Every time i try to click it, in the file manager, I get the error failed to open "/ on" The specified location is not supported.
I need to be able to connect to my storage server...
When in Thundar (on XFCE - Debian 8.2) and I click the "Network" icon in the left sidebar the following message is displayed.
Failed to open "/ on". Specified location is not supported.
I've configured Debian 8.3 on AMD quad cores Opteron, for change, i've choise XFCE4. The desktop work fine, but thunar doesn't browse my local network, i cannot see my other computer ! I think there are missing an applet ? but whitch it ?
View 2 Replies View RelatedLike the forum for #1I'm using debian 5.0 with a modem to connect to the internetand eth1 to network my home computers. When I try to browse the internet with Konqueror, I have to disable eth1 then wvdial just to browse the internet. How do I fix this?Note: My resolv.conf has my primary DNS address in it, for my ISP (nameserver 67.211.172.29) and so on.
View 2 Replies View RelatedI have a new Debian 5.04/ppc install on a G5 tower and it's not able to browse the local network. The clean install could see the network, then I installed the Samba server, and it hasn't worked since. Samba server never really worked, and I'm guessing I messed something up. I've reinstalled network-manager, and removed / reinstalled samba.
I have a small home network (6 machines) running wired and/or wireless, pc/mac and linux.This machine can PING other machines by name and IP address.This machine can PING itself by name and IP address
Other machines can PING this machine by IP address only, not by name.Nautilus network browser only shows the "Windows Network" icon, which, when clicked, shows an empty window.I've got networking up fine on all my other machines but this one is stumping me.
I have a external harddisk attached to my linux PC.I have a laptop having windows 7 on my network.I want to to be able to open up the folder in the external harddisk(linux partition) and check the files from my laptop. People suggest samba. But I am not able to configure correctly. Please excuse me and give me few detailed instructions.
View 4 Replies View RelatedI have no idea what I'm doing so here goes: I installed Fedora and clicked the "encrypted" box during the process. What I want to do now is "browse" the volume using "File Browser" but I only get messages like, "Unable to mount location, org.freedesktop.DeviceKit.Disks.Error.Failed: Not a mountable file system". Why cannot I not see the files? I have the password. I would like to be able to move, delete, rename, etc files but that seems impossible because I cannot access the drive.
View 1 Replies View RelatedI am thinking about buying Belkin's Network USB Hub so that I can plugin usb devices and share it over network(Debian based computers). The device's website and spec can be found at: [URL]. Is this device supported by Debian Etch or Lenny? Did anyone used it on any versions of Debian
where it worked? Is there a Linux driver for it?
I'm working with a program that uses Open Motif to create all of the widgets, including the Open File dialog box (obviously). However, Open Motif being kinda old-timey, 80's vintage, and for the most part now an abandoned project, it is quite clunky. So, actually what I need to do is to open some files located on my work server. I have already successfully connected to the relevant server directories with Samba, and with programs built with GTK+ (such as GIMP) I can open files across the network because I have created a bookmark in Nautilus, and those bookmarks appear in the Open File dialog box created by GTK+. Now, Open Motif is different: it doesn't see network locations, orNautilus shortcuts. When I type "smb://serveripyadayada" in the search folder, it really doesn't like it and complains. So, what do I do? Can I get somehow Open Motif to open a network location? Or can I do a run-around and place a shortcut in the file system that points to the network location?
View 2 Replies View Relatedif you try to browse the web from the machine, or log in through a nomachine (nxclient/nxserver) session, it claims there is no internet conenction. You have to run System|Administration|Network and select the stored "Location" for our wired connection. There does not seem to be an option to make this (one and only) "Location" the default. If the machine is up and incoming connections are possible (samba & apache), surely outgoing connections should be working without extra fiddling?
The issue with nxserver (nomachine) becoming unavailable on a re-booted unattended machine (unless someone logs in AT THE MACHINE and runs System|Administration|Network) is causing problems for remote access.
Config: Squeeze, 2.6.32-5-amd64I just installed squeeze and the network is up and nm-manager deamon if working but the Gnome applet doesn't seem to work as usual. It indicates no network although the network is available as indicated by ifconfig and route below. When I switch WiFi on, the nm works flawlessly. When I click on the applet icon it says "Wired Network: device not supported" (or similar, msg in french is
eth0 Link encap:Ethernet HWaddr 00:1f:e2:12:ea:d8
inet adr:192.168.0.182 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::21f:e2ff:fe12:ead8/64 Scope:Lien
[code]...
I am attempting to setup a network to network VPN tunnel between our main office and a temporary location. This location need full VPN access back to the main office's network.Anyhow we have spent about 3 solid days attempting to make this work without any great success. Here is our network scheme for these two devices.
Network A (Main Office) (OpenBSD using isakmpd)
Network: 172.16.8.0/24
External IP: 1.1.1.1 (obviously not the real IP)[code].....
I am trying to download data/file from web server where htpassword has been setup, I have tried with browser it its working fine, but when trying to same with 'wget' its not working, how to download the file. Below is the command I am using. [URL]... admin[:]password (may be smily get overide)
View 4 Replies View Relatedif I click on Network in the side bar I get Could not display "network:///" Nautilus cannot handle "network" locations.so how do I browse the "samba" network? why doesn't this work out of the box?
View 13 Replies View RelatedI just installed FC15 from scratch, and everything seems to be working OK, except that I cannot view other computers on my local network. I didn't have any problems when I was running FC13.I am able to get on the internet, and view the website I configured on this machine, but anything "network" related I cannot see.But now when I open Network, I am presented with MYGROUP, WORKGROUP, and my domain name (which is my actual "workgroup" as I don't have a domain). I cannot get to any of them - get the same timeout error as above.
View 10 Replies View RelatedTomorrow I decided to dedicate 100% of my disk to opensuse! So I backed up the files from the remaining windows partition, deleted them and expanded the /home partition. Well, I ran into some problems during first boot. I referred to an article at the wiki and fixed it. Although I did some small fixing manually at the fstab file. The system booted! But I can't browse anywhere outside the local network! At this forum I found some info regarding the dmesg |tail command. Here is my output:
biduzido@biduNote:~> dmesg |tail
[ 1256.061852] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1256.061865] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 1256.061873] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 1256.061882] end_request: I/O error, dev sr0, sector 0
[ 1256.061890] Buffer I/O error on device sr0, logical block 0
[ 1256.062662] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1256.062672] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 1256.062682] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 1256.062690] end_request: I/O error, dev sr0, sector 0
[ 1256.062697] Buffer I/O error on device sr0, logical block 0
I use KVpnc and openVPN to connect to my desktop at work from my laptop at home. This works fine, I can reach my desktop at the office from my laptop at home. The only problem is that when the Vpn connection is active I cannot use a browser on my laptop. In fact, I cannot connect to anything outside the office Vpn (like mail, chat etc).
I suspected it had something to do with the DNS servers at the office not being reachable from the Vpn so I added my "regular" DNS servers to the /etc/resolve.conf used when the Vpn is active, I added two lines in total on the form "nameserver <ip-address>". This did not solve the problem. I have searched the KVpn forums without finding anything, and the same goes for the openSUSE forums. Does anybody else experience the same problem?
I had a 9.04 install that was working well within the network. I had a lot of shares setup from a windows 2003 server. Unfortunately, I had a hardware failure and had to upgrade. Also unfortunately, 9.04 would not install on the new hardware (MB/CPU/RAM), but I was able to install 9.10.Now my problem is I can not browse the windows network. I installed samba and followed the instructions found here
When I go to network through nautilus, I see a windows network icon, when I open it, there is nothing.I am at a loss and really need this problem resolved (work production computer)
Ubuntu 9.10 now, before 9.04 was installed. On both versions I was unable to browse windows network - when I visit corresponding icon in nautilus, I see error message:
??????-???? -- ???????????? ??????.png
Looks like some service was missed at startup and not running.
I cannot browse the network from Ubuntu, but I can see the ubuntu machines from the windows including file and printing.
Nautilus gives the following error:
Could not display "network:///".
Nautilus cannot handle "network" locations.
Workgroup names all set the same
Sharing allowed on all machines
I have read all of the postings on this I think and have not been able to implement a solution.
Though File Manager allows me to browse Windows network directories ( Ctrl-L shows a path like smb://diskstation/mikeother/Web/Alta_Vista ), I can't figure out how to browse to them in applications like Firefox, which doesn't show "Network" as an option when doing File > Open. How can I browse to the Windows network within FF?
View 9 Replies View RelatedSuddenly having trouble browsing the Windows Network with Nautilus.I can still mount a windows/samba share with cifs, but I don't want to do this because symbolic links within in the share do not work correctly. I can still browse the share with smb:// in a web browser.
View 1 Replies View RelatedHow to browse the network with Ubuntu Netbook Edition? In the destop edition I just go to 'Places - Network' and I'm good to go, but for the life of me I can't find anything that will allow me to do this in the netbook edition.
View 1 Replies View RelatedI'm using VPNC to connect to a remote cisco network, however I cannot browse the internet after the tunnel establishes. I know this is a DNS issue, as I can ping external address by IP (e.g. google). I can also communicate through the VPN tunnel without trouble.
/etc/resolv.conf gets updated by the VPNC with the remote networks DNS Servers, but I still cannot connect to the internet. I even manually tried to add my local nameserver to the /etc/resolv.conf file, without luck.
Also, just as a side note, I can only establish the tunnel via the command line "vpnc" command. I'm using Fedora 13 with KDE, but knetworkmanager / networkmanager will not establish the tunnel, however I haven't really dug very deep as to why. I've just setup some vpnc config files for loading the various connections manually, as needed.
I have openSUSE 11.2 64-bit KDE, I have installed it with lan cable connected, install updates and than switch to wireless.Everything worked great until I went to my girlfreind with laptop, there I can connect to router, use Skype but can't browse pages with firefox, can't install packages with YAST Also wired connection gives the same result but her PC have no problem with Internet.I have traied ifup, deleting /etc/resolv/conf, disabling NetworManager routing options with no succes
View 9 Replies View RelatedIn Network Settings in OpenSuse 11.1 while using "Traditional Method with ifup" I am able to set up a box as a server and connect via http over the net BUT Firefox cannot browse. If I switch to "User Controlled with NetworkManager" I can run Firefox but my server is not contactable. How do I do both?
View 4 Replies View RelatedI need to be able to browse the network. How can I change my xubuntu install to ubuntu?
View 1 Replies View RelatedI hope someone can help me as I am new to Linux and Ubuntu. I am running Ubuntu 11.04 and am trying to get VPN working properly with the pptp protocol. It is connecting but I cant seem to view folders or start a RDP session. I have tried this out with a Windows and a Linux machine and both work. The Linux machine was running Mint 10, in the vpn configuration I had set the gateway, user and pass, then in advanced mschap and mschapv2 were selected as well as mppe, allow bsd, allow deflate, and use tcp header. These settings work fine with Mint but its not working for me using Ubuntu. I did try to ping, sometimes it works sometimes it wont.
View 1 Replies View RelatedI have ran into a permissions problem. It seems that any file I have created with Fedora I can browse to in Firefox. I cannot browse to files that I have downloaded from the internet or copied locally across our network. I changed file permissions to 755 and 777 for these files. I even thought that maybe it was the php file content that was causing the issue. So, I copied the file content from file 2 into file 1. File 1 was the file I could always browse to since I created it in Fedora. I could still browse to file 1 after it had file 2's content.
I look at the permissions and they appear the same for both files. I am not sure why I cannot open the other files. I downloaded phpMyAdmin. I cannot hit any of these files in a browser. I also copied some files from a a backup location we have internally. I cannot browse to any of these files either. I used chmod 777 filename. Even after doing that I could not hit any of the files. I moved the files into my document root directory ( /var/www/html ) and I still cannot browse to these files.
I noticed tonight when I go to Places, Network, it will bring up an icon for Windows Network, and I can drill down to my Windows box. But I can't see the other Linux box (a laptop running Kubuntu), and the same behavior occurs on the laptop when trying to view the Linux desktop. The laptop is connected wirelessly, if that makes a difference. Each box can ping the others, but I don't yet know how to browse one Linux box from the other Linux box.
View 1 Replies View Related