related

Server :: Run 2nd Tun Network For Openvpn?

Jul 29, 2010

I need to run a 2nd instance of openvpn on my server so that it can run on udp. The current one runs on tcp and I need to keep that running. Apparently, I need to create a 2nd tun network for it to use - how can I do that? I tried starting a 2nd instance of openvpn but it just seems to hang.

View 1 Replies View Related

Fedora Networking :: Connect The Network Where The Openvpn Client Is,throught The Computer With The Client To The Other Network?

May 20, 2009

I have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface

View 2 Replies View Related

Debian :: Thunar Doesn't Browse Local Network

Apr 2, 2016

I've configured Debian 8.3 on AMD quad cores Opteron, for change, i've choise XFCE4. The desktop work fine, but thunar doesn't browse my local network, i cannot see my other computer ! I think there are missing an applet ? but whitch it ?

View 2 Replies View Related

Debian :: Browse Network Not Working - The Specified Location Is Not Supported

May 25, 2015

Every time i try to click it, in the file manager, I get the error failed to open "/ on" The specified location is not supported.

I need to be able to connect to my storage server...

View 2 Replies View Related

Debian Configuration :: Cannot Browse Web When Network Eth1 Is Enabled?

Mar 30, 2010

Like the forum for #1I'm using debian 5.0 with a modem to connect to the internetand eth1 to network my home computers. When I try to browse the internet with Konqueror, I have to disable eth1 then wvdial just to browse the internet. How do I fix this?Note: My resolv.conf has my primary DNS address in it, for my ISP (nameserver 67.211.172.29) and so on.

View 2 Replies View Related

Debian Configuration :: Nautilus Can't Browse Local Network

Apr 21, 2010

I have a new Debian 5.04/ppc install on a G5 tower and it's not able to browse the local network. The clean install could see the network, then I installed the Samba server, and it hasn't worked since. Samba server never really worked, and I'm guessing I messed something up. I've reinstalled network-manager, and removed / reinstalled samba.

I have a small home network (6 machines) running wired and/or wireless, pc/mac and linux.This machine can PING other machines by name and IP address.This machine can PING itself by name and IP address
Other machines can PING this machine by IP address only, not by name.Nautilus network browser only shows the "Windows Network" icon, which, when clicked, shows an empty window.I've got networking up fine on all my other machines but this one is stumping me.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved