Ubuntu :: Kvpnc OpenVPN Can't Connect Keeps Timing Out
May 8, 2011
I ran the Kvpnc wizard and imported my config file and when I try to connect it always says connection timed out.I can connect to OpenVPN without a problem using the terminal, all I can say is kvpnc is a real pain and I don't get why I can't connect with it if I can connect without a problem from the terminal.I thought this was suppose to be a simple GUI that you just imported your config add in your cert and the cert path and that's all.
View 1 Replies
ADVERTISEMENT
Mar 2, 2010
I use KVpnc and openVPN to connect to my desktop at work from my laptop at home. This works fine, I can reach my desktop at the office from my laptop at home. The only problem is that when the Vpn connection is active I cannot use a browser on my laptop. In fact, I cannot connect to anything outside the office Vpn (like mail, chat etc).
I suspected it had something to do with the DNS servers at the office not being reachable from the Vpn so I added my "regular" DNS servers to the /etc/resolve.conf used when the Vpn is active, I added two lines in total on the form "nameserver <ip-address>". This did not solve the problem. I have searched the KVpn forums without finding anything, and the same goes for the openSUSE forums. Does anybody else experience the same problem?
View 1 Replies
View Related
May 8, 2010
Is there any way to run successfully umtsmon with kvpnc? Trying to build up a connection to a VPN provider using his profile openvpn and kvpnc. It connects as "low level connection" , the indicator of kvpnc remains red, but then kvpnc would not pass the network traffic through umts-mon (or better vice versa, umtsmon doesn't). In principle I would like to pass both interfaces (wireless, umts) through vpn.
View 4 Replies
View Related
Apr 26, 2010
We use Openvpn for remote access to the office network. It would be nice to keep this running and automatically connect to the office at all times.Once started, it does this anyway. The problem lies when the user comes into the office. Openvpn connects as usual to the vpn gateway, but this causes weird routing loops.Is there a way to say to Openvpn "Always connect to the gateway unless you are on network 10.10.10.0/24" ?
View 2 Replies
View Related
Oct 20, 2015
I try to establish basic connection between my 2 end systems using openvpn. The problem is when i move the client files to my laptop i cant even ping the server from there. I copy paste the server commands in section 4 [URL] ....
In the client i ran the first command and changing VPNSERVER IP with 10.9.8.1 and LOCALGATEWAY IP with 192.168.1.1
which i thought that whats the server use : ROUTE_GATEWAY 192.168.1.1/255.255.255.0 in the server initialization process
The second command produce error device tun0 not found and when i create one using openvpn --mktun --dev tun
I get RTNETLINK answers : network is unreachable
Note : I use wireless connection in the client system (laptop). The server works good and i could ping him ( from the same machine ) but cant ping him or access the vpn server in my laptop. I also use default openvpn settings...
View 3 Replies
View Related
Jun 12, 2011
I installed fedora15, My openvpn didn't connect to my working computer.I checked openvpn configure more time, but still don't connect,
View 11 Replies
View Related
Mar 7, 2011
I have installed an OpenVPN server on my OpenWrt 10.03 router [freshly flashed]:
[URL]
It seems "ok".
I connect my pc to the lan port of the router, and i want to try it out. I'm using Fedora 14 with GNOME. In the NetworkManager applet i set these things: this and this. Ok!. i try to connect, but it fails. Here are the logs: [URL]
one important thing: my routers [the one with the openvpn server] ip address is 192.168.1.2, and i didn't had to write it nowhere. so how could the networkmanager applet know the ip address of my openvpn server? i think this is the problem, but i just can't find where to write 192.168.1.2
p.s.: yes, i tried to google for: "No server certificate verification method has been enabled." but i didn't find a thing, and i'm trying for hours now... :
p.s.: if i [on the router]:
iptables -P INPUT ACCEPT
iptables -P FORWARD ACCEPT
iptables -P OUTPUT ACCEPT
[Code]....
View 1 Replies
View Related
Mar 2, 2010
i recently rent a VPS and installed with CENTOS 5 64bit, i followed a tutorial to install openVPN to bridge traffic to my windows machine.
View 3 Replies
View Related
Feb 15, 2010
I'm trying to connect OpenVPN server using shell command.
I've installed all needed packages (I guess)
if type
Code:
sudo openvpn client.ovpn
and i've got messages:
Code:
Mon Feb 15 12:29:25 2010 OpenVPN 2.1_rc19 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Oct 13 2009
[Code]....
but i can't see tap0 interface and cannot ping any address at remote location.
I tried this config file at Windows OpenVPN client and all works fine.
View 2 Replies
View Related
Jul 27, 2010
i have added a vpn connection on my Lucid desktop machine, but every time i try and connect, it fails. I also have the same, identical vpn connection on my karmic install on my laptop. everything works perfectly on Karmic, but Lucid is having problems. I have followed identical steps for creating the vpn connection on both machines: vpn connections can be made in 2 ways, the first is through the network manager, but trying to connect through the nm-applet returns an error about vpn failing to connect and "no valid vpn secrets".
I suspect this is at the root of the problem. The only way for my Lucid machine to successfully connect through the command line is if I run the openvpn command under sudo.
View 2 Replies
View Related
Sep 7, 2010
I have setup an OpenVPN server on Ubuntu server. I am able to connect with Windows clients. I am, however, unable to correctly connect using Ubuntu.
If the router firewall is blocking the pings to keep the connection alive, then the connection initially does not work, but will work after the first timeout and reconnect. If the firewall does not block the pings then the initial connection attempt never times and therefore the connection does not work.
Attached is the readout from the client.
The first attempt gives error ERROR: Linux route add command failed: external program exited with error status: 7
Successive attempts work, they just time out every two minutes.
View 1 Replies
View Related
Sep 28, 2010
I've been the las 4 days setting up my first VPN (OpenVPN bridged). The server is up and running OK but when I try to connect I've got this message in the client log.
Quote:
TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
TLS Error: TLS handshake failed
[Code].....
View 4 Replies
View Related
May 16, 2010
I an unable to connect to an openvpn connection in ubuntu karmic. I have installed openvpn , I added the user certificate, CA certificate , Private key and the conf file in the /etc/openvpn directory. Also followed the steps given here [URL]..community/OpenSSL under "Importing a Certificate into the System-Wide Certificate Authority Database" , but still when I try openvpn --config linux_client.conf I get the following error.
Mon May 10 21:58:57 2010 /usr/bin/openssl-vulnkey -q -b 2048 -m <modulus omitted>
Mon May 10 21:58:57 2010 LZO compression initialized
Mon May 10 21:58:57 2010 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Mon May 10 21:58:57 2010 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Mon May 10 21:58:57 2010 Local Options hash (VER=V4): '41690919'
[Code]...
View 5 Replies
View Related
Apr 14, 2010
I have a network that consists of a few desktop machines, laptops, and two Internet connected linux servers. The Linux servers are the gateways, routers, and firewalls for my desktop and laptop machines.Whenever I'm away from home; I can connect to my home machines over the Internet by first ssh'ng (technically I use Webmin; because my firewall on each Linux servers blocks ssh from the Internet.) to one of the linux servers and then ssh'ng to the desired machine on my home network.
This works fine for my home linux machines. But not my Windows machines.I'd like to be able to rdp or rdesktop to my Windows machines.Will OpenVPN allow me to accomplish this ?
View 14 Replies
View Related
Sep 15, 2010
I successfully installed openvpn and networkmanager openvpn plugin. Then I successfully added a PPTP vpn connection by networkmanager vpn tab which name is "vpn1". But now I don't know how to connect to this PPTP vpn connection. I tried bellow command but no luck.
openvpn --config vpn1.config
View 3 Replies
View Related
Sep 15, 2009
I'm trying to set up a VPN connection between our CentOS 5.3 server at work and my bosses XP computer at home. At this point, we are kinda locked into Quickbooks. I'm testing the connection from my XP boot at home to see if it works. I can log into our servicemanuals easily enough from XP at home however, the windows takes forever to update. I have the Samba server only listening on port 445 because is seems to work more efficiently at work. I connect to the Samba shares via linux from home and everything works well but, when I try to do anything with the shares from Windows client at home, it's very slow!
I'm thinking that it must have something either to do with the Windows OpenVPN client or the client.conf file. Is there anything I should look at in the .conf file for answers?
View 1 Replies
View Related
Apr 5, 2010
i have some problems with configuring openvpn tunnel connection to my openvpn server. I'm using static-key tcp connection. Network manager always said to me that connection could not be established. Also, when i try to run openvpn from terminal, i got some strange permissions problem:
Code:
openvpn --config config.ovpn
Mon Apr 5 15:48:37 2010 OpenVPN 2.1_rc19 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Oct 13 2009
Mon Apr 5 15:48:37 2010 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Mon Apr 5 15:48:37 2010 /usr/sbin/openvpn-vulnkey -q moj.key
[code]....
View 1 Replies
View Related
Mar 13, 2011
I'm getting a timeout error from NetworkManager when attempting to connect to my router/firewall.
Excerpt from /var/log/messages attached.
View 1 Replies
View Related
Jun 7, 2011
I try to connect to my server (whose IP is x.x.x.x below) from my laptop. I have no idea why openvpn client won't work this time. It works fine in win7 before. I re-installed openvpn but it doesn't work neither. Then I searched for this issue, find that it is possibly caused by disabled DHCP Client service. I checked, and found it was enabled. Still won't work after restarting dhcp client service.
Basic Info:
OS: Windows 7
OpenVPN client: openvpn-2.2.0
DHCP Client Service started.
The following is the log during connecting:
Code:
Wed Jun 08 01:55:16 2011 OpenVPN 2.2.0 Win32-MSVC++ [SSL] [LZO2] built on Apr 26 2011
Wed Jun 08 01:55:16 2011 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port.
Wed Jun 08 01:55:16 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
Wed Jun 08 01:55:16 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
[Code]....
View 1 Replies
View Related
Apr 3, 2010
I'm trying to setup OpenVPN in order to connect back to my home network while traveling for secure browsing and such. However, before I can even start trying to set that up I tried to see if I could open port check my computer through the net. And I'm having a hard time doing that.
As far as I can tell, here are my roadblocks:
1. Is ISP (Qwest) blocking my ports?
2. Is my modem doing the proper port forwarding and firewall?
3. Is my router doing the same?
4. Is my firewall on the computer allowing the request?
To minimize sources of error, I've turned off my local and router firewall and setup my router to forward ports. I'm not to familiar with my modem, but I'm pretty sure that the firewall is turned off by default and I think I've done port-forwarding correctly. But still no success when doing an open port check. At this point I don't know how to diagnose the problem.
View 2 Replies
View Related
Nov 8, 2010
Since upgrading to 10.10, I am having some difficulties with KVPNC. It used to work well. It seems to disconnect after precisely 4min 15 seconds. The log from the window is shown below with the sensitive bits redacted.
Code:
info: Reconnect after connection lost enabled, reconnecting...
debug: vpnc: /usr/sbin/vpnc
info: Gateway hostname (<redacted>) resolved to "<redacted>".
debug: vpnc version (major): "0"
debug: vpnc version (minor): "5"
[Code]...
View 4 Replies
View Related
Nov 17, 2010
Title really says all, I installed KVPNC in Ubuntu 10.10 but I can't use it. It keeps crashing on startup. Who can help me out with this?
View 6 Replies
View Related
Jun 10, 2011
When I KVpnc into a client VPN I connect, but every 4 minutes, or so, I am reconnected. Since I'm RDPing into their server remmina (and rdesktop too) loose their mind and I have to manually reconnect to the server. The attachment Screenshot-8a.png shows the display KVpnc uses to describe this when it happens. /var/log/syslog shows it happening twice here:
Code:
Jun 10 08:47:19 RyCycle avahi-daemon[797]: Withdrawing workstation service for tun0.
Jun 10 08:47:19 RyCycle NetworkManager[795]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/tun0, iface: tun0)
Jun 10 08:47:21 RyCycle NetworkManager[795]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/tun0, iface: tun0)
[code]....
View 6 Replies
View Related
Aug 9, 2010
i have installed openvpn and config it for a tunnel. my server.conf and client,conf is as follow:
server.conf
port 1194
proto udp
[code]...
View 1 Replies
View Related
Feb 13, 2010
I want to configure a VPN over the Internet.I installed the 'openvpn' package, generated the key file, transfered it by a secure way to the client, and setted up the configuration file.
So, in that configuration file I input the IP addresses of the tunneled interfaces. Both IPs are static in the tunnel.
Then, I've heard somewhere that I can assign a dynamic configuration IP for the client. I do this registering a range.
Well, when I tried to change static IP to dynamic IP (changing '192.168.0.2' to '192.168.0.0/24') in the configuration file, the OpenVPN didn't work.
Obviously I don't know what I'm doing, and I really, don't believe that simply changing the IP will make it work, but I tried.
I hope I explained my problem as well.
My configuration file:
# OpenVPN Server Configuration File
dev tun 0
ifconfig 192.168.0.1 192.168.0.2
cd /etc/openvpn
secret key_file
In client I execute the 'openvpn' without the '--daemon' parameter.Then I want that my client uses a IP in a range (192.168.0.0/24, for example), instead of a static IP (192.168.0.2).I also thought to use a DHCP server, but I'm not sure that will work.
View 6 Replies
View Related
Feb 4, 2010
I am using KVPNC (recommended by the VPN owner) on Ubuntu 9.10 using my Universities direct Ethernet connection.
I have downloaded all the .ovpn scripts to a directory. I have downloaded KVPNC from the repository (apparently for 9.10 you do not download from the KVPNC website).
I then use sudo kvpnc and select a server (since there are many based on the .ovpn files).I click connect and the script works and tells me I have a connection. See below for an example. All appears to work.
But when I actually load any Internet program e.g. Firefox it cannot find a website.This happens for all servers which have different locations around the world.When I disconnect KVPNC I still have no access. I have to remove the Ethernet cable before it works again.
debug: Connect try requested, profile: Stockholm, type: OpenVPN
debug: openvpn: /usr/sbin/openvpn
debug: Support for TUN/TAP found (compiled into kernel or kernel module already loaded).
debug: Default interface: "eth0".
debug: IP address of default interface: "my IP address".
code....
I realise there are errors e.g. the /etc/resolv.conf must be a symlink but have tried doing this and still have exactly the same issues.
View 2 Replies
View Related
Mar 9, 2010
I set up an ssh server and configured port forwarding on my router so that I can access the ssh server from the internet. This is working fine, also from within the LAN.
Additionally this machine should be connected to an VPN Server on the internet. Again, this is working. I get connected, the tun interface is coming up, etc.
The moment the VPN Connection is established I can not connect to the SSH Server anymore from the internet, LAN ist still working fine. I guess it has something to do with the route that is set by the VPN Connection?!
So my question is, what do I have to do to reach the ssh server from the internet while the ssh server is connected to an VPN Server itself.
ifconfig without VPN
Code:
eth0 Link encap:Ethernet HWaddr 00:1c:c0:c4:df:80
inet addr:192.168.2.10 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::21c:c0ff:fec4:df80/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]....
View 1 Replies
View Related
Apr 28, 2011
I was using KVpnc from 10.04 and today I upgraded to 11.04, however I am facing a lot of issues, here are a few
1. The minimized KVpnc disappears after connect, no clue where it goes, the other go to Unity Side Bar.
2. Once connected since I cannot see it, how do I disconnect it? I tried opening it from applications again, this time around it says it cannot resolve my VPN server.
3. I see multiple instances of KVpnc running when I do a ps -ef
View 1 Replies
View Related
Apr 26, 2010
What client can I use on a MAC to connect to an openvpn server?
All the client s seem to use password connections whereas the openvpn server uses certificates.
View 3 Replies
View Related
Jan 1, 2010
I am having, just installed a fresh 9.10. The only thing I did was an update and installed the wireless drivers. Well i went to to download my favorite browser Opera and firefox just times out. I can get to other websites just fine so far. Though it looks like Office Depot won't let me in either. If I boot into Windows I can connect to either site just fine.
View 2 Replies
View Related
