OpenSUSE Network :: Cannot Browse Outside LAN - Illegal Request

Jan 12, 2010

Tomorrow I decided to dedicate 100% of my disk to opensuse! So I backed up the files from the remaining windows partition, deleted them and expanded the /home partition. Well, I ran into some problems during first boot. I referred to an article at the wiki and fixed it. Although I did some small fixing manually at the fstab file. The system booted! But I can't browse anywhere outside the local network! At this forum I found some info regarding the dmesg |tail command. Here is my output:

biduzido@biduNote:~> dmesg |tail
[ 1256.061852] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1256.061865] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 1256.061873] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 1256.061882] end_request: I/O error, dev sr0, sector 0
[ 1256.061890] Buffer I/O error on device sr0, logical block 0
[ 1256.062662] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1256.062672] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 1256.062682] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 1256.062690] end_request: I/O error, dev sr0, sector 0
[ 1256.062697] Buffer I/O error on device sr0, logical block 0

View 6 Replies


ADVERTISEMENT

Ubuntu Servers :: (SDE) Sense Key - Illegal Request (Current)

Jan 3, 2011

I have an MD3000 storage attached to dell server via sas cables, running ubuntu server.
the kernel keeps throwing these messages every other second on the console, but the drives from MD are fully accessible.

Jan 3 12:04:24 node2 kernel: [71041.035822] sd 5:0:1:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Jan 3 12:04:24 node2 kernel: [71041.035828] sd 5:0:1:0: [sde] Sense Key : Illegal Request [current]
Jan 3 12:04:24 node2 kernel: [71041.035833] sd 5:0:1:0: [sde] <<vendor>> ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1

View 1 Replies View Related

OpenSUSE Network :: Firefox Buggy During Request?

Apr 19, 2010

I am experiencing real buggyness in firefox 3.6.3. Sometimes when I click on any button e.g. this form (submit new thread), I get no response whatsoever. It lacks that responsive feel. Might I mention that it happened some of the time. Its probably not because of the ISP because I didn't have any problem before when I was using Vista. Maybe it was because I meddled with things like this and tweaking some stuff in the about:config. I'm out of ideas.

Box: openSUSE 11.2 | GNOME 2.28.2 | Acer RS740DVF | AMD64 X2 5600+ | Radeon HD4670 | 3GB RAM

View 3 Replies View Related

OpenSUSE Network :: Browse When Using KVpnc And OpenVPN?

Mar 2, 2010

I use KVpnc and openVPN to connect to my desktop at work from my laptop at home. This works fine, I can reach my desktop at the office from my laptop at home. The only problem is that when the Vpn connection is active I cannot use a browser on my laptop. In fact, I cannot connect to anything outside the office Vpn (like mail, chat etc).

I suspected it had something to do with the DNS servers at the office not being reachable from the Vpn so I added my "regular" DNS servers to the /etc/resolve.conf used when the Vpn is active, I added two lines in total on the form "nameserver <ip-address>". This did not solve the problem. I have searched the KVpn forums without finding anything, and the same goes for the openSUSE forums. Does anybody else experience the same problem?

View 1 Replies View Related

OpenSUSE Network :: Use Skype But Can't Browse Pages With Firefox?

Nov 22, 2009

I have openSUSE 11.2 64-bit KDE, I have installed it with lan cable connected, install updates and than switch to wireless.Everything worked great until I went to my girlfreind with laptop, there I can connect to router, use Skype but can't browse pages with firefox, can't install packages with YAST Also wired connection gives the same result but her PC have no problem with Internet.I have traied ifup, deleting /etc/resolv/conf, disabling NetworManager routing options with no succes

View 9 Replies View Related

OpenSUSE Network :: IFUP - Connected Via HTTP But Cannot Browse

Apr 22, 2010

In Network Settings in OpenSuse 11.1 while using "Traditional Method with ifup" I am able to set up a box as a server and connect via http over the net BUT Firefox cannot browse. If I switch to "User Controlled with NetworkManager" I can run Firefox but my server is not contactable. How do I do both?

View 4 Replies View Related

OpenSUSE Network :: Apache Error Message - Request Without Hostname

May 4, 2010

Anyone know what this signifies in the Apache logs files:

Code:
[Tue May 04 20:56:06 2010] [error] [client *******] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 20:56:06 2010] [error] [client *********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)

View 2 Replies View Related

OpenSUSE Network :: 11.3 - Cannot Access Files From Laptop (Request Timed Out)

Jul 25, 2010

I'm running SUSE 11.3 on a Dell Inspiron 1501. I'm trying to network it with my Windows 7 and XP boxes. I've installed Samba, activated the services Samba needs and add myself as a Samba user. My problem is that I can see and access files on the laptop from both of my desktops running Windows, but when I try to access them from the laptop I get a message saying the server timed out whenever I try to access my workgroup.

View 8 Replies View Related

OpenSUSE Network :: Dhcpcd Not Sending DHCPDISCOVER/-REQUEST At Boot, Timing Out?

Aug 2, 2010

we have a problem with dhcpcd at boot time on any openSUSE version from 11.0 to 11.3. It seems that a number of workstations never send out DHCPDISCOVER or DHCPREQUEST at boot time, we have verified this with packet dumps. The dhcp client progress bar is displayed on the console but eventually times out, goes into background and the system continues booting.This is a problem because the timeout takes a long time and users have to wait. Sometimes the display manager is even started but users cannot using LDAP authentication. Eventually these systems just continue to use their old lease and networking works.Curiously, when we do a network restart after boot, the clients send DHCPDISCOVER/-REQUEST normally, we only have this problem at boot time.

On the server side we're using ISC dhcpcd-1.3.22pl4-223.13 on SLES 10 SP2. I have read about others who had the same problem, they switched from dhcpcd to dhclient. I have also tried this, but for us dhclient is not an option for a number of other reasons. Another thing I have tried is setting DHCLIENT_SLEEP ("Some interfaces need time to initialize. Add the latency time in seconds")o two minutes to give the interface time to initialize.nfortunately this didn't change anything.

View 6 Replies View Related

OpenSUSE Network :: Can't Browse Internet At University / Works Fine In Windows

Mar 30, 2011

I'm not able to connect to my university's internet facilities under openSUSE 11.4. I have been able to connect in the past and I am still able to connect in Windows 7.When I try to connect to the university WiFi, a valid IP address is assigned to me and the gateway address appears to be correct, so I don't see a problem in the DHCP negotations. Same with my university's Ethernet: I get a valid IP address, but I can't connect to the internet.When I browse to any site with Chromium/Chrome/ Firefox/lynx/curl, the page is stuck at "Sending request". I have tried disabling my firewall - that didn't solve anything.I don't know what else I can try and the campus' network administrators are puzzled. How can I resolve my issue?

View 7 Replies View Related

OpenSUSE Network :: Weirdness With WordPress On Localhost - An Unexpected HTTP Error Occurred During The API Request

Nov 25, 2010

I installed WordPress 3.x on my localhost/Apache server, but I can neither install plugins nor update anything.This happens with both the stable WP3.0 version and the 3.1 beta. When I try to search the Plugin Directory from the WP dashboard, I get this message: An Unexpected HTTP Error occurred during the API request.When I run an update, I get a page asking for the login credentials for the ftp user ("To perform the requested action, WordPress needs to access your web server. Please enter your FTP credentials to proceed. If you do not remember your credentials, you should contact your web host."). Since I'm part of the 'ftp' group on the system, I enter my system login information, click Proceed -- and get a blank page that does nothing.

I've gone to YaST, and I see that the system ftp user has a 6-character password (which may or may not be mine). I'm afraid to change it and risk screwing up other ftp-related functions. I'm running openSUSE 11.3, and am obsessive about updating. I will note that I have an old 2WIRE router that often requires me (including Zypper repos) to enter IP addresses instead of DNS-based URLs to successfully download stuff. Not sure if this is related, but just in case...

View 1 Replies View Related

Server :: Redirect All Client Http Request To Https Request In Squid?

Jun 25, 2010

how to redirect all client http request to https request in squid

View 1 Replies View Related

Fedora :: Nautilus Can't Browse Network

Dec 11, 2010

if I click on Network in the side bar I get Could not display "network:///" Nautilus cannot handle "network" locations.so how do I browse the "samba" network? why doesn't this work out of the box?

View 13 Replies View Related

Fedora :: Unable To Browse Network

Jul 4, 2011

I just installed FC15 from scratch, and everything seems to be working OK, except that I cannot view other computers on my local network. I didn't have any problems when I was running FC13.I am able to get on the internet, and view the website I configured on this machine, but anything "network" related I cannot see.But now when I open Network, I am presented with MYGROUP, WORKGROUP, and my domain name (which is my actual "workgroup" as I don't have a domain). I cannot get to any of them - get the same timeout error as above.

View 10 Replies View Related

Server :: Request From Unauthorized Host - Boot From Network Using PXE And NFS

Apr 25, 2011

In the sys-log from server there a lot of message like this: Code: Apr 25 10:38:45 server portmap[2569]: connect from 192.168.1.3 to getport(nfs): request from unauthorized host Apr 25 10:38:46 server portmap[2570]: connect from 192.168.1.3 to getport(nfs): request from unauthorized host 192.168.1.3 is a client that want to boot from netwrok using PXE and NFS. However it doesn't boot and enters (initramfs) prompt. Seems that the server deny the connection from client.

View 5 Replies View Related

Debian Configuration :: Unable To Browse Network

Dec 16, 2015

When in Thundar (on XFCE - Debian 8.2) and I click the "Network" icon in the left sidebar the following message is displayed.

Failed to open "/ on". Specified location is not supported.

View 4 Replies View Related

Ubuntu Installation :: Installed 9.10 Now Not Able To Browse Network

Jan 13, 2010

I had a 9.04 install that was working well within the network. I had a lot of shares setup from a windows 2003 server. Unfortunately, I had a hardware failure and had to upgrade. Also unfortunately, 9.04 would not install on the new hardware (MB/CPU/RAM), but I was able to install 9.10.Now my problem is I can not browse the windows network. I installed samba and followed the instructions found here

When I go to network through nautilus, I see a windows network icon, when I open it, there is nothing.I am at a loss and really need this problem resolved (work production computer)

View 1 Replies View Related

Ubuntu Networking :: How To Browse Windows Network

Mar 2, 2010

Ubuntu 9.10 now, before 9.04 was installed. On both versions I was unable to browse windows network - when I visit corresponding icon in nautilus, I see error message:
??????-???? -- ???????????? ??????.png
Looks like some service was missed at startup and not running.

View 5 Replies View Related

Networking :: Cannot Browse Network From Ubuntu / Resolve This?

May 23, 2010

I cannot browse the network from Ubuntu, but I can see the ubuntu machines from the windows including file and printing.
Nautilus gives the following error:
Could not display "network:///".
Nautilus cannot handle "network" locations.

Workgroup names all set the same
Sharing allowed on all machines

I have read all of the postings on this I think and have not been able to implement a solution.

View 6 Replies View Related

Ubuntu :: Browse Windows Network Directories?

Mar 26, 2011

Though File Manager allows me to browse Windows network directories ( Ctrl-L shows a path like smb://diskstation/mikeother/Web/Alta_Vista ), I can't figure out how to browse to them in applications like Firefox, which doesn't show "Network" as an option when doing File > Open. How can I browse to the Windows network within FF?

View 9 Replies View Related

Ubuntu :: Can't Browse Windows Network With Nautilus

Dec 16, 2010

Suddenly having trouble browsing the Windows Network with Nautilus.I can still mount a windows/samba share with cifs, but I don't want to do this because symbolic links within in the share do not work correctly. I can still browse the share with smb:// in a web browser.

View 1 Replies View Related

Ubuntu :: Netbook Edition - How To Browse Network

May 1, 2010

How to browse the network with Ubuntu Netbook Edition? In the destop edition I just go to 'Places - Network' and I'm good to go, but for the life of me I can't find anything that will allow me to do this in the netbook edition.

View 1 Replies View Related

Debian Configuration :: Network - Access Servers Request Failed

Feb 1, 2010

I recently installed two PC with debian lenny (kernel 2.6.26). One is called serveur-debian1 and the second one serveur-debian2. I have installed gnome,samba, mysql5, apache2, php5, and Virtualbox,bridge-tools on them. On serveur-debian2, i installed an other virtual debian lenny with apache2,mysql5,php5,nagios and centreon on it to view my network. I remember having installed a soft to access nntp on serveur-debian2 in order to test nagios.

Since a few days, i have problem to access to my servers. rom my windows 7 client, i try to ping serveur-debian1. Response is OK but not for all resquets Always from the same computer, i try to ping serveur-debian2. Response is OK but not for all again.

When i launch a ping on serveur-debian1 and serveur debian2 at the same time i have:

ping 1 to 10: serveur-debian1: response OK
serveur-debian2: no response
ping 11to 14: serveur-debian1: no response
serveur-debian2: response OK
ping 15 to 25: serveur-debian1: respone OK
serveur-debian2: @ip serveur-debian1 network unreachable (there's no error, it shows me the ip of serveur-debian1)

If i switch on the debian virtual server on the serveur-debian2, and i ping it at the same time, the response is OK for all resquests. The problem is very strange. I can't have a correct connection and when i launch a request from a software which access the mysql server, the requests failed ...

View 4 Replies View Related

Debian :: Thunar Doesn't Browse Local Network

Apr 2, 2016

I've configured Debian 8.3 on AMD quad cores Opteron, for change, i've choise XFCE4. The desktop work fine, but thunar doesn't browse my local network, i cannot see my other computer ! I think there are missing an applet ? but whitch it ?

View 2 Replies View Related

Debian :: Browse Network Not Working - The Specified Location Is Not Supported

May 25, 2015

Every time i try to click it, in the file manager, I get the error failed to open "/ on" The specified location is not supported.

I need to be able to connect to my storage server...

View 2 Replies View Related

Debian Configuration :: Cannot Browse Web When Network Eth1 Is Enabled?

Mar 30, 2010

Like the forum for #1I'm using debian 5.0 with a modem to connect to the internetand eth1 to network my home computers. When I try to browse the internet with Konqueror, I have to disable eth1 then wvdial just to browse the internet. How do I fix this?Note: My resolv.conf has my primary DNS address in it, for my ISP (nameserver 67.211.172.29) and so on.

View 2 Replies View Related

Debian Configuration :: Nautilus Can't Browse Local Network

Apr 21, 2010

I have a new Debian 5.04/ppc install on a G5 tower and it's not able to browse the local network. The clean install could see the network, then I installed the Samba server, and it hasn't worked since. Samba server never really worked, and I'm guessing I messed something up. I've reinstalled network-manager, and removed / reinstalled samba.

I have a small home network (6 machines) running wired and/or wireless, pc/mac and linux.This machine can PING other machines by name and IP address.This machine can PING itself by name and IP address
Other machines can PING this machine by IP address only, not by name.Nautilus network browser only shows the "Windows Network" icon, which, when clicked, shows an empty window.I've got networking up fine on all my other machines but this one is stumping me.

View 1 Replies View Related

Fedora Networking :: F13 VPN / Network Conflicts - Cannot Browse Internet

Sep 20, 2010

I'm using VPNC to connect to a remote cisco network, however I cannot browse the internet after the tunnel establishes. I know this is a DNS issue, as I can ping external address by IP (e.g. google). I can also communicate through the VPN tunnel without trouble.

/etc/resolv.conf gets updated by the VPNC with the remote networks DNS Servers, but I still cannot connect to the internet. I even manually tried to add my local nameserver to the /etc/resolv.conf file, without luck.

Also, just as a side note, I can only establish the tunnel via the command line "vpnc" command. I'm using Fedora 13 with KDE, but knetworkmanager / networkmanager will not establish the tunnel, however I haven't really dug very deep as to why. I've just setup some vpnc config files for loading the various connections manually, as needed.

View 1 Replies View Related

Ubuntu :: Browse The Network - Change Xubuntu Install To It?

Apr 3, 2011

I need to be able to browse the network. How can I change my xubuntu install to ubuntu?

View 1 Replies View Related

Ubuntu Networking :: VPN Connect But Cannot Browse Remote Network

Jul 6, 2011

I hope someone can help me as I am new to Linux and Ubuntu. I am running Ubuntu 11.04 and am trying to get VPN working properly with the pptp protocol. It is connecting but I cant seem to view folders or start a RDP session. I have tried this out with a Windows and a Linux machine and both work. The Linux machine was running Mint 10, in the vpn configuration I had set the gateway, user and pass, then in advanced mschap and mschapv2 were selected as well as mppe, allow bsd, allow deflate, and use tcp header. These settings work fine with Mint but its not working for me using Ubuntu. I did try to ping, sometimes it works sometimes it wont.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved